Commit Graph

822 Commits

Author SHA1 Message Date
Jiri Denemark
266265a560 qemu: Setup infrastructure for HMP passthrough
JSON monitor command implementation can now just directly call text
monitor implementation and it will be automatically encapsulated into
QMP's human-monitor-command.
2011-03-10 14:36:04 +01:00
Jiri Denemark
3b8bf4a3a9 qemu: Fix warnings in event handlers
Some qemu monitor event handlers were issuing inadequate warning when
virDomainSaveStatus() failed. They copied the message from I/O error
handler without customizing it to provide better information on why
virDomainSaveStatus() was called.
2011-03-10 14:18:37 +01:00
Eric Blake
340ab27dd2 audit: also audit cgroup ACL permissions
* src/qemu/qemu_audit.h (qemuAuditCgroupMajor)
(qemuAuditCgroupPath): Add parameter.
* src/qemu/qemu_audit.c (qemuAuditCgroupMajor)
(qemuAuditCgroupPath): Add 'acl=rwm' to cgroup audit entries.
* src/qemu/qemu_cgroup.c: Update clients.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Likewise.
2011-03-09 11:36:59 -07:00
Eric Blake
5564c57528 cgroup: allow fine-tuning of device ACL permissions
Adding audit points showed that we were granting too much privilege
to qemu; it should not need any mknod rights to recreate any
devices.  On the other hand, lxc should have all device privileges.
The solution is adding a flag parameter.

This also lets us restrict write access to read-only disks.

* src/util/cgroup.h (virCgroup*Device*): Adjust prototypes.
* src/util/cgroup.c (virCgroupAllowDevice)
(virCgroupAllowDeviceMajor, virCgroupAllowDevicePath)
(virCgroupDenyDevice, virCgroupDenyDeviceMajor)
(virCgroupDenyDevicePath): Add parameter.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Update clients.
* src/lxc/lxc_controller.c (lxcSetContainerResources): Likewise.
* src/qemu/qemu_cgroup.c: Likewise.
(qemuSetupDiskPathAllow): Also, honor read-only disks.
2011-03-09 11:35:36 -07:00
Eric Blake
48096a0064 audit: rename remaining qemu audit functions
Also add ATTRIBUTE_NONNULL markers.

* src/qemu/qemu_audit.h: The pattern qemuDomainXXXAudit is
inconsistent; prefer qemuAuditXXX instead.
* src/qemu/qemu_audit.c: Reflect the renames.
* src/qemu/qemu_driver.c: Likewise.
* src/qemu/qemu_hotplug.c: Likewise.
* src/qemu/qemu_migration.c: Likewise.
* src/qemu/qemu_process.c: Likewise.
2011-03-09 11:35:20 -07:00
Eric Blake
f2512684ad audit: also audit cgroup controller path
Although the cgroup device ACL controller path can be worked out
by researching the code, it is more efficient to include that
information directly in the audit message.

* src/util/cgroup.h (virCgroupPathOfController): New prototype.
* src/util/cgroup.c (virCgroupPathOfController): Export.
* src/libvirt_private.syms: Likewise.
* src/qemu/qemu_audit.c (qemuAuditCgroup): Use it.
2011-03-09 10:19:17 -07:00
Eric Blake
d04916faae audit: split cgroup audit types to allow more information
Device names can be manipulated, so it is better to also log
the major/minor device number corresponding to the cgroup ACL
changes that libvirt made.  This required some refactoring
of the relatively new qemu cgroup audit code.

Also, qemuSetupChardevCgroup was only auditing on failure, not success.

* src/qemu/qemu_audit.h (qemuDomainCgroupAudit): Delete.
(qemuAuditCgroup, qemuAuditCgroupMajor, qemuAuditCgroupPath): New
prototypes.
* src/qemu/qemu_audit.c (qemuDomainCgroupAudit): Rename...
(qemuAuditCgroup): ...and drop a parameter.
(qemuAuditCgroupMajor, qemuAuditCgroupPath): New functions, to
allow listing device major/minor in audit.
(qemuAuditGetRdev): New helper function.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Adjust callers.
* src/qemu/qemu_cgroup.c (qemuSetupDiskPathAllow)
(qemuSetupHostUsbDeviceCgroup, qemuSetupCgroup)
(qemuTeardownDiskPathDeny): Likewise.
(qemuSetupChardevCgroup): Likewise, fixing missing audit.
2011-03-09 09:08:10 -07:00
Eric Blake
30ad48836e audit: tweak audit messages to match conventions
* src/qemu/qemu_audit.c (qemuDomainHostdevAudit): Avoid use of
"type", which has a pre-defined meaning.
(qemuDomainCgroupAudit): Likewise, as well as "item".
2011-03-09 08:11:31 -07:00
Cole Robinson
9189301426 Don't overwrite virRun error messages
virRun gives pretty useful error output, let's not overwrite it unless there
is a good reason. Some places were providing more information about what
the commands were _attempting_ to do, however that's usually less useful from
a debugging POV than what actually happened.
2011-03-09 08:53:12 -05:00
Hu Tao
83d35233a9 Fix a wrong error message thrown to user
* src/qemu/qemu_driver.c: qemuDomainUpdateDeviceFlags() is not disk
  specific as the message suggests
2011-03-09 20:09:25 +08:00
Wen Congyang
0e29f71135 support to detach USB disk
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
2011-03-07 11:40:12 -07:00
Wen Congyang
8f338032b9 rename qemuDomainDetachSCSIDiskDevice to qemuDomainDetachDiskDevice
The way to detach a USB disk is the same as that to detach a SCSI
disk. Rename this function and we can use it to detach a USB disk.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
2011-03-07 11:28:15 -07:00
Cole Robinson
56a4d8127f qemu_hotplug: Reword error if spice password change not available
Currently it sounds like spice is completely unsupported, which is
confusing.
2011-03-07 13:26:46 -05:00
Osier Yang
82dfc6f38e qemu: Support vram for video of qxl type
For qemu names the primary vga as "qxl-vga":

  1) if vram is specified for 2nd qxl device:

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,vram_size=$SIZE,...

  2) if vram is not specified for 2nd qxl device, (use the default
     set by global):

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,...

For qemu names all qxl devices as "qxl":

  1) if vram is specified for 2nd qxl device:

    -vga qxl -global qxl.vram_size=$SIZE \
    -device qxl,id=video1,vram_size=$SIZE ...

  2) if vram is not specified for 2nd qxl device:

    -vga qxl -global qxl-vga.vram_size=$SIZE \
    -device qxl,id=video1,...

"-global" is the only way to define vram_size for the primary qxl
device, regardless of how qemu names it, (It's not good a good
way, as original idea of "-global" is to set a global default for
a driver property, but to specify vram for first qxl device, we
have to use it).

For other qxl devices, as they are represented by "-device", could
specify it directly and seperately for each, and it overrides the
default set by "-global" if specified.

v1 - v2:
  * modify "virDomainVideoDefaultRAM" so that it returns 16M as the
    default vram_size for qxl device.

  * vram_size * 1024 (qemu accepts bytes for vram_size).

  * apply default vram_size for qxl device for which vram_size is
    not specified.

  * modify "graphics-spice" tests (more sensiable vram_size)

  * Add an argument of virDomainDefPtr type for qemuBuildVideoDevStr,
    to use virDomainVideoDefaultRAM in qemuBuildVideoDevStr).

v2 - v3:
  * Modify default video memory size for qxl device from 16M to 24M

  * Update codes to be consistent with changes on qemu_capabilities.*
2011-03-06 22:00:27 +08:00
Laine Stump
f8ac67909d qemu: avoid corruption of domain hashtable and misuse of freed domains
This was also found while investigating

   https://bugzilla.redhat.com/show_bug.cgi?id=670848

An EOF on a domain's monitor socket results in an event being queued
to handle the EOF. The handler calls qemuProcessHandleMonitorEOF. If
it is a transient domain, this leads to a call to
virDomainRemoveInactive, which removes the domain from the driver's
hashtable and unref's it. Nowhere in this code is the qemu driver lock
acquired.

However, all modifications to the driver's domain hashtable *must* be
done while holding the driver lock, otherwise the hashtable can become
corrupt, and (even more likely) another thread could call a different
hashtable function and acquire a pointer to the domain that is in the
process of being destroyed.

To prevent such a disaster, qemuProcessHandleMonitorEOF must get the
qemu driver lock *before* it gets the DomainObj's lock, and hold it
until it is finished with the DomainObj. This guarantees that nobody
else modifies the hashtable at the same time, and that anyone who had
already gotten the DomainObj from the hashtable prior to this call has
finished with it before we remove/destroy it.
2011-03-04 08:13:11 -05:00
Laine Stump
e570ca1246 qemu: Add missing lock of virDomainObj before calling virDomainUnref
This was found while researching the root cause of:

https://bugzilla.redhat.com/show_bug.cgi?id=670848

virDomainUnref should only be called with the lock held for the
virDomainObj in question. However, when a transient qemu domain gets
EOF on its monitor socket, it queues an event which frees the monitor,
which unref's the virDomainObj without first locking it. If another
thread has already locked the virDomainObj, the modification of the
refcount could potentially be corrupted. In an extreme case, it could
also be potentially unlocked by virDomainObjFree, thus left open to
modification by anyone else who would have otherwise waited for the
lock (not to mention the fact that they would be accessing freed
data!).

The solution is to have qemuMonitorFree lock the domain object right
before unrefing it. Since the caller to qemuMonitorFree doesn't expect
this lock to be held, if the refcount doesn't go all the way to 0,
qemuMonitorFree must unlock it after the unref.
2011-03-04 08:12:58 -05:00
Eric Blake
4f805dcdc4 qemu: avoid double close on domain restore
qemudDomainSaveImageStartVM was evil - it closed the incoming fd
argument on some, but not all, code paths, without informing the
caller about that action.  No wonder that this resulted in
double-closes: https://bugzilla.redhat.com/show_bug.cgi?id=672725

* src/qemu/qemu_driver.c (qemudDomainSaveImageStartVM): Alter
signature, to avoid double-close.
(qemudDomainRestore, qemudDomainObjRestore): Update callers.
2011-03-02 08:58:49 -07:00
Eric Blake
7c6b22c4d5 qemu: only request sound cgroup ACL when required
When a SPICE or VNC graphics controller is present, and sound is
piggybacked over a channel to the graphics device rather than
directly accessing host hardware, then there is no need to grant
host hardware access to that qemu process.

* src/qemu/qemu_cgroup.c (qemuSetupCgroup): Prevent sound with
spice, and with vnc when vnc_allow_host_audio is 0.
Reported by Daniel Berrange.
2011-02-28 09:42:25 -07:00
Daniel P. Berrange
16ba2aafc4 Allow hash tables to use generic pointers as keys
Relax the restriction that the hash table key must be a string
by allowing an arbitrary hash code generator + comparison func
to be provided

* util/hash.c, util/hash.h: Allow any pointer as a key
* internal.h: Include stdbool.h as standard.
* conf/domain_conf.c, conf/domain_conf.c,
  conf/nwfilter_params.c, nwfilter/nwfilter_gentech_driver.c,
  nwfilter/nwfilter_gentech_driver.h, nwfilter/nwfilter_learnipaddr.c,
  qemu/qemu_command.c, qemu/qemu_driver.c,
  qemu/qemu_process.c, uml/uml_driver.c,
  xen/xm_internal.c: s/char */void */ in hash callbacks
2011-02-25 13:00:54 +00:00
Daniel P. Berrange
6952708ca4 Remove deallocator parameter from hash functions
Since the deallocator is passed into the constructor of
a hash table it is not desirable to pass it into each
function again. Remove it from all functions, but provide
a virHashSteal to allow a item to be removed from a hash
table without deleteing it.

* src/util/hash.c, src/util/hash.h: Remove deallocator
  param from all functions. Add virHashSteal
* src/libvirt_private.syms: Add virHashSteal
* src/conf/domain_conf.c, src/conf/nwfilter_params.c,
  src/nwfilter/nwfilter_learnipaddr.c,
  src/qemu/qemu_command.c, src/xen/xm_internal.c: Update
  for changed hash API
2011-02-25 13:00:46 +00:00
Eric Blake
1aaef5ad72 audit: audit qemu pci and usb device passthrough
* src/qemu/qemu_audit.h (qemuDomainHostdevAudit): New prototype.
* src/qemu/qemu_audit.c (qemuDomainHostdevAudit): New function.
(qemuDomainStartAudit): Call as appropriate.
* src/qemu/qemu_hotplug.c (qemuDomainAttachHostPciDevice)
(qemuDomainAttachHostUsbDevice, qemuDomainDetachHostPciDevice)
(qemuDomainDetachHostUsbDevice): Likewise.
2011-02-24 13:32:17 -07:00
Eric Blake
e25f2c74df audit: audit qemu memory and vcpu adjusments
* src/qemu/qemu_audit.h (qemuDomainMemoryAudit)
(qemuDomainVcpuAudit): New prototypes.
* src/qemu/qemu_audit.c (qemuDomainResourceAudit)
(qemuDomainMemoryAudit, qemuDomainVcpuAudit): New functions.
(qemuDomainStartAudit): Call as appropriate.
* src/qemu/qemu_driver.c (qemudDomainSetMemory)
(qemudDomainHotplugVcpus): Likewise.
2011-02-24 13:32:17 -07:00
Eric Blake
6bb98d419f audit: add qemu hooks for auditing cgroup events
* src/qemu/qemu_audit.h (qemuDomainCgroupAudit): New prototype.
* src/qemu/qemu_audit.c (qemuDomainCgroupAudit): Implement it.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Add audit.
* src/qemu/qemu_cgroup.c (qemuSetupDiskPathAllow)
(qemuSetupChardevCgroup, qemuSetupHostUsbDeviceCgroup)
(qemuSetupCgroup, qemuTeardownDiskPathDeny): Likewise.
2011-02-24 13:32:15 -07:00
Eric Blake
b4d3434fc2 audit: prepare qemu for listing vm in cgroup audits
* src/qemu/qemu_cgroup.h (struct qemuCgroupData): New helper type.
(qemuSetupDiskPathAllow, qemuSetupChardevCgroup)
(qemuTeardownDiskPathDeny): Drop unneeded prototypes.
(qemuSetupDiskCgroup, qemuTeardownDiskCgroup): Adjust prototype.
* src/qemu/qemu_cgroup.c
(qemuSetupDiskPathAllow, qemuSetupChardevCgroup)
(qemuTeardownDiskPathDeny): Mark static and use new type.
(qemuSetupHostUsbDeviceCgroup): Use new type.
(qemuSetupDiskCgroup): Alter signature.
(qemuSetupCgroup): Adjust caller.
* src/qemu/qemu_hotplug.c (qemuDomainAttachHostUsbDevice)
(qemuDomainDetachPciDiskDevice, qemuDomainDetachSCSIDiskDevice):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainAttachDevice)
(qemuDomainUpdateDeviceFlags): Likewise.
2011-02-24 13:31:05 -07:00
Eric Blake
061738764d cgroup: determine when skipping non-devices
* src/util/cgroup.c (virCgroupAllowDevicePath)
(virCgroupDenyDevicePath): Don't fail with EINVAL for
non-devices.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Update caller.
* src/qemu/qemu_cgroup.c (qemuSetupDiskPathAllow)
(qemuSetupChardevCgroup, qemuSetupHostUsbDeviceCgroup)
(qemuSetupCgroup, qemuTeardownDiskPathDeny): Likewise.
2011-02-24 13:31:05 -07:00
Daniel P. Berrange
35416720c2 Put <stdbool.h> into internal.h so it is available everywhere
Remove the <stdbool.h> header from all source files / headers
and just put it into internal.h

* src/internal.h: Add <stdbool.h>
2011-02-24 12:04:06 +00:00
Jiri Denemark
9fc4b6a606 qemu: Switch over command line capabilities to virBitmap
This is done for two reasons:
- we are getting very close to 64 flags which is the maximum we can use
  with unsigned long long
- by using LL constants in enum we already violates C99 constraint that
  enum values have to fit into int
2011-02-24 12:10:00 +01:00
Jiri Denemark
23d935bd97 qemu: Rename qemud\?CmdFlags to qemuCaps
The new name complies more with the fact that it contains a set of
qemuCapsFlags.
2011-02-24 12:08:34 +01:00
Jiri Denemark
a96d08dc53 qemu: Use helper functions for handling cmd line capabilities
Three new functions (qemuCapsSet, qemuCapsClear, and qemuCapsGet) were
introduced replacing direct bit operations.
2011-02-24 12:07:06 +01:00
Jiri Denemark
21642e82b1 qemu: Rename QEMUD_CMD_FLAG_* to QEMU_CAPS_*
The new names comply more with the fact that they are all members of
enum qemuCapsFlags.
2011-02-24 12:05:39 +01:00
Eric Blake
009fce98be security: avoid memory leak
Leak introduced in commit d6623003.

* src/qemu/qemu_driver.c (qemuSecurityInit): Avoid leak on failure.
* src/security/security_stack.c (virSecurityStackClose): Avoid
leaking component drivers.
2011-02-22 09:50:34 -07:00
Wen Congyang
cf61114cee protect the scsi controller to be deleted when it is in use
Steps to reproduce this bug:
1. virsh attach-disk domain --source imagefile --target sdb --sourcetype file --driver qemu --subdriver raw
2. virsh detach-device controller.xml # remove scsi controller 0
3. virsh detach-disk domain sdb
   error: Failed to detach disk
   error: operation failed: detaching scsi0-0-1 device failed: Device 'scsi0-0-1' not found

I think we should not detach a controller when it is used by some other device.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
2011-02-21 10:38:19 -07:00
Eric Blake
994e7567b6 maint: kill all remaining uses of old DEBUG macro
Done mechanically with:
$ git grep -l '\bDEBUG0\? *(' | xargs -L1 sed -i 's/\bDEBUG0\? *(/VIR_&/'

followed by manual deletion of qemudDebug in daemon/libvirtd.c, along
with a single 'make syntax-check' fallout in the same file, and the
actual deletion in src/util/logging.h.

* src/util/logging.h (DEBUG, DEBUG0): Delete.
* daemon/libvirtd.h (qemudDebug): Likewise.
* global: Change remaining clients over to VIR_DEBUG counterpart.
2011-02-21 08:46:52 -07:00
Eric Blake
03ba07cb73 hash: make virHashFree more free-like
Two-argument free functions are uncommon; match the style elsewhere
by caching the callback at creation.

* src/util/hash.h (virHashCreate, virHashFree): Move deallocator
argument to creation.
* cfg.mk (useless_free_options): Add virHashFree.
* src/util/hash.c (_virHashTable): Track deallocator.
(virHashCreate, virHashFree): Update to new signature.
* src/conf/domain_conf.c (virDomainObjListDeinit)
(virDomainObjListInit, virDomainDiskDefForeachPath)
(virDomainSnapshotObjListDeinit, virDomainSnapshotObjListInit):
Update callers.
* src/conf/nwfilter_params.c (virNWFilterHashTableFree)
(virNWFilterHashTableCreate): Likewise.
* src/conf/nwfilter_conf.c (virNWFilterTriggerVMFilterRebuild):
Likewise.
* src/cpu/cpu_generic.c (genericHashFeatures, genericBaseline):
Likewise.
* src/xen/xm_internal.c (xenXMOpen, xenXMClose): Likewise.
* src/nwfilter/nwfilter_learnipaddr.c (virNWFilterLearnInit)
(virNWFilterLearnShutdown): Likewise.
* src/qemu/qemu_command.c (qemuDomainPCIAddressSetCreate)
(qemuDomainPCIAddressSetFree): Likewise.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Likewise.
2011-02-21 08:27:02 -07:00
Jim Fehlig
efc2594b4e Do not add drive 'boot=on' param when a kernel is specified
libvirt-tck was failing several domain tests [1] with qemu 0.14, which
is now less tolerable of specifying 2 bootroms with the same boot index [2].

Drop the 'boot=on' param if kernel has been specfied.

[1] https://www.redhat.com/archives/libvir-list/2011-February/msg00559.html
[2] http://lists.nongnu.org/archive/html/qemu-devel/2011-02/msg01892.html
2011-02-17 20:32:48 -07:00
Christophe Fergeau
50daaa0a3e remove duplicated call to reportOOMError 2011-02-17 17:12:23 -07:00
Christophe Fergeau
7b9a509953 don't check for NULL before calling virHashFree
virHashFree follows the convention described in HACKING that
XXXFree() functions can be called with a NULL argument.
2011-02-17 17:02:32 -07:00
Christophe Fergeau
9905c69e4f remove no longer needed calls to virReportOOMError
Now that the virHash handling functions call virReportOOMError by
themselves when needed, users of the virHash API no longer need to
do it by themselves. Since users of the virHash API were not
consistently calling virReportOOMError after memory failures from
the virHash code, this has the added benefit of making OOM
reporting from this code more consistent and reliable.
2011-02-17 16:59:14 -07:00
Wen Congyang
34c13d0d1a check more error info about whether drive_add failed
When we attach a disk, but we specify a wrong format of disk image,
qemu monitor command drive_add will fail, but libvirt does not detect
this error.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
2011-02-17 14:10:26 -07:00
Laine Stump
13ae7a02b3 Allow brAddTap to create a tap device that is down
An upcoming patch has a use for a tap device to be created that
doesn't need to be actually put into the "up" state, and keeping it
"down" keeps the output of ifconfig from being unnecessarily cluttered
(ifconfig won't show down interfaces unless you add "-a").

bridge.[ch]: add "up" as an arg to brAddTap()
uml_conf.c, qemu_command.c: add "up" (set to "true") to brAddTap() call.
2011-02-17 13:36:22 -05:00
Laine Stump
e9bd5c0e24 Add txmode attribute to interface XML for virtio backend
This is in response to:

   https://bugzilla.redhat.com/show_bug.cgi?id=629662

Explanation

qemu's virtio-net-pci driver allows setting the algorithm used for tx
packets to either "bh" or "timer". This is done by adding ",tx=bh" or
",tx=timer" to the "-device virtio-net-pci" commandline option.

'bh' stands for 'bottom half'; when this is set, packet tx is all done
in an iothread in the bottom half of the driver. (In libvirt, this
option is called the more descriptive "iothread".)

'timer' means that tx work is done in qemu, and if there is more tx
data than can be sent at the present time, a timer is set before qemu
moves on to do other things; when the timer fires, another attempt is
made to send more data. (libvirt retains the name "timer" for this
option.)

The resulting difference, according to the qemu developer who added
the option is:

    bh makes tx more asynchronous and reduces latency, but potentially
    causes more processor bandwidth contention since the cpu doing the
    tx isn't necessarily the cpu where the guest generated the
    packets.

Solution

This patch provides a libvirt domain xml knob to change the option on
the qemu commandline, by adding a new attribute "txmode" to the
<driver> element that can be placed inside any <interface> element in
a domain definition. It's use would be something like this:

    <interface ...>
      ...
      <model type='virtio'/>
      <driver txmode='iothread'/>
      ...
    </interface>

I chose to put this setting as an attribute to <driver> rather than as
a sub-element to <tune> because it is specific to the virtio-net
driver, not something that is generally usable by all network drivers.
(note that this is the same placement as the "driver name=..."
attribute used to choose kernel vs. userland backend for the
virtio-net driver.)

Actually adding the tx=xxx option to the qemu commandline is only done
if the version of qemu being used advertises it in the output of

    qemu -device virtio-net-pci,?

If a particular txmode is requested in the XML, and the option isn't
listed in that help output, an UNSUPPORTED_CONFIG error is logged, and
the domain fails to start.
2011-02-17 11:07:58 -05:00
Laine Stump
b670a41206 Restructure domain struct interface "driver" data for easier expansion
When the <driver> element (and its "name" attribute) was added to the
domain XML's interface element, a "backend" enum was simply added to
the toplevel of the virDomainNetDef struct.

Ignoring the naming inconsistency ("name" vs. "backend"), this is fine
when there's only a single item contained in the driver element of the
XML, but doesn't scale well as we add more attributes that apply to
the backend of the virtio-net driver, or add attributes applicable to
other drivers.

This patch changes virDomainNetDef in two ways:

1) Rename the item in the struct from "backend" to "name", so that
   it's the same in the XML and in the struct, hopefully avoiding
   confusion for someone unfamiliar with the function of the
   attribute.

2) Create a "driver" union within virDomainNetDef, and a "virtio"
   struct in that struct, which contains the "name" enum value.

3) Move around the virDomainNetParse and virDomainNetFormat functions
   to allow for simple plugin of new attributes without disturbing
   existing code. (you'll note that this results in a seemingly
   redundant if() in the format function, but that will no longer be
   the case as soon as a 2nd attribute is added).

In the future, new attributes for the virtio driver backend can be
added to the "virtio" struct, and any other network device backend that
needs an attribute will have its own struct added to the "driver"
union.
2011-02-17 11:07:45 -05:00
Daniel P. Berrange
766de43533 Move all the QEMU migration code to a new file
The introduction of the v3 migration protocol, along with
support for migration cookies, will significantly expand
the size of the migration code. Move it all to a separate
file to make it more manageable

The functions are not moved 100%. The API entry points
remain in the main QEMU driver, but once the public
virDomainPtr is resolved to the internal virDomainObjPtr,
all following code is moved.

This will allow the new v3 API entry points to call into the
same shared internal migration functions

* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add
  qemuDomainFormatXML helper method
* src/qemu/qemu_driver.c: Remove all migration code
* src/qemu/qemu_migration.c, src/qemu/qemu_migration.h: Add
  all migration code.
2011-02-17 12:56:10 +00:00
Daniel P. Berrange
48c2d6c65b Split all QEMU process mangement code into separate file
Move the qemudStartVMDaemon and qemudShutdownVMDaemon
methods into a separate file, renaming them to
qemuProcessStart, qemuProcessStop. All helper methods
called by these are also moved & renamed to match

* src/Makefile.am: Add qemu_process.c/.h
* src/qemu/qemu_command.c: Add qemuDomainAssignPCIAddresses
* src/qemu/qemu_command.h: Add VNC port min/max
* src/qemu/qemu_domain.c, src/qemu/qemu_domain.h: Add
  domain event queue helpers
* src/qemu/qemu_driver.c, src/qemu/qemu_driver.h: Remove
  all QEMU process startup/shutdown functions
* src/qemu/qemu_process.c, src/qemu/qemu_process.h: Add
  all QEMU process startup/shutdown functions
2011-02-17 12:48:55 +00:00
Osier Yang
cd951ad2ec qemu: Error prompt when saving a shutoff domain
"qemudDomainSaveFlag" goto wrong label "endjob", which will cause
error when security manager trying to restore label (regression).

As it's more reasonable to check if vm is shutoff immediately, and
return right away if it is, remove the checking in "qemudDomainSaveFlag",
and add checking in "qemudDomainSave".

* src/qemu/qemu_driver.c
2011-02-17 11:18:47 +08:00
Jiri Denemark
453d05dab9 qemu: Fix command line generation with faked host CPU
The code expected that host CPU architecture matches the architecture on
which libvirt runs. This is normally true but not in tests, where host
CPU is faked to produce consistent results.
2011-02-15 22:51:50 +01:00
Eric Blake
c106a83712 docs: fix typos
* docs/drvopenvz.html.in: Spell administrator correctly.
* docs/drvuml.html.in: Likewise.
* src/qemu/qemu.conf: Likewise.  Fix other typos, too.
2011-02-15 13:50:28 -07:00
Eric Blake
56152be578 qemu: don't mask real error with oom report
* src/qemu/qemu_command.c (qemuBuildCommandLine): Don't report oom
after qemuBuildControllerDevStr, which reported its own errors.
2011-02-15 10:43:39 -07:00
Eric Blake
abaa65605f qemu: avoid NULL derefs
The processWatchdogEvent fix is real, although it can only trigger
on OOM, since bad things happen if doCoreDump is called with a NULL
pathname argument.  The other fixes silence clang, but aren't a real
bug because virReportErrorHelper tolerates a NULL format string even
though *printf does not.

* src/qemu/qemu_driver.c (processWatchdogEvent): Exit on OOM.
(qemuDomainIsActive, qemuDomainIsPersistent, qemuDomainIsUpdated):
Provide valid message.
2011-02-15 09:55:45 -07:00
Eric Blake
0cca53921d qemu: avoid NULL deref on error
* src/qemu/qemu_command.c (qemuParseCommandLineDisk): Report error
before cleaning def.
2011-02-14 17:34:05 -07:00