Previously, no one was using virStorageFileGetMetadata, and for good
reason - it couldn't support root-squash NFS. Change the signature
and make it useful to future patches, including enhancing the metadata
to recursively track the entire chain.
* src/util/storage_file.h (_virStorageFileMetadata): Add field.
(virStorageFileGetMetadata): Alter signature.
* src/util/storage_file.c (virStorageFileGetMetadata): Rewrite.
(virStorageFileGetMetadataRecurse): New function.
(virStorageFileFreeMetadata): Handle recursion.
Backing chains can end on a network protocol, such as nbd:xxx; we
should not attempt to probe the file system in this case.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Only probe files.
This is the last use of raw strings for disk formats throughout
the src/conf directory.
* src/conf/snapshot_conf.h (_virDomainSnapshotDiskDef): Store enum
rather than string for disk type.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefClear)
(virDomainSnapshotDiskDefParseXML, virDomainSnapshotDefFormat):
Adjust users.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
Express the default disk type as an enum, for easier handling.
* src/conf/capabilities.h (_virCaps): Store enum rather than
string for disk type.
* src/conf/domain_conf.c (virDomainDiskDefParseXML): Adjust
clients.
* src/qemu/qemu_driver.c (qemuCreateCapabilities): Likewise.
At one point, the code passed through arbitrary strings for file
formats, which supposedly lets qemu handle a new file type even
before libvirt has been taught to handle it. However, to properly
label files, libvirt has to learn the file type anyway, so we
might as well make our life easier by only accepting file types
that we are prepared to handle. This patch lets the RNG validation
ensure that only known strings are let through.
* docs/schemas/domaincommon.rng (driverFormat): Limit to list of
supported strings.
* docs/schemas/domainsnapshot.rng (driver): Likewise.
We have historically allowed 'aio' as a synonym for 'raw' for
back-compat to xen, but since a future patch will move to using
an enum value, we have to pick one to be our preferred output
name. This is a slight change in the output XML, but the sexpr
and xm outputs should still be identical, and the input XML can
still use either form.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Move aio
back-compat...
(virDomainDiskDefParseXML): ...to parse time.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenFormatSxprDisk): ...and
to output time.
* src/xenxs/xen_xm.c (xenParseXM, xenFormatXMDisk): Likewise.
* tests/sexpr2xmldata/sexpr2xml-*.xml: Update tests.
When an image has no backing file, using VIR_STORAGE_FILE_AUTO
for its type is a bit confusing. Additionally, a future patch
would like to reserve a default value for the case of no file
type specified in the XML, but different from the current use
of -1 to imply probing, since probing is not always safe.
Also, a couple of file types were missing compared to supported
code: libxl supports 'vhd', and qemu supports 'fat' for directories
passed through as a file system.
* src/util/storage_file.h (virStorageFileFormat): Add
VIR_STORAGE_FILE_NONE, VIR_STORAGE_FILE_FAT, VIR_STORAGE_FILE_VHD.
* src/util/storage_file.c (virStorageFileMatchesVersion): Match
documentation when version probing not supported.
(cowGetBackingStore, qcowXGetBackingStore, qcow1GetBackingStore)
(qcow2GetBackingStoreFormat, qedGetBackingStore)
(virStorageFileGetMetadataFromBuf)
(virStorageFileGetMetadataFromFD): Take NONE into account.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Likewise.
* src/conf/storage_conf.c (virStorageVolumeFormatFromString): New
function.
(poolTypeInfo): Use it.
AUTHORS.in tracks the maintainers, as well as some folks who were
previously in AUTHORS but don't have a git commit with proper
attribution.
Generated output is sorted alphabetically and lacks pretty spacing, so
tweak AUTHORS.in to follow the same format.
Additionally, drop the syntax-check rule that previously validated
AUTHORS against git log.
Relabeling tapfd right after the tap device is created.
qemuPhysIfaceConnect is common function called both for static
netdevs and for hotplug netdevs.
Having hostuuid in migration cookie is a nice bonus since it provides an
easy way of detecting migration to the same host. However, requiring it
breaks backward compatibility with older libvirt releases.
Recently, patches were added support for (managed)saving, restoring, and
migrating domains with host USB devices. However, qemu driver would
still forbid migration of such domains because qemuMigrationIsAllowed
was not updated.
If we can't probe the architecture from QMP we parse the architecture
from the qemu binaries name. This results in the architecture being i386
instead of i686 which then results in QEMU_CAPS_PCI_MULTIBUS being unset
which gives a broken qemu command line.
This probably didn't show up earlier since most of the time there's also
a /usr/bin/qemu around which results in i686 capabilities.
which frees all allocated memory but doesn't set the passed pointer to
NULL. Therefore, we must do it ourselves. This is causing actual
libvirtd crash: Basically, when doing 'virsh net-edit' the newDef should
be dropped. And the memory is freed, indeed. However, the pointer is
not set to NULL but kept instead. And the next duo of calls 'virsh
net-start' and 'virsh net-destroy' starts the disaster. The latter one
does the same as 'virsh destroy'; it sees that newDef is nonNULL so it
replaces def with newDef (which has been freed already as said a few
lines above). Therefore any subsequent call accessing def will hit the ground.
When libvirt cannot find a suitable CPU model for host CPU (easily
reproducible by running libvirt in a guest), it would not provide CPU
topology in capabilities XML either. Even though CPU topology is known
and can be queried by virNodeGetInfo. With this patch, CPU topology will
always be provided in capabilities XML regardless on the presence of CPU
model.
This should not make a big difference in real world since libvirt-daemon,
which is already required by libvirt-lock-sanlock, requires
libvirt-client and thus libvirt-lock-sanlock gets this dependency
transitively. However, since libvirt-lock-sanlock contains
sanlock_helper binary linked to libvirt.so, we should start requiring
libvirt-client directly.
Hypervisors are starting to support HyperV Enlightenment features that
improve behavior of guests running Microsoft Windows operating systems.
This patch adds support for the "relaxed" feature that improves timer
behavior and also establishes a framework to add these features in
future.
Currently we query-spice after the main migration has completed
before moving to next state. Qemu reports this as boolean (not
enclosed within quotes). Therefore it is not correct to use
virJSONValueObjectGetString but virJSONValueObjectGetBoolean instead.
The machine in the last output line of <qemu-binary> -M ?
was always reported as default machine even if this wasn't the
actual default. Trivial fix.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
According to our recent changes (clarifications), we should be pinning
qemu's emulator processes using the <vcpu> 'cpuset' attribute in case
there is no <emulatorpin> specified. This however doesn't work
entirely as expected and this patch should resolve all the remaining
issues.
When p2p migration fails early because qemuMigrationIsAllowed or
qemuMigrationIsSafe say migration should be cancelled, we fail to clear
the migration-out async job. As a result of that, further APIs called
for the same domain may fail with Timed out during operation: cannot
acquire state change lock.
Reported by Guido Winkelmann.
Added support for retrieving the XML defining a specific interface via
the udev based backend to virInterface. Implement the following APIs
for the udev based backend:
* virInterfaceGetXMLDesc()
Note: Does not support bond devices.
There are some descriptions not right in PowerPC CPU model driver.
This patch is to fix them.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Currently, the CPU model driver is not implemented for PowerPC.
Host's CPU information is needed to exposed to guests' XML file some
time.
This patch is to implement the callback functions of CPU model driver.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
CPU version can be got by PVR on PowerPC. So this PVR is defined in
the CPU data in cpuData structure.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It should relabel tapfd of virtual network of type VIR_DOMAIN_NET_TYPE_DIRECT
rather than VIR_DOMAIN_NET_TYPE_NETWORK and VIR_DOMAIN_NET_TYPE_BRIDGE
(commit ae368ebfcc introduced this bug)
Caution: The context of the two hunks is identical other than indentation.
Please be extremely cautious of where the patch gets applied.
On F17 at least, this command fails:
$ sudo /usr/sbin/lvcreate --name sparsetest -L 0K --virtualsize 16384K vgvirt
Unable to create new logical volume with no extents
Which is unfortunate since allocation=0 is what virt-manager tries to use
by default.
Rather than telling the user 'don't do that', let's just give them the
smallest allocation possible if alloc=0 is requested.
https://bugzilla.redhat.com/show_bug.cgi?id=866481
The previous commit was incomplete. We need to also add explicit
Requires for the newer version since RPM's automatic dependencies won't
work with sanlock.
libssh2 unfortunately doesn't support symbol versioning so RPM can't
figure out what version is needed for the currently installed libvirt
package. This patch adds a runtime requirement, so that the correct
version of libssh2 can be installed along with libvirt.
libvirt started using sanlock_killpath to implement on_lockfailure
action. Since sanlock_killpath was introduced in sanlock 2.4, libvirt
fails to build with older sanlock.
Currently there is a restriction that multi-threaded applications
must manually call virInitialize, before threads start using
libvirt, because it is not thread-safe. By switching it to use
a virOnceControl initializer we gain thread safety, and thus
applications no longer need to manually call it. They can rely
on virConnectOpen invoking it for them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Win32 platforms don't have SIGKILL defined, but they do have
SIGABRT. Since our virProcess wrapper treats anything which
isn't SIGTERM/SIGINT as equivalent to SIGKILL, just use
SIGABRT on Win32.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add two new APIs virNetServerNewPostExecRestart and
virNetServerPreExecRestart which allow a virNetServerPtr
object to be created from a JSON object and saved to a
JSON object, for the purpose of re-exec'ing a process.
This includes serialization of all registered services
and clients
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add two new APIs virNetServerClientNewPostExecRestart and
virNetServerClientPreExecRestart which allow a virNetServerClientPtr
object to be created from a JSON object and saved to a
JSON object, for the purpose of re-exec'ing a process.
This includes serialization of the connected socket associated
with the client
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add two new APIs virNetServerServiceNewPostExecRestart and
virNetServerServicePreExecRestart which allow a virNetServerServicePtr
object to be created from a JSON object and saved to a
JSON object, for the purpose of re-exec'ing a process.
This includes serialization of the listening sockets associated
with the service
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add two new APIs virNetSocketNewPostExecRestart and
virNetSocketPreExecRestart which allow a virNetSocketPtr
object to be created from a JSON object and saved to a
JSON object, for the purpose of re-exec'ing a process.
As well as saving the state in JSON format, the second
method will disable the O_CLOEXEC flag so that the open
file descriptors are preserved across the process re-exec()
Since it is not possible to serialize SASL or TLS encryption
state, an error will be raised if attempting to perform
serialization on non-raw sockets
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add two new APIs virLockSpaceNewPostExecRestart and
virLockSpacePreExecRestart which allow a virLockSpacePtr
object to be created from a JSON object and saved to a
JSON object, for the purposes of re-exec'ing a process.
As well as saving the state in JSON format, the second
method will disable the O_CLOEXEC flag so that the open
file descriptors are preserved across the process re-exec()
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The previously introduced virFile{Lock,Unlock} APIs provide a
way to acquire/release fcntl() locks on individual files. For
unknown reason though, the POSIX spec says that fcntl() locks
are released when *any* file handle referring to the same path
is closed. In the following sequence
threadA: fd1 = open("foo")
threadB: fd2 = open("foo")
threadA: virFileLock(fd1)
threadB: virFileLock(fd2)
threadB: close(fd2)
you'd expect threadA to come out holding a lock on 'foo', and
indeed it does hold a lock for a very short time. Unfortunately
when threadB does close(fd2) this releases the lock associated
with fd1. For the current libvirt use case for virFileLock -
pidfiles - this doesn't matter since the lock is acquired
at startup while single threaded an never released until
exit.
To provide a more generally useful API though, it is necessary
to introduce a slightly higher level abstraction, which is to
be referred to as a "lockspace". This is to be provided by
a virLockSpacePtr object in src/util/virlockspace.{c,h}. The
core idea is that the lockspace keeps track of what files are
already open+locked. This means that when a 2nd thread comes
along and tries to acquire a lock, it doesn't end up opening
and closing a new FD. The lockspace just checks the current
list of held locks and immediately returns VIR_ERR_RESOURCE_BUSY.
NB, the API as it stands is designed on the basis that the
files being locked are not being otherwise opened and used
by the application code. One approach to using this API is to
acquire locks based on a hash of the filepath.
eg to lock /var/lib/libvirt/images/foo.img the application
might do
virLockSpacePtr lockspace = virLockSpaceNew("/var/lib/libvirt/imagelocks");
lockname = md5sum("/var/lib/libvirt/images/foo.img");
virLockSpaceAcquireLock(lockspace, lockname);
NB, in this example, the caller should ensure that the path
is canonicalized before calculating the checksum.
It is also possible to do locks directly on resources by
using a NULL lockspace directory and then using the file
path as the lock name eg
virLockSpacePtr lockspace = virLockSpaceNew(NULL);
virLockSpaceAcquireLock(lockspace, "/var/lib/libvirt/images/foo.img");
This is only safe to do though if no other part of the process
will be opening the files. This will be the case when this
code is used inside the soon-to-be-reposted virlockd daemon
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Given Daniel's announcement[1], code targetting the next release will
be in 1.0.0, not 0.10.3. Changed mechanically with:
for f in $(git grep -l '0\(.\)10\13\b') ; do
sed -i -e 's/0\(.\)10\13/1\10\10/g' $f
done
[1]https://www.redhat.com/archives/libvir-list/2012-October/msg00403.html
* docs/formatdomain.html.in: Use 1.0.0 for next release.
* src/interface/interface_backend_udev.c: Likewise.
