If you have a qemu build that lacks the blockio tune monitor command,
then this command:
$ virsh blkdeviotune rhel6u2 hda --total_bytes_sec 1000
error: Unable to change block I/O throttle
error: internal error Unexpected error
fails as expected (well, the error message is lousy), but the next
dumpxml shows that the domain was modified anyway. Worse, that means
if you save the domain then restore it, the restore will likely fail
due to throttling being unsupported, even though no throttling should
even be active because the monitor command failed in the first place.
* src/qemu/qemu_driver.c (qemuDomainSetBlockIoTune): Check for
error before making modification permanent.
(cherry picked from commit 98cec05288)
These two functions are called from main() on all platforms, and
always return success on platforms that don't support libnl. They
still log an error message, though, which doesn't make sense - they
should just be NOPs on those platforms. (Per a suggestion during
review, I've turned the logs into debug messages rather than removing
them completely).
(cherry picked from commit bae4ff282b)
Error: STRING_NULL:
/libvirt/src/node_device/node_device_linux_sysfs.c:80:
string_null_argument: Function "saferead" does not terminate string "*buf".
/libvirt/src/util/util.c:101:
string_null_argument: Function "read" fills array "*buf" with a non-terminated string.
/libvirt/src/node_device/node_device_linux_sysfs.c:87:
string_null: Passing unterminated string "buf" to a function expecting a null-terminated string.
(cherry picked from commit 43d1616ff5)
Error: STRING_NULL:
/libvirt/src/util/uuid.c:273:
string_null_argument: Function "getDMISystemUUID" does not terminate string "*dmiuuid".
/libvirt/src/util/uuid.c:241:
string_null_argument: Function "saferead" fills array "*uuid" with a non-terminated string.
/libvirt/src/util/util.c:101:
string_null_argument: Function "read" fills array "*buf" with a non-terminated string.
/libvirt/src/util/uuid.c:274:
string_null: Passing unterminated string "dmiuuid" to a function expecting a null-terminated string.
/libvirt/src/util/uuid.c:138:
var_assign_parm: Assigning: "cur" = "uuidstr". They now point to the same thing.
/libvirt/src/util/uuid.c:164:
string_null_sink_loop: Searching for null termination in an unterminated array "cur".
(cherry picked from commit b4586051ec)
Error: RESOURCE_LEAK:
/libvirt/tests/qemuxml2argvtest.c:47:
alloc_arg: Calling allocation function "virAlloc" on "ret".
/libvirt/src/util/memory.c:101:
alloc_fn: Storage is returned from allocation function "calloc".
/libvirt/src/util/memory.c:101:
var_assign: Assigning: "*((void **)ptrptr)" = "calloc(1UL, size)".
/libvirt/tests/qemuxml2argvtest.c:54:
leaked_storage: Variable "ret" going out of scope leaks the storage it points to.
(cherry picked from commit a01e67217c)
Error: RESOURCE_LEAK:
/libvirt/src/qemu/qemu_driver.c:6968:
alloc_fn: Calling allocation function "calloc".
/libvirt/src/qemu/qemu_driver.c:6968:
var_assign: Assigning: "nodeset" = storage returned from "calloc(1UL, 1UL)".
/libvirt/src/qemu/qemu_driver.c:6977:
noescape: Variable "nodeset" is not freed or pointed-to in function "virTypedParameterAssign".
/libvirt/src/qemu/qemu_driver.c:6997:
leaked_storage: Variable "nodeset" going out of scope leaks the storage it points to.
(cherry picked from commit c0774482ff)
Error: RESOURCE_LEAK:
/libvirt/src/vmx/vmx.c:2431:
alloc_fn: Calling allocation function "calloc".
/libvirt/src/vmx/vmx.c:2431:
var_assign: Assigning: "networkName" = storage returned from "calloc(1UL, 1UL)".
/libvirt/src/vmx/vmx.c:2495:
leaked_storage: Variable "networkName" going out of scope leaks the storage it points to.
(cherry picked from commit 409a637eb1)
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/nodeinfo.c:629: alloc_fn: Calling allocation function "fopen".
/builddir/build/BUILD/libvirt-0.9.10/src/nodeinfo.c:629: var_assign: Assigning: "cpuinfo" = storage returned from "fopen("/proc/cpuinfo", "r")".
/builddir/build/BUILD/libvirt-0.9.10/src/nodeinfo.c:638: leaked_storage: Variable "cpuinfo" going out of scope leaks the storage it points to.
(cherry picked from commit 739cfc3161)
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/test/test_driver.c:1041: alloc_arg: Calling allocation function "virXPathNodeSet" on "devs".
/builddir/build/BUILD/libvirt-0.9.10/src/util/xml.c:621: alloc_arg: "virAllocN" allocates memory that is stored into "*list".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:129: alloc_fn: Storage is returned from allocation function "calloc".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:129: var_assign: Assigning: "*((void **)ptrptr)" = "calloc(count, size)".
/builddir/build/BUILD/libvirt-0.9.10/src/util/xml.c:625: noescape: Variable "*list" is not freed or pointed-to in function "memcpy".
/builddir/build/BUILD/libvirt-0.9.10/src/test/test_driver.c:1098: leaked_storage: Variable "devs" going out of scope leaks the storage it points to.
(cherry picked from commit ad4d4ad036)
Coverity logs:
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_inotify.c:103: alloc_fn: Calling allocation function "xenDaemonLookupByUUID".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xend_internal.c:2534: alloc_fn: Storage is returned from allocation function "virGetDomain".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:191: alloc_arg: "virAlloc" allocates memory that is stored into "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: alloc_fn: Storage is returned from allocation function "calloc".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: var_assign: Assigning: "*((void **)ptrptr)" = "calloc(1UL, size)".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:210: return_alloc: Returning allocated memory "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xend_internal.c:2534: var_assign: Assigning: "ret" = "virGetDomain(conn, name, uuid)".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xend_internal.c:2541: return_alloc: Returning allocated memory "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_inotify.c:103: var_assign: Assigning: "dom" = storage returned from "xenDaemonLookupByUUID(conn, rawuuid)".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_inotify.c:126: leaked_storage: Variable "dom" going out of scope leaks the storage it points to.
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2742: alloc_fn: Calling allocation function "fopen".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2742: var_assign: Assigning: "cpuinfo" = storage returned from "fopen("/proc/cpuinfo", "r")".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2763: noescape: Variable "cpuinfo" is not freed or pointed-to in function "xenHypervisorMakeCapabilitiesInternal".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2574:45: noescape: "xenHypervisorMakeCapabilitiesInternal" does not free or save its pointer parameter "cpuinfo".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2768: leaked_storage: Variable "cpuinfo" going out of scope leaks the storage it points to.
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2752: alloc_fn: Calling allocation function "fopen".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2752: var_assign: Assigning: "capabilities" = storage returned from "fopen("/sys/hypervisor/properties/capabilities", "r")".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2763: noescape: Variable "capabilities" is not freed or pointed-to in function "xenHypervisorMakeCapabilitiesInternal".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2574:60: noescape: "xenHypervisorMakeCapabilitiesInternal" does not free or save its pointer parameter "capabilities".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2768: leaked_storage: Variable "capabilities" going out of scope leaks the storage it points to.
(cherry picked from commit e91e0ab604)
Coverity logs:
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:523: alloc_fn: Calling allocation function "fopen".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:523: var_assign: Assigning: "fd" = storage returned from "fopen(local_file, "rb")".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:540: noescape: Variable "fd" is not freed or pointed-to in function "fread".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:542: noescape: Variable "fd" is not freed or pointed-to in function "feof".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:575: leaked_storage: Variable "fd" going out of scope leaks the storage it points to.
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:585: leaked_storage: Variable "fd" going out of scope leaks the storage it points to.
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2088: alloc_fn: Calling allocation function "phypVolumeLookupByName".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2026: alloc_fn: Storage is returned from allocation function "virGetStorageVol".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:724: alloc_arg: "virAlloc" allocates memory that is stored into "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: alloc_fn: Storage is returned from allocation function "calloc".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: var_assign: Assigning: "*((void **)ptrptr)" = "calloc(1UL, size)".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:753: return_alloc: Returning allocated memory "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2026: var_assign: Assigning: "vol" = "virGetStorageVol(pool->conn, pool->name, volname, key)".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2030: return_alloc: Returning allocated memory "vol".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2088: leaked_storage: Failing to save storage allocated by "phypVolumeLookupByName(pool, voldef->name)" leaks it.
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2725: alloc_fn: Calling allocation function "phypGetStoragePoolLookUpByUUID".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2689: alloc_fn: Storage is returned from allocation function "virGetStoragePool".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:592: alloc_arg: "virAlloc" allocates memory that is stored into "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: alloc_fn: Storage is returned from allocation function "calloc".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: var_assign: Assigning: "*((void **)ptrptr)" = "calloc(1UL, size)".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:610: return_alloc: Returning allocated memory "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2689: var_assign: Assigning: "sp" = "virGetStoragePool(conn, pools[i], uuid)".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2694: return_alloc: Returning allocated memory "sp".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2725: leaked_storage: Failing to save storage allocated by "phypGetStoragePoolLookUpByUUID(conn, def->uuid)" leaks it.
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2719: alloc_fn: Calling allocation function "phypStoragePoolLookupByName".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2254: alloc_fn: Storage is returned from allocation function "virGetStoragePool".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:592: alloc_arg: "virAlloc" allocates memory that is stored into "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: alloc_fn: Storage is returned from allocation function "calloc".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: var_assign: Assigning: "*((void **)ptrptr)" = "calloc(1UL, size)".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:610: return_alloc: Returning allocated memory "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2254: return_alloc_fn: Directly returning storage allocated by "virGetStoragePool".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2719: leaked_storage: Failing to save storage allocated by "phypStoragePoolLookupByName(conn, def->name)" leaks it.
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2270: alloc_fn: Calling allocation function "phypStoragePoolLookupByName".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2254: alloc_fn: Storage is returned from allocation function "virGetStoragePool".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:592: alloc_arg: "virAlloc" allocates memory that is stored into "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: alloc_fn: Storage is returned from allocation function "calloc".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: var_assign: Assigning: "*((void **)ptrptr)" = "calloc(1UL, size)".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:610: return_alloc: Returning allocated memory "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2254: return_alloc_fn: Directly returning storage allocated by "virGetStoragePool".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2270: var_assign: Assigning: "sp" = storage returned from "phypStoragePoolLookupByName(vol->conn, vol->pool)".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2324: leaked_storage: Variable "sp" going out of scope leaks the storage it points to.
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2327: leaked_storage: Variable "sp" going out of scope leaks the storage it points t
(cherry picked from commit cff0d342ad)
Related coverity log:
Error: FORWARD_NULL:
/builddir/build/BUILD/libvirt-0.9.10/python/libvirt-override.c:355:
assign_zero: Assigning: "params" = 0.
/builddir/build/BUILD/libvirt-0.9.10/python/libvirt-override.c:458:
var_deref_model: Passing null variable "params" to function
"getPyVirTypedParameter", which dereferences it. (The dereference is assumed on
the basis of the 'nonnull' parameter attribute.)
(cherry picked from commit b80f4db993)
On cygwin, <rpc/rpc.h> lives in a different directory than
/usr/include, so anything that uses it must modify CFLAGS. This
previously tripped up just 'make check', but now that we build
all test programs unconditionally, it also trips up 'make'.
* tests/Makefile.am (virnetmessagetest_CFLAGS): Find rpc headers.
(cherry picked from commit c898263826)
qemuDomainNetsRestart indents with 3 spaces.
This patch is to correct it.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
(cherry picked from commit 0d631e9182)
https://bugzilla.redhat.com/show_bug.cgi?id=817244 mentions that
unlike most other tools, where --help or --version prevent all
further parsing of all later options, virsh was strange in that
--version stopped parsing but --help tried to plow on to the end.
There was no rationale for this original implementation (since
2005!), so I think we can safely conform to common usage patterns.
* tools/virsh.c (main): Drop useless 'help' variable.
(cherry picked from commit 46e5d36b89)
The ATTRIBUTE_NONNULL(m) macro normally resolves to the gcc builtin
__attribute__((__nonnull__(m))). The effect of this in gcc is
unfortunately only to make gcc believe that "m" can never possibly be
NULL, *not* to add in any checks to guarantee that it isn't ever NULL
(i.e. it is an optimization aid, *not* something to verify code
correctness.) - see the following gcc bug report for more details:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=17308
Static source analyzers such as clang and coverity apparently can use
ATTRIBUTE_NONNULL(), though, to detect dead code (in the case that the
arg really is guaranteed non-NULL), as well as situations where an
obviously NULL arg is given to the function.
https://bugzilla.redhat.com/show_bug.cgi?id=815270 is a good example
of a bug caused by erroneous application of ATTRIBUTE_NONNULL().
Several people spent a long time staring at this code and not finding
the problem, because the problem wasn't in the function itself, but in
the prototype that specified ATTRIBUTE_NONNULL() for an arg that
actually *wasn't* always non-NULL, and caused a segv when dereferenced
(even though the code that dereferenced the pointer was inside an if()
that checked for a NULL pointer, that code was optimized out by gcc).
There may be some very small gain to be had from the optimizations
that can be inferred from ATTRIBUTE_NONNULL(), but it seems safer to
err on the side of generating code that behaves as expected, while
turning on the attribute for static analyzers.
(cherry picked from commit eefb881d46)
Once lxcContainerSetStdio is invoked, logging will not work as
expected in libvirt_lxc. So make sure this is the last thing to
be called, in particular after setting the security process label
(cherry picked from commit 07cf96ecc7)
The virLogSetFromEnv call was done too late in startup to
catch many log messages (eg from security driver initialization).
To assist debugging also explicitly log the security details
at startup
(cherry picked from commit 43ee987312)
The driver->securityDriverName field may be NULL, if automatic
probing is used to determine security driver. This meant that
unless selinux was explicitly requested in lxc.conf, it was
not being sent to the libvirt_lxc process.
The driver->securityManager field is guaranteed non-NULL, since
there will always be the 'none' security driver present if
nothing else exists. So use that to set the driver name for
libvirt_lxc
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 3746b070e7)
Currently the libvirt_lxc process uses VIR_DOMAIN_XML_INACTIVE
when loading the XML for the container. This means it loses
any dynamic data such as the, just allocated, SELinux label.
Further there is an inconsistency in the libvirt LXC driver
whereby it saves the live config XML and then later overwrites
the file with the live status XML instead. Add a comment about
this for future reference.
* src/lxc/lxc_controller.c: Remove VIR_DOMAIN_XML_INACTIVE
when loading XML
* src/lxc/lxc_driver.c: Add comment about inconsistent
config file formats
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit eb06375a84)
Otherwise, a string such as _("Don't use \"" VAR "\".") would
complain about unmarked diagnostics.
* cfg.mk (sc_libvirt_unmarked_diagnostics): Handle \" in message.
(cherry picked from commit 8f3728f853)
This works with newer qemu that doesn't allow escaping spaces.
It's backwards compatible as well.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
(cherry picked from commit d50cae3335)
In fact, the 'tapfd' is always NULL, the function 'virNetDevTapCreate()' hasn't
assign 'fd' to 'tapfd', when the function 'virNetDevSetMAC()' is failed then
goto 'error' label, finally, the VIR_FORCE_CLOSE() will deref a NULL 'tapfd'.
* util/virnetdevtap.c (virNetDevTapCreateInBridgePort): fix a NULL pointer derefing.
* How to reproduce?
$ cat > /tmp/net.xml <<EOF
<network>
<name>test</name>
<forward mode='nat'/>
<bridge name='br1' stp='off' delay='1' />
<mac address='00:00:00:00:00:00'/>
<ip address='192.168.100.1' netmask='255.255.255.0'>
<dhcp>
<range start='192.168.100.2' end='192.168.100.254' />
</dhcp>
</ip>
</network>
EOF
$ virsh net-define /tmp/net.xml
$ virsh net-start test
error: Failed to start network brTest
error: End of file while reading data: Input/output error
Signed-off-by: Alex Jia <ajia@redhat.com>
(cherry picked from commit 5ee18aaa57)
It doesn't break out the "for" loop even if duplicate pool is
found, and thus the "matchpool" could be overriden as NULL again
if there is different pool afterwards.
To address the problem in libvirt-user list:
https://www.redhat.com/archives/libvirt-users/2012-April/msg00150.html
(cherry picked from commit 980f12be72)
When libvirtd is started, we create "libvirt/qemu" directories under
hugetlbfs mount point. Only the "qemu" subdirectory is chowned to qemu
user and "libvirt" remains owned by root. If umask was too restrictive
when libvirtd started, qemu user may lose access to "qemu"
subdirectory. Let's explicitly grant search permissions to "libvirt"
directory for all users.
(cherry picked from commit 9d2ac5453e)
Currently, qemu GA is not providing 'desc' field for errors like
we are used to from qemu monitor. Therefore, we fall back to this
general 'unknown error' string. However, GA is reporting 'class' which
is not perfect, but much more helpful than generic error string.
Thus we should fall back to class firstly and if even no class
is presented, then we can fall back to that generic string.
Before this patch:
virsh # dompmsuspend --target mem f16
error: Domain f16 could not be suspended
error: internal error unable to execute QEMU command
'guest-suspend-ram': unknown QEMU command error
After this patch:
virsh # dompmsuspend --target mem f16
error: Domain f16 could not be suspended
error: internal error unable to execute QEMU command
'guest-suspend-ram': The command has not been found
(cherry picked from commit 378031088f)
More bug extermination in the category of:
Error: CHECKED_RETURN:
/libvirt/src/conf/network_conf.c:595:
check_return: Calling function "virAsprintf" without checking return value (as is done elsewhere 515 out of 543 times).
/libvirt/src/qemu/qemu_process.c:2780:
unchecked_value: No check of the return value of "virAsprintf(&msg, "was paused (%s)", virDomainPausedReasonTypeToString(reason))".
/libvirt/tests/commandtest.c:809:
check_return: Calling function "setsid" without checking return value (as is done elsewhere 4 out of 5 times).
/libvirt/tests/commandtest.c:830:
unchecked_value: No check of the return value of "virTestGetDebug()".
/libvirt/tests/commandtest.c:831:
check_return: Calling function "virTestGetVerbose" without checking return value (as is done elsewhere 41 out of 42 times).
/libvirt/tests/commandtest.c:833:
check_return: Calling function "virInitialize" without checking return value (as is done elsewhere 18 out of 21 times).
One note about the error in commandtest line 809: setsid() seems to fail when running the test -- could be removed ?
(cherry picked from commit 59b935f5ae)
Error: UNINIT:
/libvirt/src/lxc/lxc_driver.c:1412:
var_decl: Declaring variable "fd" without initializer.
/libvirt/src/lxc/lxc_driver.c:1460:
uninit_use_in_call: Using uninitialized value "fd" when calling "virFileClose".
/libvirt/src/util/virfile.c:50:
read_parm: Reading a parameter value.
Error: DEADCODE:
/libvirt/src/lxc/lxc_controller.c:960:
dead_error_condition: On this path, the condition "ret == 4" cannot be true.
/libvirt/src/lxc/lxc_controller.c:959:
at_most: After this line, the value of "ret" is at most -1.
/libvirt/src/lxc/lxc_controller.c:959:
new_values: Noticing condition "ret < 0".
/libvirt/src/lxc/lxc_controller.c:961:
dead_error_line: Execution cannot reach this statement "continue;".
Error: UNINIT:
/libvirt/src/lxc/lxc_controller.c:1104:
var_decl: Declaring variable "consoles" without initializer.
/libvirt/src/lxc/lxc_controller.c:1237:
uninit_use: Using uninitialized value "consoles".
(cherry picked from commit f74471de4f)
Ever since commit c964b6a, make was trying to find the timestamp
of '""./apibuild.py".stamp"', but only touching 'apibuild.py.stamp',
and thus always rebuilding. Reported by Daniel P. Berrange.
* docs/Makefile.am (APIBUILD, APIBUILD_STAMP): Omit bogus quotes.
(cherry picked from commit c0057d9a49)
This reverts commit 372a14c673.
We shoul not have cherry-picked 28ae4ff0 without also cherry-picking
2223ea98, but the latter is too complex for a stable branch.
We were using the libvirt release version (like 0.9.11) and not
the configure version (which for stable releases is 0.9.11.X)
Most other places got this right so hopefully that's all the fallout
from the version format change :)
Signed-off-by: Cole Robinson <crobinso@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=816662 pointed out
that attempting 'virsh blockpull' on an offline domain gave a
misleading error message about qemu lacking support for the
operation, even when qemu was specifically updated to support it.
The real problem is that we have several capabilities that are
only determined when starting a domain, and therefore are still
clear when first working with an inactive domain (namely, any
capability set by qemuMonitorJSONCheckCommands).
While this patch was able to hoist an existing check in one of the
three culprits, it had to add redundant checks in the other two
places (because you always have to check for an active domain after
obtaining a VM job lock, but the capability bits were being checked
prior to obtaining the job lock).
Someday it would be nice to patch libvirt to cache the set of
capabilities per qemu binary (as determined by inode and timestamp),
rather than re-probing the binary every time a domain is started,
and to teach the cache how to query the monitor during the one
time the probe is made rather than having to wait until a guest
is started; then, a capability probe would succeed even for offline
guests because it just refers to the cache, and the single check for
an active domain after grabbing the job lock would be sufficient.
But since that will involve a lot more coding, I'm happy to go
with this simpler solution for an immediate solution.
* src/qemu/qemu_driver.c (qemuDomainPMSuspendForDuration)
(qemuDomainSnapshotCreateXML, qemuDomainBlockJobImpl): Check for
offline state before checking an online-only cap.
Conflicts:
src/qemu/qemu_driver.c
This patch addresses the following coverity findings:
/libvirt/src/conf/nwfilter_params.c:390:
var_assigned: Assigning: "varValue" = null return value from "virHashLookup".
/libvirt/src/conf/nwfilter_params.c:392:
dereference: Dereferencing a pointer that might be null "varValue" when calling "virNWFilterVarValueGetNthValue".
/libvirt/src/conf/nwfilter_params.c:399:
dereference: Dereferencing a pointer that might be null "tmp" when calling "virNWFilterVarValueGetNthValue".
This patch addresses the following coverity findings:
/libvirt/src/conf/nwfilter_params.c:157:
deref_parm: Directly dereferencing parameter "val".
/libvirt/src/conf/nwfilter_params.c:473:
negative_returns: Using variable "iterIndex" as an index to array "res->iter".
/libvirt/src/nwfilter/nwfilter_ebiptables_driver.c:2891:
unchecked_value: No check of the return value of "virAsprintf(&protostr, "-d 01:80:c2:00:00:00 ")".
/libvirt/src/nwfilter/nwfilter_ebiptables_driver.c:2894:
unchecked_value: No check of the return value of "virAsprintf(&protostr, "-p 0x%04x ", l3_protocols[protoidx].attr)".
/libvirt/src/nwfilter/nwfilter_ebiptables_driver.c:3590:
var_deref_op: Dereferencing null variable "inst".
Some of the error messages in this function should have been
virReportSystemError (since they have an errno they want to log), but
were mistakenly written as netlinkError, which expects a libvirt error
code instead. The result was that when one of the errors was
encountered, "No error message provided" would be printed instead of
something meaningful (see
https://bugzilla.redhat.com/show_bug.cgi?id=816465 for an example).
Once qemu monitor reports migration has completed, we just closed our
end of the pipe and let migration tunnel die. This generated bogus error
in case we did so before the thread saw EOF on the pipe and migration
was aborted even though it was in fact successful.
With this patch we first wake up the tunnel thread and once it has read
all data from the pipe and finished the stream we close the
filedescriptor.
A small additional bonus of this patch is that real errors reported
inside qemuMigrationIOFunc are not overwritten by virStreamAbort any
more.
When QEMU reported failed or canceled migration, we correctly detected
it but didn't really consider it as an error condition and migration
protocol just went on. Luckily, some of the subsequent steps eventually
failed end we reported an (unrelated and mostly random) error back to
the caller.
Currently, non-blocking calls are either sent immediately or discarded
in case sending would block. This was implemented based on the
assumption that the non-blocking keepalive call is not needed as there
are other calls in the queue which would keep the connection alive.
However, if those calls are no-reply calls (such as those carrying
stream data), the remote party knows the connection is alive but since
we don't get any reply from it, we think the connection is dead.
This is most visible in tunnelled migration. If it happens to be longer
than keepalive timeout (30s by default), it may be unexpectedly aborted
because the connection is considered to be dead.
With this patch, we only discard non-blocking calls when the last call
with a thread is completed and thus there is no thread left to keep
sending the remaining non-blocking calls.
In some cases (spotted with broken connection during tunneled migration)
we were overwriting the original error with worse or even misleading
errors generated when we were cleaning up after failed migration.
This patch resolves https://bugzilla.redhat.com/show_bug.cgi?id=815270
The function virNetDevMacVLanVPortProfileRegisterCallback() takes an
arg "virtPortProfile", and was checking it for non-NULL before using
it. However, the prototype for
virNetDevMacVLanPortProfileRegisterCallback had marked that arg with
ATTRIBUTE_NONNULL(). Contrary to what one may think,
ATTRIBUTE_NONNULL() does not provide any guarantee that an arg marked
as such really is always non-null; the only effect to the code
generated by gcc, is that gcc *assumes* it is non-NULL; this results
in, for example, the check for a non-NULL value being optimized out.
(Unfortunately, this code removal only occurs when optimization is
enabled, and I am in the habit of doing local builds with optimization
off to ease debugging, so the bug didn't show up in my earlier local
testing).
In general, virPortProfile might always be NULL, so it shouldn't be
marked as ATTRIBUTE_NONNULL. One other function prototype made this
same error, so this patch fixes it as well.
Commit 8fe455fd36 tried to work around
a regression introduced in upstream gnulib that requires gettext 0.18
or newer on all projects using bootstrap, by making libvirt require
gettext 0.18. But this fails on RHEL 6.2, which still ships gettext
0.17. Revert that change, and instead, import the latest round of
gnulib updates that fix that problem properly.
If you have already built in the window where libvirt required 0.18,
be aware that incremental updates may run into problems: this is
because 'autopoint --force' will not downgrade m4/po.m4 back to an
older version, but it must be downgraded back to 0.17 levels to work
with this patch. You may either manually remove that file then rerun
bootstrap, or it may prove easier to just clean up all non-git files
to start from a clean slate.
* bootstrap.conf: Revert minimum gettext back to 0.17.
* configure.ac: Likewise.
* .gnulib: Update to latest, for bootstrap fixes.
* bootstrap: Resync from gnulib.
