If libvirt daemon gets restarted and there is (at least) one
unresponsive qemu, the startup procedure hangs up. This patch creates
one thread per vm in which we try to reconnect to monitor. Therefore,
blocking in one thread will not affect other APIs.
This patch creates an optional BeginJob queue size limit. When
active, all other attempts above level will fail. To set this
feature assign desired value to max_queued variable in qemu.conf.
Setting it to 0 turns it off.
This patch annotates APIs with low or high priority.
In low set MUST be all APIs which might eventually access monitor
(and thus block indefinitely). Other APIs may be marked as high
priority. However, some must be (e.g. domainDestroy).
For high priority calls (HPC), there are some high priority workers
(HPW) created in the pool. HPW can execute only HPC, although normal
worker can process any call regardless priority. Therefore, only those
APIs which are guaranteed to end in reasonable small amount of time
can be marked as HPC.
The size of this HPC pool is static, because HPC are expected to end
quickly, therefore jobs assigned to this pool will be served quickly.
It can be configured in libvirtd.conf via prio_workers variable.
Default is set to 5.
To mark API with low or high priority, append priority:{low|high} to
it's comment in src/remote/remote_protocol.x. This is similar to
autogen|skipgen. If not marked, the generator assumes low as default.
With this, it is now possible to create external snapshots even
when SELinux is enforcing, and to protect the new file with a
lock manager.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Create and register
new file with proper permissions and locks.
(qemuDomainSnapshotCreateDiskActive): Update caller.
Lots of earlier patches led up to this point - the qemu snapshot_blkdev
monitor command can now be controlled by libvirt! Well, insofar as
SELinux doesn't prevent qemu from open(O_CREAT) on the files. There's
still some followup work before things work with SELinux enforcing,
but this patch is big enough to post now.
There's still room for other improvements, too (for example, taking a
disk snapshot of an inactive domain, by using qemu-img for both internal
and external snapshots; wiring up delete and revert control, including
additional flags from my RFC; supporting active QED disk snapshots;
supporting per-storage-volume snapshots such as LVM or btrfs snapshots;
etc.). But this patch is the one that proves the new XML works!
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Wire in
active disk snapshots.
(qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotCreateDiskActive)
(qemuDomainSnapshotCreateSingleDiskActive): New functions.
No one uses this yet, but it will be important once
virDomainSnapshotCreateXML learns a VIR_DOMAIN_SNAPSHOT_DISK_ONLY
flag, and the xml allows passing in the new file names.
* src/qemu/qemu_monitor.h (qemuMonitorDiskSnapshot): New prototype.
* src/qemu/qemu_monitor_text.h (qemuMonitorTextDiskSnapshot):
Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskSnapshot):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorDiskSnapshot): New
function.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskSnapshot):
Likewise.
Snapshots alter the set of disk image files opened by qemu, so
they must be audited. But they don't involve a full disk definition
structure, just the new filename. Make the next patch easier by
refactoring the audit routines to just operate on file name.
* src/conf/domain_audit.h (virDomainAuditDisk): Update prototype.
* src/conf/domain_audit.c (virDomainAuditDisk): Act on strings,
not definition structures.
(virDomainAuditStart): Update caller.
* src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia)
(qemuDomainAttachPciDiskDevice, qemuDomainAttachSCSIDisk)
(qemuDomainAttachUsbMassstorageDevice)
(qemuDomainDetachPciDiskDevice, qemuDomainDetachDiskDevice):
Likewise.
My RFC for snapshot support [1] proposes several rules for when it is
safe to delete or revert to an external snapshot, predicated on
the existence of new API flags. These will be incrementally added
in future patches, but until then, blindly mishandling a disk
snapshot risks corrupting internal state, so it is better to
outright reject the attempts until the other pieces are in place,
thus incrementally relaxing the restrictions added in this patch.
[1] https://www.redhat.com/archives/libvir-list/2011-August/msg00361.html
* src/qemu/qemu_driver.c (qemuDomainSnapshotCountExternal): New
function.
(qemuDomainUndefineFlags, qemuDomainSnapshotDelete): Use it to add
safety valve.
(qemuDomainRevertToSnapshot, qemuDomainSnapshotCreateXML): Add safety
valve.
Prior to this patch, <domainsnapshot>/<disks> was ignored. This
changes it to be an error unless an explicit disk snapshot is
requested (a future patch may relax things if it turns out to
be useful to have a <disks> specification alongside a system
checkpoint).
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_DISK_ONLY): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Disk
snapshots not supported yet.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Likewise.
I got confused when 'virsh domblkinfo dom disk' required the
path to a disk (which can be ambiguous, since a single file
can back multiple disks), rather than the unambiguous target
device name that I was using in disk snapshots. So, in true
developer fashion, I went for the best of both worlds - all
interfaces that operate on a disk (aka block) now accept
either the target name or the unambiguous path to the backing
file used by the disk.
* src/conf/domain_conf.h (virDomainDiskIndexByName): Add
parameter.
(virDomainDiskPathByName): New prototype.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/conf/domain_conf.c (virDomainDiskIndexByName): Also allow
searching by path, and decide whether ambiguity is okay.
(virDomainDiskPathByName): New function.
(virDomainDiskRemoveByName, virDomainSnapshotAlignDisks): Update
callers.
* src/qemu/qemu_driver.c (qemudDomainBlockPeek)
(qemuDomainAttachDeviceConfig, qemuDomainUpdateDeviceConfig)
(qemuDomainGetBlockInfo, qemuDiskPathToAlias): Likewise.
* src/qemu/qemu_process.c (qemuProcessFindDomainDiskByPath):
Likewise.
* src/libxl/libxl_driver.c (libxlDomainAttachDeviceDiskLive)
(libxlDomainDetachDeviceDiskLive, libxlDomainAttachDeviceConfig)
(libxlDomainUpdateDeviceConfig): Likewise.
* src/uml/uml_driver.c (umlDomainBlockPeek): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainBlockPeek): Likewise.
* docs/formatsnapshot.html.in: Update documentation.
* tools/virsh.pod (domblkstat, domblkinfo): Likewise.
* docs/schemas/domaincommon.rng (diskTarget): Tighten pattern on
disk targets.
* docs/schemas/domainsnapshot.rng (disksnapshot): Update to match.
* tests/domainsnapshotxml2xmlin/disk_snapshot.xml: Update test.
Adds an optional element to <domainsnapshot>, which will be used
to give user control over external snapshot filenames on input,
and specify generated filenames on output.
For now, no driver accepts this element; that will come later.
<domainsnapshot>
...
<disks>
<disk name='vda' snapshot='no'/>
<disk name='vdb' snapshot='internal'/>
<disk name='vdc' snapshot='external'>
<driver type='qcow2'/>
<source file='/path/to/new'/>
</disk>
</disks>
<domain>
...
<devices>
<disk ...>
<driver name='qemu' type='raw'/>
<target dev='vdc'/>
<source file='/path/to/old'/>
</disk>
</devices>
</domain>
</domainsnapshot>
* src/conf/domain_conf.h (_virDomainSnapshotDiskDef): New type.
(_virDomainSnapshotDef): Add new elements.
(virDomainSnapshotAlignDisks): New prototype.
* src/conf/domain_conf.c (virDomainSnapshotDiskDefClear)
(virDomainSnapshotDiskDefParseXML, disksorter)
(virDomainSnapshotAlignDisks): New functions.
(virDomainSnapshotDefParseString): Parse new fields.
(virDomainSnapshotDefFree): Clean them up.
(virDomainSnapshotDefFormat): Output them.
* src/libvirt_private.syms (domain_conf.h): Export new function.
* docs/schemas/domainsnapshot.rng (domainsnapshot, disksnapshot):
Add more xml.
* docs/formatsnapshot.html.in: Document it.
* tests/domainsnapshotxml2xmlin/disk_snapshot.xml: New test.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: Update.
In order to distinguish disk snapshots from system checkpoints, a
new state value that is only valid for snapshots is helpful.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_LAST): New placeholder.
* src/conf/domain_conf.h (virDomainSnapshotState): New enum mapping.
(VIR_DOMAIN_DISK_SNAPSHOT): New internal enum value.
* src/conf/domain_conf.c (virDomainState): Use placeholder.
(virDomainSnapshotState): Extend mapping by one for use in snapshot.
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Handle new state.
(virDomainObjSetState, virDomainStateReasonToString)
(virDomainStateReasonFromString): Avoid compiler warnings.
* tools/virsh.c (vshDomainState, vshDomainStateReasonToString):
Likewise.
* src/libvirt_private.syms (domain_conf.h): Export new functions.
* docs/schemas/domainsnapshot.rng: Tighten state definition.
* docs/formatsnapshot.html.in: Document it.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: New test.
Since a snapshot is fully recoverable, it is useful to have a
snapshot as a means of hibernating a guest, then reverting to
the snapshot to wake the guest up. This mode of usage is
similar to 'virsh save/virsh restore', except that virsh
save uses an external file while virsh snapshot keeps the
vm state internal to a qcow2 file. However, it only works on
persistent domains.
In the usage pattern of snapshot/revert for hibernating a guest,
there is no need to keep the guest running between the two points
in time, especially since that would generate runtime state that
would just be discarded. Add a flag to make it possible to
stop the domain after the snapshot has completed.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_CREATE_HALT):
New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML)
(qemuDomainSnapshotCreateActive): Implement it.
Reverting to a state prior to an external snapshot risks
corrupting any other branches in the snapshot hierarchy that
were using the snapshot as a read-only backing file. So
disk snapshot code will default to preventing reverting to
a snapshot that has any children, meaning that deleting just
the children of a snapshot becomes a useful operation in
preparing that snapshot for being a future reversion target.
The code for the new flag is simple - it's one less deletion,
plus a tweak to keep the current snapshot correct.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN_ONLY): New flag.
* src/libvirt.c (virDomainSnapshotDelete): Document it, and
enforce mutual exclusion.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDelete): Implement
it.
The previous patch introduced new config, but if a hypervisor does
not support that new config, someone can write XML that does not
behave as documented. This prevents some of those cases by
explicitly rejecting transient disks for several hypervisors.
Disk snapshots will require a new flag to actually affect a snapshot
creation, so there's not much to reject there.
* src/qemu/qemu_command.c (qemuBuildDriveStr): Reject transient
disks for now.
* src/libxl/libxl_conf.c (libxlMakeDisk): Likewise.
* src/xenxs/xen_sxpr.c (xenFormatSxprDisk): Likewise.
* src/xenxs/xen_xm.c (xenFormatXMDisk): Likewise.
As discussed here:
https://www.redhat.com/archives/libvir-list/2011-August/msg00361.htmlhttps://www.redhat.com/archives/libvir-list/2011-August/msg00552.html
Adds snapshot attribute and transient sub-element:
<devices>
<disk type=... snapshot='no|internal|external'>
...
<transient/>
</disk>
</devices>
* docs/schemas/domaincommon.rng (snapshot): New define.
(disk): Add snapshot and persistent attributes.
* docs/formatdomain.html.in: Document them.
* src/conf/domain_conf.h (virDomainDiskSnapshot): New enum.
(_virDomainDiskDef): New fields.
* tests/qemuxml2argvdata/qemuxml2argv-disk-transient.xml: New
test of rng, no args counterpart until qemu support is complete.
* tests/qemuxml2argvdata/qemuxml2argv-disk-snapshot.args: New
file, snapshot attribute does not affect args.
* tests/qemuxml2argvdata/qemuxml2argv-disk-snapshot.xml: Likewise.
* tests/qemuxml2argvtest.c (mymain): Run new test.
Fix bug #611823 storage driver should prohibit pools with duplicate
underlying storage.
Add internal API virStoragePoolSourceFindDuplicate() to do uniqueness
check based on source location infomation for pool type.
* AUTHORS: add Lei Li
At least Xen-3.4.3 translates the /vm/localtime SXPR value to
/domain/platform/localtime and /domain/image/{linux,hvm}/localtime when
the domain is defined. When reading back that information libvirt only
handles HVM domains, but not PV domains: This results in libvirtd always
returning
<clock offset="utc"/>
while Xend used (localtime 1).
For PV domains use /domain/image/linux/localtime.
When reverting to a snapshot, the inactive domain configuration
has to be rolled back to what it was at the time of the snapshot.
Additionally, if the VM is active and the snapshot was active,
this now adds a failure if the two configurations are ABI
incompatible, rather than risking qemu confusion.
A future patch will add a VIR_DOMAIN_SNAPSHOT_FORCE flag, which
will be required for two risky code paths - reverting to an
older snapshot that lacked full domain information, and reverting
from running to a live snapshot that requires starting a new qemu
process. Any reverting that stops a running vm is also a form
of data loss (discarding the current running state to go back in
time), but as that is what reversion usually implies, it is
probably not worth requiring a force flag.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Copy out
domain.
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot): Perform
ABI compatibility checks.
Commit 69278878 fixed one direction of arbitrarily-named snapshots,
but not the round trip path. While auditing domain_conf, I found
a couple other instances that weren't escaping arbitrary strings.
* src/conf/domain_conf.c (virDomainFSDefFormat)
(virDomainGraphicsListenDefFormat, virDomainSnapshotDefFormat):
Escape arbitrary strings.
Just like VM saved state images (virsh save), snapshots MUST
track the inactive domain xml to detect any ABI incompatibilities.
The indentation is not perfect, but functionality comes before form.
Later patches will actually supply a full domain; for now, this
wires up the storage to support one, but doesn't ever generate one
in dumpxml output.
Happily, libvirt.c was already rejecting use of VIR_DOMAIN_XML_SECURE
from read-only connections, even though before this patch, there was
no information to be secured by the use of that flag.
And while we're at it, mark the libvirt snapshot metadata files
as internal-use only.
* src/libvirt.c (virDomainSnapshotGetXMLDesc): Document flag.
* src/conf/domain_conf.h (_virDomainSnapshotDef): Add member.
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Update signature.
* src/conf/domain_conf.c (virDomainSnapshotDefFree): Clean up.
(virDomainSnapshotDefParseString): Optionally parse domain.
(virDomainSnapshotDefFormat): Output full domain.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML)
(esxDomainSnapshotGetXMLDesc): Update callers.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML)
(vboxDomainSnapshotGetXMLDesc): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML)
(qemuDomainSnapshotLoad, qemuDomainSnapshotGetXMLDesc)
(qemuDomainSnapshotWriteMetadata): Likewise.
* docs/formatsnapshot.html.in: Rework doc example.
Based on a patch by Philipp Hahn.
Minor semantic change - allow domain xml to be generated in place
within a larger buffer, rather than having to go through a
temporary string.
* src/conf/domain_conf.c (virDomainDefFormatInternal): Add
parameter.
(virDomainDefFormat, virDomainObjFormat): Update callers.
Migration is another case of stranding metadata. And since
snapshot metadata is arbitrarily large, there's no way to
shoehorn it into the migration cookie of migration v3.
This patch consolidates two existing locations for migration
validation into one helper function, then enhances that function
to also do the new checks. If we could always trust the source
to validate migration, then the destination would not have to
do anything; but since older servers that did not do checking
can migrate to newer destinations, we have to repeat some of
the same checks on the destination; meanwhile, we want to
detect failures as soon as possible. With migration v2, this
means that validation will reject things at Prepare on the
destination if the XML exposes the problem, otherwise at Perform
on the source; with migration v3, this means that validation
will reject things at Begin on the source, or if the source
is old and the XML exposes the problem, then at Prepare on the
destination.
This patch is necessarily over-strict. Once a later patch
properly handles auto-cleanup of snapshot metadata on the
death of a transient domain, then the only time we actually
need snapshots to prevent migration is when using the
--undefinesource flag on a persistent source domain.
It is possible to recreate snapshot metadata on the destination
with VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE and
VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT. But for now, that is limited,
since if we delete the snapshot metadata prior to migration,
then we won't know the name of the current snapshot to pass
along; and if we delete the snapshot metadata after migration
and use the v3 migration cookie to pass along the name of the
current snapshot, then we need a way to bypass the fact that
this patch refuses migration with snapshot metadata present.
So eventually, we may have to introduce migration protocol v4
that allows feature negotiation and an arbitrary number of
handshake exchanges, so as to pass as many rpc calls as needed
to transfer all the snapshot xml hierarchy.
But all of that is thoughts for the future; for now, the best
course of action is to quit early, rather than get into a
funky state of stale metadata; then relax restrictions later.
* src/qemu/qemu_migration.h (qemuMigrationIsAllowed): Make static.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Alter
signature, and allow checks for both outgoing and incoming.
(qemuMigrationBegin, qemuMigrationPrepareAny)
(qemuMigrationPerformJob): Update callers.
A nice benefit of deleting all snapshots at undefine time is that
you don't have to do any reparenting or subtree identification - since
everything goes, this is an O(n) process, whereas using multiple
virDomainSnapshotDelete calls would be O(n^2) or worse. But it is
only doable for snapshot metadata, where we are in control of the
data being deleted; for the actual snapshots, there's too much
likelihood of something going wrong, and requiring even more API
calls to figure out what failed in the meantime, so callers are
better off deleting the snapshot data themselves one snapshot at
a time where they can deal with failures as they happen.
* src/qemu/qemu_driver.c (qemuDomainUndefineFlags): Honor new flags.
As more clients start to want to know this information, doing
a PATH stat walk and malloc for every client adds up.
We are only caching the location, not the capabilities, so even
if qemu-img is updated in the meantime, it will still probably
live in the same location. So there is no need to worry about
clearing this particular cache.
* src/qemu/qemu_conf.h (qemud_driver): Add member.
* src/qemu/qemu_driver.c (qemudShutdown): Cleanup.
(qemuFindQemuImgBinary): Add an argument, and cache result.
(qemuDomainSnapshotForEachQcow2, qemuDomainSnapshotDiscard)
(qemuDomainSnapshotCreateInactive, qemuDomainSnapshotRevertInactive)
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot): Update
callers.
Just as leaving managed save metadata behind can cause problems
when creating a new domain that happens to collide with the name
of the just-deleted domain, the same is true of leaving any
snapshot metadata behind. For safety sake, extend the semantic
change of commit b26a9fa9 to also cover snapshot metadata as a
reason to reject undefining an inactive domain. A future patch
will make sure that shutdown of a transient domain automatically
deletes snapshot metadata (whether by destroy, shutdown, or
guest-initiated action). Management apps of transient domains
should take care to capture xml of snapshots, if it is necessary
to recreate the snapshot metadata on a later transient domain
with the same name and uuid.
This also documents a new flag that hypervisors can choose to
support as a shortcut for taking care of the metadata as part of
the undefine process; however, nontrivial driver support for these
flags will be deferred to future patches.
Note that ESX and VBox can never be transient; therefore, they
do not have to worry about automatic cleanup after shutdown
(the persistent domain still remains); likewise they never
store snapshot metadata, so the undefine flag is trivial.
The nontrivial work remaining is thus in the qemu driver.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_UNDEFINE_SNAPSHOTS_METADATA): New flag.
* src/libvirt.c (virDomainUndefine, virDomainUndefineFlags):
Document new limitations and flag.
* src/esx/esx_driver.c (esxDomainUndefineFlags): Trivial
implementation.
* src/vbox/vbox_tmpl.c (vboxDomainUndefineFlags): Likewise.
* src/qemu/qemu_driver.c (qemuDomainUndefineFlags): Enforce
the limitations.
Redefining a qemu snapshot requires a bit of a tweak to the common
snapshot parsing code, but the end result is quite nice.
Be careful that redefinitions do not introduce circular parent
chains. Also, we don't want to allow conversion between online
and offline existing snapshots. We could probably do some more
validation for snapshots that don't already exist to make sure
they are even feasible, by parsing qemu-img output, but that
can come later.
* src/conf/domain_conf.h (virDomainSnapshotParseFlags): New
internal flags.
* src/conf/domain_conf.c (virDomainSnapshotDefParseString): Alter
signature to take internal flags.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Update caller.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Support
new public flags.
Supporting NO_METADATA on snapshot creation is interesting - we must
still return a valid opaque snapshot object, but the user can't get
anything out of it (unless we add a virDomainSnapshotGetName()),
since it is no longer registered with the domain.
Also, virsh now tries to query for secure xml, in anticipation of
when we store <domain> xml inside <domainsnapshot>; for now, we
can trivially support it, since we have nothing secure.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Support
new flag.
(qemuDomainSnapshotGetXMLDesc): Trivially support VIR_DOMAIN_XML_SECURE.
The first two flags are essential for being able to replicate
snapshot hierarchies across multiple hosts, which will come in
handy for supervised migrations. It also allows a management app
to take a snapshot of a transient domain, save the metadata, stop
the domain, recreate a new transient domain by the same name,
redefine the snapshot, then revert to it.
This is not quite as convenient as leaving the metadata behind
after a domain is no longer around, but doing that has a few
problems: 1. the libvirt API can only delete snapshot metadata
if there is a valid domain handle to use to get to that snapshot
object - if stale data is left behind without a domain, there is
no way to request that the data be cleaned up. 2. creating a new
domain with the same name but different uuid than the older
domain where a snapshot existed cannot use the older snapshot
data; this risks confusing libvirt, and forbidding the stale
data is similar to the recent patch to forbid stale managed save.
The first two flags might be useful on hypervisors with no metadata,
but only for modifying the notion of the current snapshot;
however, I don't know how to do that for ESX or VBox.
The third flag is a convenience option, to combine a creation with
a delete metadata into one step. It is trivial for hypervisors
with no metadata.
The qemu changes will be involved enough to warrant a separate patch.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_REDEFINE)
(VIR_DOMAIN_SNAPSHOT_CREATE_CURRENT)
(VIR_DOMAIN_SNAPSHOT_CREATE_NO_METADATA): New flags.
* src/libvirt.c (virDomainSnapshotCreateXML): Document them, and
enforce mutual exclusion.
* src/esx/esx_driver.c (esxDomainSnapshotCreateXML): Trivial
implementation.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotCreateXML): Likewise.
* docs/formatsnapshot.html.in: Document re-creation.
To make it easier to know when undefine will fail because of existing
snapshot metadata, we need to know how many snapshots have metadata.
Also, it is handy to filter the list of snapshots to just those that
have no parents; document that flag now, but implement it in later patches.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_LIST_ROOTS)
(VIR_DOMAIN_SNAPSHOT_LIST_METADATA): New flags.
* src/libvirt.c (virDomainSnapshotNum)
(virDomainSnapshotListNames): Document them.
* src/esx/esx_driver.c (esxDomainSnapshotNum)
(esxDomainSnapshotListNames): Implement trivial flag.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotNum)
(vboxDomainSnapshotListNames): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotNum)
(qemuDomainSnapshotListNames): Likewise.
Adding this was trivial compared to the previous patch for fixing
qemu snapshot deletion in the first place.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiscard): Add
parameter.
(qemuDomainSnapshotDiscardDescendant, qemuDomainSnapshotDelete):
Update callers.
A future patch will make it impossible to remove a domain if it
would leave behind any libvirt-tracked metadata about snapshots,
since stale metadata interferes with a new domain by the same name.
But requiring snaphot contents to be deleted before removing a
domain is harsh; with qemu, qemu-img can still make use of the
contents after the libvirt domain is gone. Therefore, we need
an option to get rid of libvirt tracking information, but not
the actual contents. For hypervisors that do not track any
metadata in libvirt, the implementation is trivial; all remaining
hypervisors (really, just qemu) will be dealt with separately.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_DELETE_METADATA_ONLY): New flag.
* src/libvirt.c (virDomainSnapshotDelete): Document it.
* src/esx/esx_driver.c (esxDomainSnapshotDelete): Trivially
supported when there is no libvirt metadata.
* src/vbox/vbox_tmpl.c (vboxDomainSnapshotDelete): Likewise.
Similar to the last patch in isolating the filtering from the
client actions, so that clients don't have to reinvent the
filtering.
* src/conf/domain_conf.h (virDomainSnapshotForEachChild): New
prototype.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/conf/domain_conf.c (virDomainSnapshotActOnChild)
(virDomainSnapshotForEachChild): New functions.
(virDomainSnapshotCountChildren): Delete.
(virDomainSnapshotHasChildren): Simplify.
* src/qemu/qemu_driver.c (qemuDomainSnapshotReparentChildren)
(qemuDomainSnapshotDelete): Likewise.
Deleting a snapshot and all its descendants had problems with
tracking the current snapshot. The deletion does not necessarily
proceed in depth-first order, so a parent could be deleted
before a child, wreaking havoc on passing the notion of the
current snapshot to the parent. Furthermore, even if traversal
were depth-first, doing multiple file writes to pass current up
the chain one snapshot at a time is wasteful, comparing to a
single update to the current snapshot at the end of the algorithm.
* src/qemu/qemu_driver.c (snap_remove): Add field.
(qemuDomainSnapshotDiscard): Add parameter.
(qemuDomainSnapshotDiscardDescendant): Adjust accordingly.
(qemuDomainSnapshotDelete): Properly reset current.
This one's nasty. Ever since we fixed virHashForEach to prevent
nested hash iterations for safety reasons (commit fba550f6),
virDomainSnapshotDelete with VIR_DOMAIN_SNAPSHOT_DELETE_CHILDREN
has been broken for qemu: it deletes children, while leaving
grandchildren intact but pointing to a no-longer-present parent.
But even before then, the code would often appear to succeed to
clean up grandchildren, but risked memory corruption if you have
a large and deep hierarchy of snapshots.
For acting on just children, a single virHashForEach is sufficient.
But for acting on an entire subtree, it requires iteration; and
since we declared recursion as invalid, we have to switch to a
while loop. Doing this correctly requires quite a bit of overhaul,
so I added a new helper function to isolate the algorithm from the
actions, so that callers do not have to reinvent the iteration.
Note that this _still_ does not handle CHILDREN correctly if one
of the children is the current snapshot; that will be next.
* src/conf/domain_conf.h (_virDomainSnapshotDef): Add mark.
(virDomainSnapshotForEachDescendant): New prototype.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/conf/domain_conf.c (virDomainSnapshotMarkDescendant)
(virDomainSnapshotActOnDescendant)
(virDomainSnapshotForEachDescendant): New functions.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiscardChildren):
Replace...
(qemuDomainSnapshotDiscardDescenent): ...with callback that
doesn't nest hash traversal.
(qemuDomainSnapshotDelete): Use new function.
Each snapshot lookup was iterating over the entire hash table, O(n),
instead of honing in directly on the hash key, amortized O(1).
Besides, fixing this means that virDomainSnapshotFindByName can now
be used inside another virHashForeach iteration (without this patch,
attempts to lookup a snapshot by name during a hash iteration will
fail due to nested iteration).
* src/conf/domain_conf.c (virDomainSnapshotFindByName): Simplify.
(virDomainSnapshotObjListSearchName): Delete unused function.
For a system checkpoint of a running or paused domain, it's fairly
easy to honor new flags for altering which state to use after the
revert. For an inactive snapshot, the revert has to be done while
there is no qemu process, so do back-to-back transitions; this also
lets us revert to inactive snapshots even for transient domains.
* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Support new
flags.
Commit 5e47785 broke reverts to offline system checkpoint snapshots
with older qemu, since there is no longer any code path to use
qemu -loadvm on next boot. Meanwhile, reverts to offline system
checkpoints have been broken for newer qemu, both before and
after that commit, since -loadvm no longer works to revert to
disk state without accompanying vm state. Fix both of these by
using qemu-img to revert disk state.
Meanwhile, consolidate the (now 3) clients of a qemu-img iteration
over all disks of a VM into one function, so that any future
algorithmic fixes to the FIXMEs in that function after partial
loop iterations are dealt with at once. That does mean that this
patch doesn't handle partial reverts very well, but we're not
making the situation any worse in this patch.
* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Use
qemu-img rather than 'qemu -loadvm' to revert to offline snapshot.
(qemuDomainSnapshotRevertInactive): New helper.
(qemuDomainSnapshotCreateInactive): Factor guts...
(qemuDomainSnapshotForEachQcow2): ...into new helper.
(qemuDomainSnapshotDiscard): Use it.
If you take a checkpoint snapshot of a running domain, then pause
qemu, then restore the snapshot, the result should be a running
domain, but the code was leaving things paused. Furthermore, if
you take a checkpoint of a paused domain, then run, then restore,
there was a brief but non-deterministic window of time where the
domain was running rather than paused. Fix both of these
discrepancies by always pausing before restoring.
Also, check that the VM is active every time lock is dropped
between two monitor calls.
Finally, straighten out the events that get emitted on each
transition.
* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Always
pause before reversion, and improve events.
Implement the new running/paused overrides for saved state management.
Unfortunately, for virDomainSaveImageDefineXML, the saved state
updates are write-only - I don't know of any way to expose a way
to query the current run/pause setting of an existing save image
file to the user without adding a new API or modifying the domain
xml of virDomainSaveImageGetXMLDesc to include a new element to
reflect the state bit encoded into the save image. However, I
don't think this is a show-stopper, since the API is designed to
leave the state bit alone unless an explicit flag is used to
change it.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal)
(qemuDomainSaveImageOpen): Adjust signature.
(qemuDomainSaveFlags, qemuDomainManagedSave)
(qemuDomainRestoreFlags, qemuDomainSaveImageGetXMLDesc)
(qemuDomainSaveImageDefineXML, qemuDomainObjRestore): Adjust
callers.
While it is nice that snapshots and saved images remember whether
the domain was running or paused, sometimes the restoration phase
wants to guarantee a particular state (paused to allow hot-plugging,
or running without needing to call resume). This introduces new
flags to allow the control, and a later patch will implement the
flags for qemu.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SAVE_RUNNING)
(VIR_DOMAIN_SAVE_PAUSED, VIR_DOMAIN_SNAPSHOT_REVERT_RUNNING)
(VIR_DOMAIN_SNAPSHOT_REVERT_PAUSED): New flags.
* src/libvirt.c (virDomainSaveFlags, virDomainRestoreFlags)
(virDomainManagedSave, virDomainSaveImageDefineXML)
(virDomainRevertToSnapshot): Document their use, and enforce
mutual exclusion.
There are two classes of management apps that track events - one
that only cares about on/off (and only needs to track EVENT_STARTED
and EVENT_STOPPED), and one that cares about paused/running (also
tracks EVENT_SUSPENDED/EVENT_RESUMED). To keep both classes happy,
any transition that can go from inactive to paused must emit two
back-to-back events - one for started and one for suspended (since
later resuming of the domain will only send RESUMED, but the first
class isn't tracking that).
This also fixes a bug where virDomainCreateWithFlags with the
VIR_DOMAIN_START_PAUSED flag failed to start paused when restoring
from a managed save image.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_EVENT_SUSPENDED_RESTORED)
(VIR_DOMAIN_EVENT_SUSPENDED_FROM_SNAPSHOT)
(VIR_DOMAIN_EVENT_RESUMED_FROM_SNAPSHOT): New sub-events.
* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Use them.
(qemuDomainSaveImageStartVM): Likewise, and add parameter.
(qemudDomainCreate, qemuDomainObjStart): Send suspended event when
starting paused.
(qemuDomainObjRestore): Add parameter.
(qemuDomainObjStart, qemuDomainRestoreFlags): Update callers.
* examples/domain-events/events-c/event-test.c
(eventDetailToString): Map new detail strings.
QEMU uses USB bus name "usb.0" when using the legacy -usb argument.
If we want to allow USB devices to specify their addresses with legacy
-usb, we should either in case of legacy bus name drop the 0 from the
address bus, or just drop the 0 from device id. This patch does the
later.
Another solution would be to permit addressing on non-legacy USB
controllers only.
So that devices can be attached to hubs. Example, to attach to first
port of a usb-hub on port 1.
<hub type='usb'>
<address type='usb' bus='0' port='1'/>
</hub>
<input type='mouse' type='usb'>
<address type='usb' bus='0' port='1.1'/>
</hub>
also add a test entry
Commit 6766ff10 introduced a corner case bug with snapshot creation:
if a snapshot is created, but then we hit OOM while trying to
create the return value of the function, then we have polluted the
internal directory with the snapshot metadata with no way to clean
it up from the running libvirtd.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Don't
write metadata file on OOM condition.
Newer QEMU introduced cache=directsync for -drive, this patchset
is to expose it in libvirt layer.
* Introduced a new QEMU capability flag ($prefix_CACHE_DIRECTSYNC),
As even $prefix_CACHE_V2 is set, we can't known if directsync
is supported.
This patch adds the ability to make the filesystem for a filesystem
pool during a pool build.
The patch adds two new flags, no overwrite and overwrite, to control
when mkfs gets executed. By default, the patch preserves the
current behavior, i.e., if no flags are specified, pool build on a
filesystem pool only makes the directory on which the filesystem
will be mounted.
If the no overwrite flag is specified, the target device is checked
to determine if a filesystem of the type specified in the pool is
present. If a filesystem of that type is already present, mkfs is
not executed and the build call returns an error. Otherwise, mkfs
is executed and any data present on the device is overwritten.
If the overwrite flag is specified, mkfs is always executed, and any
existing data on the target device is overwritten unconditionally.
Several users have reported problems with 'virsh start' failing because
it was encountering a managed save situation where the managed save file
was incomplete. Be more robust to this by using two different magic
numbers, so that newer libvirt can gracefully handle an incomplete file
differently than a complete one, while older libvirt will at least fail
up front rather than trying to load only to have qemu fail at the end.
Managed save is a convenience - it exists to preserve as much state
as possible; if the state was not preserved, it is reasonable to just
log that fact, then proceed with a fresh boot. On the other hand,
user saves are under user control, so we must fail, but by making
the failure message distinct, the user can better decide how to handle
the situation of an incomplete save file.
* src/qemu/qemu_driver.c (QEMUD_SAVE_PARTIAL): New define.
(qemuDomainSaveInternal): Use it to mark incomplete images.
(qemuDomainSaveImageOpen, qemuDomainObjRestore): Add parameter
that controls what to do with partial images.
(qemuDomainRestoreFlags, qemuDomainSaveImageGetXMLDesc)
(qemuDomainSaveImageDefineXML, qemuDomainObjStart): Update callers.
Based on an initial idea by Osier Yang.
In a SELinux or root-squashing NFS environment, libvirt has to go
through some hoops to create a new file that qemu can then open()
by name. Snapshots are a case where we want to guarantee an empty
file that qemu can open; also, reopening a save file to convert it
from being marked partial to complete requires a reopen to avoid
O_DIRECT headaches. Refactor some existing code to make it easier
to reuse in later patches.
* src/qemu/qemu_migration.h (qemuMigrationToFile): Drop parameter.
* src/qemu/qemu_migration.c (qemuMigrationToFile): Let cgroup do
the stat, rather than asking caller to do it and pass info down.
* src/qemu/qemu_driver.c (qemuOpenFile): New function, pulled from...
(qemuDomainSaveInternal): ...here.
(doCoreDump, qemuDomainSaveImageOpen): Use it here as well.
After supporting multi function pci device, we only reserve function 1 on slot 1.
The user can use the other function on slot 1 in the xml config file. We should
detect this wrong usage.
Currently, the lxc implementation invokes 'ip' and 'ifconfig' commands
inside a container using 'virRun'. That has the side effect of requiring
those commands to be present and to function in a manner consistent with
the usage. Some small roots (such as ttylinux) may not have 'ip' or
'ifconfig'.
This patch replaces the use of these commands with usage of
netdevice. The result is that lxc containers do not have to implement
those commands, and lxc in libvirt is only dependent on the netdevice
interface.
I've tested this patch locally against the ubuntu libvirt version enough
to verify its generally sane. I attempted to build upstream today, but
failed with:
/usr/bin/ld:
../src/.libs/libvirt_driver_qemu.a(libvirt_driver_qemu_la-qemu_domain.o):
undefined reference to symbol 'xmlXPathRegisterNs@@LIBXML2_2.4.30
Thats probably a local issue only, but I wanted to get this patch up and
see what others thought of it. This is ubuntu bug
https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/828211 .
Hi,
I'm seeing an issue with udev and libvirt-lxc. Libvirt-lxc creates
/dev/ptmx as a symlink to /dev/pts/ptmx. When udev starts up, it
checks the device type, sees ptmx is 'not right', and replaces it
with a 'proper' ptmx.
In lxc, /dev/ptmx is bind-mounted from /dev/pts/ptmx instead of being
symlinked, so udev sees the right device type and leaves it alone.
A patch like the following seems to work for me. Would there be
any objections to this?
>From 4c5035de52de7e06a0de9c5d0bab8c87a806cba7 Mon Sep 17 00:00:00 2001
From: Ubuntu <ubuntu@domU-12-31-39-14-F0-B3.compute-1.internal>
Date: Wed, 31 Aug 2011 18:15:54 +0000
Subject: [PATCH 1/1] make ptmx a bind mount rather than symlink
udev on some systems checks the device type of /dev/ptmx, and replaces it if
not as expected. The symlink created by libvirt-lxc therefore gets replaced.
By creating it as a bind mount, the device type is correct and udev leaves it
alone.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
The libvirt BlockPull API supports the use of an initial bandwidth limit but the
qemu block_stream API does not. To get the desired behavior we use the two APIs
strung together: first BlockPull, then BlockJobSetSpeed. We can do this at the
driver level to avoid duplicated code in each monitor path.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Due to an unfortunate precedent in qemu, the units for the bandwidth parameter
to block_job_set_speed are different between the text monitor and the qmp
monitor. While the qmp monitor uses bytes/s, the text monitor expects MB/s.
Correct the units for the text interface.
Signed-off-by: Adam Litke <agl@us.ibm.com>
On systems with many pcpus, the sexpr returned by xend can be quite
large for dom0 when it is configured to have #vcpus = #pcpus (default).
E.g. on a 80 pcpu system, where dom0 had 80 vcpus, the sexpr details
for dom0 was 73817 bytes! Increase maximum buffer size to 256k.
xenDaemonDomainFetch() was overwriting errors reported by
xend_get() and xend_req(). E.g. without patch
error: failed Xen syscall xenDaemonDomainFetch failed to find this domain
with patch
error: internal error Xend returned HTTP Content-Length of 73817, which exceeds
maximum of 65536
Commit 2c85644b0b attempted to
fix a problem with tracking RPC messages from streams by doing
- if (msg->header.type == VIR_NET_REPLY) {
+ if (msg->header.type == VIR_NET_REPLY ||
+ (msg->header.type == VIR_NET_STREAM &&
+ msg->header.status != VIR_NET_CONTINUE)) {
client->nrequests--;
In other words any stream packet, with status NET_OK or NET_ERROR
would cause nrequests to be decremented. This is great if the
packet from from a synchronous virStreamFinish or virStreamAbort
API call, but wildly wrong if from a server initiated abort.
The latter resulted in 'nrequests' being decremented below zero.
This then causes all I/O for that client to be stopped.
Instead of trying to infer whether we need to decrement the
nrequests field, from the message type/status, introduce an
explicit 'bool tracked' field to mark whether the virNetMessagePtr
object is subject to tracking.
Also add a virNetMessageClear function to allow a message
contents to be cleared out, without adversely impacting the
'tracked' field as a naive memset() would do
* src/rpc/virnetmessage.c, src/rpc/virnetmessage.h: Add
a 'bool tracked' field and virNetMessageClear() API
* daemon/remote.c, daemon/stream.c, src/rpc/virnetclientprogram.c,
src/rpc/virnetclientstream.c, src/rpc/virnetserverclient.c,
src/rpc/virnetserverprogram.c: Switch over to use
virNetMessageClear() and pass in the 'bool tracked' value
when creating messages.
Parted does not report disk size in 512 byte units, but
rather the disks' logical sector size, which with modern
drives might be 4k.
* src/storage/parthelper.c: Remove hardcoded 512 byte sector
size
Introduced by 5e495c8b, except the ones for checking if numa
is supported by host, all the NO_SUPPORT are changed back. For
the ones about numa checking, change them into INTERNAL_ERROR.
If the libxl driver is compiled in, then everytime libvirtd
starts up on a non-Xen Dom0 host, it logs a error message.
Since this is an expected condition, we should not log at
'error' level, only 'info'.
* src/libxl/libxl_driver.c: Lower log level for certain
expected errors during driver init
It is possible (expected/likely in Fedora 15) for a cgroup controller
to be mounted in multiple locations at the same time, due to bind
mounts. Currently we leak memory if this happens, because we overwrite
the previous 'mountPoint' string. Instead just accept the first match
we find.
* src/util/cgroup.c: Only accept first match for a cgroup
controller mount
The virSecurityManagerSetProcessFDLabel method was introduced
after a mis-understanding from a conversation about SELinux
socket labelling. The virSecurityManagerSetSocketLabel method
should have been used for all such scenarios.
* src/security/security_apparmor.c, src/security/security_apparmor.c,
src/security/security_driver.h, src/security/security_manager.c,
src/security/security_manager.h, src/security/security_selinux.c,
src/security/security_stack.c: Remove SetProcessFDLabel driver
It is not possible to change the label of a TCP socket once it
has been opened. When creating a TCP socket care must be taken
to ensure the socket creation label is set & then cleared.
Remove the bogus call to virSecurityManagerSetProcessFDLabel
from the lock driver guest setup code and instead make use of
virSecurityManagerSetSocketLabel
The code for creating a sanlock lockspace accidentally used
SANLK_NAME_LEN instead of SANLK_PATH_LEN for a size check.
This meant disk paths were limited to 48 bytes !
* src/locking/lock_driver_sanlock.c: Fix disk path length
check
There is no reason to forbid pausing an autodestroy domain
(not to mention that 'virsh start --paused --autodestroy'
succeeds in creating a paused autodestroy domain).
Meanwhile, qemu was failing to enforce the API documentation that
autodestroy domains cannot be saved. And while the original
documentation only mentioned save/restore, snapshots are another
form of saving that are close enough in semantics as to make no
sense on one-shot domains.
* src/qemu/qemu_driver.c (qemudDomainSuspend): Drop bogus check.
(qemuDomainSaveInternal, qemuDomainSnapshotCreateXML): Forbid
saves of autodestroy domains.
* src/libvirt.c (virDomainCreateWithFlags, virDomainCreateXML):
Document snapshot interaction.
According to qemu-kvm/qerror.c all messages start with a capital
"Device ", but the current code only scans for the lower case "device ".
This results in "virDomainUpdateDeviceFlags()" to not detect locked
CD-ROMs and reporting success even in the case of a failure:
# virsh qemu-monitor-command "$VM" change\ drive-ide0-0-0\ \"/var/lib/libvirt/images/ucs_2.4-0-sec4-20110714145916-dvd-amd64.iso\"
Device 'drive-ide0-0-0' is locked
# virsh update-device "$VM" /dev/stdin <<<"<disk type='file' device='cdrom'><driver name='qemu' type='raw'/><source file='/var/lib/libvirt/images/ucs_2.4-0-sec4-20110714145916-dvd-amd64.iso'/><target dev='hda' bus='ide'/><readonly/><alias name='ide0-0-0'/><address type='drive' controller='0' bus='0' unit='0'/></disk>"
Device updated successfully
Signed-off-by: Philipp Hahn <hahn@univention.de>
There have been several instances of people having problems with
a broken managed save file, and not aware that they could use
'virsh managedsave-remove dom' to fix things. Making it possible
to do this as part of starting a domain makes the same functionality
easier to find, and one less API call.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_START_FORCE_BOOT): New
flag.
* src/libvirt.c (virDomainCreateWithFlags): Document it.
* src/qemu/qemu_driver.c (qemuDomainObjStart): Alter signature.
(qemuAutostartDomain, qemuDomainStartWithFlags): Update callers.
* tools/virsh.c (cmdStart): Expose it in virsh.
* tools/virsh.pod (start): Document it.
Back in 2008 when this line of util.h was written, gnulib's verify
module didn't allow the use of multiple verify() in one file
in combination with our choice of gcc -W options. But that has
since been fixed in gnulib, and newer gnulib even maps verify()
to the C1x feature of _Static_assert, which gives even nicer
diagnostics with a new enough compiler, so we might as well go
with the simpler verify().
* src/util/util.h (VIR_ENUM_IMPL): Use simpler verify, now that
gnulib module is smarter.
Commit 3261761 made it possible to use pipes instead of sockets
for outgoing tunneled migration; however, it caused a regression
because the pipe was never given a SELinux label.
* src/qemu/qemu_migration.c (doTunnelMigrate): Label outgoing pipe.
The bufferOffset has been initialized to zero in virNetMessageEncodePayloadRaw(),
so, we use bufferLength to represent the length of message which is going to be
sent to client side.
From: Matthias Bolte <matthias.bolte@googlemail.com>
Tested-by: Jim Fehlig <jfehlig@novell.com>
Matthias provided this patch to fix an issue I encountered in the
generator with APIs containing call-by-ref long type, e.g.
int virDomainMigrateGetMaxSpeed(virDomainPtr domain,
unsigned long *bandwidth,
unsigned int flags);
