The persistent alias name @persistent is allocated in
virDomainNetDefParseXML() but never freed.
==119642== 22 bytes in 2 blocks are definitely lost in loss record 178 of 671
==119642== at 0x483579F: malloc (vg_replace_malloc.c:309)
==119642== by 0x58F89F1: xmlStrndup (in /usr/lib64/libxml2.so.2.9.9)
==119642== by 0x4BA3B74: virXMLPropString (virxml.c:520)
==119642== by 0x4BDB0C5: virDomainNetDefParseXML (domain_conf.c:11876)
==119642== by 0x4BF9EF4: virDomainDefParseXML (domain_conf.c:21196)
==119642== by 0x4BFCD5B: virDomainDefParseNode (domain_conf.c:21943)
==119642== by 0x4BFCC36: virDomainDefParse (domain_conf.c:21901)
==119642== by 0x4BFCCCB: virDomainDefParseFile (domain_conf.c:21924)
==119642== by 0x114A9D: testCompareXMLToArgv (qemuxml2argvtest.c:452)
==119642== by 0x13894F: virTestRun (testutils.c:143)
==119642== by 0x11F46E: mymain (qemuxml2argvtest.c:1316)
==119642== by 0x13A60E: virTestMain (testutils.c:839
Fixes: fb0509d06a
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The privateData object is allocated in virDomainFSDefNew() but
never unref'd.
==119642== 480 bytes in 20 blocks are definitely lost in loss record 656 of 671
==119642== at 0x4837B86: calloc (vg_replace_malloc.c:762)
==119642== by 0x57806A0: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6000.7)
==119642== by 0x4AE7392: virAllocVar (viralloc.c:331)
==119642== by 0x4B64395: virObjectNew (virobject.c:241)
==119642== by 0x48F1464: qemuDomainFSPrivateNew (qemu_domain.c:1427)
==119642== by 0x4BBF004: virDomainFSDefNew (domain_conf.c:2307)
==119642== by 0x4BD859A: virDomainFSDefParseXML (domain_conf.c:11217)
==119642== by 0x4BF9DD1: virDomainDefParseXML (domain_conf.c:21179)
==119642== by 0x4BFCD5B: virDomainDefParseNode (domain_conf.c:21943)
==119642== by 0x4BFCC36: virDomainDefParse (domain_conf.c:21901)
==119642== by 0x4BFCCCB: virDomainDefParseFile (domain_conf.c:21924)
==119642== by 0x114A9D: testCompareXMLToArgv (qemuxml2argvtest.c:452)
Fixes: 5120577ed7
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
During the hypervisor-agnostic validation of network devices, verify
that the interface type is either "network" or "bridge", and that if
there is any <virtualport>, that it doesn't have any type associated
with it.
This needs to be done both for the parse-time validation and for
runtime validation (after a port has been acquired from any associated
network), because an interface with type='network' could have an
actual type at runtime of "hostdev" or "direct", neither of which
support isolated='true' (yet). Likewise, if an interface is
type='network', then at runtime a <virtualport> with a type that
doesn't support isolated='yes' (e.g. "openvswitch", "802.1Qbh" -
currently *none* of the available virtualport types support it)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch pushes the isolatedPort setting from the <interface> down
all the way to the callers of virNetDevBridgeAddPort(), and sets
BR_ISOLATED on the port (using virNetDevBridgePortSetIsolated()) after
the port has been successfully added to the bridge.
Signed-off-by: Laine Stump <laine@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similar to the way that the <vlan>, <bandwidth>, and <virtualport>
elements and the trustGuestRxFilters attribute in a <network> (or in
the appropriate <portgroup> element of a <network> can be applied to a
port when it is allocated for a domain's network interface, this patch
checks for a configured value of <port isolated="yes|no"/> in
either the domain <interface> or in the network, setting isolatedPort
in the <networkport> to the first one it finds (the setting from the
domain's <interface> is preferred). This, in turn, is passed back to
the domain when a port is allocated, so that the domain will use that
setting.
(One difference from <vlan>, <bandwidth>, <virtualport>, and
trustGuestRxFilters, is that all of those can be set in a <portgroup>
so that they can be applied only to a subset of interfaces connected
to the network. This didn't really make sense for the isolated setting
due to the way that it's implemented in Linux - the BR_ISOLATED flag
will prevent traffic from passing between two ports that both have
BR_ISOLATED set, but traffic can still go between those ports and
other ports that *don't* have BR_ISOLATED. (It would be nice if all
traffic from a BR_ISOLATED port could be blocked except traffic going
to/from a designated egress port or ports, but instead the entire
feature is implemented as a single flag. Because of this, it's really
only useful if all the ports on a network are isolated, so setting it
for a subset has no practical utility.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a very simple thing to parse and format, but needs to be done
in 4 places, so two trivial utility functions have been made that can
be called from all the higher level parser/formatters:
<domain><interface>
<domain><interface><actual> (only in domain status)
<network>
<networkport>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new timer model will be used to control the behavior of the
virtual timer for KVM ARM/virt guests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we accept full backing chains on input nothing should prevent
users from also using disk type 'VOLUME' for specifying the backing
images.
Do the translation for the whole backing chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract all the code setting up one storage source from the rest which
sets up the whole disk. This will allow us to prepare the whole backing
chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Only 'def->src' was ever used in this function. Use the source directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Only 'def->src' was ever used in this function. Use the source directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Only 'def->src' was ever used in this function. Use the source directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virStringSplitCount instead of virStringSplit so that we can drop
the call to virStringListLength and use VIR_AUTOSTRINGLIST to declare
it and allow removal of the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for the tpm-spapr device model for ppc64. The XML for
this type of TPM looks as follows:
<tpm model='tpm-spapr'>
<backend type='emulator'/>
</tpm>
Extend the documentation.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Introduce VIR_DOMAIN_TPM_MODEL_DEFAULT as a default model which we use
in case the user does not provide a model in the device XML. It has
the TIS's previous value of '0'. In the post parsing function
we change this default value to 'TIS' to have the same model as before.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Technically, there is no memleak here, since the only
allocations are filled by virDomainDeviceInfoParseXML,
which cleans up after itself.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Simple g_autofree is not enough if we put allocated
data into the device structure.
Define the AUTOPTR_CLEANUP function and use it here.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Xu Yandong <xuyandong2@huawei.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Always trim the full specified suffix.
All of the callers outside of tests were passing either
strlen or the actual length of the string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The subelement <teaming> of <interface> devices is used to configure a
simple teaming association between two interfaces in a domain. Example:
<interface type='bridge'>
<source bridge='br0'/>
<model type='virtio'/>
<mac address='00:11:22:33:44:55'/>
<alias name='ua-backup0'/>
<teaming type='persistent'/>
</interface>
<interface type='hostdev'>
<source>
<address type='pci' bus='0x02' slot='0x10' function='0x4'/>
</source>
<mac address='00:11:22:33:44:55'/>
<teaming type='transient' persistent='ua-backup0'/>
</interface>
The interface with <teaming type='persistent'/> is assumed to always
be present, while the interface with type='transient' may be be
unplugged and later re-plugged; the persistent='blah' attribute (and
in the one currently available implementation, also the matching MAC
addresses) is what associates the two devices with each other. It is
up to the hypervisor and the guest network drivers to determine what
to do with this information.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently it is possible to start a domain which have disks
in same iotune group and at the same time having different iotune
params. Both params set are passed to qemu in command line and the one
that is passed later down command line is get actually set.
Let's prohibit such configurations.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, if only iotune group name is given for some disk and
no any params then later start of domain will fail. I guess it
will be convenient to allow such configuration if there is
another disk in the same iotune group with iotune params set. The
meaning is that the first disk have same iotunes and the latter.
Thus one can easily add a disk to iotune group - just add group
name parameter and no need to copy all the params.
Also let's expand iotunes params in the described case so we don't
need to refer to another disk to know iotunes and this will make
logic in many places simple.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
And introduce virDomainBlockIoTuneInfoHasAny.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some *ParseXML functions have comments stating what kind of device
they parse with an outdated list of parameters, with the exception
of virDomainFSDefParseXML which claims to parse a disk.
Remove them, assuming the function names are descriptive enough.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use the virXMLFormatElement helper to format the driver element
to simplify adding further sub-elements.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'builtin' rng backend model can be used as following:
<rng model='virtio'>
<backend model='builtin'/>
</rng>
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU driver has two functions: qemuGetDHCPInterfaces() and
qemuARPGetInterfaces() that are being used inside only one single
function. They can be turned into generic functions that other drivers
can use. This commit move both from QEMU driver tree to domain conf
tree.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
gmtime_r/localtime_r are mostly used in combination with
strftime to format timestamps in libvirt. This can all
be replaced with GDateTime resulting in simpler code
that is also more portable.
There is some boundary condition problem in parsing POSIX
timezone offsets in GLib which tickles our test suite.
The test suite is hacked to avoid the problem. The upsteam
GLib bug report is
https://gitlab.gnome.org/GNOME/glib/issues/1999
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Recently CPU hardware vendors have started to support a new structure
inside the CPU package topology known as a "die". Thus the hierarchy
is now:
sockets > dies > cores > threads
This adds support for "dies" in the XML parser, with the value
defaulting to 1 if not specified for backwards compatibility.
For example a system with 64 logical CPUs might report
<topology sockets="4" dies="2" cores="4" threads="2"/>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As of systemd commit:
commit d65652f1f21a4b0c59711320f34266c635393c89
Author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
CommitDate: 2018-12-10 09:56:56 +0100
Partially unify hostname_is_valid() and dns_name_is_valid()
Dashes are no longer allowed at the end of machine names.
Trim the trailing dashes from the generated name before passing
it to machined.
https://bugzilla.redhat.com/show_bug.cgi?id=1790409
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When trying to specify an input device on s390x without bus like this:
<input type='keyboard'/>
... then libvirt currently complains:
error: unsupported configuration: USB is disabled for this domain,
but USB devices are present in the domain XML
This is somewhat confusing since the user did not specify an USB
device here. Since USB is not available on s390x, we should default
to the "virtio" bus here instead.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1790189
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically there are two places where we format authentication and
encryption for a disk. The logich which formats it for backing files was
flawed though and didn't format it at all. This worked if the image
became a backing file through the means of a snapshot but not directly.
Force formatting of the source and encryption for any non-disk case to
fix the issue.
This caused problems in many places as we use the formatter to copy the
definition. Effectively any copy lost the secret definition.
https://bugzilla.redhat.com/show_bug.cgi?id=1789310https://bugzilla.redhat.com/show_bug.cgi?id=1788898
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add an object to hold the private data and call the
allocation function if it's present in xmlopt.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will be needed in the future for allocating private data.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These functions are meant to replace verbose check for the old
style of specifying UEFI with a simple function call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The g_date_time_new_from_iso8601() function was introduced as
a replacement for strptime in
commit 810613a60e
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon Dec 23 15:37:26 2019 +0000
src: replace strptime()/timegm()/mktime() with GDateTime APIs set
Unfortunately g_date_time_new_from_iso8601 isn't available until
glib 2.56, and backporting it requires alot of code copying and
poking at private glib structs.
This reverts domain_conf.c back to its original parsing logic prior
to 810613a60e, but using g_date_time_new()
instead of gmtime(). The other files are then adapted to follow a
similar approach.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All places where we use strptime/timegm()/mktime() are handling
conversion of dates in a format compatible with ISO 8601, so we
can use the GDateTime APIs to simplify code.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch introduces a new PCI hostdev address type called
'unassigned'. This new type gives users the option to add
PCI hostdevs to the domain XML in an 'unassigned' state, meaning
that the device exists in the domain, is managed by Libvirt
like any regular PCI hostdev, but the guest does not have
access to it.
This adds extra options for managing PCI device binding
inside Libvirt, for example, making all the managed PCI hostdevs
declared in the domain XML to be detached from the host and bind
to the chosen driver and, at the same time, allowing just a
subset of these devices to be usable by the guest.
Next patch will use this new address type in the QEMU driver to
avoid adding unassigned devices to the QEMU launch command line.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function will return true if any of disks (or their backing
chain) for given domain contains an NVMe disk.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
To simplify implementation, some restrictions are added. For
instance, an NVMe disk can't go to any bus but virtio and has to
be type of 'disk' and can't have startupPolicy set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Following domain configuration changes create two memory bandwidth
monitors: one is monitoring the bandwidth consumed by vCPU 0,
another is for vCPU 5.
```
<cputune>
<memorytune vcpus='0-4'>
<node id='0' bandwidth='20'/>
<node id='1' bandwidth='30'/>
+ <monitor vcpus='0'/>
</memorytune>
+ <memorytune vcpus='5'>
+ <monitor vcpus='5'/>
+ </memorytune>
</cputune>
```
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Huaqiang <huaqiang.wang@intel.com>
A backup job may consist of many backup sub-blockjobs. Add the new
blockjob type and add all type converter strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This parameter is now unused and can be removed entirely.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the impls of this callback require the virCapsPtr param.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the impls of this callback require the virCapsPtr param.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
No impl of this callback requires the virCapsPtr anymore.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only user of this callback did not require the virCapsPtr parameter.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU impl of the callback can directly use the QEMU capabilities
cache to resolve the emulator binary name, allowing virCapsPtr to be
dropped.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virCapsPtr param is not used by any of the virt drivers providing
this callback.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using the virCapsPtr to get the default security model,
pass this in via the parser config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the disk and chardev seclabels are validated immediately at
the time their data is parsed. This forces the parser to fill in the
top level secmodel at time of parsing which is an undesirable thing.
This validation conceptually should be done in the post-parse phase
instead.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using the virCapsPtr information, pass the driver specific
netprefix in the domain parser struct. This eliminates one more use of
virCapsPtr from the XML parsing/formatting code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The XML parser currently calls virCapabilitiesDomainDataLookup during
parsing to find the domain capabilities matching the triple
(virt type, os type, arch)
This is, however, bogus with the QEMU driver as it assumes that there
is an emulator known to the default driver capabilities that matches
this triple. It is entirely possible for the driver to be parsing an
XML file with a custom emulator path specified pointing to a binary
that doesn't exist in the default driver capabilities. This will,
for example be the case on a RHEL host which only installs the host
native emulator to /usr/bin. The user can have built a custom QEMU
for non-native arches into $HOME and wish to use that.
Aside from validation, this call is also used to fill in a machine type
for the guest if not otherwise specified. Again, this data may be
incorrect for the QEMU driver because it is not taking account of
the emulator binary that is referenced.
To start fixing this, move the validation to the post-parse callbacks
where more intelligent driver specific logic can be applied.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When parsing the guest XML we must fill in the default guest arch if it
is not already present because later parts of the parsing process need
this information.
If no arch is specified we lookup the first guest in the capabilities
data matching the os type and virt type. In most cases this will result
in picking the host architecture but there are some exceptions...
- The test driver is hardcoded to always use i686 arch
- The VMWare/ESX drivers will always place i686 guests ahead
of x86_64 guests in capabilities, so effectively they always
use i686
- The QEMU driver can potentially return any arch at all
depending on what combination of QEMU binaries are installed.
The domain XML hardware configurations are inherently architecture
specific in many places. As a result whomever/whatever created the
domain XML will have had a particular architecture in mind when
specifying the config. In pretty much any sensible case this arch
will have been the native host architecture. i686 on x86_64 is
the only sensible divergance because both these archs are
compatible from a domaain XML config POV.
IOW, although the QEMU driver can pick an almost arbitrary arch as its
default, in the real world no application or user is likely to be
relying on this default arch being anything other than native.
With all this in mind, it is reasonable to change the XML parser to
allow the default architecture to be passed via the domain XML options
struct. If no info is explicitly given then it is safe & sane to pick
the host native architecture as the default for the guest.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Moving their instance parameter to be the first one, and give consistent
ordering of other parameters across all functions. Ensure that the xml
options are passed into both functions in prep for future work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our normal practice is for the object type to be the name prefix, and
the object instance be the first parameter passed in.
Rename these to virDomainObjSave and virDomainDefSave moving their
primary parameter to be the first one. Ensure that the xml options
are passed into both functions in prep for future work.
Finally enforce checking of the return type and mark all parameters
as non-NULL.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With this patch users can cold unplug some sound devices.
use "virsh detach-device vm sound.xml --config" command.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jidong Xia <xiajidong@cmss.chinamobile.com>
Introduced in c8007fdc5d, it should use 'greater than max' instead of
'equal or greater than max' for the condition of checking invalid scsi
unit.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the past the network driver was (mistakenly) being called for all
interfaces, not just those of type='network', and so it had a chance
to validate all interface configs after the actual type of the
interface was known.
But since the network driver has been more completely/properly
separated from qemu, the network driver isn't called during the
startup of any interfaces except those with type='network', so this
validation no longer takes place for, e.g. <interface type='bridge'>
(or direct, etc). This in turn meant that a config could erroneously
specify a vlan tag, or bandwidth settings, for a type of interface
that didn't support it, and the domain would start without complaint,
just silently ignoring those settings.
This patch moves those validation checks out of the network driver,
and into virDomainActualNetDefValidate() so they will be done for all
interfaces, not just type='network'.
https://bugzilla.redhat.com/1741121
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
<interface> devices (virDomainNetDef) are a bit different from other
types of devices in that their actual type may come from a network (in
the form of a port connection), and that doesn't happen until the
domain is started. This means that any validation of an <interface> at
parse time needs to be a bit liberal in what it accepts - when
type='network', you could think that something is/isn't allowed, but
once the domain is started and a port is created by the configured
network, the opposite might be true.
To solve this problem hypervisor drivers need to do an extra
validation step when the domain is being started. I recently (commit
3cff23f7, libvirt 5.7.0) added a function to peform such validation
for all interfaces to the QEMU driver -
qemuDomainValidateActualNetDef() - but while that function is a good
single point to call for the multiple places that need to "start" an
interface (domain startup, device hotplug, device update), it can't be
called by the other hypervisor drivers, since 1) it's in the QEMU
driver, and 2) it contains some checks specific to QEMU. For
validation that applies to network devices on *all* hypervisors, we
need yet another interface validation function that can be called by
any hypervisor driver (not just QEMU) right after its network port has
been created during domain startup or hotplug. This patch adds that
function - virDomainActualNetDefValidate(), in the conf directory,
and calls it in appropriate places in the QEMU, lxc, and libxl
drivers.
This new function is the place to put all network device validation
that 1) is hypervisor agnostic, and 2) can't be done until we know the
"actual type" of an interface.
There is no framework for validation at domain startup as there is for
post-parse validation, but I don't want to create a whole elaborate
system that will only be used by one type of device. For that reason,
I just made a single function that should be called directly from the
hypervisors, when they are initializing interfaces to start a domain,
right after conditionally allocating the network port (and regardless
of whether or not that was actually needed). In the case of the QEMU
driver, qemuDomainValidateActualNetDef() is already called in all the
appropriate places, so we can just call the new function from
there. In the case of the other hypervisors, we search for
virDomainNetAllocateActualDevice() (which is the hypervisor-agnostic
function that calls virNetworkPortCreateXML()), and add the call to our
new function right after that.
The new function itself could be plunked down into many places in the
code, but we already have 3 validation functions for network devices
in 2 different places (not counting any basic validation done in
virDomainNetDefParseXML() itself):
1) post-parse hypervisor-agnostic
(virDomainNetDefValidate() - domain_conf.c:6145)
2) post-parse hypervisor-specific
(qemuDomainDeviceDefValidateNetwork() - qemu_domain.c:5498)
3) domain-start hypervisor-specific
(qemuDomainValidateActualNetDef() - qemu_domain.c:5390)
I placed (3) right next to (2) when I added it, specifically to avoid
spreading validation all over the code. For the same reason, I decided
to put this new function right next to (1) - this way if someone needs
to add validation specific to qemu, they go to one location, and if
they need to add validation applying to everyone, they go to the
other. It looks a bit strange to have a public function in between a
bunch of statics, but I think it's better than the alternative of
further fragmentation. (I'm open to other ideas though, of course.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
These all just return a scalar value, so there's no daisy-chained
fallout from changing them, and they can easily be combined in a
single patch.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This also isn't required (due to the vportprofile being stored in the
NetDef as a pointer rather than being directly contained), but it
seemed dishonest to not mark it as const (and thus permit users to
modify its contents)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In this case, the virNetDevBandwidthPtr that is returned is not to a
region within the virDomainNetDef arg, but points elsewhere (the
NetDef has the pointer, not the entire object), so technically it's
not necessary to make the return value a const, but it's a bit
disingenuous to *not* do it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This is needed if we want to call the function when the
virDomainNetDef* we have is a const.
Since virDomainNetGetActualVlan returns a pointer to memory that is
within the virDomainNetDefPtr arg, the returned pointer must also be
made const. This leads to a cascade of other virNetDevVlanPtr's that
must be changed to "const virNetDevVlan *".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Ensure that both x and y are non-zero when resolution is specified for a
video device.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Since this function is now only called when an 'acceleration' element is
present in the xml, any failure to parse the element will be considered
an error.
Previously, we detected some types of errors, but we would only log an
error (virReportError()), but still return a partially-specified accel
object to the caller. This patch returns NULL for all parsing errors and
reports that error back up to the caller.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
The current code doesn't properly handle errors when parsing a video
device's resolution. We were returning a NULL structure for the case
where 'x' or 'y' were missing. But for the other error cases, we were
logging an error (virReportError()), but still returning an
under-specified structure. That under-specified structure was used by
the calling function rather than properly reporting an error.
This patch changes the parse function to return NULL on any parsing
error and changes the calling function to report an error when NULL is
returned.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Previously, we were passing the video "model" node to the "acceleration"
and "resolution" parsing functions and requiring them to iterate over
the children to discover and parse the appropriate node. It makes more
sense to move this responsibility up to the parent function and just
pass these functions the node that needs to be parsed.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
The 'ramfb' attribute provides a framebuffer to the guest that can be
used as a boot display for the vgpu
For example, the following configuration can be used to provide a vgpu
with a boot display:
<hostdev mode='subsystem' type='mdev' model='vfio-pci' display='on' ramfb='on'>
<source>
<address uuid='$UUID'/>
</source>
</hostdev>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
This helper performs a conversion from a "yes|no" string
to a corresponding boolean, and several conversions were
already done, but there are still some omissions.
For most of the remaining usages in domain_conf.c only
"yes" is explicitly checked for. This means all other
values are implicitly handled as 'false'. In this case,
use virStringParseYesNo to handle the conversion and
reserve the original logic of not raise an error, so
ignore the return value of helper.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
In preparation for some other improvements, switch to using glib
allocation and g_autofree when parsing the 'acceleration' and
'resolution' properties of the video device.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Just above in the function, we return from the function if either x or y
are NULL, so there's no need to re-check whether x or y are NULL.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Commit 72862797 introduced resolution settings for QEMU video drivers.
It includes a new structure inside video definition. So, the code needs
to clear pointer allocation for that structure into clear function
virDomainVideoDefClear(). This commit adds this missing VIR_FREE().
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Use the new helper to initialize child XML element buffers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The enum name sounds too generic. It in fact describes the capabilities
of the process, thus add 'Process' to the name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we don't have to deal with errors of virBuffer we can also make
this function void.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the conversion of all callers that would pass true as @dynamic to
a different function we can remove the unused argument now.
Additionally modify the return type to 'size_t' as indentation can't be
negative and remove checks whether @buf is passed as it's caller's duty
to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In few places we have the following code pattern:
int ret;
... /* @ret is not accessed here */
ret = f(...);
return ret;
This pattern can be written less verbose:
...
return f(...);
This patch was generated with following coccinelle spatch:
@@
type T;
constant C;
expression f;
identifier ret;
@@
-T ret = C;
... when != ret
-ret = f;
-return ret;
+return f;
Afterwards I needed to fix a few places, e.g. comment in
virDomainNetIPParseXML() was removed too because coccinelle
thinks it refers to @ret while in fact it doesn't. Also in few
places it replaced @ret declaration with a few spaces instead of
removing the line. But nothing terribly wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In domain_conf.c we have virDomainSCSIDriveAddressIsUsed()
function which returns true or false if given drive address is
already in use for given domain config or not. However, it also
takes a shortcut and returns true (meaning address in use) if the
unit number equals 7. This is because for some controllers this
is reserved address. The limitation comes mostly from vmware and
applies to lsilogic, buslogic, spapr-vscsi and vmpvscsi models.
On the other hand, we were not checking for the maximum unit
number (aka LUN number) which is also relevant and differs from
model to model.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
So far, the virDomainDeviceFindSCSIController() takes
virDomainDeviceInfo structure which is an overkill. It assumes
that the passed structure is type of
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_DRIVE which is not obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Previous commit removed last use of this function so we can get rid of
it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce a simpler replacement for virDomainDiskByName when looking up
by disk target.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The disk type is not part of source and thus it's parsed earlier. This
bypasses the checks when parsing a disk type='network' if it's
completely missing the source.
Since there are possible active users of this (it was reported as a
problem with openstack) fix it by resetting the disk type to '_FILE' for
an empty cdrom which is handled correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In some places we need to check if a hostdev has VFIO backend.
Because of how complicated virDomainHostdevDef structure is, the
check consists of three lines. Move them to a function and
replace all checks with the function call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace:
if (!s && VIR_STRDUP(s, str) < 0)
goto;
with:
if (!s)
s = g_strdup(str);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use a temporary variable to allow copying from the
currently set source.
Always return 0 since none of the callers distinguishes
between 0 and 1 propagated from VIR_STRDUP.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This commit adds resolution element with parameters 'x' and 'y' into video
XML domain group definition. Both, properties were added into an element
called 'resolution' and it was added inside 'model' element. They are set
as optional. This element does not follow QEMU properties 'xres' and
'yres' format. Both HTML documentation and schema were changed too. This
commit includes a simple test case to cover resolution for QEMU video
models. The new XML format for resolution looks like:
<model ...>
<resolution x='800' y='600'/>
</model>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Back in July 2009, in the days before libvirt supported explicitly
assigning a PCI address to every device, code was added to save the
PCI addresses of hotplugged network, disk, and hostdevs in the domain
status with this XML element:
<state devaddr='domain🚌slot'/>
This was added in commits 4e21a95a, 01654107, in v0.7.0, and 0c5b7b93
in v0.7.1.
Then just a few months later, in November 2009, The code that actually
formatted the "devaddr='blah'" into the status XML was removed by
commit 1b0cce7d3 (which "introduced a standardized data structure for
device addresses"). The code to *parse* the devaddr from the status
was left in for backward compatibility though (it just parses it into
the "standard" PCI address).
At the time the devaddr attribute was added, a few other attributes
already existed in the <state> element for network devices, and these
were removed over time (I haven't checked the exact dates of this),
but 10 years later, in libvirt v5.8.0, we *still* maintain code to
parse <state devaddr='blah'/> from the domain status.
In the meantime, even distros so old that we no longer support them in
upstream libvirt are using a libvirt new enough that it doesn't ever
write <state devaddr='blah'/> to the domain status XML.
Since the only way a current libvirt would ever encounter this element
would be if someone was upgrading directly from libvirt <= v0.7.5 with
running guests, it seems safe to finally remove the code that parses it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that all the types using VIR_AUTOUNREF have a cleanup func defined
to virObjectUnref, use g_autoptr instead of VIR_AUTOUNREF.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all of its use by the GLib
macro version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOCLEAN is just an alias for g_auto. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Also define the macro for building with GLib older than 2.60
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the ccf-assist pSeries
feature, based on the QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
capability that was added in the previous patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is a very simple framebuffer device supported by qemu that
is mostly intended to use as a boot framebuffer in conjunction with a
vgpu. However, there is also a standalone ramfb device that can be used
as a primary display device and is useful for e.g. aarch64 guests where
different memory mappings between the host and guest can prevent use of
other devices with framebuffers such as virtio-vga.
https://bugzilla.redhat.com/show_bug.cgi?id=1679680 describes the
issues in more detail.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
It is the only user. Rename it to match the local style
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We're using gnulib to get ffs, ffsl, rotl32, count_one_bits,
and count_leading_zeros. Except for rotl32 they can all be
replaced with gcc/clangs builtins. rotl32 is a one-line
trivial function.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Before the refactoring that properly separated the network driver from
the hypervisor driver and forced all interaction to go through public
APIs, all network usage counters were zeroed when the network driver
was initialized, and the network driver's now-deprecated
"semi-private" API networkNotifyActualDevice() was called for every
interface of every domain as each hypervisor "reconnected" its domains
during a libvirtd restart, and this would refresh the usage count for
each network.
Post-driver-split, during libvirtd restart/reconnection of the running
domains, the function virDomainNetNotifyActualDevice() is called by
each hypervisor driver for every interface of every domain restart,
and this function has code to re-register interfaces, but it only
calls into the network driver to re-register those ports that don't
already have a valid portid (ie. one that is not simply all 0),
assuming that those with valid portids are already known (and counted)
by the network driver.
commit 7ab9bdd47 recently modified the network driver so that, in most
cases, it properly resyncs each network's connection count during
libvirtd (or maybe virtnetworkd) restart by iterating through the
network's port list. This doesn't account for the case where a network
is destroyed and restarted while there are running domains that have
active ports on the network. In that case, the entire port list and
connection count for that network is lost, and now even a restart of
libvirtd/virtnetworkd/virtqemud, which in the past would resync the
connection count, doesn't help (the network driver thinks there are no
active ports, while the hypervisor driver knows about all the active
ports, but mistakenly believes that the network driver also knows).
The solution to this is to not just bypass valid portids during the
call to virDomainNetworkNotifyActualDevice(). Instead, we query the
network driver about the portid that was preserved in the domain
status, and if it is not registered, we register it.
(NB: while it would technically be correct to just generate a new
portid for these cases, it makes for less churn in portids (and thus
may make troubleshooting simpler) if we make the small fix to
virDomainNetDefActualToNetworkPort() that preserves existing valid
portids rather than unconditionally generating a new one.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
define a VIR_DEFINE_AUTOPTR_FUNC() to autofree virNetworkPortDefs, and
convert all uses of virNetworkPortDefPtr that are appropriate to use
it.
This coincidentally fixes multiple potential memory leaks (in failure
cases) in networkPortCreateXML()
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A virDomainNetDef object in a domain's nets array might contain a
virDomainHostdevDef, and when this is the case, the domain's hostdevs
array will also have a pointer to this embedded hostdev (this is done
so that internal functions that need to perform some operation on all
hostdevs won't leave out the type='hostdev' network interfaces).
When a network device was updated with virDomainUpdateDeviceFlags(),
we were replacing the entry in the nets array (and free'ing the
original) but forgetting about the pointer in the hostdevs array
(which would then point to the now-free'd hostdev contained in the old
net object.) This often resulted in a libvirtd crash.
The solution is to add a function, virDomainNetUpdate(), called by
qemuDomainUpdateDeviceConfig(), that updates the hostdevs array
appropriately along with the nets array.
Resolves: https://bugzilla.redhat.com/1558934
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The private data for video definition is created in
virDomainVideoDefNew() and we attempt to free it in
virDomainVideoDefFree(). This seems to work, except
the free function calls clear function which zeroes
out the whole structure and thus virObjectUnref()
which is called on private data does nothing.
2,568 bytes in 107 blocks are definitely lost in loss record 207 of 213
at 0x4A35476: calloc (vg_replace_malloc.c:752)
by 0x50A6048: virAllocVar (viralloc.c:346)
by 0x513CC5A: virObjectNew (virobject.c:243)
by 0x4DC1DEE: qemuDomainVideoPrivateNew (qemu_domain.c:1337)
by 0x51A6BD6: virDomainVideoDefNew (domain_conf.c:2831)
by 0x51B9F06: virDomainVideoDefParseXML (domain_conf.c:15541)
by 0x51CB761: virDomainDefParseXML (domain_conf.c:21158)
by 0x51C5973: virDomainDefParseNode (domain_conf.c:21708)
by 0x51C583A: virDomainDefParse (domain_conf.c:21663)
by 0x51C58AE: virDomainDefParseFile (domain_conf.c:21688)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In bc1e924cf0 we've introduced video driver name and whilst
doing so we've utilized VIR_ENUM_IMPL() macro. Then, in domain
XML parsing code the generated
virDomainVideoBackendTypeFromString() is called and its return
value is assigned directly to an unsigned int variable which is
wrong. Also, the video driver enum has 'default' value which is
not formatted into domain XML but is accepted during parsing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add qemuVhostUserFetchConfigs() to discover vhost-user helpers.
qemuVhostUserFillDomainGPU() will find the first matching GPU helper
with the required capabilities and set the associated
vhost_user_binary.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
vhost-user-gpu helper takes --render-node option to specify on which
GPU should the renderning be done.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Accept a new driver name attribute to specify usage of helper process, ex:
<video>
<driver name='vhostuser'/>
<model type='virtio'/>
</video>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When the bridge re-attach handling was moved out of the network driver
and into the hypervisor driver (commit b806a60e) as a part of the
refactor to split the network driver into a separate daemon, the check
was accidentally changed to only check for type='bridge'. The check for
type in this case needs to check for type='network' as well.
(at the time we thought that the two types could be conflated for
interface actual type, but this turned out to be too problematic to
do).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use VIR_AUTOPTR for temporary locals and get rid of the cleanup label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Refactor functions using these two object types together with
VIR_AUTOPTR.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Clean up functions which grab and free the context to use VIR_AUTOPTR.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use VIR_AUTO* helpers to get rid of the convoluted cleanup path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The wrapper reports libvirt errors for the libxml2 function so that
the same does not have to be repeated over and over.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
It needs to be used by a function that only has a const pointer to
virDomainNetDef.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virNetworkPortDef config stores the 'managed' attribute
as the virTristateBool type.
The virDomainDef config stores the 'managed' attribute as
the bool type.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If the hypervisor driver has not yet created the network port, the
portid field will be "00000000-0000-0000-0000-000000000000".
If a failure occurs during early VM startup, the hypervisor driver may
none the less try to release the network port, resulting in an
undesirable warning:
2019-09-12 13:17:42.349+0000: 16544: error :
virNetworkObjLookupPort:1679 : network port not found: Network port with
UUID 00000000-0000-0000-0000-000000000000 does not exist
By checking if the portid UUID is valid, we can avoid polluting the logs
in this way.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The function virDomainDefFormatInternal() has the predefined root name
"domain" to format the XML. But to save both active and inactive domain
in the snapshot XML, the new root name "inactiveDomain" was created.
So, the new function virDomainDefFormatInternalSetRootName() allows to
choose the root name of XML. The former function became a tiny wrapper
to call the new function setting the correct parameters.
Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The only caller for which this check makes sense is virDomainDefParse.
Thus the check should be moved there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Although <interface type='ethernet'> has always been able to use an
existing tap device, this is just a coincidence due to the fact that
the same ioctl is used to create a new tap device or get a handle to
an existing device.
Even then, once we have the handle to the device, we still insist on
doing extra setup to it (setting the MAC address and IFF_UP). That
*might* be okay if libvirtd is running as a privileged process, but if
libvirtd is running as an unprivileged user, those attempted
modifications to the tap device will fail (yes, even if the tap is set
to be owned by the user running libvirtd). We could avoid this if we
knew that the device already existed, but as stated above, an existing
device and new device are both accessed in the same manner, and
anyway, we need to preserve existing behavior for those who are
already using pre-existing devices with privileged libvirtd (and
allowing/expecting libvirt to configure the pre-existing device).
In order to cleanly support the idea of using a pre-existing and
pre-configured tap device, this patch introduces a new optional
attribute "managed" for the interface <target> element. This
attribute is only valid for <interface type='ethernet'> (since all
other interface types have mandatory config that doesn't apply in the
case where we expect the tap device to be setup before we
get it). The syntax would look something like this:
<interface type='ethernet'>
<target dev='mytap0' managed='no'/>
...
</interface>
This patch just adds managed to the grammar and parser for <target>,
but has no functionality behind it.
(NB: when managed='no' (the default when not specified is 'yes'), the
target dev is always a name explicitly provided, so we don't
auto-remove it from the config just because it starts with "vnet"
(VIR_NET_GENERATED_TAP_PREFIX); this makes it possible to use the
same pattern of names that libvirt itself uses when it automatically
creates the tap devices.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will simplify addition of another attribute to the <target> element
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
After parsing a video device with a model type of
VIR_DOMAIN_VIDEO_TYPE_NONE, all device info is cleared (see
virDomainDefPostParseVideo()) in order to avoid formatting any
auto-generated values for the XML. Subsequently, however, an alias is
generated for the video device (e.g. 'video0'), which results in an
alias property being formatted in the XML output anyway. This creates
confusion if the user has explicitly provided an alias for the video
device since the alias will change.
To avoid this, don't clear the user-defined alias for video devices of
type "none".
https://bugzilla.redhat.com/show_bug.cgi?id=1720612
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that virDomainXMLNamespace matches virXMLNamespace,
we no longer need to keep both around.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In the future we will perform more actions if ns.parse
is present. Decouple the condition from the actual call.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We do not need to pass the root node, since it's already
included in the XPathContext.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Neither the xmlDocPtr nor the root xmlNode (also passed
in the XPathContext) are interesting to the callees.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
resctrl object stored in def->resctrls is shared by cachetune and
memorytune. The domain xml configuration is parsed firstly for
cachetune then memorytune, and the resctrl object will not be created
in parsing settings for memorytune once it found sharing exists.
But resctrl is improperly freed when sharing happens.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Support 'Direct Mode' for Hyper-V Synthetic Timers in domain config.
Make it 'stimer' enlightenment option as it is not a separate thing.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The only code path which calls the parser with the
VIR_DOMAIN_DEF_PARSE_DISK_SOURCE is from qemuDomainBlockCopy. Since that
code path can properly handle backing chains for the disk and it's
desired to pass the parsed chains to the block copy code remove the
condition which prevents parsing the <backingStore> element.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU version 2.12.1 introduced a performance feature under commit
be7773268d98 ("target-i386: add KVM_HINTS_DEDICATED performance hint")
This patch adds a new KVM feature 'hint-dedicated' to set this performance
hint for KVM guests. The feature is off by default.
To enable this hint and have libvirt add "-cpu host,kvm-hint-dedicated=on"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description in conjunction with CPU mode='host-passthrough'.
<features>
<kvm>
<hint-dedicated state='on'/>
</kvm>
</features>
...
<cpu mode='host-passthrough ... />
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Redefining a domain via virDomainDefineXML should not give different results
based on an already existing definition.
Also, there's a crasher somewhere in the code:
https://bugzilla.redhat.com/show_bug.cgi?id=1739338
This reverts commit 94b3aa55f8
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Since its introduction in commit
8737578d11, the TPM version format is
"2.0" and not "2".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDeviceDefPostParse callback requires qemuCaps, we need
to make sure it gets the capabilities stored in the domain's private
data if the domain is running. Passing NULL may cause QEMU capabilities
probing to be triggered in case QEMU binary changed in the meantime.
When this happens while a running domain object is locked, QMP event
delivered to the domain before QEMU capabilities probing finishes will
deadlock the event loop.
QEMU capabilities lookup (via domainPostParseDataAlloc callback) is
hidden inside virDomainDeviceDefPostParseOne with no way to pass
qemuCaps to virDomainDeviceDef* functions. This patch fixes all
remaining paths leading to virDomainDeviceDefPostParse.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
Several general functions from domain_conf.c were lazily passing NULL as
the parseOpaque pointer instead of letting their callers pass the right
data. This patch fixes all paths leading to virDomainDefCopy to do the
right thing.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Current code doesn't allow us to add sub-features as we always print the
closing '/>'. As a preparatory change to implementing 'direct' sub-feature
for 'stimer' feature switch to printing closing tag individually.
No functional change.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Currently, the way we format PCI address is using printf-s
precision, e.g. "%.4x". This works if we don't want to print any
value outside of bounds (which is usually the case). However,
turns out, PCI domain can be 0x10000 which doesn't work well with
our format strings. However, if we change the format string to
"%04x" then we still pad small values with zeroes but also we are
able to print values that are larger than four digits. In fact,
this format string used by kernel to print a PCI address:
"%04x:%02x:%02x.%d"
The other three format strings (for bus, device and function) are
changed too, so that we use the same format string as kernel.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The format string for a PCI address is copied over and over
again, often with slight adjustments. Introduce global
VIR_PCI_DEVICE_ADDRESS_FMT macro that holds the formatting string
and use it wherever possible.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A new algorithm for detecting the vcpus and monitor type conflicts
between new monitor an existing allocation and monitor groups.
After refactoring, since we are verifying both @vcpus and monitor
type @tag at the same time, the validating function name has been
renamed from virDomainResctrlMonValidateVcpus to
virDomainResctrlValidateMonitor.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'virResctrlAllocIsEmpty' checks if cache allocation or memory
bandwidth allocation settings are specified in configuration
file. It is not proper to be used in checking memory bandwidth
allocation is specified in XML settings because this function
could not distinguish memory bandwidth allocations from cache
allocations.
Here using the local variable @n, which indicates the cache
allocation groups or memory bandwidth groups depending on the
context it is in, to decide if append a new @resctrl object.
If @n is zero and no monitors groups specified in XML, then
we should not append a new @resctrl object to @def->resctrls.
This kind of replacement is also more efficient and avoiding
a long function calling path.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Let 'virDomainResctrlVcpuMatch' to retrieve a pointer of
virDomainResctrlDefPtr in its third parameter instead
of virResctrlAllocPtr, if @vcpus is matched with the vcpus
of some resctrl allocation in list of @def->resctrls.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Creating object and judging if it is successfully created in fewer
lines.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
code cleanup for 'virDomainCachetuneDefParse' and
'virDomainMemorytuneDefParse'.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Wire up the use of a checkpoint list into each domain, similar to the
existing snapshot list. This includes adding a function for checking
that a redefine operation fits in with the existing list, as well as
various filtering capabilities over the list contents.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since swtpm does not support getting started without password
once it was created with encryption enabled, we don't allow
encryption to be removed. Similarly, we do not allow encryption
to be added once swtpm has run. We also prevent chaning the type
of the TPM backend since the encrypted state is still around and
the next time one was to switch back to the emulator backend
and forgot the encryption the TPM would not work.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Extend the TPM device XML parser and XML generator with emulator
state encryption support.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Pass an xmlopt argument through all the needed network conf
functions, like is done for domain XML handling. No functional
change for now
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Update schema and configuration to allow specifying new video type of
'bochs'. Add implementation and tests for qemu.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The function modifies the context but did not care to restore it back.
If a <seclabel> was used on a disk, the <privateData> would not be
parsed.
Use VIR_XPATH_NODE_AUTORESTORE and add a test case to validate that
everything works.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will allow enabling/disabling custom hypervisor
features for debugging/testing purposes via the qemu namespace.
Add a taint flag where we will flag such a domain so it's obvious what's
happening.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using 8 hex digits all the time, regardless of whether the
actual value can fit in fewer, makes it more obvious to the
user what the limits are.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Change the domain conf so invoke the new network port public APIs instead
of the network callbacks.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The portid will be the UUID of the virNetworkPort object associated
with the network interface when a guest is running.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current qemu driver code for changing bandwidth on a NIC first asks
the network driver if the change is supported, then changes the
bandwidth on the VIF, and then tells the network driver to update the
bandwidth on the bridge.
This is potentially racing if a parallel API call causes the network
driver to allocate bandwidth on the bridge between the check and the
update phases.
Change the code to just try to apply the network bridge update
immediately and rollback at the end if something failed.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Helper APIs are needed to
- Populate basic virNetworkPortDef from virDomainNetDef
- Set a virDomainActualNetDef from virNetworkPortDef
- Populate a full virNetworkPortDef from virDomainActualNetDef
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The domain conf actual network def stores a <class id='3'/> element
separately from the <bandwidth>. The class ID should really just be
an attribute on the <bandwidth> element. We can't change existing
XML, and this isn't visible to users since it is internal XML only.
When we expose the new network port XML to users though, we should
get the design right.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
SMMUv3 is an IOMMU implementation for ARM virt guests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Apart from virDomainDefValidate, virDomainDefPostParse is another
place where operating on info-less devices makes sense.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Rename the DOMAIN_DEVICE_ITERATE_GRAPHICS flag.
It was introduced by commit dd45c2710f
with the intention to run the Validate callback even on the graphics
device.
However, enumerating every single device in virDomainDeviceIterateFlags
is unsustainable and what really was special about the graphics device
was the lack of DeviceInfo.
Rename the flag and iterate over more info-less devices. (and leases)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Due to the way that our virObjectUnref() is written it's not
possible that a NULL is passed into *Dispose() function. However,
some functions check for that regardless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commits 4bc42986 and 218c81ea removed virDomainStorageSourceFormat on
the grounds that there were no external callers; however, the upcoming
backup code wants to output a <target> (push mode) or <scratch> (pull
mode) element that is in all other respects identical to a domain's
<source> element, where the previous virDomainStorageSourceFormat fit
the bill nicely. But rather than reverting the commits, it's easier to
just add an additional parameter for the element name to use, and
update all callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
This caused the live XML to report the 'bridge' type instead of the
'network' type, which is a behavioural regression.
It also breaks 'virsh domif-setlink', 'virsh update-device' and
'virsh domiftune'
This reverts commit 518026e159.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit f1d6585300.
Turns out, this caused a regression. There is this (perhaps less
known) semantic of virDomainAttachDevice() where if the device
the API is trying to attach is a CDROM/floppy that is already in
the domain the attach request is handled as 'change the media in
the drive'.
We have a better fix anyways.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
This function checks if given drive address is already present in
passed domain definition. Expose the function as it will be used
shortly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
During initial NIC setup the hypervisor drivers are responsible for
attaching the TAP device to the bridge device. Any fixup after libvirtd
restarts should thus also be their responsibility.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ports allocated on virtual networks with type=nat|route|open all get
given an actual type of 'network'.
Only ports in networks with type=bridge use an actual type of 'bridge'.
This distinction makes little sense since the virtualization drivers
will treat both actual types in exactly the same way, as they're all
just bridge devices a VM needs to be connected to.
This doesn't affect user visible XML since the "actual" device XML
is internal only, but we need code to convert the data upgrades.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNetDevBandwidthParse method uses the interface type to decide
whether to allow use of the "floor" parameter. Using the interface
type is not convenient as callers may not have that available, but
still wish to allow use of "floor". Switch to an explicit boolean
to control its usage.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
