Because it's a valid combination. p2p still uses a separate channel
for qemu migration, so there's value in letting the user specify a manual
migrate URI for overriding auto-port, or libvirt's FQDN lookup.
What _isn't_ allowed is --migrateuri and TUNNELLED, since there is
no separate migration channel. Disallow that instead
(cherry picked from commit 5e1de4fcdd)
Apps using libvirt will often have code like
if (virXXXX() < 0) {
virErrorPtr err = virGetLastError();
fprintf(stderr, "Something failed: %s\n",
err && err->message ? err->message :
"unknown error");
return -1;
}
Checking for a NULL error object or message leads to very
verbose code. A virGetLastErrorMessage() helper from libvirt
can simplify this to
if (virXXXX() < 0) {
fprintf(stderr, "Something failed: %s\n",
virGetLastErrorMessage());
return -1;
}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 69c6a58a1d)
If we are just ejecting media, ret == -1 even after the retry loop
determines that the tray is open, as requested. This means media
disconnect always report's error.
Fix it, and fix some other mini issues:
- Don't overwrite the 'eject' error message if the retry loop fails
- Move the retries decrement inside the loop, otherwise the final loop
might succeed, yet retries == 0 and we will raise error
- Setting ret = -1 in the disk->src check is unneeded
- Fix comment typos
cc: mprivozn@redhat.com
(cherry picked from commit 406d8a9809)
In 84c59ffa I've tried to fix changing ejectable media process. The
process should go like this:
1) we need to call 'eject' on the monitor
2) we should wait for 'DEVICE_TRAY_MOVED' event
3) now we can issue 'change' command
However, while waiting in step 2) the domain monitor was locked. So
even if qemu reported the desired event, the proper callback was not
called immediately. The monitor handling code needs to lock the
monitor in order to read the event. So that's the first lock we must
not hold while waiting. The second one is the domain lock. When
monitor handling code reads an event, the appropriate callback is
called then. The first thing that each callback does is locking the
corresponding domain as a domain or its device is about to change
state. So we need to unlock both monitor and VM lock. Well, holding
any lock while sleep()-ing is not the best thing to do anyway.
(cherry picked from commit 543af79a14)
qemu-img resize will fail with "The new size must be a multiple of 512"
if libvirt doesn't round it first.
This fixes rhbz#951495
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
(cherry picked from commit 9a8f39d097)
This patch is in relation to Bug 966449:
https://bugzilla.redhat.com/show_bug.cgi?id=966449
This is a patch addressing the coredump.
Thread 1 must be calling nwfilterDriverRemoveDBusMatches(). It does so with
nwfilterDriverLock held. In the patch below I am now moving the
nwfilterDriverLock(driverState) further up so that the initialization, which
seems to either take a long time or is entirely stuck, occurs with the lock
held and the shutdown cannot occur at the same time.
Remove the lock in virNWFilterDriverIsWatchingFirewallD to avoid
double-locking.
(cherry picked from commit 0ec376c20a)
Commit 894f784948 broke the v1.0.5-maint
branch because VIR_STRDUP() didn't exist in the v1.0.5 release so the
resulting build is missing that symbol.
This patch is only for the v1.0.5-maint branch.
Commit 7f15ebc7a2 introduced a bug
happening when guests without a <graphics> element are migrated.
The initialization of listenAddress happens unconditionally
from the cookie even if the cookie->graphics pointer was NULL.
Moved the initialization to where it is safe.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
(cherry picked from commit 9684bb11fd)
This should resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=959191
The problem was that qemuUpdateActivePciHostdevs was returning 0
(success) when no hostdevs were present, but would otherwise return -1
(failure) even when it completed successfully. It is only called from
qemuProcessReconnect(), and when qemuProcessReconnect got back an
error, it would not only stop reconnecting, but would terminate the
guest qemu process "to remove danger of it ending up running twice if
user tries to start it again later".
(This bug was introduced in commit 011cf7ad, which was pushed between
v1.0.2 and v1.0.3, so all maintenance branches from v1.0.3 up to 1.0.5
will need this one line patch applied.)
(cherry picked from commit 2ea45647bc)
A literal IPv6 must be escaped, otherwise migration fails with:
unable to execute QEMU command 'drive-mirror': address resolution failed
for f0::0d:5901: Servname not supported for ai_socktype
since QEMU treats everything after the first ':' as the port.
(cherry picked from commit 2136327e23)
gcc 4.1.2 (hello, RHEL 5!) fails to build on 32-bit platforms with:
conf/domain_conf.c: In function 'virDomainDefParseXML':
conf/domain_conf.c:10581: warning: integer constant is too large for 'long' type
Problem introduced in commit f8e3221f9.
* src/conf/domain_conf.c (virDomainDefParseXML): Mark large constants.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit f6817c70b4)
Since f03dcc5 we use [::] as the listening address both on qemu
command line in -incoming and in nbd-server-start QMP command.
However the latter requires just :: without the braces.
(cherry picked from commit 2326006410)
https://bugzilla.redhat.com/show_bug.cgi?id=965169 documents a
problem starting domains when cgroups are enabled; I was able
to reliably reproduce the race about 5% of the time when I added
hooks to domain startup by 3 seconds (as that seemed to be about
the length of time that qemu created and then closed a temporary
thread, probably related to aio handling of initially opening
a disk image). The problem has existed since we introduced
virCgroupMoveTask in commit 9102829 (v0.10.0).
There are some inherent TOCTTOU races when moving tasks between
kernel cgroups, precisely because threads can be created or
completed in the window between when we read a thread id from the
source and when we write to the destination. As the goal of
virCgroupMoveTask is merely to move ALL tasks into the new
cgroup, it is sufficient to iterate until no more threads are
being created in the old group, and ignoring any threads that
die before we can move them.
It would be nicer to start the threads in the right cgroup to
begin with, but by default, all child threads are created in
the same cgroup as their parent, and we don't want vcpu child
threads in the emulator cgroup, so I don't see any good way
of avoiding the move. It would also be nice if the kernel were
to implement something like rename() as a way to atomically move
a group of threads from one cgroup to another, instead of forcing
a window where we have to read and parse the source, then format
and write back into the destination.
* src/util/vircgroup.c (virCgroupAddTaskStrController): Ignore
ESRCH, because a thread ended between read and write attempts.
(virCgroupMoveTask): Loop until all threads have moved.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 83e4c77547)
'make check' fails since commit 470d5c46 on any system with dash
as /bin/sh, because '<<<' is a bash extension. For example:
nwfilterschematest: 23: /home/eblake/libvirt/tests/schematestutils.sh: Syntax error: redirection unexpected
Also, there is no need to spawn a grep process when shell globbing
can do the same.
* tests/schematestutils.sh: Replace bashism and subprocess with a
faster and portable construct.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 1d21b884a3)
Commit 632f78c introduced a regression which causes schedinfo being
unable to set some parameters. When migrating to priv->cgroup there
was missing variable left out and due to passed NULL to underlying
function, the setting failed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=963592
CVE-2013-1962
remoteDispatchStoragePoolListAllVolumes wasn't freeing the pool.
The pool also held a reference to the connection, preventing it from
getting freed and closing the netcf interface driver, which held two
sockets open.
(cherry picked from commit ca697e90d5)
bz #960879
In b2878ed860 we added the O_NOCTTY
flag when opening files in the stream code. Unfortunately a later
piece of code was comparing the flags == O_RDONLY, without masking
out the non-access mode flags. This broke the iohelper when used
with streams for read, since it caused us to attach the stream
output pipe to the stream input FD instead of output FD :-(
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit a2214c5257)
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=851411https://bugzilla.redhat.com/show_bug.cgi?id=955500
The first problem was that virFileOpenAs was returning fd (-1) in one
of the error cases rather than ret (-errno), so the caller thought
that the error was EPERM rather than ENOENT.
The second problem was that some log messages in the general purpose
qemuOpenFile() function would always say "Failed to create" even if
the caller hadn't included O_CREAT (i.e. they were trying to open an
existing file).
This fixes virFileOpenAs to jump down to the error return (which
returns ret instead of fd) in the previously mentioned incorrect
failure case of virFileOpenAs(), removes all error logging from
virFileOpenAs() (since the callers report it), and modifies
qemuOpenFile to appropriately use "open" or "create" in its log
messages.
NB: I seriously considered removing logging from all callers of
virFileOpenAs(), but there is at least one case where the caller
doesn't want virFileOpenAs() to log any errors, because it's just
going to try again (qemuOpenFile()). We can't simply make a silent
variation of virFileOpenAs() though, because qemuOpenFile() can't make
the decision about whether or not it wants to retry until after
virFileOpenAs() has already returned an error code.
Likewise, I also considered changing virFileOpenAs() to return -1 with
errno set on return, and may still do that, but only as a separate
patch, as it obscures the intent of this patch too much.
(cherry picked from commit a2c1bedbd8)
Print an error instead of crashing when a TPM device without
a backend is specified.
Add a test for tpm device with no backend, which should fail
with a parse error.
https://bugzilla.redhat.com/show_bug.cgi?id=961252
(cherry picked from commit 1d96440a06)
Currently, using an invalid XML in tests fails, because
the schema test expects all of them to be valid.
Treat files with -invalid.xml suffix as invalid and expect
them to fail validation.
(cherry picked from commit 470d5c4654)
VFIO device assignment requires a cgroup ACL to be setup for access to
the /dev/vfio/nn "group" device for any devices that will be assigned
to a guest. In the case of a host device that is allocated from a
pool, it was being allocated during qemuBuildCommandLine(), which is
called by qemuProcessStart() *after* the all-encompassing
qemuSetupCgroup() was called, meaning that the standard Cgroup ACL
setup wasn't creating ACLs for these devices allocated from pools.
One possible solution was to manually add a single ACL down inside
qemuBuildCommandLine() when networkAllocateActualDevice() is called,
but that has two problems: 1) the function that adds the cgroup ACL
requires a virDomainObjPtr, which isn't available in
qemuBuildCommandLine(), and 2) we really shouldn't be doing network
device setup inside qemuBuildCommandLine() anyway.
Instead, I've created a new function called
qemuNetworkPrepareDevices() which is called just before
qemuPrepareHostDevices() during qemuProcessStart() (explanation of
ordering in the comments), i.e. well before the call to
qemuSetupCgroup(). To minimize code churn in a patch that will be
backported to 1.0.5-maint, qemuNetworkPrepareDevices only does
networkAllocateActualDevice() and the bare amount of setup required
for type='hostdev network devices, but it eventually should do *all*
device setup for guest network devices.
Note that some of the code that was previously needed in
qemuBuildCommandLine() is no longer required when
networkAllocateActualDevice() is called earlier:
* qemuAssignDeviceHostdevAlias() is already done further down in
qemuProcessStart().
* qemuPrepareHostdevPCIDevices() is called by
qemuPrepareHostDevices() which is called after
qemuNetworkPrepareDevices() in qemuProcessStart().
As hinted above, this new function should be moved into a separate
qemu_network.c (or similarly named) file along with
qemuPhysIfaceConnect(), qemuNetworkIfaceConnect(), and
qemuOpenVhostNet(), and expanded to call those functions as well, then
the nnets loop in qemuBuildCommandLine() should be reduced to only
build the commandline string (which itself can be in a separate
qemuInterfaceBuilldCommandLine() function as suggested by
Michal). However, this will require storing away an array of tapfd and
vhostfd that are needed for the commandline, so I would rather do that
in a separate patch and leave this patch at the minimum to fix the
bug.
(cherry picked from commit 8cd40e7e0d)
In the non linux case some callers like gather_scsi_host_caps needed the
return code of -1 while others like update_caps needed an empty
statement (to avoid a "statement without effect" warning). This is much
simpler solved by using a function instead of a define.
(cherry picked from commit 58662f4416)
The lockd plugin for the lock manager was not correctly
handling the release of resource locks. This meant that
during migration, or when pausing a VM, the locks would
not get released. This in turn made it impossible to
resume the domain, or finish migration
(cherry picked from commit 8dc93ffadc)
POSIX says pthread_t is opaque. We can't guarantee if it is scaler
or a pointer, nor what size it is; and BSD differs from Linux.
We've also had reports of gcc complaining on attempts to cast it,
if we use a cast to the wrong type (for example, pointers have to be
cast to void* or intptr_t before being narrowed; while casting a
function return of scalar pthread_t to void* triggers a different
warning).
Give up on casts, and use unions to get at decent bits instead. And
rather than futz around with figuring which 32 bits of a potentially
64-bit pointer are most likely to be unique, convert the rest of
the code base to use 64-bit values when using a debug id.
Based on a report by Guido Günther against kFreeBSD, but with a
fix that doesn't regress commit 4d970fd29 for FreeBSD.
* src/util/virthreadpthread.c (virThreadSelfID, virThreadID): Use
union to get at a decent bit representation of thread_t bits.
* src/util/virthread.h (virThreadSelfID, virThreadID): Alter
signature.
* src/util/virthreadwin32.c (virThreadSelfID, virThreadID):
Likewise.
* src/qemu/qemu_domain.h (qemuDomainJobObj): Alter type of owner.
* src/qemu/qemu_domain.c (qemuDomainObjTransferJob)
(qemuDomainObjSetJobPhase, qemuDomainObjReleaseAsyncJob)
(qemuDomainObjBeginNestedJob, qemuDomainObjBeginJobInternal): Fix
clients.
* src/util/virlog.c (virLogFormatString): Likewise.
* src/util/vireventpoll.c (virEventPollInterruptLocked):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 22d12905e6)
If an early dispatch check caused a jump to the 'cleanup' branch
then virTypeParamsFree() would be called with an uninitialized
'nparams' variable. Fortunately 'params' is initialized to NULL,
so the uninitialized 'nparams' variable would not be used.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 31dbbb667f)
Commit 776d49f4 added a static function that is only called
conditionally; leading to this compile error on mingw:
CC libvirt_util_la-virprocess.lo
../../src/util/virprocess.c:624:26: error: 'struct rlimit' declared inside parameter list [-Werror]
../../src/util/virprocess.c:624:26: error: its scope is only this definition or declaration, which is probably not what you want [-Werror]
../../src/util/virprocess.c:622:1: error: 'virProcessPrLimit' defined but not used [-Werror=unused-function]
* src/util/virprocess.c (virProcessPrLimit): Only declare
virProcessPrLimit when used.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 05f79a3894)
The F_DUPFD_CLOEXEC operation with fcntl() expects a single
int argument, specifying the minimum FD number for the newly
dup'd file descriptor. We were not specifying that causing
random stack data to be accessed as the FD number. Sometimes
that worked, sometimes it didn't.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit d6670a64e1)
https://bugzilla.redhat.com/show_bug.cgi?id=924501 tracks a
problem that occurs if uid 107 is already in use at the time
libvirt is first installed. In response that problem, Fedora
packaging guidelines were recently updated. This fixes the
spec file to comply with the new guidelines:
https://fedoraproject.org/wiki/Packaging:UsersAndGroups
* libvirt.spec.in (daemon): Follow updated Fedora guidelines.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit a2584d58f6)
On a mingw build, 'make distcheck' fails with:
GEN libvirt_qemu.def
make[3]: *** No rule to make target `../../src/libvirt_lxc.syms', needed by `libvirt_lxc.def'. Stop.
I traced it to a missing entry in EXTRA_DIST. But rather than keep
the entire list in sync, it is easier to list the three syms files
that drive .so files directly, and then reuse existing makefile
variables for the remaining files (that is, I validated that all
remaining files are added to SYM_FILES, possibly via USED_SYM_FILES,
according to makefile conditionals).
Problem introduced in commit 3d1596b (v1.0.2).
* src/Makefile.am (EXTRA_DIST): Ensure all syms files are shipped.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit ed11ab93fa)
I must have looked at this a couple dozen times before I noticed it
had "!=" instead of "==". Not doing this setup prevented qemu from
doing anything with the vfio group device.
(cherry picked from commit 52ba0f6e1c)
The libvirt 1.0.5 tarball is missing a file which renders 'make
check' broken; first reported on list by Guido Günther.
* python/Makefile.am (EXTRA_DIST): Hoist sanitytest.py out of
HAVE_PYTHON conditional.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 5a3487dadb)
This should resolve https://bugzilla.redhat.com/show_bug.cgi?id=958907
Recent new addition of code to read/write active network state to the
NETWORK_STATE_DIR in the network driver broke startup for
qemu:///session. The network driver had several state file paths
hardcoded to /var, which could never possibly work in session mode.
This patch modifies *all* state files to use a variable string that is
set differently according to whether or not we're running
privileged. (It turns out that logDir was never used, so it's been
completely eliminated.)
There are very definitely other problems preventing dnsmasq and radvd
from running in non-privileged mode, but it's more consistent to have
the directories used by them be determined in the same fashion.
NB: I've noted before that the network driver is storing its state
(including dnsmasq and radvd state) in /var/lib, while qemu stores its
state in /var/run. It would probably have been better if the two
matched, but it's been this way for a long time, and changing it would
break running installations during an upgrade, so it's best to just
leave it as it is.
(cherry picked from commit 2ffd87d820)
Conflicts:
src/network/bridge_driver.c - code removed by this patch had
been modified upstream.
virPCIDeviceReattach and virPCIDeviceUnbindFromStub (called by
virPCIDeviceReattach) had previously required the name of the stub
driver as input. This is unnecessary, because the name of the driver
the device is currently bound to can be found by looking at the link:
/sys/bus/pci/dddd:bb:ss.ff/driver
Instead of requiring that the name of the expected stub driver name
and only unbinding if that one name is matched, we no longer take a
driver name in the arglist for either of these
functions. virPCIDeviceUnbindFromStub just compares the name of the
currently bound driver to a list of "well known" stubs (right now
contains "pci-stub" and "vfio-pci" for qemu, and "pciback" for xen),
and only performs the unbind if it's one of those devices.
This allows virsh nodedevice-reattach to work properly across a
libvirtd restart, and fixes a couple of cases where we were
erroneously still hard-coding "pci-stub" as the drive name.
For some unknown reason, virPCIDeviceReattach had been calling
modprobe on the stub driver prior to unbinding the device. This was
problematic because we no longer know the name of the stub driver in
that function. However, it is pointless to probe for the stub driver
at that time anyway - because the device is bound to the stub driver,
we are guaranteed that it is already loaded, and so that call to
modprobe has been removed.
Conditional BuildRequires: should be at the top level, rather
than appearing in conditional sub-package sections. This
appears to be the only offender.
* libvirt.spec.in (BuildRequires): Move libblkid-devel into
correct area.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit cc6d19f3 added text containing "<code>snapshot<code>" to
formatsnapshot.html.in. The closing tag is missing '/' which causes
the documentation to misrender.
Python code generator "generate_source" section that handles
code generation to "free" inherited objects needs to generate
DISPATCH_FREE calls for all extended_by objects.
For s390 we don't want to have a default USB device generated even
if QEMU is silently tolerating -usb on the command line. This may change
in the future.
Another reason to avoid the USB controller is that it implies a PCI
bus which might cause a regression at some later point in time.
The following change will set the USB controller model to 'none'
unless a model or address has been specified, which can be the case
if a legacy definition is loaded or the XML writer knows what
she/he's doing.
Requiring the user to explicitly disable USB on systems not supporting
it seems cumbersome.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
