When running libvirt from the build directory with the 'run' script, it
will run as unconfined_t. This can result in unexpected behavior when
selinux is enforcing due to the fact that the selinux policies are
written assuming that libvirt is running with the
system_u:system_r:virtd_t context. This patch adds a new --selinux
option to the run script. When this option is specified, it will launch
the specified binary using the 'runcon' utility to set its selinux
context to the one mentioned above. Since this may require root
privileges, setting the selinux context is not the default behavior and
must be enabled with the command line switch.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Since its introduction in 4d1b771fbb
it has only been used to differentiate between START and non-START.
Last use of QEMU_DOMAIN_LOG_CONTEXT_MODE_ATTACH was removed by:
commit f709377301
qemu: Fix qemuDomainObjTaint with virtlogd
QEMU_DOMAIN_LOG_CONTEXT_MODE_STOP is unused since:
commit cf3ea0769c
qemu: process: Append the "shutting down" message using the new APIs
Now, the only caller passes QEMU_DOMAIN_LOG_CONTEXT_MODE_START.
Assume that's always the case and remove the 'mode' argument.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that the support to revert external snapshots is implemented we can
drop this check.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
With the introduction of external snapshot revert support we need to
error out in some cases when trying to delete some snapshots.
If users reverts to non-leaf snapshots and would try to delete it after
the revert is done it would not work currently as this operation would
require using block-stream which is not implemented for now as in this
case the snapshot has two children so the disk files have multiple
overlays.
Similarly if user reverts to non-leaf snapshot and would try to delete
snapshot that is non-leaf but not in currently active snapshot chain we
would still need to use block-commit operation. The issue here is that
in order to do that we would have to start new qemu process with
different domain definition than what is currently used by the domain.
If the current domain would be running it would complicate things even
more so this operation is not yet supported.
If user creates new snapshot after reverting to non-leaf snapshot it
creates a new branch. Deleting snapshot with multiple children will
require block-stream which is not implemented for now.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There will be more external snapshot checks introduced by following
patch so group them together.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
With introduction of external snapshot revert we will have to update
backing store of qcow images not actively used be QEMU manually.
The need for this patch comes from the fact that we stop and start QEMU
process therefore after revert not all existing snapshots will be known
to that QEMU process due to reverting to non-leaf snapshot or having
multiple branches.
We need to loop over all existing snapshots and check all disks to see
if they happen to have the image we are deleting as backing store and
update them to point to the new image except for images currently used
by the running QEMU process doing the merge operation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We only need the domain definition from domain object. This will allow
us to use it from snapshot code where we need to pass different domain
definition.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This new helper will allow us to check if we are able to delete external
snapshot after user did revert to non-leaf snapshot.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When user creates a new snapshot after reverting to non-leaf snapshot we
no longer need to store the temporary overlays as they will be part of
the VM XMLs stored in the newly created snapshot.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When deleting external snapshot and parent snapshot is the currently
active snapshot as user reverted to it we need to properly update the
parent snapshot metadata.
After the delete is done the new overlay files will be the currently
used files created when snapshot revert was done, replacing the original
overlay files.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When block commit is not needed we can just simply unlink the
disk files.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In this case there is no need to run block commit and using qemu process
at all.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Before external snapshot revert every delete operation did block commit
in order to delete a snapshot. But now when user reverts to non-leaf
snapshot deleting leaf snapshot will not have any overlay files so we
can just simply delete the snapshot images.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This part of code is about to grow to make deletion work when user
reverts to non-leaf snapshot.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The new name reflects that we prepare data for external snapshot
deletion and the old name will be used later for different part of code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When reverting to external snapshot we need to create new overlay qcow2
files from the disk files the VM had when the snapshot was taken.
There are some specifics and limitations when reverting to a snapshot:
1) When reverting to last snapshot we need to first create new overlay
files before we can safely delete the old overlay files in case the
creation fails so we have still recovery option when we error out.
These new files will not have the suffix as when the snapshot was
created as renaming the original files in order to use the same file
names as when the snapshot was created would add unnecessary
complexity to the code.
2) When reverting to any snapshot we will always create overlay files
for every disk the VM had when the snapshot was done. Otherwise we
would have to figure out if there is any other qcow2 image already
using any of the VM disks as backing store and that itself might be
extremely complex and in some cases impossible.
3) When reverting from any state the current overlay files will be
always removed as that VM state is not meant to be saved. It's the
same as with internal snapshots. If user want's to keep the current
state before reverting they need to create a new snapshot. For now
this will only work if the current snapshot is the last.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Both creating and deleting snapshot are using VIR_ASYNC_JOB_SNAPSHOT but
reverting is using VIR_ASYNC_JOB_START. Let's unify it to make it
consistent for all snapshot operations.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We will need to reuse the functionality when reverting external
snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
To create new overlay files when external snapshot revert support is
introduced we will be using different domain definition than what is
currently used by the domain.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extract creation of qcow2 files for external snapshots to separate
function as we will need it for external snapshot revert code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When creating external snapshot this function is called only when the VM
is not running so there is only one definition to care about. However,
it will be used by external snapshot revert code for active and inactive
definition and they may be different if a disk was (un)plugged only for
the active or inactive definition.
The current code would crash so use virDomainDiskByName() to get the
correct disk from the domain definition based on the disk name and make
sure it exists.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extract the code that updates disks in domain definition while creating
external snapshots. We will use it later in the external snapshot revert
code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This new option will be used by external snapshot revert code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This new element will hold the new disk overlay created when reverting
to non-leaf snapshot in order to remember the files libvirt created.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit <ef3f3884a2432958bdd4ea0ce45509d47a91a453> introduced new
argument for virDomainSnapshotAlignDisks() that allows passing alternate
domain definition in case the snapshot parent.dom is NULL.
In case of redefining snapshot it will not hit the part of code that
unconditionally uses parent.dom as there will not be need to generate
default external file names.
It should be still fixed to make it safe. Future external snapshot
revert code will use this to generate default file names and in this
case it would crash.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We will need to call this function from qemu_snapshot when introducing
external snapshot revert support.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We will need to call this function from qemu_snapshot when introducing
external snapshot revert support.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Convert all cases using DO_TEST() to use DO_TEST_CAPS_LATEST() and
remove DO_TEST() to prevent further use.
Most of the changes are related to CPU being present in the output XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all tests using fake capabilities to use DO_TEST_CAPS_LATEST.
Note that rename detection in git didn't work too well here and the
files may not correspond.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu removed the support for the old 'ivshmem' device in 4.0 release.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The device was removed in qemu-4.0 and is superseded by 'ivshmem-plain'
and 'ivshmem-doorbell'.
Always report error when the old version is used and drop the irrelevant
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upgrade the relevant test cases to use latest capabilities. Note that
the 'shmem' (ivshmem) device is no longer supported and will be dropped
later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically we've used QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS as witness
that the topology must cover the maximum number ov vcpus. qemu started
to enforce this in qemu-2.5, thus we can now always do the check.
This change also requires aligning the topology in certain test files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Finish the conversion of cases which didn't need any special
capabilities to use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Version-lock the test to qemu-5.0.0 as it's the latest qemu that
supports 'vxhs' and thus the test can't use 'latest'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The output files from 'qemuxml2argvtest' may have the real capability
suffix e.g. 'pci-rom-disabled-invalid.x86_64-latest.xml' which would not
be detected as being invalid and thus causing a test failure.
Change the logic to find '-invalid.' so that we can properly use
'virschematest' with test cases using real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'disk-cdrom-empty-network-invalid' is a special case were the input
XML is invalid according to the schema, but after processing a valid XML
is produced.
This corner case doesn't play well with 'virschematest' which uses the
file suffix to determine whether the file is invalid.
Upcoming patch will change the 'virschematest' condition, which would
start detecting this XML as invalid.
Use the '-active'/'-inactive' suffix for the file, which is possible
with qemuxml2xmltest so that an upcoming patch will not cause test
failure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all tests using the 'DO_TEST_NOCAPS' "fake" capability
invocation to use DO_TEST_CAPS_LATEST and remove the DO_TEST_NOCAPS
macro to prevent further use.
Most of the output file changes are related to default USB controller
type and the CPU becoming defined in the XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are no more tests depending on '/usr/bin/qemu-system-i386' thus we
don't have to carry the data any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the rest of the files using 'qemu-system-i386' to
'qemu-system-x86_64'. The 'cpu*' tests are done separately to emphasise
that there's no change in the output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert tests which use DO_TEST_NOCAPS in both tests and the
qemuxml2xml variant has a symlink back to the qemuxml2argv input file.
This is done to separate the conversion before a patch converts all
DO_TEST_NOCAPS variants in qemuxml2xmltest to use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the emulator and architecture to x86_64, for all non-cpu related
test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At this point we setup the master key with all VMs, so this specific
test case no longer makes sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
