Use auto free to avoid leaking the "trustGuestRxFilters" strings
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Change the domain conf so invoke the new network port public APIs instead
of the network callbacks.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The portid will be the UUID of the virNetworkPort object associated
with the network interface when a guest is running.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNetworkObjPtr state will need to maintain a record of all
virNetworkPortDefPtr objects associated with the network. Record these
in a hash and add APIs for manipulating them.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current qemu driver code for changing bandwidth on a NIC first asks
the network driver if the change is supported, then changes the
bandwidth on the VIF, and then tells the network driver to update the
bandwidth on the bridge.
This is potentially racing if a parallel API call causes the network
driver to allocate bandwidth on the bridge between the check and the
update phases.
Change the code to just try to apply the network bridge update
immediately and rollback at the end if something failed.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Helper APIs are needed to
- Populate basic virNetworkPortDef from virDomainNetDef
- Set a virDomainActualNetDef from virNetworkPortDef
- Populate a full virNetworkPortDef from virDomainActualNetDef
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a virNetworkPortDefPtr struct to represent the data associated
with a virtual network port. Add APIs for parsing/formatting XML docs
with the data.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The domain conf actual network def stores a <class id='3'/> element
separately from the <bandwidth>. The class ID should really just be
an attribute on the <bandwidth> element. We can't change existing
XML, and this isn't visible to users since it is internal XML only.
When we expose the new network port XML to users though, we should
get the design right.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Due to this bug the following command would fail on any host where TSC
frequency can be probed:
$ virsh capabilities | virsh cpu-baseline /dev/stdin
error: unsupported configuration: Invalid TSC frequency
https://bugzilla.redhat.com/show_bug.cgi?id=1641702
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's a premature optimization. It's perfectly acceptable for
'error' label to deal with @vm == NULL case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
This patch adds a new
<counter name='tsc' frequency='N' scaling='on|off'/>
element into the host CPU capabilities XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
SMMUv3 is an IOMMU implementation for ARM virt guests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Apart from virDomainDefValidate, virDomainDefPostParse is another
place where operating on info-less devices makes sense.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Rename the DOMAIN_DEVICE_ITERATE_GRAPHICS flag.
It was introduced by commit dd45c2710f6fd2d4f8a47f97960532d0e0091e7d
with the intention to run the Validate callback even on the graphics
device.
However, enumerating every single device in virDomainDeviceIterateFlags
is unsustainable and what really was special about the graphics device
was the lack of DeviceInfo.
Rename the flag and iterate over more info-less devices. (and leases)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Due to the way that our virObjectUnref() is written it's not
possible that a NULL is passed into *Dispose() function. However,
some functions check for that regardless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If virStoragePoolObjNew() fails to create new volume object list
then virObjectUnref() is called and since refcounter is 1 then
virStoragePoolObjDispose() is called which in turn calls
virStoragePoolObjClearVols() which in turn dereferences
obj->volumes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This brings about a couple of benefits:
- use of VIR_AUTOUNREF() simplifies several callers
- Fixes a todo about virDomainMomentObjList not being polymorphic enough
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
In preparation for making virDomainSnapshotDef a descendant of
virObject, it is time to fix all callers that allocate an object to
use virDomainSnapshotDefNew() instead of VIR_ALLOC(). Fortunately,
there aren't very many :)
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
VIR_CLASS_NEW insists that descendents of virObject have 'parent' as
the name of their inherited base class member at offset 0. While it
would be possible to write a new class-creation macro that takes the
actual field name 'current', and rewrite VIR_CLASS_NEW to call the new
macro with the hard-coded name 'parent', it seems less confusing if
all object code uses similar naming. Thus, this is a mechanical rename
in preparation of making virDomainSnapshotDef a descendent of
virObject.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
VIR_CLASS_NEW insists that descendents of virObject have 'parent' as
the name of their inherited base class member at offset 0. While it
would be possible to write a new class-creation macro that takes the
actual field name, and rewrite VIR_CLASS_NEW to call the new macro
with the hard-coded name 'parent', so that we could make
virDomainMomentDef use a custom name for its base class, it seems less
confusing if all object code uses similar naming. Thus, this is a
mechanical rename in preparation of making virDomainSnapshotDef a
descendent of virObject, when we can no longer use 'parent' for a
different purpose than the base class.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Commits 4bc42986 and 218c81ea removed virDomainStorageSourceFormat on
the grounds that there were no external callers; however, the upcoming
backup code wants to output a <target> (push mode) or <scratch> (pull
mode) element that is in all other respects identical to a domain's
<source> element, where the previous virDomainStorageSourceFormat fit
the bill nicely. But rather than reverting the commits, it's easier to
just add an additional parameter for the element name to use, and
update all callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
This caused the live XML to report the 'bridge' type instead of the
'network' type, which is a behavioural regression.
It also breaks 'virsh domif-setlink', 'virsh update-device' and
'virsh domiftune'
This reverts commit 518026e15959ab0e19b659a9f2ff502a54946498.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Different check values are not ABI compatible. For example
if on migration we change 'full' to 'partial' then guest cpu
on destination can be different.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
This reverts commit f1d6585300001c7b23b8796a0faa4411c3531996.
Turns out, this caused a regression. There is this (perhaps less
known) semantic of virDomainAttachDevice() where if the device
the API is trying to attach is a CDROM/floppy that is already in
the domain the attach request is handled as 'change the media in
the drive'.
We have a better fix anyways.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
This function checks if given drive address is already present in
passed domain definition. Expose the function as it will be used
shortly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
During initial NIC setup the hypervisor drivers are responsible for
attaching the TAP device to the bridge device. Any fixup after libvirtd
restarts should thus also be their responsibility.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ports allocated on virtual networks with type=nat|route|open all get
given an actual type of 'network'.
Only ports in networks with type=bridge use an actual type of 'bridge'.
This distinction makes little sense since the virtualization drivers
will treat both actual types in exactly the same way, as they're all
just bridge devices a VM needs to be connected to.
This doesn't affect user visible XML since the "actual" device XML
is internal only, but we need code to convert the data upgrades.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virNetDevBandwidthParse method uses the interface type to decide
whether to allow use of the "floor" parameter. Using the interface
type is not convenient as callers may not have that available, but
still wish to allow use of "floor". Switch to an explicit boolean
to control its usage.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Wire up the accessor functions necessary for the testsuite to install
an alternative post-parse handler from normal drivers. I could have
modified the signature for virDomainXMLOptionNew() to take another
parameter, but thought it was easier to add a new set function rather
than chase down all existing callers. Until code actually sets the
override, there is no change in behavior.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Move the non-deterministic code that sets snapshot properties
independently of what the incoming XML described to instead live in a
default post-parse function common to virDomainMoment (as checkpoints
will also reuse it in later patches). This patch is just code motion,
with no difference to any callers; but the next patch will further
refactor things to allow for a per-driver override, used by the
testsuite to perform deterministic post-parse actions for better
coverage of parser/formatter code.
Note that the post-parse code is intentionally not run during a
snapshot redefine, since that code path already requires a valid
snapshot name and creation time from the XML.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
None of the existing drivers actually use the 0-valued 'nostate'
snapshot state; rather, it was a fluke of implementation. In fact,
some drivers, like qemu, actively reject 'nostate' as invalid during a
snapshot redefine. Normally, a driver computes the state post-parse
from the current domain, and thus virDomainSnapshotGetXMLDesc() will
never expose the state. However, since the testsuite lacks any
associated domain to copy state from, and lacks post-parse processing
that normal drivers have, the testsuite output had several spots with
the state, coupled with a regex filter to ignore the oddity.
It is better to follow the lead of other XML defaults, by not
outputting anything during format if post-parse defaults have not been
applied, and rejecting the default value during parsing. The testsuite
needs a bit of an update, by adding another flag for when to simulate
a post-parse action of setting a snapshot state, but none of the
drivers are impacted other than rejecting XML that was previously
already suspicious in nature.
Similarly, don't expose creation time 0 (for now, only possible if a
user redefined a snapshot to claim creation at the Epoch, but also
happens once setting the creation time is deferred to a post-parse
handler).
This is also a step towards cleaning up snapshot_conf.c to separate
its existing post-parse work (namely, setting the creationTime and
default snapshot name) from the pure parsing work, so that we can get
rid of the testsuite hack of regex filtering of the XML and instead
have more accurate testing of our parser/formatter code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This requires drivers to opt in to handle the raw modelstr
network model, all others will error if a passed in XML value
is not in the model enum.
Enable this feature for libxl/xen/xm and qemu drivers
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Convert the vbox driver to net model enum, which requires adding
enum values for Am79C970A, Am79C973, 82540EM, 82545EM, 82543GC. We
preserve the same casing that vbox historically used for these model
names.
Remove the now unused virDomainNetStrcaseeqModelString
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Convert the vmware/vmx driver to net model enum, which requires
adding enum values for vlance, vmxnet, vmxnet2, and vmxnet3.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
vbox and vmx drivers do net case insensitive net model comparisons,
so for example 'VMXNET3' and 'vmxnet3' and 'VmxNeT3' in the XML will
translate to the same driver configuration. To convert these drivers
to use net model enum, we will need to do case insensitive comparisons
as well.
Essentially we implement virEnumToString, but with case insensitive
comparison. XML will always be formatted with the enum model string
we track internally, but we will accept any case insensitive variant.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This converts the qemu driver to the net model enum, for all
the model values that we have hardcoded for various checks,
which adds e1000e, virtio-transitional, virtio-non-transitional,
usb-net, spapr-vlan, lan9118, smc91c111
Because the qemu driver has historically also allowed the raw
model string onto the qemu command line, this isn't a full
conversion. Unwinding that will require more thought. However
for all new driver code we should be adding explicit enum
values for any model name we have special handling for.
Remove the now unused virDomainNetStreqModelString
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The vz driver only handles three models: virtio, e1000, and rtl8139.
Add enum values for those models, and convert the vz driver to
handling net->model natively
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This adds a network model enum. The virDomainNetDef property
is named 'model' like most other devices.
When the XML parser or a driver calls NetSetModelString, if
the passed string is in the enum, we will set net->model,
otherwise we copy the string into net->modelstr
Add a single example for the 'netfront' xen model, and wire
that up, just to verify it's all working
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We will be adding a 'model' enum in upcoming patches. Rename
the existing value to make the differentiation clear
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
To ease converting the net->model value to an enum, add
the wrapper functions:
virDomainNetGetModelString
virDomainNetSetModelString
virDomainNetStreqModelString
virDomainNetStrcaseeqModelString
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
In the case of a network with forward=bridge, which has a bridge device
listed, we are capable of setting bandwidth limits but fail to call the
function to register them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
hostdevs have a link back to the original network device. This is fairly
generic accepting any type of device, however, we don't intend to make
use of this approach in future. It can thus be specialized to network
devices.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
