The virsh-self-test script compared the test's return code with 1 and only if
the return code matched this value then the test was marked as failed. Problem
is that SIGSEGV returns 139 (or 11 to be precise, since shell reserves the MSB
for abnormal exit signaling) which passes the check just fine and test then
appears as successful which it most certainly wasn't.
Therefore, flip the logic to compare against 0 instead and every other result
will be treated as a failed test case.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In a full domain config, libvirt allows overriding the normal PCI
vs. PCI Express rules when a device address is explicitly provided
(so, e.g., you can force a legacy PCI device to plug into a PCIe port,
although libvirt would never do that on its own). However, due to a
bug libvirt doesn't give this same leeway when hotplugging devices. On
top of that, current libvirt assumes that *all* devices are legacy
PCI. The result of all this is that it's impossible to hotplug a
device into a PCIe port, even if you manually add the PCI address.
This can all be traced to the function
virDomainPCIAddressEnsureAddr(), and the fact that it calls
virDomainPCIaddressReserveSlot() for manually set addresses, and that
function hardcodes the argument "fromConfig" to false (meaning "this
address was auto-assigned, so it should be subject to stricter
validation").
Since virDomainPCIAddressReserveSlot() is just a one line simple
wrapper around virDomainPCIAddressReserveAddr() (adding in a hardcoded
reserveEntireSlot = true and fromConfig = false), all that's needed to
solve the problem with no unwanted side effects is to replace that
call for virDomainPCIAddressReserveSlot() with a direct call to
virDomainPCIAddressReserveAddr(), but with reserveEntireSlot = true,
fromConfig = true. That's what this patch does.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1337490
virQEMUDriverConfigNew() always initializes the bitmap in its
cgroupControllers member to -1 (i.e. all 1's).
Prior to commit a9331394, if qemu.conf had a line with
"cgroup_controllers", cgroupControllers would get reset to 0 before
going through a loop setting a bit for each named cgroup controller.
commit a9331394 left out the "reset to 0" part, so cgroupControllers
would always be -1; if you didn't want a controller included, there
was no longer a way to make that happen.
This was discovered by users who were using qemu commandline
passthrough to use the "input-linux" method of directing
keyboard/mouse input to a virtual machine:
https://www.redhat.com/archives/vfio-users/2016-April/msg00105.html
Here's the first report I found of the problem encountered after
upgrading libvirt beyond v2.0.0:
https://www.redhat.com/archives/vfio-users/2016-August/msg00053.html
Thanks to sL1pKn07 SpinFlo <sl1pkn07@gmail.com> for bringing the
problem up in IRC, and then taking the time to do a git bisect and
find the patch that started the problem.
previous commit:
commit 2c3223785c
Author: John Ferlan <jferlan@redhat.com>
Date: Mon Jun 13 12:30:34 2016 -0400
qemu: Add the ability to hotplug the TLS X.509 environment
added a parameter "bool listen" in some methods. This
unfortunately clashes with the listen() method, causing
compile failures on certain platforms (RHEL-6 for example)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit id 'a48c7141' altered how to determine if a volume was encrypted
by adding a peek at an offset into the file at a specific buffer location.
Unfortunately, all that was compared was the first "char" of the buffer
against the expect "int" value.
Restore the virReadBufInt32BE to get the complete field in order to
compare against the expected value from the qcow2EncryptionInfo or
qcow1EncryptionInfo "modeValue" field.
This restores the capability to create a volume with encryption, then
refresh the pool, and still find the encryption for the volume.
A LUKS volume uses the volume secret type just like the QCOW2 secret, so
adjust the loading of the default secrets to handle any volume that the
virStorageFileGetMetadataFromBuf code has deemed to be an encrypted volume
to search for the volume's secret. This lookup is done by volume usage
where the usage is expected to be the path to volume.
When a new filter is being defined, the return code is not handled properly,
thus triggering OOM error reporting routine (bug introduced by 51b2606f).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When migration fails, we need to poke QEMU monitor to check for a reason
of the failure. We did this using query-migrate QMP command, which is
not supposed to return any meaningful result on the destination side.
Thus if the monitor was still functional when we detected the migration
failure, parsing the answer from query-migrate always failed with the
following error message:
"info migration reply was missing return status"
This irrelevant message was then used as the reason for the migration
failure replacing any message we might have had.
Let's use harmless query-status for poking the monitor to make sure we
only get an error if the monitor connection is broken.
https://bugzilla.redhat.com/show_bug.cgi?id=1374613
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit id 'b00d7f29' shifted the opening of the /sys/devices/intel_cqm/type
file from event enable to perf event initialization. If the file did not
exist, then an error would be written to the domain log:
2016-09-06 20:51:21.677+0000: 7310: error : virFileReadAll:1360 : Failed to open file '/sys/devices/intel_cqm/type': No such file or directory
Since the error is now handled in virPerfEventEnable by checking if the
event_attr->attrType == 0 for CMT, MBML, and MBMT events - we can just
use the Quiet API in order to not log the error we're going to throw away.
Additionally, rather than using virReportSystemError, use virReportError
and VIR_ERR_ARGUMENT_UNSUPPORTED in order to signify that support isn't there
for that type of perf event - adjust the error message as well.
Akin to previous commit but for "virsh cpu-baseline" which
computes a baseline CPU for a set of host cpu elements.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Implement support for "virsh cpu-compare" so that we can calculate
common cpu element between a pool of hosts, which had a requirement
of providing host cpu description.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Parse libxl_hwcap accounting for versions since Xen 4.4 - Xen 4.7.
libxl_hwcaps is a set of cpuid leaves output that is described in [0] or
[1] in Xen 4.7. This is a collection of CPUID leaves that we version
in libvirt whenever feature words are reordered or added. Thus we keep the
common ones in one struct and others for each version. Since
libxl_hwcaps doesn't appear to have a stable format across all supported
versions thus we need to keep track of changes as a compromise until it's
exported in xen libxl API. We don't fail in initializing the driver in case
parsing of hwcaps failed for that reason. In addition, change the notation
on PAE feature such that is easier to read which bit it corresponds.
[0] xen/include/asm-x86/cpufeature.h
[1] xen/include/public/arch-x86/cpufeatureset.h
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Add support for describing cpu topology in host cpu element. In doing
so, refactor hwcaps part to its own helper namely libxlCapsInitCPU to
handle all host cpu related operations, including topology.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Qemu always opens the tray if forced to. Skip the waiting step in such
case.
This also helps if qemu does not report the tray change event when
opening the cdrom forcibly (the documentation says that the event will
not be sent although qemu in fact does trigger it even if @force is
selceted).
This is a workaround for a qemu issue where qemu does not send the tray
change event in some cases (after migration with empty closed locked
drive) and thus renders the cdrom useless from libvirt's point of view.
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1368368
When a source image is dropped when missing due to startup policy the
policy needs to be cleared since it was relevant only for the given
storage source. New sources need to update it if needed.
Just like in the previous commit, teach qemu driver to detect
whether qemu supports this configuration knob or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a new secret usage type known as "tls" - it will handle adding the
secret objects for various TLS objects that need to provide some sort
of passphrase in order to access the credentials.
The format is:
<secret ephemeral='no' private='no'>
<description>Sample TLS secret</description>
<usage type='tls'>
<name>mumblyfratz</name>
</usage>
</secret>
Once defined and a passphrase set, future patches will allow the UUID
to be set in the qemu.conf file and thus used as a secret for various
TLS options such as a chardev serial TCP connection, a NBD client/server
connection, and migration.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the incoming XML defined a path to a TLS X.509 certificate environment,
add the necessary 'tls-creds-x509' object to the VIR_DOMAIN_CHR_TYPE_TCP
character device.
Likewise, if the environment exists the hot unplug needs adjustment as
well. Note that all the return ret were changed to goto cleanup since
the cfg needs to be unref'd
Signed-off-by: John Ferlan <jferlan@redhat.com>
When building a chardev device string for tcp, add the necessary pieces to
access provide the TLS X.509 path to qemu. This includes generating the
'tls-creds-x509' object and then adding the 'tls-creds' parameter to the
VIR_DOMAIN_CHR_TYPE_TCP command line.
Finally add the tests for the qemu command line. This test will make use
of the "new(ish)" /etc/pki/qemu setting for a TLS certificate environment
by *not* "resetting" the chardevTLSx509certdir prior to running the test.
Also use the default "verify" option (which is "no").
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add a new TLS X.509 certificate type - "chardev". This will handle the
creation of a TLS certificate capability (and possibly repository) for
properly configured character device TCP backends.
Unlike the vnc and spice there is no "listen" or "passwd" associated. The
credentials eventually will be handled via a libvirt secret provided to
a specific backend.
Make use of the default verify option as well.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than specify perhaps multiple TLS X.509 certificate directories,
let's create a "default" directory which can then be used if the service
(e.g. for now vnc and spice) does not supply a default directory.
Since the default for vnc and spice may have existed before without being
supplied, the default check will first check if the service specific path
exists and if so, set the cfg entry to that; otherwise, the default will
be set to the (now) new defaultTLSx509certdir.
Additionally add a "default_tls_x509_verify" entry which can also be used
to force the peer verification option (for vnc it's a x509verify option).
Add/alter the macro for the option being found in the config file to accept
the default value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If a migration of a domain which is already defined on the destination
host failed early (before we tried to start QEMU), we would forget to
remove the incoming transient definition. Later on when someone starts
the domain on the destination host, we will use the stale incoming
definition and the persistent definition will just be ignored.
https://bugzilla.redhat.com/show_bug.cgi?id=1368774
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The code for replacing domain's transient definition with the persistent
one is repeated in several places and we'll need to add one more. Let's
make a nice helper for it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When using
virsh net-event non-existing-net
the error message says that 'either --list or event type is required'
This is misleading as 'virsh net-event $valid-event-type' is not going
to work either. What is expected is 'virsh net-event --event
$valid-event-type'
This commit fixes the string in pool-event, nodedev-event, event, and
net-event.
There is an issue with a wrong label inside vah_add_path().
The compilation fails with the error:
make[3]: Entering directory '/tmp/libvirt/src'
CC security/virt_aa_helper-virt-aa-helper.o
security/virt-aa-helper.c: In function 'vah_add_path':
security/virt-aa-helper.c:769:9: error: label 'clean' used but not defined
goto clean;
This patch moves 'clean' label to 'cleanup' label.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
This patch fixes a segfault in virt-aa-helper caused by attempting to
modify a static string literal. It is triggered when a domain has a
<filesystem> with type='mount' configured read-only and libvirt is
using the AppArmor security driver for sVirt confinement. An "R" is
passed into the function and converted to 'r'.
This patch is to delete the extra wrap "\n" after failed vol-resize
error for both "Failed to change size of volume to" and "Failed to change
size of volume by". For error with wrap, there will be an extra wrap
between two errors, such as:
(1)# virsh vol-resize --pool default --vol vol-test 5M
error: Failed to change size of volume 'vol-test' to 5M
error: invalid argument: Can't shrink capacity below current capacity unless shrink flag explicitly specified
(2)# virsh vol-resize /var/lib/libvirt/images/volds --shrink --delta 10M
error: Failed to change size of volume 'volds' by 10M
error: invalid argument: can't shrink capacity below existing allocation
Similarly to vcpu hotplug the emulator thread cgroup numa mapping needs
to be relaxed while hot-adding vcpus so that the threads can allocate
data in the DMA zone.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1370084
When hot-adding vcpus qemu needs to allocate some structures in the DMA
zone which may be outside of the numa pinning. Extract the code doing
this in a set of helpers so that it can be reused.
Unfortunately, commit a8962f70 only fixed first half of the reported issue of
virt-admin outputting negative values where unsigned int is expected by
BZ below, so this commit represents the other missing half of the fix.
resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356769
Signed-off-by: Erik Skultety <eskultet@redhat.com>
There is a possibility that qemu driver frees by unreferencing its
closeCallbacks pointer as it has the only reference to the object,
while in fact not all users of CloseCallbacks called thier
virCloseCallbacksUnset.
Backtrace is the following:
Thread #1:
0 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0
1 in virCondWait (c=<optimized out>, m=<optimized out>)
at util/virthread.c:154
2 in virThreadPoolFree (pool=0x7f0810110b50)
at util/virthreadpool.c:266
3 in qemuStateCleanup () at qemu/qemu_driver.c:1116
4 in virStateCleanup () at libvirt.c:808
5 in main (argc=<optimized out>, argv=<optimized out>)
at libvirtd.c:1660
Thread #2:
0 in virClassIsDerivedFrom (klass=0xdeadbeef, parent=0x7f0837c694d0) at util/virobject.c:169
1 in virObjectIsClass (anyobj=anyobj@entry=0x7f08101d4760, klass=<optimized out>) at util/virobject.c:365
2 in virObjectLock (anyobj=0x7f08101d4760) at util/virobject.c:317
3 in virCloseCallbacksUnset (closeCallbacks=0x7f08101d4760, vm=vm@entry=0x7f08101d47b0, cb=cb@entry=0x7f081d078fc0 <qemuProcessAutoDestroy>) at util/virclosecallbacks.c:163
4 in qemuProcessAutoDestroyRemove (driver=driver@entry=0x7f081018be50, vm=vm@entry=0x7f08101d47b0) at qemu/qemu_process.c:6368
5 in qemuProcessStop (driver=driver@entry=0x7f081018be50, vm=vm@entry=0x7f08101d47b0, reason=reason@entry=VIR_DOMAIN_SHUTOFF_SHUTDOWN, asyncJob=asyncJob@entry=QEMU_ASYNC_JOB_NONE, flags=flags@entry=0) at qemu/qemu_process.c:5854
6 in processMonitorEOFEvent (vm=0x7f08101d47b0, driver=0x7f081018be50) at qemu/qemu_driver.c:4585
7 qemuProcessEventHandler (data=<optimized out>, opaque=0x7f081018be50) at qemu/qemu_driver.c:4629
8 in virThreadPoolWorker (opaque=opaque@entry=0x7f0837c4f820) at util/virthreadpool.c:145
9 in virThreadHelper (data=<optimized out>) at util/virthread.c:206
10 in start_thread () from /lib64/libpthread.so.0
Let's reference CloseCallbacks object in virCloseCallbacksSet and
unreference in virCloseCallbacksUnset.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
In the latest glibc, major() and minor() functions are marked as
deprecated (glibc commit dbab6577):
CC util/libvirt_util_la-vircgroup.lo
util/vircgroup.c: In function 'virCgroupGetBlockDevString':
util/vircgroup.c:768:5: error: '__major_from_sys_types' is deprecated:
In the GNU C Library, `major' is defined by <sys/sysmacros.h>.
For historical compatibility, it is currently defined by
<sys/types.h> as well, but we plan to remove this soon.
To use `major', include <sys/sysmacros.h> directly.
If you did not intend to use a system-defined macro `major',
you should #undef it after including <sys/types.h>.
[-Werror=deprecated-declarations]
if (virAsprintf(&ret, "%d:%d ", major(sb.st_rdev), minor(sb.st_rdev)) < 0)
^~
In file included from /usr/include/features.h:397:0,
from /usr/include/bits/libc-header-start.h:33,
from /usr/include/stdio.h:28,
from ../gnulib/lib/stdio.h:43,
from util/vircgroup.c:26:
/usr/include/sys/sysmacros.h:87:1: note: declared here
__SYSMACROS_DEFINE_MAJOR (__SYSMACROS_FST_IMPL_TEMPL)
^
Moreover, in the glibc commit, there's suggestion to keep
ordering of including of header files as implemented here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch changes the signature of vshCompleters, allowing to pass along
some data that we might want to along with the completers; for example,
we might want to pass the autocomplete vshControl along with the
completer, in case the completer requires a connection to libvirtd.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Current implementation uses the dev.cpu.0.freq sysctl that is
provided by the cpufreq(4) framework and returns the actual
CPU frequency. However, there are environments where it's not available,
e.g. when running nested in KVM. In this case fall back to hw.clockrate
that reports CPU frequency at the boot time.
Resolves (hopefully):
https://bugzilla.redhat.com/show_bug.cgi?id=1369964
Having After=libvirtd.service merely ensures that, if both
services are asked to start, libvirtd.service will start
first.
What we really want is for libvirtd.service to be started
whenever libvirt-guests.service is asked to start. Adding a
Requires= relationship guarantees that will happen.
We use a separate line for each After= relationship in other
unit files: do the same here for consistency's sake, and also
to make future changes nicer to diff
libvirt-guests.service does both suspend *and* resume guests,
depending on whether it's being started or stopped: the
description should reflect this, to avoid confusing messages
during startup.
Replace "active" with "running" (to match virsh list's output)
and don't capitalize libvirt.
We already guarantee that virtlogd.socket is enabled/disabled
along with libvirtd.service, but if libvirtd.service has just
been installed and is started before rebooting, then
virtlogd.socket will not be running and guest startup will
fail.
Add Requires=virtlogd.socket to libvirtd.service to make sure
virtlogd.socket is always started along with libvirtd.service,
and add Before=libvirtd.service to both virtlogd.socket and
virtlogd.service so that virtlogd never disappears before
libvirtd has exited.
Also add PartOf=libvirtd.service to both virtlogd.socket and
virtlogd.service, so that virtlogd can be shut down when not
needed.
Resolves: https://bugzilla.redhat.com/1372576
