* configure.ac docs/news.html.in libvirt.spec.in: updates for new
release
* po/*.po*: pulled translations from the transifex teams and regenerated
localizations
Leak detected by Coverity; only possible on unlikely ptsname_r
failure. Additionally, the man page for ptsname_r states that
failure is merely non-zero, not necessarily -1.
* src/util/util.c (virFileOpenTtyAt): Avoid leak on ptsname_r
failure.
Coverity detected that ifaceGetNthParent had already dereferenced
'nth' prior to the conditional; all callers already complied with
passing a non-NULL pointer so make this part of the contract.
* src/util/interface.h (ifaceGetNthParent): Add annotations.
* src/util/interface.c (ifaceGetNthParent): Drop useless null check.
In virNetServerNew, Coverity didn't realize that srv->mdsnGroupName
can only be non-NULL if mdsnGroupName was non-NULL.
In virNetServerRun, Coverity didn't realize that the array is non-NULL
if the array count is non-zero.
* src/rpc/virnetserver.c (virNetServerNew): Use alternate pointer.
(virNetServerRun): Give coverity a hint.
Coverity complained that 395 out of 409 virAsprintf calls are
checked, and therefore assumed that the remaining cases are bugs
waiting to happen. But in each of these cases, a failed virAsprintf
will properly set the target string to NULL, and pass on that
failure to the caller, without wasting efforts to check the call.
Adding the ignore_value silences Coverity.
* src/conf/domain_audit.c (virDomainAuditGetRdev): Ignore
virAsprintf return value, when it behaves like we need.
* src/network/bridge_driver.c (networkDnsmasqLeaseFileNameDefault)
(networkRadvdConfigFileName, networkBridgeDummyNicName)
(networkRadvdPidfileBasename): Likewise.
* src/util/storage_file.c (absolutePathFromBaseFile): Likewise.
* src/openvz/openvz_driver.c (openvzGenerateContainerVethName):
Likewise.
* src/util/command.c (virCommandTranslateStatus): Likewise.
Quite a few leaks detected by coverity. For chr, the leaks were
close enough to the allocations to plug in place; for disk, the
leaks were separated from the allocation by enough other lines with
intermediate failure cases that I refactored the cleanup instead.
* src/qemu/qemu_command.c (qemuParseCommandLine): Plug leaks.
Warning detected by Coverity. No need for the NULL check, and
removing it silences the warning without any semantic change.
* src/qemu/qemu_migration.c (qemuMigrationFinish): All entries to
endjob had non-NULL vm.
Detected by Coverity. Freeing the wrong variable results in both
a memory leak and the likelihood of the caller dereferencing through
a freed pointer.
* src/rpc/virnettlscontext.c (virNetTLSSessionNew): Free correct
variable.
Coverity detected that 5 of 6 callers of virJSONValueArrayGet checked
for a NULL return; and that by not checking we risk a null deref
during an error. The error is unlikely since the prior call to
virJSONValueArraySize would probably have already caught any botched
JSON array parse, but better safe than sorry.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONGetBlockJobInfo):
Check for NULL.
(qemuMonitorJSONExtractPtyPaths): Fix typo.
Detected by Coverity. We want to compare the result of fnmatch 'rv',
not our pre-set return value 'ret'.
* src/rpc/virnetsaslcontext.c (virNetSASLContextCheckIdentity):
Check correct variable.
Right now, every re-run of configure re-evaluates whether a
static analysis tool is in use. But if you run configure under
coverity, make a tweak, and then do an incremental rebuild with
gcc but not coverity to test the tweak, then rerun a build under
coverity, then configure does not get rerun, and static analysis
ends up with lots of false positives.
This patch caches the static analysis result, and also makes it
easier to force static analysis even if the existing checks are
insufficient to detect newer versions of the static analyzer tools.
* configure.ac (lv_cv_static_analysis): New cache variable.
Revert 6a1f5f568f. Now that libvirt_iohelper takes fds by
inheritance rather than by open() (commit 1eb66479), there is
no longer a race where the parent can unlink() a file prior to
the iohelper open()ing the same file. From there, it makes
more sense to have the callers both create and unlink, rather
than the caller create and the stream unlink, since the latter
was only needed when iohelper had to do the unlink.
* src/fdstream.h (virFDStreamOpenFile, virFDStreamCreateFile):
Callers are responsible for deletion.
* src/fdstream.c (virFDStreamOpenFileInternal): Don't leak created
file on failure.
(virFDStreamOpenFile, virFDStreamCreateFile): Drop parameter.
* src/lxc/lxc_driver.c (lxcDomainOpenConsole): Update callers.
* src/qemu/qemu_driver.c (qemuDomainScreenshot)
(qemuDomainOpenConsole): Likewise.
* src/storage/storage_driver.c (storageVolumeDownload)
(storageVolumeUpload): Likewise.
* src/uml/uml_driver.c (umlDomainOpenConsole): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainOpenConsole): Likewise.
The previous qemu patch could end up calling unlink(tmp) before
tmp was the name of a valid file (unlinking a fileXXXXXX template
instead), or calling unlink(tmp) twice on success (once here,
and once at the end of the stream). Meanwhile, vbox also suffered
from the same leaked tmp file bug.
* src/qemu/qemu_driver.c (qemuDomainScreenshot): Don't unlink on
success, or on invalid name.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Don't leak temp file.
Spotted by Coverity. Gnutls documents that buffer must be NULL
if gnutls_x509_crt_get_key_purpose_oid is to be used to determine
the correct size needed for allocating a buffer.
* src/rpc/virnettlscontext.c
(virNetTLSContextCheckCertKeyPurpose): Initialize buffer.
Spotted by coverity. If pipe2 fails, then we attempt to close
uninitialized fds, which may result in a double-close.
* src/rpc/virnetserver.c (virNetServerSignalSetup): Initialize fds.
Steps to reproduce this problem (vm1 is not running):
for i in `seq 50`; do virsh managedsave vm1& done; killall virsh
Pre-patch, virNetServerClientClose could end up setting client->sock
to NULL prior to other cleanup functions trying to use client->sock.
This fixes things by checking for NULL in more places, and by deferring
the cleanup until after all queued messages have been served.
* src/rpc/virnetserverclient.c (virNetServerClientRegisterEvent)
(virNetServerClientGetFD, virNetServerClientIsSecure)
(virNetServerClientLocalAddrString)
(virNetServerClientRemoteAddrString): Check for closed socket.
(virNetServerClientClose): Rearrange close sequence.
Analysis from Wen Congyang.
This patch adds an internal function openvzGetVEStatus to
get the real state of the domain. This function is used in
various places in the driver, in particular to detect when
the domain has been shut down by the user with the "halt"
command.
Currently, we attempt to run sync job and async job at the same time. It
means that the monitor commands for two jobs can be run in any order.
In the function qemuDomainObjEnterMonitorInternal():
if (priv->job.active == QEMU_JOB_NONE && priv->job.asyncJob) {
if (qemuDomainObjBeginNestedJob(driver, obj) < 0)
We check whether the caller is an async job by priv->job.active and
priv->job.asynJob. But when an async job is running, and a sync job is
also running at the time of the check, then priv->job.active is not
QEMU_JOB_NONE. So we cannot check whether the caller is an async job
in the function qemuDomainObjEnterMonitorInternal(), and must instead
put the burden on the caller to tell us when an async command wants
to do a nested job.
Once the burden is on the caller, then only async monitor enters need
to worry about whether the VM is still running; for sync monitor enter,
the internal return is always 0, so lots of ignore_value can be dropped.
* src/qemu/THREADS.txt: Reflect new rules.
* src/qemu/qemu_domain.h (qemuDomainObjEnterMonitorAsync): New
prototype.
* src/qemu/qemu_process.h (qemuProcessStartCPUs)
(qemuProcessStopCPUs): Add parameter.
* src/qemu/qemu_migration.h (qemuMigrationToFile): Likewise.
(qemuMigrationWaitForCompletion): Make static.
* src/qemu/qemu_domain.c (qemuDomainObjEnterMonitorInternal): Add
parameter.
(qemuDomainObjEnterMonitorAsync): New function.
(qemuDomainObjEnterMonitor, qemuDomainObjEnterMonitorWithDriver):
Update callers.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal)
(qemudDomainCoreDump, doCoreDump, processWatchdogEvent)
(qemudDomainSuspend, qemudDomainResume, qemuDomainSaveImageStartVM)
(qemuDomainSnapshotCreateActive, qemuDomainRevertToSnapshot):
Likewise.
* src/qemu/qemu_process.c (qemuProcessStopCPUs)
(qemuProcessFakeReboot, qemuProcessRecoverMigration)
(qemuProcessRecoverJob, qemuProcessStart): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationToFile)
(qemuMigrationWaitForCompletion, qemuMigrationUpdateJobStatus)
(qemuMigrationJobStart, qemuDomainMigrateGraphicsRelocate)
(doNativeMigrate, doTunnelMigrate, qemuMigrationPerformJob)
(qemuMigrationPerformPhase, qemuMigrationFinish)
(qemuMigrationConfirm): Likewise.
* src/qemu/qemu_hotplug.c: Drop unneeded ignore_value.
whether or not previous return value is -1, the following codes will be
executed for a inactive guest in src/qemu/qemu_driver.c:
ret = virDomainSaveConfig(driver->configDir, persistentDef);
and if everything is okay, 'ret' is assigned to 0, the previous 'ret'
will be overwritten, this patch will fix this issue.
* src/qemu/qemu_driver.c: avoid return value is overwritten when give a argument
in out of blkio weight range for a inactive guest.
* how to reproduce?
% virsh blkiotune ${guestname} --weight 10
% echo $?
Note: guest must be inactive, argument 10 in out of blkio weight range,
and can get a error information by checking libvirtd.log, however,
virsh hasn't raised any error information, and return value is 0.
https://bugzilla.redhat.com/show_bug.cgi?id=726304
Signed-off-by: Alex Jia <ajia@redhat.com>
whether or not previous return value is -1, the following codes will be
executed for a inactive guest in qemuDomainSetMemoryParameters:
ret = virDomainSaveConfig(driver->configDir, persistentDef);
and if everything is okay, 'ret' is assigned to 0, the previous 'ret'
will be overwritten, this patch will fix this issue.
* src/qemu/qemu_driver.c: avoid return value is overwritten when set
min_guarante value to a inactive guest.
* how to reproduce?
% virsh memtune ${guestname} --min_guarante 1024
% echo $?
Note: guest must be inactive, in fact, 'min_guarante' hasn't been implemented
in memory tunable, and I can get the error when check actual libvirtd.log,
however, virsh hasn't raised any error information, and return value is 0.
Signed-off-by: Alex Jia <ajia@redhat.com>
This commands don't have a --pool option, so don't tell
vshCommandOptVolBy that there could be one. This made
vshCommandOptString for pooloptname fail and an "missing option"
error was reported.
Make pooloptname optional for vshCommandOptVolBy.
Introduced by f9a837da73, the condition is not changed after
the else clause is removed. So now it quit with "domain is not
running" when the domain is running. However, when the domain is
not running, it reports "no job is active".
How to reproduce:
1)
% virsh start $domain
% virsh domjobabort $domain
error: Requested operation is not valid: domain is not running
2)
% virsh destroy $domain
% virsh domjobabort $domain
error: Requested operation is not valid: no job is active on the domain
3)
% virsh save $domain /tmp/$domain.save
Before above commands finished, try to abort job in another terminal
% virsh domabortjob $domain
error: Requested operation is not valid: domain is not running
Originally noticed by comparing the xml generated by virDomainSave
with the xml produced by reparsing and redumping that xml, but I
also did an audit of every last use of VIR_DOMAIN_XML_INACTIVE in
domain_conf.c to ensure that no other discrepancies exist.
* src/conf/domain_conf.c (virDomainDeviceInfoIsSet): Add
parameter, and update all callers. Make static.
(virDomainNetDefFormat): Skip generated ifname.
(virDomainDefFormatInternal): Skip default <seclabel>.
(virDomainChrSourceDefParseXML): Skip generated pty path, and add
parameter. Update callers.
* src/conf/domain_conf.h (virDomainDeviceInfoIsSet): Delete.
* src/libvirt_private.syms (domain_conf.h): Update.
Using a macro ensures that all the code is looking for the same
prefix.
* src/conf/domain_conf.h (VIR_NET_GENERATED_PREFIX): New macro.
* src/conf/domain_conf.c (virDomainNetDefParseXML): Use it.
* src/uml/uml_conf.c (umlConnectTapDevice): Likewise.
* src/qemu/qemu_command.c (qemuNetworkIfaceConnect): Likewise.
Suggested by Laine Stump.
This is in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=723862
which points out that a guest on an "isolated" network could
potentially exploit the DNS forwarding provided by dnsmasq to create a
communication channel to the outside.
This patch eliminates that possibility by adding the "--no-resolv"
argument to the dnsmasq commandline, which tells dnsmasq to not
forward on any requests that it can't resolve itself (by looking at
its own static hosts files and runtime list of dhcp clients), but to
instead return a failure for those requests.
This shouldn't cause any undesirable change from current
behavior, even in the case where a guest is currently configured with
multiple interfaces, one of them being connected to an isolated
network, and another to a network that does have connectivity to the
outside. If the isolated network's DNS server is queried for a name
it doesn't know, it will return "Refused" rather than "Unknown", which
indicates to the guest that it should query other servers, so it then
queries the connected DNS server, and gets the desired response.
Without this, cygwin failed to compile:
In file included from ../src/rpc/virnetmessage.h:24,
from ../src/rpc/virnetclient.h:27,
from remote/remote_driver.c:31:
../src/rpc/virnetprotocol.h:9:21: error: rpc/rpc.h: No such file or directory
With that fixed, compilation warned:
rpc/virnetsocket.c: In function 'virNetSocketNewListenUNIX':
rpc/virnetsocket.c:347: warning: format '%d' expects type 'int', but argument 8 has type 'gid_t' [-Wformat]
rpc/virnetsocket.c: In function 'virNetSocketGetLocalIdentity':
rpc/virnetsocket.c:743: warning: pointer targets in passing argument 5 of 'getsockopt' differ in signedness
* src/Makefile.am (libvirt_driver_remote_la_CFLAGS)
(libvirt_net_rpc_client_la_CFLAGS)
(libvirt_net_rpc_server_la_CFLAGS): Include XDR_CFLAGS, for rpc
headers on cygwin.
* src/rpc/virnetsocket.c (virNetSocketNewListenUNIX)
(virNetSocketGetLocalIdentity): Avoid compiler warnings.
POSIX states that 'a=1; a=2 b=$a command' has unspecified results
for the value of $b visible within command. In particular, on
BSD, this resulted in PATH not picking up the in-test ssh.
* tests/Makefile.am (lv_abs_top_builddir): New macro.
(path_add, TESTS_ENVIRONMENT): Use it to avoid referring to an
environment variable set previously within the same command line.
Reported by Matthias Bolte.
Commit 3709a386 ported hooks codes to new command execution API,
together with the useful error message removed. Though we can't
get "errbuf" from the new command execution API anymore, still
we can give a more useful error.
https://bugzilla.redhat.com/show_bug.cgi?id=726398
Gettext annoyingly modifies CPPFLAGS in-place, putting
-I/usr/local/include into the search patch if libintl headers
must be used from that location. But since we must support
automake 1.9.6 which lacks AM_CPPFLAGS, and since CPPFLAGS is used
prior to INCLUDES, this means that the build picks up the _old_
installed libvirt.h in priority to the in-tree version, leading
to all sorts of weird build failures on FreeBSD.
Fix this by teaching configure to undo gettext's actions, but
to keep any changes required by gettext at the end of INCLUDES
after all in-tree locations are used first. Also requires
adding a wrapper Makefile.am and making gnulib-tool create
just gnulib.mk files during the bootstrap process.
Signed-off-by: Eric Blake <eblake@redhat.com>
The goal here is that save-image-dumpxml fed back to
save-image-define should not change the save file; anywhere that
this is not the case is probably a bug in domain_conf.c.
* src/qemu/qemu_driver.c (qemuDomainSaveImageGetXMLDesc)
(qemuDomainSaveImageDefineXML): New functions.
(qemuDomainSaveImageOpen): Add parameter.
(qemuDomainRestoreFlags, qemuDomainObjRestore): Adjust clients.
With this, it is possible to update the path to a disk backing
image on either the save or restore action, without having to
binary edit the XML embedded in the state file.
This also modifies virDomainSave to output a smaller xml (only
the inactive xml, which is all the more virDomainRestore parses),
while still guaranteeing padding for most typical abi-compatible
xml replacements, necessary so that the next patch for
virDomainSaveImageDefineXML will not cause unnecessary
modifications to the save image file.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal): Add parameter,
only use inactive state, and guarantee padding.
(qemuDomainSaveImageOpen): Add parameter.
(qemuDomainSaveFlags, qemuDomainManagedSave)
(qemuDomainRestoreFlags, qemuDomainObjRestore): Update callers.
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.
* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
Found by:
for f in $(sed -n 's/.*Drv[^ ]* \([^;]*\);.*/\1/p' src/xen/xen_driver.h)
do
git grep "\(\.\|->\)$f\b" src/xen
done | cat
and looking through the resulting list to see which callback struct
members are still necessary.
* src/xen/xen_driver.h (xenUnifiedDriver): Drop all callbacks that
are only used directly.
* src/xen/xen_hypervisor.c (xenHypervisorDriver): Shrink list.
* src/xen/xen_inotify.c (xenInotifyDriver): Likewise.
* src/xen/xend_internal.c (xenDaemonDriver): Likewise.
* src/xen/xm_internal.c (xenXMDriver): Likewise.
* src/xen/xs_internal.c (xenStoreDriver): Likewise.
No need to use a for loop if we know there is exactly one client.
Found by:
for f in $(sed -n 's/.*Drv[^ ]* \([^;]*\);.*/\1/p' src/xen/xen_driver.h)
do
git grep "\(\.\|->\)$f\b" src/xen
done | cat
and looking through the resulting list to see which callback struct
members are used exactly once. The next patch will ensure that we
don't reintroduce uses of these callbacks.
* src/xen/xen_driver.c (xenUnifiedClose): Call close
unconditionally, to match xenUnifiedOpen.
(xenUnifiedNodeGetInfo, xenUnifiedDomainCreateXML)
(xenUnifiedDomainSave, xenUnifiedDomainRestore)
(xenUnifiedDomainCoreDump, xenUnifiedDomainUpdateDeviceFlags):
Make direct call to lone implementation.
* src/xen/xend_internal.h (xenDaemonDomainCoreDump)
(xenDaemonUpdateDeviceFlags, xenDaemonCreateXML): Add prototypes.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump)
(xenDaemonUpdateDeviceFlags, xenDaemonCreateXML): Export.
The callback struct is great when iterating through several
possibilities, but when calling a known callback, it's just
overhead. We can make the direct call in those cases.
* src/xen/xen_driver.c (xenUnifiedOpen, xenUnifiedDomainSuspend)
(xenUnifiedDomainResume, xenUnifiedDomainDestroyFlags): Make
direct calls instead of going through callback.
Using C99 initializers and xen-specific prefixes will make it
so that future patches are less likely to add callback members
to the xenUnifiedDriver struct, since the goal is to get rid
of the callback struct in the first place.
* src/xen/xen_driver.h (xenUnifiedDriver): Rename all struct
members, to make it obvious which ones are still in use.
* src/xen/xen_driver.c: Update all callers.
* src/xen/xen_hypervisor.c (xenHypervisorDriver): Rewrite with C99
initializers.
* src/xen/xend_internal.c (xenDaemonDriver): Likewise.
* src/xen/xs_internal.c (xenStoreDriver): Likewise.
* src/xen/xm_internal.c (xenXMDriver): Likewise.
* src/xen/xen_inotify.c (xenInotifyDriver): Likewise.
