This reverts commit f4db846c32.
This patch results in the following error when trying to start
essentially any VM with default network:
unsupported configuration: QOS must be defined for network 'default'
Coverity didn't see that the bandwidth == NULL it complained about in
virNetDevBandwidthPlug was already checked properly in
networkCheckBandwidth, thus causing networkPlugBandwidth to return 0
and finish before a call to virNetDevBandwidthPlug would have been even
made.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If networkAllocatePort calls networkPlugBandwidth eventually the
port->bandwidth would be passed to virNetDevBandwidthPlug which
requires that the parameter is non-NULL. Coverity additionally
notes that since (!port->bandwidth) is checked earlier in the
networkAllocatePort method that the subsequent call to blindly
use if for a function that requires it needs to check.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We go through the trouble of checking {old|new}Bandwidth[->in] and
storing the result in local @old_floor and @new_floor, but then
we don't use them. Instead we make derefs to the longer name. This
caused Coverity to note dereferencing newBandwidth->in without first
checking @newBandwidth like was done for new_floor could cause a
NULL dereference.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In my previous commit of v5.9.0-83-g4ae7181376 I've fixed
check-aclrules but whilst doing so, I forgot to wrap long
lines that I've added.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Previously we generated all source files into $srcdir which is no
longer true. This means that we can't just blindly prepend each
source file with $srcdir.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Previously we generated all source files into $srcdir which is no
longer true. This means that we can't just blindly prepend each
source file with $srcdir.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When libvirt first implemented a stable and configurable MAC address
for the bridges created for libvirt virtual networks (commit
5754dbd56d, in libvirt v0.8.8) most distro stable releases didn't
support explicitly setting the MAC address of a bridge; the bridge
just always assumed the lowest numbered MAC of all attached
interfaces. Because of this, we stabilized the bridge MAC address by
creating a "dummy" tap interface with a MAC address guaranteed to be
lower than any of the guest tap devices' MACs (which all started with
0xFE, so it's not difficult to do) and attached it to the bridge -
this was the inception of the "virbr0-nic" device that has confused so
many people over the years.
Even though the linux kernel had recently gained support for
explicitly setting a bridge MAC, we deemed it unnecessary to set the
MAC that way, because the other (indirect) method worked everywhere.
But recently there have been reports that the bridge MAC address was
not following the setting in the network config, and mismatched the
MAC of the dummy tap device (which was still correct). It turns out
that this is due to a change in systemd-242 that persists whatever MAC
address is set for a bridge when it's initially started. According to
the systemd NEWS file entry for version 242
(https://github.com/systemd/systemd/blob/master/NEWS):
"if a bridge interface is created without any slaves, and gains
a slave later, then now the bridge does not inherit slave's MAC."
This change was the result of:
https://github.com/systemd/systemd/issues/3374
(apparently if there is no MAC saved for a bridge by the name of a
bridge being created, the random MAC generated during creation is
saved, and then that same MAC is used to explicitly set the MAC each
time it is created). Once a bridge has an explicitly set MAC, the "use
the lowest numbered MAC of attached devices" rule is ignored, so our
dummy tap device is like the goggles - it does nothing! (well, almost).
We could whine about changes in default behavior, etc. etc., but
because the change was in response to actual user problems, that seems
likely a fruitless task. Fortunately, time has marched on, and even
distro releases that are old enough that they are no longer supported
by upstream libvirt (e.g. RHEL6) have support for explicitly setting a
bridge device MAC address, either during creation or with a separate
ioctl after creation, so we can now do that.
To enable explicitly setting the mac during bridge creation, we add a
mac arg to virNetDevBridgeCreate(). In the case of platforms where
the bridge is created with a netlink RTM_NEWLINK message, we just add
that mac to the message. For platforms that still use an ioctl (either
SIOCBRADDBR or SIOCIFCREATE2), we make a separate call to
virNetDevSetMAC() after creating the bridge.
(NB: I was unable to test the calling of virNetDevSetMAC() from the
SIOCIFCREATE2 (BSD) version of virNetDevBridgeCreate(); even though I
managed to get a FreeBSD system setup and libvirt built there, when I
tried to start the default network the SIOCIFCREATE2 ioctl itself
failed, so it never even got to the virNetDevSetMAC(). That leaves the
FreeBSD implementation untested.)
This makes the dummy tap pointless for purposes of setting the MAC
address, but it is still useful for IPv6 DAD initialization (which
apparently requires at least one interface to be attached to the
bridge and online), as well as for setting an initial MTU for the
bridge, so it hasn't been removed.
(NB: we can safely *always* call virNetDevBridgeCreate() with
&def->mac from the network driver because, in spite of the existence
of a "mac_specified" bool in the config suggesting that it may not
always be present, in reality a mac address will always be added to
any network that doesn't have one - this is guaranteed in all cases by
commit a47ae7c004)
https://bugzilla.redhat.com/show_bug.cgi?id=1760851
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In few places we have the following code pattern:
int ret;
... /* @ret is not accessed here */
ret = f(...);
return ret;
This pattern can be written less verbose:
...
return f(...);
This patch was generated with following coccinelle spatch:
@@
type T;
constant C;
expression f;
identifier ret;
@@
-T ret = C;
... when != ret
-ret = f;
-return ret;
+return f;
Afterwards I needed to fix a few places, e.g. comment in
virDomainNetIPParseXML() was removed too because coccinelle
thinks it refers to @ret while in fact it doesn't. Also in few
places it replaced @ret declaration with a few spaces instead of
removing the line. But nothing terribly wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While the default iptables setup used by Fedora/RHEL distros
only restricts traffic on the INPUT and/or FORWARD rules,
some users might have custom firewalls that restrict the
OUTPUT rules too.
These can prevent DHCP/DNS/TFTP responses from dnsmasq
from reaching the guest VMs. We should thus whitelist
these protocols in the OUTPUT chain, as well as the
INPUT chain.
Signed-off-by: Malina Salina <malina.salina@protonmail.com>
Initial patch then modified to add unit tests and IPv6
support
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The use of $(AUG_GENTEST) as a dependency in the makefiles is
a problem because this was assumed to be the filename of the
script, but is in fact a full shell command line.
Split it into two variables, so it can be correctly used for
dependencies.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all of its use by the GLib
macro version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f02915
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Also define the macro for building with GLib older than 2.60
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove all usage of ATTRIBUTE_NORETURN in favor of GLib's
G_GNUC_NORETURN.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The usleep function was missing on older mingw versions, but we can rely
on it existing everywhere these days. It may only support times upto 1
second in duration though, so we'll prefer to use g_usleep instead.
The commandhelper program is not changed since that can't link to glib.
Fortunately it doesn't need to build on Windows platforms either.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add the main glib.h to internal.h so that all common code can use it.
Historically glib allowed applications to register an alternative
memory allocator, so mixing g_malloc/g_free with malloc/free was not
safe.
This was feature was dropped in 2.46.0 with:
commit 3be6ed60aa58095691bd697344765e715a327fc1
Author: Alexander Larsson <alexl@redhat.com>
Date: Sat Jun 27 18:38:42 2015 +0200
Deprecate and drop support for memory vtables
Applications are still encourged to match g_malloc/g_free, but it is no
longer a mandatory requirement for correctness, just stylistic. This is
explicitly clarified in
commit 1f24b36607bf708f037396014b2cdbc08d67b275
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Thu Sep 5 14:37:54 2019 +0100
gmem: clarify that g_malloc always uses the system allocator
Applications can still use custom allocators in general, but they must
do this by linking to a library that replaces the core malloc/free
implemenentation entirely, instead of via a glib specific call.
This means that libvirt does not need to be concerned about use of
g_malloc/g_free causing an ABI change in the public libary, and can
avoid memory copying when talking to external libraries.
This patch probes for glib, which provides the foundation layer with
a collection of data structures, helper APIs, and platform portability
logic.
Later patches will introduce linkage to gobject which provides the
object type system, built on glib, and gio which providing objects
for various interesting tasks, most notably including DBus client
and server support and portable sockets APIs, but much more too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1755303
With the recent work in daemon split and socket activation
daemons can come and go. They can and will be started many times
during a session which results in objects being autostarted
multiple times. This is not optimal. Use
virDriverShouldAutostart() to determine if autostart should be
done or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
define a VIR_DEFINE_AUTOPTR_FUNC() to autofree virNetworkPortDefs, and
convert all uses of virNetworkPortDefPtr that are appropriate to use
it.
This coincidentally fixes multiple potential memory leaks (in failure
cases) in networkPortCreateXML()
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The filename match rule was accidentally excluding the
Makefile.inc.am files from the long lines check.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Neither virThreadInitialize or virThreadOnExit do anything since we
dropped the Win32 threads impl, in favour of win-pthreads with:
commit 0240d94c36
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Jan 22 16:17:10 2014 +0000
Remove windows thread implementation in favour of pthreads
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To aid in troubleshooting add some debug messages wrt
bandwidth settings and networks.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We previously allowed bandwidth settings when attaching NICs
to networks with forward mode=bridge:
commit 42a92ee93d
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Nov 20 11:30:05 2018 +0000
network: add missing bandwidth limits for bridge forward type
In the case of a network with forward=bridge, which has a bridge device
listed, we are capable of setting bandwidth limits but fail to call the
function to register them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Unfortunately the wrong version of this patch was posted and
reviewed and thus it lacked the code to actually apply the
bandwidth settings to the bridge itself.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since the introduction of the virNetworkPort object, the network driver
has a persistent record of ports that have been created against the
networks. Thus the hypervisor drivers no longer communicate to the
network driver during libvirtd restart.
This change, however, meant that the connection usage counts were
no longer re-initialized during a libvirtd restart. To deal with this we
must iterate over all virNetworkPortDefPtr objects we have and invoke
the notify callback to record the connection usage count.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All code using LOCALSTATEDIR "/run" is updated to use RUNSTATEDIR
instead. The exception is the remote driver client which still
uses LOCALSTATEDIR "/run". The client needs to connect to remote
machines which may not be using /run, so /var/run is more portable
due to the /var/run -> /run symlink.
Some duplicate paths in the apparmor code are also purged.
There's no functional change by default yet since both expressions
expand to the same value.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Creating various directories using $(runstatedir) instead of
$(localstatedir)/run.
There's no functional change by default yet since both expressions
expand to the same value.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Store the namespace URI as const char*, instead of in a function.
Suggested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There is no need to copy and paste the same types pointing
to void all over the place.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
virErrorPreserveLast()/virErrorRestore() (added in commit 8333e7455
back in 2017), do a better better job of saving and restoring the last
libvirt error than virSaveLastError()/virErrorRestore() (they're
simpler, and they also save/restore the system errno).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
During networkPortCreateXML, if networkAllocatePort() failed,
networkReleasePort() would be called, which would (in the case of
network pools of macvtap passthrough devices) attempt to find the
allocated device by comparing port->plug.direct.linkdev to each device
in the pool. Since port->plug.direct.linkdev was still NULL, the
attempted strcmp would result in a SEGV.
Calling networkReleasePort() during error cleanup is something that
should only be done if networkAllocatePort() has already succeeded. It
turns out there is one other possible error exit from
networkPortCreateXML() that happens after networkAllocatePort() has
succeeded, so the code to call networkReleasePort() was just moved
down to there.
Resolves: https://bugzilla.redhat.com/1741390
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virtnetworkd daemon will be responsible for providing the network API
driver functionality. The network driver is still loaded by the main
libvirtd daemon at this stage, so virtnetworkd must not be running at
the same time.
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When running in libvirtd, we are happy for any of the drivers to simply
skip their initialization in virStateInitialize, as other drivers are
still potentially useful.
When running in per-driver daemons though, we want the daemon to abort
startup if the driver cannot initialize itself, as the daemon will be
useless without it.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the correct enum constant when validating vlan usage.
This fixes a merge error in
commit 6cb0ec48bd
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon Sep 3 17:34:22 2018 +0100
network: convert networkAllocateActualDevice to virNetworkPortDef
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that 100% of libvirt code is forbidden in a SUID environment,
we no longer need to worry about whether env variables are
trustworthy or not. The virt-login-shell setuid program, which
does not link to any libvirt code, will purge all environment
variables, except $TERM, before invoking the virt-login-shell-helper
program which uses libvirt.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since fb9f6ce625 we are including a libxml header file in the
network driver but never link with it. This hasn't caused an
immediate problem because in the end the network driver links
with libvirt.la. But apparently, it's causing a build issue on
old Ubuntu.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Pass an xmlopt argument through all the needed network conf
functions, like is done for domain XML handling. No functional
change for now
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Just a stub for now that is unused. Add init+cleanup plumbing and
demostrate it in bridge_driver.c
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
When the drivers acquire their pidfile lock we don't want to wait if the
lock is already held. We need the driver to immediately report error,
causing the daemon to exit.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/network/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/network/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The sys/sysctl.h header is only needed on BSD platforms to get
the sysctlbyname() function declaration. On Linux we talk to
procfs instead to change sysctls.
Unfortunately a legacy sys/sysctl.h header does exist on Linux
and including it has recently started triggering a deprecation
warning from glibc.
Protect its inclusion with a HAVE_SYSCTLBYNAME check instead
so that it only gets used on platforms where we need that
function declaration.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Change the domain conf so invoke the new network port public APIs instead
of the network callbacks.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This initial implementation just wires up the APIs and does tracking of
the port XML definitions. It is not yet integrated into the resource
allocation logic.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port bandwidth update code from the domain driver
network callback implementation.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port deletion code from the domain driver network
callback implementation.
Reivewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port notification code from the domain driver network
callback implementation.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Separate network port allocation code from the domain driver network
callback implementation.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current qemu driver code for changing bandwidth on a NIC first asks
the network driver if the change is supported, then changes the
bandwidth on the VIF, and then tells the network driver to update the
bandwidth on the bridge.
This is potentially racing if a parallel API call causes the network
driver to allocate bandwidth on the bridge between the check and the
update phases.
Change the code to just try to apply the network bridge update
immediately and rollback at the end if something failed.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When (un)plugging an interface into a network, the 'plugged'
and 'unplugged' operations are invoked in the hook script.
The data provided to the script contains the network XML, the
domain XML and the domain interface XML. When we strictly split the
drivers up this will no longer be possible and thus breakage is
unavoidable. The hook scripts are not considered to be covered by the
API guarantee so this is OK.
To avoid existing scripts taking the wrong action, the existing
operations are changed to 'port-created' and 'port-deleted'
instead. These will receive the network XML and the network port
XML.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the virDomainNetDef object into a virNetworkPortDef object
at the start of networkReleaseActualDevice. This largely decouples
the method impl from the domain object type.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the virDomainNetDef object into a virNetworkPortDef object
at the start of networkNotifyActualDevice. This largely decouples
the method impl from the domain object type.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the virDomainNetDef object into a virNetworkPortDef object
at the start of networkAllocateActualDevice. This largely decouples
the method impl from the domain object type.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Stop passing a virDomainNetDefPtr parameter to networkLogAllocation,
instead just pass in the MAC address. The actual device type is also not
required, since virNetworkForwardIfDefPtr has a type field that can be
used instead.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Creating firewall rules for the virtual networks causes the kernel to
load the conntrack module. This imposes a significant performance
penalty on Linux network traffic. Thus we want to only take that hit if
we actually have virtual networks running.
We need to create global firewall rules during startup in order to
"upgrade" rules for any running networks created by older libvirt.
If no running networks are present though, we can safely delay setup
until the time we actually start a network.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Pull the logic for creating global iptables chains into a separate
method and protect its invocation with virOnce, to make it possible
to reuse it in non-startup paths.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In attempt to getting rid of errN labels let's start with the
most upper one and rename it to 'error'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Various binaries are statically linking to libvirt_util.la and
other intermediate libraries we build. These intermediate libs
all get built into the main libvirt.so shared library eventually,
so we can dynamically link to that instead and reduce the on disk
footprint.
In libvirt-daemon RPM:
virtlockd: 1.6 MB -> 153 KB
virtlogd: 1.6 MB -> 157 KB
libvirt_iohelper: 937 KB -> 23 KB
In libvirt-daemon-driver-network RPM:
libvirt_leaseshelper: 940 KB -> 26 KB
In libvirt-daemon-driver-storage-core RPM:
libvirt_parthelper: 926 KB -> 21 KB
IOW, about 5.6 MB total space saving in a build done on Fedora 30
x86_64 architecture.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This caused the live XML to report the 'bridge' type instead of the
'network' type, which is a behavioural regression.
It also breaks 'virsh domif-setlink', 'virsh update-device' and
'virsh domiftune'
This reverts commit 518026e159.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If there's an error when setting up QoS on a bridge the control
jumps over to 'err5' label. Here, the virNetDevBandwidthClear()
is called to clear out any partially set QoS. This function can
also report an error which would overwrite the actual error that
caused us jumping here. Use virErrorPreserveLast() to preserve
the original error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Replaced usage of virSaveLastError and virSetError/virFreeError with
virErrorPreserveLast and virErrorRestore respectively.
Signed-off-by: Syed Humaid <syedhumaidbinharoon@gmail.com>
During initial NIC setup the hypervisor drivers are responsible for
attaching the TAP device to the bridge device. Any fixup after libvirtd
restarts should thus also be their responsibility.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ports allocated on virtual networks with type=nat|route|open all get
given an actual type of 'network'.
Only ports in networks with type=bridge use an actual type of 'bridge'.
This distinction makes little sense since the virtualization drivers
will treat both actual types in exactly the same way, as they're all
just bridge devices a VM needs to be connected to.
This doesn't affect user visible XML since the "actual" device XML
is internal only, but we need code to convert the data upgrades.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reword error messages to make it clear that the combined floor settings
of all NICs are exceeding the network inbound peak/average
settings. Including the actual values being checked helps to diagnose
what is actually wrong.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In extreme cases libvirt can get mixed up about what VMs are running and
attached to a network leading to the cached floor sum value being
outdated. When this happens the only option is to destroy the network
and then restart libvirtd. If we set floor sum back to zero when
starting the network, we avoid the need for a libvirtd restart at least.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The networkPlugBandwidth & networkUnplugBandwidth methods currently take
a virDomainNetDefPtr. To remove the dependency on the domain config
struct, pass individual parameters instead.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All but one of the network types supports port profiles. Rather than
duplicating the code to merge profiles 3 times, do it once and then
later report an error if used from the wrong place.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Switch over to use the new API for re-attaching the bridge device
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the case of a network with forward=bridge, which has a bridge device
listed, we are capable of setting bandwidth limits but fail to call the
function to register them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
hostdevs have a link back to the original network device. This is fairly
generic accepting any type of device, however, we don't intend to make
use of this approach in future. It can thus be specialized to network
devices.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The actual network def was updated to save the bridge name back
in 1.2.11:
commit a360912179
Author: Laine Stump <laine@laine.org>
Date: Fri Nov 21 12:20:37 2014 -0500
network: save bridge name in ActualNetDef when actualType==network too
The chance that someone is running libvirt < 1.2.11 and wants
todo a live upgrade to 5.3.0 without a host reboot is essentially
zero. We can thus reasonably drop the back compat code now.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The APIs for allocating/notifying/removing network ports just take
an internal domain interface struct right now. As a step towards
turning these into public facing APIs, add a virNetworkPtr argument
to all of them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The port allocation APIs are currently called unconditionally for all
types of NIC, but (mostly) only do anything for NICs with type=network.
The exception is the port allocate API which does some validation even
for NICs with type!=network. Relying on this validation is flawed,
however, since the network driver may not even be installed. IOW virt
drivers must not delegate validation to the network driver for NICs
with type != network.
This change allows us to report errors when the virtual network driver
is not registered.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The network driver used to reload the firewall rules whenever a dbus
NameOwnerChanged message for org.fedoraproject.FirewallD1 was
received. Presumably at some point in the past this was successful at
reloading our rules after a firewalld restart. Recently though I
noticed that once firewalld was restarted, libvirt's logs would get this
message:
The name org.fedoraproject.FirewallD1 was not provided by any .service files
After this point, no networks could be started until libvirtd itself
was restarted.
The problem is that the NameOwnerChanged message is sent twice during
a firewalld restart - once when the old firewalld is stopped, and
again when the new firewalld is started. If we try to reload at the
point the old firewalld is stopped, none of the firewalld dbus calls
will succeed.
The solution is to check the new_owner field of the message - we
should reload our firewall rules only if new_owner is non-empty (it is
set to "" when firewalld is stopped, and some sort of epoch number
when it is again started).
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since:
commit 9f4e35dc73
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon Mar 18 17:31:21 2019 +0000
network: improve error report when firewall chain creation fails
We cache an error when failing to create the top level firewall chains.
This commit failed to account for fact that we may invoke
networkPreReloadFirewallRules() many times while libvirtd is running.
For example when firewalld is restarted.
When this happens the original failure may no longer occurr and we'll
successfully create our top level chains. We failed to clear the cached
error resulting in us failing to start virtual networks.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Vim has trouble figuring out the filetype automatically because
the name doesn't follow existing conventions; annotations like
the ones we already have in Makefile.ci help it out.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Standardize on putting the _LAST enum value on the second line
of VIR_ENUM_IMPL invocations. Later patches that add string labels
to VIR_ENUM_IMPL will push most of these to the second line anyways,
so this saves some noise.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This reverts commit a5e1602090.
Getting rid of unistd.h from our headers will require more work than
just fixing the broken mingw build. Revert it until I have a more
complete proposal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
util/virutil.h bogously included unistd.h. Drop it and replace it by
including it directly where needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virutil.(c|h) is a very gross collection of random code. Remove the enum
handlers from there so we can limit the scope where virtutil.h is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The unprivileged libvirtd does not have permission to create firewall
rules, or bridge devices, or do anything to the host network in
general. Historically we still activate the network driver though and
let the network start API call fail.
The startup code path which reloads firewall rules on active networks
would thus effectively be a no-op when unprivileged as it is impossible
for there to be any active networks
With the change to use a global set of firewall chains, however, we now
have code that is run unconditionally.
Ideally we would not register the network driver at all when
unprivileged, but the entanglement with the virt drivers currently makes
that impractical. As a temporary hack, we just make the firewall reload
into a no-op.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
During startup libvirtd creates top level chains for both ipv4
and ipv6 protocols. If this fails for any reason then startup
of virtual networks is blocked.
The default virtual network, however, only requires use of ipv4
and some servers have ipv6 disabled so it is expected that ipv6
chain creation will fail. There could equally be servers with
no ipv4, only ipv6.
This patch thus makes error reporting a little more fine grained
so that it works more sensibly when either ipv4 or ipv6 is
disabled on the server. Only the protocols that are actually
used by the virtual network have errors reported.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
During startup we create some top level chains in which all
virtual network firewall rules will be placed. The upfront
creation is done to avoid slowing down creation of individual
virtual networks by checking for chain existance every time.
There are some factors which can cause this upfront creation
to fail and while a message will get into the libvirtd log
this won't be seen by users who later try to start a virtual
network. Instead they'll just get a message saying that the
libvirt top level chain does not exist. This message is
accurate, but unhelpful for solving the root cause.
This patch thus saves any error during daemon startup and
reports it when trying to create a virtual network later.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
According to the official documentation for autoconf[1], the
correct names for these variables are abs_top_{src,build}dir
rather than abs_top{src,build}dir; in fact, we're already
using the correct names in various places, so let's just make
everything nice and consistent.
[1] https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/Preset-Output-Variables.html
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1685151
This reverts commit cefb97fb81.
The stateAutoStart callback will be removed in the next commit.
Therefore move autostarting of domains, networks and storage
pools back into stateInitialize callbacks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
dnsmasq documentation says that the *IPv4* prefix/network
address/broadcast address sent to dhcp clients will be automatically
determined by dnsmasq by looking at the interface it's listening on,
so the original libvirt code did not add a netmask to the dnsmasq
commandline (or later, the dnsmasq conf file).
For *IPv6* however, dnsmasq apparently cannot automatically determine
the prefix (functionally the same as a netmask), and it must be
explicitly provided in the conf file (as a part of the dhcp-range
option). So many years after IPv4 DHCP support had been added, when
IPv6 dhcp support was added the prefix was included at the end of the
dhcp-range setting, but only for IPv6.
A user had reported a bug on a host where one of the interfaces was a
superset of the libvirt network where dhcp is needed (e.g., the host's
ethernet is 10.0.0.20/8, and the libvirt network is 10.10.0.1/24). For
some reason dnsmasq was supplying the netmask for the /8 network to
clients requesting an address on the /24 interface.
This seems like a bug in dnsmasq, but even if/when it gets fixed
there, it looks like there is no harm in just always adding the
netmask to all IPv4 dhcp-range options similar to how prefix is added
to all IPv6 dhcp-range options.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The libvirt zonefile for firewalld (added in commit 3b71f2e4) does the
following:
1) lists specific services it wants to allow, then
2) uses a lower priority <reject/> rule to block all other services to
the host, and then finally,
3) relies on the zone's default "accept" policy to, accept all
forwarded traffic (since forwarded traffic is ignored by the
slightly higher priority <reject/> rule in (2)).
I had assumed that icmp traffic was either being allowed at the top of
the rules, or that it would be ignored by the <reject/> rule and
passed by the default accept policy (similar to forwarded traffic),
but this assumption was incorrect; the <reject/> rule does block icmp
traffic. This became apparent when DHCPv6 which requires ICMPv6 in
addition to udp/dhcpv6) failed to work.
This all means that in order to achieve our original goal of "similar
behavior to a default reject policy, but also allowing forwarded
traffic", we need to add rules to allow all icmp and icmpv6 traffic to
the libvirt zone, and that's what this patch does.
This is a further refinement of the resolution to
https://bugzilla.redhat.com/1650320
Signed-off-by: Laine Stump <laine@laine.org>
Acked-by: Eric Garver <eric@garver.life>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_IMPL calls.
Move the verify() statement to the end of the macro and drop
the semicolon, so the compiler will require callers to add a
semicolon.
While we are touching these call sites, standardize on putting
the closing parenth on its own line, as discussed here:
https://www.redhat.com/archives/libvir-list/2019-January/msg00750.html
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Since we're setting the zone anyway, it will be useful to allow
setting a different (custom) zone for each network. This will be done
by adding a "zone" attribute to the "bridge" element, e.g.:
...
<bridge name='virbr0' zone='myzone'/>
...
If a zone is specified in the config and it can't be honored, this
will be an error.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This patch restores broken guest network connectivity after a host
firewalld is switched to using an nftables backend. It does this by
adding libvirt networks' bridge interfaces to the new "libvirt" zone
in firewalld.
After this patch, the bridge interface of any network created by
libvirt (when firewalld is active) will be added to the firewalld
zone called "libvirt" if it exists (regardless of the firewalld
backend setting). This behavior does *not* depend on whether or not
libvirt has installed the libvirt zone file (set with
"--with[out]-firewalld-zone" during the configure phase of the package
build).
If the libvirt zone doesn't exist (either because the package was
configured to not install it, or possibly it was installed, but
firewalld doesn't support rule priorities, resulting in a parse
error), the bridge will remain in firewalld's default zone, which
could be innocuous (in the case that the firewalld backend is
iptables, guest networking will still function properly with the
bridge in the default zone), or it could be disastrous (if the
firewalld backend is nftables, we can be assured that guest networking
will fail). In order to be unobtrusive in the former case, and
informative in the latter, when the libvirt zone doesn't exist we
then check the firewalld version to see if it's new enough to support
the nftables backend, and then if the backend is actually set to
nftables, before logging an error (and failing the net-start
operation, since the network couldn't possibly work anyway).
When the libvirt zone is used, network behavior is *slightly*
different from behavior of previous libvirt. In the past, libvirt
network behavior would be affected by the configuration of firewalld's
default zone (usually "public"), but now it is affected only by the
"libvirt" zone), and thus almost surely warrants a release note for
any distro upgrading to libvirt 5.1 or above. Although it's
unfortunate that we have to deal with a mandatory behavior change, the
architecture of multiple hooks makes it impossible to *not* change
behavior in some way, and the new behavior is arguably better (since
it will now be possible to manage access to the host from virtual
machines vs from public interfaces separately).
Creates-and-Resolves: https://bugzilla.redhat.com/1650320
Resolves: https://bugzilla.redhat.com/1638342
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In the past (when both libvirt and firewalld used iptables), if either
libvirt's rules *OR* firewalld's rules accepted a packet, it would
be accepted. This was because libvirt and firewalld rules were
processed during the same kernel hook, and a single ACCEPT result
would terminate the rule traversal and cause the packet to be
accepted.
But now firewalld can use nftables for its backend, while libvirt's
firewall rules are still using iptables; iptables rules are still
processed, but at a different time during packet processing
(i.e. during a different hook) than the firewalld nftables rules. The
result is that a packet must be accepted by *BOTH* the libvirt
iptables rules *AND* the firewalld nftable rules in order to be
accepted.
This causes pain because
1) libvirt always adds rules to permit DNS and DHCP (and sometimes
TFTP) from guests to the host network's bridge interface. But
libvirt's bridges are in firewalld's "default" zone (which is usually
the zone called "public"). The public zone allows ssh, but doesn't
allow DNS, DHCP, or TFTP. So even though libvirt's rules allow the
DHCP and DNS traffic, the firewalld rules (now processed during a
different hook) dont, thus guests connected to libvirt's bridges can't
acquire an IP address from DHCP, nor can they make DNS queries to the
DNS server libvirt has setup on the host. (This could be solved by
modifying the default firewalld zone to allow DNS and DHCP, but that
would open *all* interfaces in the default zone to those services,
which is most likely not what the host's admin wants.)
2) Even though libvirt adds iptables rules to allow forwarded traffic
to pass the iptables hook, firewalld's higher level "rich rules" don't
yet have the ability to configure the acceptance of forwarded traffic
(traffic that is going somewhere beyond the host), so any traffic that
needs to be forwarded from guests to the network beyond the host is
rejected during the nftables hook by the default zone's "default
reject" policy (which rejects all traffic in the zone not specifically
allowed by the rules in the zone, whether that traffic is destined to
be forwarded or locally received by the host).
libvirt can't send "direct" nftables rules (firewalld only supports
direct/passthrough rules for iptables), so we can't solve this problem
by just sending explicit nftables rules instead of explicit iptables
rules (which, if it could be done, would place libvirt's rules in the
same hook as firewalld's native rules, and thus eliminate the need for
packets to be accepted by both libvirt's and firewalld's own rules).
However, we can take advantage of a quirk in firewalld zones that have
a default policy of "accept" (meaning any packet that doesn't match a
specific rule in the zone will be *accepted*) - this default accept will
also accept forwarded traffic (not just traffic destined for the host).
Of course we don't want to modify firewalld's default zone in that
way, because that would affect the filtering of traffic coming into
the host from other interfaces using that zone. Instead, we will
create a new zone called "libvirt". The libvirt zone will have a
default policy of accept so that forwarded traffic can pass and list
specific services that will be allowed into the host from guests (DNS,
DHCP, SSH, and TFTP).
But the same default accept policy that fixes forwarded traffic also
causes *all* traffic from guest to host to be accepted. To close this
new hole, the libvirt zone can take advantage of a new feature in
firewalld (currently slated for firewalld-0.7.0) - priorities for rich
rules - to add a low priority rule that rejects all local traffic (but
leaves alone all forwarded traffic).
So, our new zone will start with a list of services that are allowed
(dhcp, dns, tftp, and ssh to start, but configurable via any firewalld
management application, or direct editing of the zone file in
/etc/firewalld/zones/libvirt.xml), followed by a low priority
<reject/> rule (to reject all other traffic from guest to host), and
finally with a default policy of accept (to allow forwarded traffic).
This patch only creates the zonefile for the new zone, and implements
a configure.ac option to selectively enable/disable installation of
the new zone. A separate patch contains the necessary code to actually
place bridge interfaces in the libvirt zone.
Why do we need a configure option to disable installation of the new
libvirt zone? It uses a new firewalld attribute that sets the priority
of a rich rule; this feature first appears in firewalld-0.7.0 (unless
it has been backported to am earlier firewalld by a downstream
maintainer). If the file were installed on a system with firewalld
that didn't support rule priorities, firewalld would log an error
every time it restarted, causing confusion and lots of extra bug
reports.
So we add two new configure.ac switches to avoid polluting the system
logs with this error on systems that don't support rule priorities -
"--with-firewalld-zone" and "--without-firewalld-zone". A package
builder can use these to include/exclude the libvirt zone file in the
installation. If firewalld is enabled (--with-firewalld), the default
is --with-firewalld-zone, but it can be disabled during configure
(using --without-firewalld-zone). Targets that are using a firewalld
version too old to support the rule priority setting in the libvirt
zone file can simply add --without-firewalld-zone to their configure
commandline.
These switches only affect whether or not the libvirt zone file is
*installed* in /usr/lib/firewalld/zones, but have no effect on whether
or not libvirt looks for a zone called libvirt and tries to use it.
NB: firewalld zones can only be added to the permanent config of
firewalld, and won't be loaded/enabled until firewalld is restarted,
so at package install/upgrade time we have to restart firewalld. For
rpm-based distros, this is done in the libvirt.spec file by calling
the %firewalld_restart rpm macro, which is a part of the
firewalld-filesystem package. (For distros that don't use rpm
packages, the command "firewalld-cmd --reload" will have the same
effect).
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Support for firewalld is a feature that can be selectively enabled or
disabled (using --with-firewalld/--without-firewalld), not merely
something that must be accounted for in the code if it is present with
no exceptions. It is more consistent with other usage in libvirt to
use WITH_FIREWALLD rather than HAVE_FIREWALLD.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This adds an additional directive to the dnsmasq configuration file that
notifies clients via dhcp about the link's MTU. Guests can then choose
adjust their link accordingly.
Signed-off-by: Casey Callendrello <cdc@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Historically firewall rules for virtual networks were added straight
into the base chains. This works but has a number of bugs and design
limitations:
- It is inflexible for admins wanting to add extra rules ahead
of libvirt's rules, via hook scripts.
- It is not clear to the admin that the rules were created by
libvirt
- Each rule must be deleted by libvirt individually since they
are all directly in the builtin chains
- The ordering of rules in the forward chain is incorrect
when multiple networks are created, allowing traffic to
mistakenly flow between networks in one direction.
To address all of these problems, libvirt needs to move to creating
rules in its own private chains. In the top level builtin chains,
libvirt will add links to its own private top level chains.
Addressing the traffic ordering bug requires some extra steps. With
everything going into the FORWARD chain there was interleaving of rules
for outbound traffic and inbound traffic for each network:
-A FORWARD -d 192.168.3.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -s 192.168.3.0/24 -i virbr1 -j ACCEPT
-A FORWARD -i virbr1 -o virbr1 -j ACCEPT
-A FORWARD -o virbr1 -j REJECT --reject-with icmp-port-unreachable
-A FORWARD -i virbr1 -j REJECT --reject-with icmp-port-unreachable
-A FORWARD -d 192.168.2.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -s 192.168.2.0/24 -i virbr0 -j ACCEPT
-A FORWARD -i virbr0 -o virbr0 -j ACCEPT
-A FORWARD -o virbr0 -j REJECT --reject-with icmp-port-unreachable
-A FORWARD -i virbr0 -j REJECT --reject-with icmp-port-unreachable
The rule allowing outbound traffic from virbr1 would mistakenly
allow packets from virbr1 to virbr0, before the rule denying input
to virbr0 gets a chance to run.
What we really need todo is group the forwarding rules into three
distinct sets:
* Cross rules - LIBVIRT_FWX
-A FORWARD -i virbr1 -o virbr1 -j ACCEPT
-A FORWARD -i virbr0 -o virbr0 -j ACCEPT
* Incoming rules - LIBVIRT_FWI
-A FORWARD -d 192.168.3.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -o virbr1 -j REJECT --reject-with icmp-port-unreachable
-A FORWARD -d 192.168.2.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -o virbr0 -j REJECT --reject-with icmp-port-unreachable
* Outgoing rules - LIBVIRT_FWO
-A FORWARD -s 192.168.3.0/24 -i virbr1 -j ACCEPT
-A FORWARD -i virbr1 -j REJECT --reject-with icmp-port-unreachable
-A FORWARD -s 192.168.2.0/24 -i virbr0 -j ACCEPT
-A FORWARD -i virbr0 -j REJECT --reject-with icmp-port-unreachable
There is thus no risk of outgoing rules for one network mistakenly
allowing incoming traffic for another network, as all incoming rules
are evalated first.
With this in mind, we'll thus need three distinct chains linked from
the FORWARD chain, so we end up with:
INPUT --> LIBVIRT_INP (filter)
OUTPUT --> LIBVIRT_OUT (filter)
FORWARD +-> LIBVIRT_FWX (filter)
+-> LIBVIRT_FWO
\-> LIBVIRT_FWI
POSTROUTING --> LIBVIRT_PRT (nat & mangle)
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Allow the platform driver impls to run logic before and after the
firewall reload process.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
networkMigrateStateFiles was added nearly 5 years ago when the network
state directory was moved from /var/lib/libvirt to /var/run/libvirt
just prior to libvirt-1.2.4). It was only required to maintain proper
state information for networks that were active during an upgrade that
didn't involve rebooting the host. At this point the likelyhood of
anyone upgrading their libvirt from pre-1.2.4 directly to 5.0.0 or
later *without rebooting the host* is probably so close to 0 that no
properly informed bookie would take *any* odds on it happening, so it
seems appropriate to remove this pointless code.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This introduces a syntax-check script that validates header files use a
common layout:
/*
...copyright header...
*/
<one blank line>
#ifndef SYMBOL
# define SYMBOL
....content....
#endif /* SYMBOL */
For any file ending priv.h, before the #ifndef, we will require a
guard to prevent bogus imports:
#ifndef SYMBOL_ALLOW
# error ....
#endif /* SYMBOL_ALLOW */
<one blank line>
The many mistakes this script identifies are then fixed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
When starting network a macmap object is created (which stores
MAC -> domain name mappings). However, if something goes wrong
(e.g. virNetDevIPCheckIPv6Forwarding() fails) then the object is
leaked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1600468
If we are unable to read leases file (no matter what the reason
is), we return 0 - just like if there were no leases. However,
because we use virFileReadAll() an error is printed into the log.
Note that not all networks have leases file - only those for
which we start dnsmasq.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
With 'switch' we can utilize the compile time enum checks which we can't
rely on with plain 'if' conditions.
Signed-off-by: Shi Lei <shilei.massclouds@gmx.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When libvirtd is restarted, it checks that each guest tap device is
still attached to the bridge device that the configuration info says
it should be connected to. If not, the tap will be disconnected from
[wherever it is] and connected to [wherever it should be].
The previous code that did this did not account for:
1) the IFLA_MASTER attribute in a netdev's ifinfo will be set to
"ovs-system" for any tap device connected to an OVS bridge, *not*
to the name of the bridge it is attached to.
2) virNetDevRemovePort() only works for devices that are attached to a
standard Linux host bridge. If a device is currently attached to an
OVS bridge, then virNetDevOpenvswitchRemovePort() must be called
instead.
This patch remedies those problems, and adds a couple of information
log messages to aid in debugging any future problem.
Resolves: https://bugzilla.redhat.com/1596176
Signed-off-by: Laine Stump <laine@laine.org>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than have virJSONValueArraySize return a -1 when the input
is not an array and then splat an error message, let's check for
an array before calling and then change the return to be a size_t
instead of ssize_t.
That means using the helper virJSONValueIsArray as well as using a
more generic error message such as "Malformed <something> array".
In some cases we can remove stack variables and when we cannot,
those variables should be size_t not ssize_t. Alter a few references
of if (!value) to be if (value == 0) instead as well.
Some callers can already assume an array is being worked on based
on the previous call, so there's less to do.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ensuring that we don't call the virDrvConnectOpen method with a NULL URI
means that the drivers can drop various checks for NULL URIs. These were
not needed anymore since the probe functionality was split
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Declare what URI schemes a driver supports in its virConnectDriver
struct. This allows us to skip trying to open the driver entirely
if the URI scheme doesn't match.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add a localOnly flag to the virConnectDriver struct which allows a
driver to indicate whether it is local-only, or permits remote
connections. Stateful drivers running inside libvirtd are generally
local only. This allows us to remote the check for uri->server != NULL
from most drivers.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we have the ability to easily open connections to secondary
drivers, eg network:///system, it is possible to reimplement the
virDomainNetResolveActualType method in terms of the public API. This
avoids the need to have the network driver provide a callback for it.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The networkDnsmasqConfContents() method is only used by the test suite
and that's only built with WITH_NETWORK is set. So there is no longer
any reason to conditionalize the declaration of this method.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver will call directly into the network driver
impl to modify resolve the atual type of NICs with type=network. It
has todo this before it has allocated the actual NIC. This introduces
a callback system to allow us to decouple the QEMU driver from the
network driver.
This is a short term step, as it ought to be possible to achieve the
same end goal by simply querying XML via the public network API. The
QEMU code in question though, has no virConnectPtr conveniently
available at this time.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU driver calls into the network driver to get the first IP
address of the network. This information is readily available via the
formal public API by fetching the XML doc and then parsing it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver will call directly into the network driver
impl to modify network device bandwidth for interfaces with
type=network. This introduces a callback system to allow us to decouple
the QEMU driver from the network driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently virt drivers will call directly into the network driver impl
to allocate domain interface devices where type=network. This introduces
a callback system to allow us to decouple the virt drivers from the
network driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Allow the possibility of opening a connection to only the network
driver, by defining network:///system and network:///session URIs
and registering a fake hypervisor driver that supports them.
The hypervisor drivers can now directly open a network driver
connection at time of need, instead of having to pass around a
virConnectPtr through many functions. This will facilitate the later
change to support separate daemons for each driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
By convention the last thing in the driver.c files should be the driver
callback table and function to register it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
VM drivers may need to store additional private data to the status XML
so that it can be restored after libvirtd restart. Since not everything
is needed add a callback infrastructure, where VM drivers can add only
stuff they need.
Note that the private data is formatted as a <privateData> sub-element
of the <disk> or <backingStore> <source> sub-element. This is done since
storing it out of band (in the VM private data) would require a complex
matching process to allow to put the data into correct place.
There were a bunch of commentary blocks that were literally useless in
terms of describing what the code following them does, since most of
them were documenting "the obvious" or it just wouldn't help at all.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Similarly to previous patch, for some types of interface domain
and host are on the same side of RX/TX barrier. In that case, we
need to set up the QoS differently. Well, swapped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Back in the day when I was implementing QoS for networks there
were no self inflating virBitmaps. Only the static ones.
Therefore, I had to allocate the whole 8KB of memory in order to
keep track of used/unused class IDs. This is rather wasteful
because nobody is ever gonna use that much classes (kernel
overhead would drastically lower the bandwidth). Anyway, now that
we have self inflating bitmaps we can start small and allocate
more if there's need for it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
To be consistent with the API definition, use the @maxnames instead
of @nnames when describing/comparing against the maximum names to
be provided for the *ConnectList[Defined]Networks APIs.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation to privatize the virNetworkObj - create an accessor function
to get the current @persistent value. Also change the value to a bool rather
than an unsigned int (since that's how it's generated anyway).
Signed-off-by: John Ferlan <jferlan@redhat.com>
In order to privatize the virNetworkObj create accessors in virnetworkobj
in order to handle the get/set of the active value.
Also rather than an unsigned int, convert it to a boolean to match other
drivers representation and the reality of what it is.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation for making the object private, create a couple of API's
to get the obj->def & obj->newDef and set the obj->def.
While altering networkxml2conftest.c to use the virNetworkObjSetDef
API, fix the name of the variable from @dev to @def
Signed-off-by: John Ferlan <jferlan@redhat.com>
Change the variable name to be a bit more descriptive and less confusing
when used with the data.network.actual->class_id.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation for making the object private, create/use a couple of API's
to get/set the obj->dnsmasqPid and obj->radvdPid.
NB: Since the pid's can sometimes changed based on intervening functions,
be sure to always fetch the latest value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation for having a private virNetworkObj - let's create/move some
API's that handle the obj->macmap. The API's will be renamed to have a
virNetworkObj prefix to follow conventions and the arguments slightly
modified to accept what's necessary to complete their task.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move networkMacMgrFileName into src/util/virmacmap.c and rename to
virMacMapFileName. We're about to move some more MacMgr processing
files into virnetworkobj and it doesn't make sense to have this helper
in the driver or in virnetworkobj.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Modify code to have two spaces between functions, follow function more
recent function formatting w/r/t args per line and function return type
and name on separate lines.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If a remote call fails during event registration (more than likely from
a network failure or remote libvirtd restart timed just right), then when
calling the virObjectEventStateDeregisterID we don't want to call the
registered @freecb function because that breaks our contract that we
would only call it after succesfully returning. If the @freecb routine
were called, it could result in a double free from properly coded
applications that free their opaque data on failure to register, as seen
in the following details:
Program terminated with signal 6, Aborted.
#0 0x00007fc45cba15d7 in raise
#1 0x00007fc45cba2cc8 in abort
#2 0x00007fc45cbe12f7 in __libc_message
#3 0x00007fc45cbe86d3 in _int_free
#4 0x00007fc45d8d292c in PyDict_Fini
#5 0x00007fc45d94f46a in Py_Finalize
#6 0x00007fc45d960735 in Py_Main
#7 0x00007fc45cb8daf5 in __libc_start_main
#8 0x0000000000400721 in _start
The double dereference of 'pyobj_cbData' is triggered in the following way:
(1) libvirt_virConnectDomainEventRegisterAny is invoked.
(2) the event is successfully added to the event callback list
(virDomainEventStateRegisterClient in
remoteConnectDomainEventRegisterAny returns 1 which means ok).
(3) when function remoteConnectDomainEventRegisterAny is hit,
network connection disconnected coincidently (or libvirtd is
restarted) in the context of function 'call' then the connection
is lost and the function 'call' failed, the branch
virObjectEventStateDeregisterID is therefore taken.
(4) 'pyobj_conn' is dereferenced the 1st time in
libvirt_virConnectDomainEventFreeFunc.
(5) 'pyobj_cbData' (refered to pyobj_conn) is dereferenced the
2nd time in libvirt_virConnectDomainEventRegisterAny.
(6) the double free error is triggered.
Resolve this by adding a @doFreeCb boolean in order to avoid calling the
freeCb in virObjectEventStateDeregisterID for any remote call failure in
a remoteConnect*EventRegister* API. For remoteConnect*EventDeregister* calls,
the passed value would be true indicating they should run the freecb if it
exists; whereas, it's false for the remote call failure path.
Patch based on the investigation and initial patch posted by
fangying <fangying1@huawei.com>.
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
If the network isn't active during networkNotifyActualDevice(), we
would log an error message stating that the bridge device didn't
exist. This patch adds a check to see if the network is active, making
the logs more useful in the case that it isn't.
Partially resolves: https://bugzilla.redhat.com/1442700
Nothing that could happen during networkNotifyActualDevice() could
justify unceremoniously killing the qemu process, but that's what we
were doing.
In particular, new code added in commit 85bcc022 (first appearred in
libvirt-3.2.0) attempts to reattach tap devices to their assigned
bridge devices when libvirtd restarts (to make it easier to recover
from a restart of a libvirt network). But if the network has been
stopped and *not* restarted, the bridge device won't exist and
networkNotifyActualDevice() will fail.
This patch changes networkNotifyActualDevice() and
qemuProcessNotifyNets() to return void, so that qemuProcessReconnect()
will soldier on regardless of what happens (any errors will still be
logged though).
Partially resolves: https://bugzilla.redhat.com/1442700
This patch makes use of the virNetDevSetCoalesce() function to make
appropriate settings effective for devices that support them.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1414627
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Use "virNetworkObj" as a prefix for any external API in virnetworkobj.
Also a couple of functions were local to virnetworkobj.c, so remove their
external defs in virnetworkobj.h.
Rename the API to be a better description of what it does. Besides, a
subsequent patch will rename virNetworkAssignDef to virNetworkObjAssignDef
so rather than make that patch confusing we'll take the intermittent step
in this patch.
Move all the virNetworkObj related API/data structures into their own
modules virnetworkobj.{c,h} from the network_conf.{c,h}
Purely code motion at this point plus adjustments to cleanly build
The virMacMap module is there for dumping [domain, <list of is
MACs>] pairs into a file so that libvirt_guest NSS module can use
it. Whenever a interface is allocated from network (e.g. on
domain<F2> startup or NIC hotplug), network is notified and so is
virMacMap module subsequently. The module update functions
networkMacMgrAdd() and networkMacMgrDel() gracefully handle the
case when there's no module. The problem is, the module is
created if and only if network is freshly started, or if the
daemon restarts and network previously had the module.
This is not very user friendly - if users want to use the NSS
module they need to destroy their network and bring it up again
(and subsequently all the domains using it).
One disadvantage of this approach implemented here is that one
may get just partial results: any already running network does
not record mac maps, thus only newly plugged domains will be
stored in the module. The network restart scenario is not touched
by this of course. But one can argue that older libvirts had
never recorded the mac maps anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1434882
Imagine the following scenario:
1) virsh net-start default
2) virsh start myFavouriteDomain
3) virsh net-destroy default
4) virsh destroy myFavouriteDomain
(assuming myFavouriteDomain has an interface from default
network)
Regardless of how unlikely this scenario looks like, we should
not crash. The problem is, on net-destroy in
networkShutdownNetworkVirtual() the virMacMap module is unrefed,
but the stale pointer is kept around. Thus when the domain
destroy procedure comes in, networkReleaseActualDevice() and
subsequently networkMacMgrDel() is called. This function sees the
stale pointer and starts calling the virMacMap module APIs which
work over freed memory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This adds a few validations to the devices listed for a hostdev network:
* devices must be listed by PCI address, not by netdev name
* listing a device by PCI address is valid only for hostdev networks, not
for other types of network (e.g. macvtap passthrough).
* each device in a hostdev pool must be an SR-IOV VF
Resolves: https://bugzilla.redhat.com/1004676
commit 00d28a78 added a check to see if there were any IPv6 routes
added by RA (Router Advertisement) via an interface that had accept_ra
set to something other than "2". The check was being done
unconditionally, but it's only relevant if IPv6 forwarding is going to
be turned on, and that will only happen if the network has an IPv6
address.
The prototype requires a NONNULL argument and the only caller passes in
a non-null parameter. Besides the "else if" condition would deref it anyway.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If a network is destroyed and restarted, or its bridge is changed, any
tap devices that had previously been connected to the bridge will no
longer be connected. As a first step in automating a reconnection of
all tap devices when this happens, this patch modifies
networkNotifyActualDevice() (which is called once for every
<interface> of every active domain whenever libvirtd is restarted) to
reconnect any tap devices that it finds disconnected.
With this patch in place, you will need to restart libvirtd to
reconnect all the taps to their proper bridges. A future patch will
add a callback that hypervisor drivers can register with the network
driver to that the network driver can trigger this behavior
automatically whenever a network is started.
When enabling IPv6 on all interfaces, we may get the host Router
Advertisement routes discarded. To avoid this, the user needs to set
accept_ra to 2 for the interfaces with such routes.
See https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt
on this topic.
To avoid user mistakenly losing routes on their hosts, check
accept_ra values before enabling IPv6 forwarding. If a RA route is
detected, but neither the corresponding device nor global accept_ra
is set to 2, the network will fail to start.
It was pointed out here:
https://bugzilla.redhat.com/show_bug.cgi?id=1331796#c4
that we shouldn't be adding a "no-resolv" to the dnsmasq.conf file for
a network if there isn't any <forwarder> element that specifies an IP
address but no qualifying domain. If there is such an element, it will
handle all DNS requests that weren't otherwise handled by one of the
forwarder entries with a matching domain attribute. If not, then DNS
requests that don't match the domain of any <forwarder> would not be
resolved if we added no-resolv.
So, only add "no-resolv" when there is at least one <forwarder>
element that specifies an IP address but no qualifying domain.
In GCC 7 there is a new warning triggered when a switch
case has a conditional statement (eg if ... else...) and
some of the code paths fallthrough to the next switch
statement. e.g.
conf/domain_conf.c: In function 'virDomainChrEquals':
conf/domain_conf.c:14926:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (src->targetTypeAttr != tgt->targetTypeAttr)
^
conf/domain_conf.c:14928:5: note: here
case VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE:
^~~~
conf/domain_conf.c: In function 'virDomainChrDefFormat':
conf/domain_conf.c:22143:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (def->targetTypeAttr) {
^
conf/domain_conf.c:22151:5: note: here
default:
^~~~~~~
GCC introduced a __attribute__((fallthrough)) to let you
indicate that this is intentionale behaviour rather than
a bug.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virNetDevTapCreateInBridgePort() has always set the new tap device to
the current MTU of the bridge it's being attached to. There is one
case where we will want to set the new tap device to a different
(usually larger) MTU - if that's done with the very first device added
to the bridge, the bridge's MTU will be set to the device's MTU. This
patch allows for that possibility by adding "int mtu" to the arg list
for virNetDevTapCreateInBridgePort(), but all callers are sending -1,
so it doesn't yet have any effect.
Since the requested MTU isn't necessarily what is used in the end (for
example, if there is no MTU requested, the tap device will be set to
the current MTU of the bridge), and the hypervisor may want to know
the actual MTU used, we also return the actual MTU to the caller (if
actualMTU is non-NULL).
After 478ddedc12 a bug is fixed where we wrongly presumed loopack
device name on non-Linux systems. It's lo0. However, the fix is
not reflected in the tests which are failing now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Similarly to localOnly DNS domain, localPtr attribute can be used to
tell the DNS server not to forward reverse lookups for unknown IPs which
belong to the virtual network.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Now that we have a module that's able to track
<domain, mac addres list> pairs, hook it up into
our network driver.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are couple of places where we have a string and want to
save it to a file. Atomically. In all those places we use
virFileRewrite() but also implement the very same callback which
takes the string and write it into temp file. This makes no
sense. Unify the callbacks and move them to one place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In dd7bfb2cdc I've removed locking of the network driver upon
it's allocation. However, I forgot to remove one location of the
driver unlock.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
commit 9065cfaa added the ability to disable DNS services for a
libvirt virtual network. If neither DNS nor DHCP is needed for a
network, then we don't need to start dnsmasq, so code was added to
check for this.
Unfortunately, it was written with a great lack of attention to detail
(I can say that, because I was the author), and the loop that checked
if DHCP is needed for the network would never end if the network had
multiple IP addresses and the first <ip> had no <dhcp> subelement
(which would have contained a <range> or <host> subelement, thus
requiring DHCP services).
This patch rewrites the check to be more compact and (more
importantly) finite.
This bug was present in release 2.2.0 and 2.3.0, so will need to be
backported to any relevant maintainence branches.
Reported here:
https://www.redhat.com/archives/libvirt-users/2016-October/msg00032.htmlhttps://www.redhat.com/archives/libvirt-users/2016-October/msg00045.html
New line character in name of network is now forbidden because it
mess virsh output and can be confusing for users. Validation of
name is done in network driver, after parsing XML to avoid
problems with disappeared network which was already created with
new-line char in name.
Closes-Bug: https://bugzilla.redhat.com/show_bug.cgi?id=818064
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The dnsmasq man page recommends that dhcp-authoritative "should be
set when dnsmasq is definitely the only DHCP server on a network".
This is the case for libvirt-managed virtual networks.
The effect of this is that VMs that fail to renew their DHCP lease
in time (e.g. if the VM or host is suspended) will be able to
re-acquire the lease even if it's expired, unless the IP address has
been taken by some other host. This avoids various annoyances caused
by changing VM IP addresses.
For some unknown reason the original implementation of the <forwarder>
element only took advantage of part of the functionality in the
dnsmasq feature it exposes - it allowed specifying the ip address of a
DNS server which *all* DNS requests would be forwarded to, like this:
<forwarder addr='192.168.123.25'/>
This is a frontend for dnsmasq's "server" option, which also allows
you to specify a domain that must be matched in order for a request to
be forwarded to a particular server. This patch adds support for
specifying the domain. For example:
<forwarder domain='example.com' addr='192.168.1.1'/>
<forwarder domain='www.example.com'/>
<forwarder domain='travesty.org' addr='10.0.0.1'/>
would forward requests for bob.example.com, ftp.example.com and
joe.corp.example.com all to the DNS server at 192.168.1.1, but would
forward requests for travesty.org and www.travesty.org to
10.0.0.1. And due to the second line, requests for www.example.com,
and odd.www.example.com would be resolved by the libvirt network's own
DNS server (i.e. thery wouldn't be immediately forwarded) even though
they also match 'example.com' - the match is given to the entry with
the longest matching domain. DNS requests not matching any of the
entries would be resolved by the libvirt network's own DNS server.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1331796
If you define a libvirt virtual network with one or more IP addresses,
it starts up an instance of dnsmasq. It's always been possible to
avoid dnsmasq's dhcp server (simply don't include a <dhcp> element),
but until now it wasn't possible to avoid having the DNS server
listening; even if the network has no <dns> element, it is started
using default settings.
This patch adds a new attribute to <dns>: enable='yes|no'. For
backward compatibility, it defaults to 'yes', but if you don't want a
DNS server created for the network, you can simply add:
<dns enable='no'/>
to the network configuration, and next time the network is started
there will be no dns server created (if there is dhcp configuration,
dnsmasq will be started with "port=0" which disables the DNS server;
if there is no dhcp configuration, dnsmasq won't be started at all).
The new forward mode 'open' is just like mode='route', except that no
firewall rules are added to assure that any traffic does or doesn't
pass. It is assumed that either they aren't necessary, or they will be
setup outside the scope of libvirt.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=846810
IPv6 RA always contains an implicit default route via
the link-local address of the source of RA. This forces
the guest to install a route via isolated network, which
may disturb the guest's networking in case of multiple interfaces.
More info in 013427e6e7.
The validity of this route is controlled by "default [route] lifetime"
field of RA. If the lifetime is set to 0 seconds, then no route
is installed by receiver.
dnsmasq 2.67+ supports "ra-param=<interface>,<RA interval>,<default
lifetime>" option. We pass "ra-param=*,0,0"
(here, RA_interval=0 means default) to disable default gateway in RA
for isolated networks.
These functions all need to be called from a utility function that
must be located in the util directory, so we move them all into
util/virnetdevip.[ch] now that it exists.
Function and struct names were appropriately changed for the new
location, but all code is unchanged aside from motion and renaming.
This patch splits virnetdev.[ch] into multiple files, with the new
virnetdevip.[ch] containing all the functions related to setting and
retrieving IP-related info for a device (both addresses and routes).
I'm tired of mistyping this all the time, so let's do it the same all
the time (similar to how we changed all "Pci" to "PCI" awhile back).
(NB: I've left alone some things in the esx and vbox drivers because
I'm unable to compile them and they weren't obviously *not* a part of
some API. I also didn't change a couple of variables named,
e.g. "somethingIptables", because they were derived from the name of
the "iptables" command)