It was too similar to the non-scaled alternative.
before:
error: Numeric value 'abc' for <size> option is malformed or out of range
after:
error: Scaled numeric value 'abc' for <size> option is malformed or out of range
This patch adds new xml element, and so we can have the option of
also having perf events enabled immediately at startup.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-6-git-send-email-qiaowei.ren@intel.com
This patch adds support for "vpindex", "runtime", "synic",
"stimer", and "vendor_id" features available in qemu 2.5+.
- When Hyper-V "vpindex" is on, guest can use MSR HV_X64_MSR_VP_INDEX
to get virtual processor ID.
- Hyper-V "runtime" enlightement feature allows to use MSR
HV_X64_MSR_VP_RUNTIME to get the time the virtual processor consumes
running guest code, as well as the time the hypervisor spends running
code on behalf of that guest.
- Hyper-V "synic" stands for Synthetic Interrupt Controller, which is
lapic extension controlled via MSRs.
- Hyper-V "stimer" switches on Hyper-V SynIC timers MSR's support.
Guest can setup and use fired by host events (SynIC interrupt and
appropriate timer expiration message) as guest clock events
- Hyper-V "reset" allows guest to reset VM.
- Hyper-V "vendor_id" exposes hypervisor vendor id to guest.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
This test was commited 4 years ago, but was never enabled in
storagepoolxml2xmltest.c. This patch reactivates it, conditionnaly on RBD
storage support being enabled
This test failed for two reasons:
* The uuid was missing from the input file
* The output file had the <name> in a different place from the actual output
If the abs_builddir path already is in PATH and it's in the first
position, due to a bug in our code PATH would be cleared out.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Coverity pointed out that getenv("PATH") may return NULL. Well,
we check for that in virFindFileInPath() too. If this happens, we
will pass NULL into strstr(). Ouch.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The variable is dereferenced prior its check for NULL. The check
itself does not make much sense anyway - it's our test, we know
we are not passing NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The test can return positive value even though it should have failed. It just
returns the value parser returned, which should be flipped back to -1 if
something went wrong or the result was unexpected, but it isn't.
After 9c17d665fd the tap device for ethernet network type is
automatically precreated before spawning qemu. Problem is, the
qemuxml2argvtest wasn't updated and thus is failing. Because of
all the APIs that new code is calling, I had to mock a lot. Also,
since the tap FDs are labeled separately from the rest of the
devices/files I had to enable NOP security driver for the test
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When constructing SCSI hostdev command line for qemu, the
/sys/bus/scsi/devices/... dir is scanned. Unfortunately, even in
the tests. This is needed to determine the name of SCSI device to
passthrough to qemu, because in the domain XML we were given its
address instead. Anyway, we should not be touching live system
data in our test suite as it produced unpredictable results. The
test is regressing from 1e9a083742 on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Ensure the code behaves properly even for situations that were not
being considered before, such as simply detaching devices from the
host without attaching them to a guest and attaching devices as
managed even though they had already been manually detached from
the host.
Update testutilsqemu to overwrite libDir and channelTargetDir and set
private paths using domain's privateData. This changes is required for
following patch.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Move all code that checks host and domain. Do not check host if we use
VIR_QEMU_PROCESS_START_PRETEND flag.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Problem is that in the test any status file matching
tests/nssdata/*.status is loaded as it contains IP addresses that
are parsed. However, there's no order specified in which the
files are loaded. Therefore on different systems the order may be
different. This is then producing an unexpected results.
Instead of defining an order in which the files are loaded, make
the code that checks for missing IP addresses (or redundant ones)
cope with unordered list of addresses. The reasoning behind is
that the code doing the parsing is used in real NSS module where
we don't care for ordering.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
hap is enabled by default in xm and xl config and usually only
specified when it is desirable to disable hap (hap = 0). Change
the xm,xl <-> xml converter to behave similarly. I.e. only
produce 'hap = 0' when <hap state='off'/> and vice versa.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This allows setting the address in host and/or network order and makes
the naming consistent. Now you don't need to call [hn]to[nh]l()
functions as that is taken care of by these functions. Also, now
the *NetOrder take the address in network order, the other functions in
host order so the naming and usage is consistent. Some places were
having the address in network order and calling ntohl() just so the
original function can call htonl() again. This makes it nicer to read.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If a <graphics type='spice'> has no port nor tlsPort set, the generated
QEMU command line will contain -spice port=0.
This is later going to be ignored by spice-server, but it's better not
to add it at all in this situation.
As an empty -spice is not allowed, we still need to append port=0 if we
did not add any other argument.
Even if nss is disabled, the build system tries to build some
targets like libnss_libvirt_impl.la and nsstest. Hide those
under the "if WITH_NSS" block like the rest of NSS plugin bits.
If we expose this information, which is one byte in every PCI config
file, we let all mgmt apps know whether the device itself is an endpoint
or not so it's easier for them to decide whether such device can be
passed through into a VM (endpoint) or not (*-bridge).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1317531
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The only purpose of this test is to catch possible linking
problems with libnss_libvirt.so.2.
One of the problems I faced was that the NSS plugin was unloaded
immediately after it got loaded and the name resolution process
continued with next configured option. Without any error. It was
very hard to debug why until I created this simple test and found
out immediately that there were some symbols missing. The reason
why problem was not caught in nsstest is that in the test we want
to use all the fancy stuff and therefore link it with libvirt.la.
So even if there's a symbol missing in the NSS plugin it will be
found in the libvirt.la.
But even after I resolved the issue we still need this test
because files the NSS plugin is built from are still live (mostly
those under utils/ dir). So as they change new symbol might be
required which would render the NSS plugin unusable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The implementation is pretty straightforward. Moreover, because
of the nature of things, gethostbyname_r and gethostbyname2_r can
be implemented at the same time too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
None of the existing domXML configs under tests/* specify a
default cache mode since default generally means "use the
hypervisor default" and is left unset by the various hypervisor
drivers. Add a config to tests/domainschemadata that specifies
cache='default'.
Currently we spawn couple of binaries in our test suite.
Moreover, we provide some spoofed versions of system binaries
hoping that those will be executed instead of the system ones.
For instance, for testing SSH socket we have written our own ssh
binary for producing predictable results. We certainly don't want
to execute the system ssh binary.
However, in order to prefer our binaries over system ones, we
need to set PATH environment variable. But this is done only at
the Makefile level. So if anybody runs a test by hand that
expects our spoofed binary, the test ends up executing real
system binaries. This is not good. In fact, it's terribly wrong.
The fix lies in a small trick - putting our build directory at
the beginning of the PATH environment variable in each test.
Hopefully, since every test has this VIRT_TEST_MAIN* wrapper, we
can fix this at a single place.
Moreover, while this removes setting PATH for our tests written
in bash, it's safe as we are not calling anything ours that would
require PATH change there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We include the file in plenty of places. This is mostly due to
historical reasons. The only place that needs something from the
header file is storage_backend_fs which opens _PATH_MOUNTED. But
it gets the file included indirectly via mntent.h. At no other
place in our code we need _PATH_.*. Drop the include and
configure check then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Patch adds a generic DO_TEST_FULL macro, some PASS/FAIL macros to better
visually distinguish tests that should fail and tests that should pass. Also,
some cosmetic changes like renames and direct call to fprintf is replaced with
our VIR_TEST_DEBUG macro, as using testutils should be our preferred way of
reporting errors in tests.
Since servers know their name, there is no need to supply such
information twice. Also defeats inconsistencies.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
At first I did not want to do this, but after trying to implement some
newer feaures in the admin API I realized we need that to make our lives
easier. On the other hand they are not saved redundantly and the
virNetServer objects are still kept in a hash table.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When debug-threads is enabled, individual threads are given a separate
name (on Linux)
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1140121
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU (somewhere around 2.0) added a new sub-option to the -name flag
-name debug-threads=on.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If use of virtlogd is enabled, then use it for backing the
character device log files too. This avoids the possibility
of a guest denial of service by writing too much data to
the log file.
Honour the <log file='...'/> element in chardevs to output
data to a file. This requires QEMU >= 2.6
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'actualCount' variable, formerly just 'count', is only used
internally by the macro, so it's better to move its declaration
inside the macro as well: this way, it doesn't have to be declared
by every single user.
The new name is less generic to make clashes less likely.
When checking the number of devices added to a device list, use the
nhostdevs variable instead of its value, so that the test can keep
working even if more hostdevs are added.
This attribute is used to extend secondary PCI bar and expose it to the
guest as 64bit memory. It works like this: attribute vram is there to
set size of secondary PCI bar and guest sees it as 32bit memory,
attribute vram64 can extend this secondary PCI bar. If both attributes
are used, guest sees two memory bars, both address the same memory, with
the difference that the 32bit bar can address only the first part of the
whole memory.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260749
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We always place primary video device at first place, to make it easier
to create a qemu command or format an xml, but we should also set the
primary boolean for primary video device to 'true'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When there isn't a ssh -X type session running and a user has not
been added to the libvirt group, attempts to run 'virsh -c qemu:///system'
commands from an otherwise unprivileged user will fail with rather
generic or opaque error message:
"error: authentication failed: no agent is available to authenticate"
This patch will adjust the error code and message to help reflect the
situation that the problem is the requested mechanism is UNAVAILABLE and
a slightly more descriptive error. The result on a failure then becomes:
"error: authentication unavailable: no polkit agent available to
authenticate action 'org.libvirt.unix.manage'"
A bit more history on this - at one time a failure generated the
following type message when running the 'pkcheck' as a subprocess:
"error: authentication failed: polkit\56retains_authorization_after_challenge=1
Authorization requires authentication but no agent is available."
but, a patch was generated to adjust the error message to help provide
more details about what failed. This was pushed as commit id '96a108c99'.
That patch prepended a "polkit: " to the output. It really didn't solve
the problem, but gave a hint.
After some time it was deemed using DBus API calls directly was a
better way to go (since pkcheck calls them anyway). So, commit id
'1b854c76' (more or less) copied the code from remoteDispatchAuthPolkit
and adjusted it. Then commit id 'c7542573' adjusted the remote.c
code to call the new API (virPolkitCheckAuth). Finally, commit id
'308c0c5a' altered the code to call DBus APIs directly. In doing
so, it reverted the failing error message to the generic message
that would have been received from DBus anyway.
Add Spice graphics gl attribute. qemu 2.6 should have -spice gl=on argument to
enable opengl rendering context (patches on the ML). This is necessary to
actually enable virgl rendering.
Add a qemuxml2argv test for virtio-gpu + spice with virgl.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Per-domain directories were introduced in order to be able to
completely separate security labels for each domain (commit
f1f68ca334). However when the domain
name is long (let's say a ridiculous 110 characters), we cannot
connect to the monitor socket because on length of UNIX socket address
is limited. In order to get around this, let's shorten it in similar
fashion and in order to avoid conflicts, throw in an ID there as well.
Also save that into the status XML and load the old status XMLs
properly (to clean up after older domains). That way we can change it
in the future.
The shortening can be seen in qemuxml2argv tests, for example in the
hugepages-pages2 case.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit f1a89a8 allowed parsing configs from /etc/libvirt
without validating the emulator capabilities.
Check for the presence of a machine type in the qemu driver's
post parse function instead of crashing.
https://bugzilla.redhat.com/show_bug.cgi?id=1267256
There's been a report on the upstream list [1] describing we
access /sys/devices/system/cpu/present directly on the host from
within our test suite. This may end up in unpredictable results
as no all linux systems are required to have that file. Mock
access to the file.
libvirt.git/tests $ ../run strace vircgrouptest
...
access("/sys/devices/system/cpu/present", F_OK) = 0
...
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Yet again, selinux has been adding const-correctness; this change
is ABI-compatible, but breaks API, which affects us when we try to
override things in our testsuite:
../../tests/securityselinuxhelper.c:307:24: error: conflicting types for 'selabel_open'
struct selabel_handle *selabel_open(unsigned int backend,
^~~~~~~~~~~~
In file included from ../../tests/securityselinuxhelper.c:32:0:
/usr/include/selinux/label.h:73:24: note: previous declaration of 'selabel_open' was here
The problem is a new 'const' prior to the second parameter.
Fix it the same way we did in commit 292d3f2d: check for the new
const at configure time.
Signed-off-by: Eric Blake <eblake@redhat.com>
The target= setting in xl disk configuration can be used to encode
meta info that is meaningful to a backend. Leverage this fact to
support qdisk network disk types such as rbd. E.g. <disk> config
such as
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='rbd' name='pool/image'>
<host name='mon1.example.org' port='6321'/>
<host name='mon2.example.org' port='6322'/>
<host name='mon3.example.org' port='6322'/>
</source>
<target dev='hdb' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='1'/>
</disk>
can be converted to the following xl config (and vice versa)
disk = [ "format=raw,vdev=hdb,access=rw,backendtype=qdisk,
target=rbd:pool/image:auth_supported=none:mon_host=mon1.example.org\\:6321\\;mon2.example.org\\:6322\\;mon3.example.org\\:6322"
]
Note that in xl disk config, a literal backslash in target= must
be escaped with a backslash. Conversion of <auth> config is not
handled in this patch, but can be done in a follow-up patch.
Also add a test for the conversions.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The most formal form of xl disk configuration uses key=value
syntax to define each configuration item, e.g.
format=raw, vdev=xvda, access=rw, backendtype=phy, target=disksrc
Change the xl disk formatter to produce this syntax, which allows
target= to contain meta info needed to setup a network-based
disksrc (e.g. rbd, nbd, iscsi). For details on xl disk config
format, see $xen-src/docs/misc/xl-disk-configuration.txt
Update the disk config in the tests to use the formal syntax.
But add tests to ensure disks specified with the positional
parameter syntax are correctly converted to <disk> XML.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This does nothing more than adding the new device and capability.
The device is present since QEMU 2.6.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
PostParse handles it for us now.
This causes some test suite churn; qemu's custom PostParse could is
now invoked before the generic AddImplicitControllers, so PCI
controllers end up sequentially in the XML before the generically
added IDE controllers. So it's just some XML reordering
Seems like the natural fit, since we are already adding other XML bits
in the PostParse routine.
Previously AddImplicitControllers was only called at the end of XML
parsing, meaning code that builds a DomainDef by hand had to manually
call it. Now those PostParse callers get it for free.
There's some test churn here; xen xm and sexpr test suite bits weren't
calling this before, but now they are, so you'll see new IDE controllers.
I don't think this will cause problems in practice, since the code already
needs to handle these implicit controllers like in the case when a user
defines their own XML.
Since commit 51045df01b, the QEMU_CAPS_DEVICE capability is enabled
automatically and shouldn't be passed as an argument to DO_TEST();
however, commit 998a936c4c accidentally introduced few such uses.
This was only used for test 'xml blanking', which has now all
been removed, and isn't an ideal paradigm anyways since it
inhibits easy XML regeneration.
The memory XML blanking is only there to avoid the unit= churn that
was added by default a long time ago.
Drop the blanking, switch over to using the standard comparison
helpers, and regenerate the output with VIR_TEST_REGENERATE_OUTPUT.
If a qemuargv has iscsi or ceph secrets on the command line, we will
convert that to XML like:
<auth username='myname'>
<secret type='iscsi'/>
</auth>
This is not valid XML, as either a UUID or usage must be specified in
the secret block. It's not clear though how the argv2xml code can do
anything correct here, since XML like this requires a libvirt secret
object to have already been defined.
The current test suite handles this by blanking out any <secret> block
in the XML. This avoids domainschematest failures.
Instead of blanking, let's hardcode a usage= name. This lets us test
the other bits of generated <secret> XML, and is a step towards wiring
up VIR_TEST_REGENERATE_OUTPUT
Since the daemon can manage and add (at fresh start) multiple servers,
we also should be able to add them from a JSON state file in case of a
daemon restart, so post exec restart support for multiple servers is also
provided. Patch also updates virnetdaemontest accordingly.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The method will now return 0 on success and -1 on error, rather than number of
items which it iterated over before it returned back to the caller. Since the
only place where we actually check the number of elements iterated is in
virhashtest, return value of 0 and -1 can be a pretty accurate hint that it
iterated over all the items. However, if we really want to know the number of
items iterated over (like virhashtest does), a counter has to be provided
through opaque data to each iterator call. This patch adjusts return value of
virHashForEach, refactors the body, so it returns as soon as one of the
iterators fail and adjusts virhashtest to reflect these changes.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Our existing virHashForEach method iterates through all items disregarding the
fact, that some of the iterators might have actually failed. Errors are usually
dispatched through an error element in opaque data which then causes the
original caller of virHashForEach to return -1. In that case, virHashForEach
could return as soon as one of the iterators fail. This patch changes the
iterator return type and adjusts all of its instances accordingly, so the
actual refactor of virHashForEach method can be dealt with later.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Test all kinds of scenarios, including guests asking for GIC but
failing to specify a version, guests specifying an invalid version
and guests trying to use GIC with non-virt or even non-ARM machines.
Unify the naming to prepare for new test cases that will be added
later on.
Convert a couple of output XML files for the qemuxml2xml test to
symlinks while at it, since they were identical to the corresponding
input XML files anyways.
Moreover, since we're only interested in testing GIC support here,
simplify XML files by getting rid of the unrelevant bits.
After the rework of mocking of our tests there's the
virportallocator test failing to link on mingw. Well, it's the
mocking library actually:
../gnulib/lib/.libs/libgnu.a(bind.o): In function `rpl_bind':
/home/jenkins/libvirt-mingw/build32/gnulib/lib/../../../gnulib/lib/bind.c:33: multiple definition of `rpl_bind'
.libs/virportallocatormock_la-virportallocatormock.o:/home/jenkins/libvirt-mingw/build32/tests/../../tests/virportallocatormock.c:79: first defined here
I've no idea why this matters to mingw and does not to others.
Nevertheless, if we make the test linux only the problem goes
away.
Apparently, our test for RTLD_NEXT is not sufficient because
mingw32 defines it. Lets put aside for a while fact that it has
the same value as RTLD_DEFAULT which by description has different
meaning, shall we?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Mock libraries should not be linked against libvirt, but some of
them did - fix that.
On the other hand, not linking against gnulib can cause build
failures on mingw, so define a new $(MOCKLIBS_LIBS) variable and
use it everywhere.
The virportallocatortest.c file is compiled both as a test case
and as a mock library; in the latter case, it can't use
VIR_FORCE_CLOSE() because mock libraries are not linked against
libvirt.
Replace VIR_FORCE_CLOSE() with plain close() to solve the issue.
Apparently we are not the only ones with dumb free functions
because dbus_message_unref() does not accept NULL either. But if
I were to vote, this one is even more evil. Instead of returning
an error just like we do it immediately dereference any pointer
passed and thus crash you app. Well done DBus!
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f878ebda700 (LWP 31264)]
0x00007f87be4016e5 in ?? () from /usr/lib64/libdbus-1.so.3
(gdb) bt
#0 0x00007f87be4016e5 in ?? () from /usr/lib64/libdbus-1.so.3
#1 0x00007f87be3f004e in dbus_message_unref () from /usr/lib64/libdbus-1.so.3
#2 0x00007f87bf6ecf95 in virSystemdGetMachineNameByPID (pid=9849) at util/virsystemd.c:228
#3 0x00007f879761bd4d in qemuConnectCgroup (driver=0x7f87600a32a0, vm=0x7f87600c7550) at qemu/qemu_cgroup.c:909
#4 0x00007f87976386b7 in qemuProcessReconnect (opaque=0x7f87600db840) at qemu/qemu_process.c:3386
#5 0x00007f87bf6edfff in virThreadHelper (data=0x7f87600d5580) at util/virthread.c:206
#6 0x00007f87bb602334 in start_thread (arg=0x7f878ebda700) at pthread_create.c:333
#7 0x00007f87bb3481bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109
(gdb) frame 2
#2 0x00007f87bf6ecf95 in virSystemdGetMachineNameByPID (pid=9849) at util/virsystemd.c:228
228 dbus_message_unref(reply);
(gdb) p reply
$1 = (DBusMessage *) 0x0
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Extract out the qemuParseCommandLine{String|Pid} into their own
separate module - taking with it all the various static functions.
Causes a ripple effect with a few other modules to include the
new qemu_parse_command.h.
Narrowed down the list of #include's in the split out module to
those that are necessary for build.
This reverts commit 6aa90452aa.
Turns out that not linking against libvirt and gnulib is okay for
regular Linux (and FreeBSD) builds, but makes mingw very unhappy.
.../virnetserverclientmock_la-virnetserverclientmock.o:
In function `virNetSocketGetSELinuxContext':
.../virnetserverclientmock.c:61: undefined reference to `rpl_strdup'
.../libvirportallocatormock_la-virportallocatortest.o:
In function `init_syms':
.../virportallocatortest.c:61: undefined reference to `virFileClose'
Mock libraries are used with LD_PRELOAD from test binaries that
are already linked against those libraries, so they will be able
to resolve the symbols anyway.
We use the PreFormat callback for this. Many test cases need to be extended
to pass in proper qemuCaps flags so AssignAddresses doesn't throw errors.
One test case (pcie-root-port-too-many) is dropped, since it was meant
only for checking an error condition in qemuxml2argv, and one we add in
AssignAddresses it errors here too.
Long term I think AssignAddresses should be handled in qemu's PostParse
callback, but that's not entirely straightforward. Handling it here
means we can get the test suite churn over with.
The virStringListLength function does not ever modify the passed
string list. It merely counts the items in it. Make sure that we
reflect this bit in the function header.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(crobinso: fix up spacing and squash in sheepdog bit suggested
by Andrea)
When we unconditionally enable QEMU_CAPS_DEVICE, these tests need
some massaging, so do it ahead of time to not mix it in with the
big test refresh.
- minimal-s390 is not a real world working config, so drop it
- disk-usb was testing for an old code path that will be removed.
instead use it to test lack of USB disk support, and rename it
to disk-usb-nosupport. Switch xml2xml to use disk-usb-device for
input.
- cputune-numatune was needlessly using q35, switch it to an older
machine type
Most qemuxml2xml tests expect that the input XML is unchanged after
parsing. This is unlike 99% of new qemu configs in the wild, which after
initial parsing end up with stable PCI device addresses. The xml2xml bit
doesn't currently hit that code path though, so most XML testing indeed
does not change.
Future patches will add that PCI address bits, which means most test cases
will have different output. So let's do away with the hardcoded same vs
different test split, and always track a separate output file. Tests can
still have same input and output, it just necessitates 2 separate XML files.
Some of the tests that are not a part of qemuBuildCommandLine were not
executed in the test suite. We can now reuse qemuProcessStartValidate to
integrate these tests.
Most of the qemuargv2xml tests are parsing old style qemu command
lines (with -disk, -serial, etc), and it gets its input from
qemuxml2argv output.
But since we've raise the minimum supported qemu version to 0.12.0,
which supports -device, once that changes propagates through libvirt
the vast majority of qemuxml2argv output is _not_ going to be using
old style qemu options.
In preparation for this, switch qemuargv2xml to use its own copies
of input and output, so it's not tied to qemuxml2argv results.
This is just a straight copy of the current tests.
I've noticed couple of warning in dmesg while debugging
something:
[ 9683.973754] HTB: quantum of class 10001 is big. Consider r2q change.
[ 9683.976460] HTB: quantum of class 10002 is big. Consider r2q change.
I've read the HTB documentation and linux kernel code to find out
what's wrong. Basically we need to pass another argument
"quantum" to our tc cmd line because the default computed by HTB
does not always work in which case the warning message is printed
out.
You can read more details here:
http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm#sharing
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So, systemd-machined has this philosophy that machine names are like
hostnames and hence should follow the same rules. But we always allowed
international characters in domain names. Thus we need to modify the
machine name we are passing to systemd.
In order to change some machine names that we will be passing to systemd,
we also need to call TerminateMachine at the end of a lifetime of a
domain. Even for domains that were started with older libvirt. That
can be achieved thanks to virSystemdGetMachineNameByPID(). And because
we can change machine names, we can get rid of the inconsistent and
pointless escaping of domain names when creating machine names.
So this patch modifies the naming in the following way. It creates the
name as <drivername>-<id>-<name> where invalid hostname characters are
stripped out of the name and if the resulting name is longer, it
truncates it to 64 characters. That way we can start domains we
couldn't start before. Well, at least on systemd.
To make it work all together, the machineName (which is needed only with
systemd) is saved in domain's private data. That way the generation is
moved to the driver and we don't need to pass various unnecessary
arguments to cgroup functions.
The only thing this complicates a bit is the scope generation when
validating a cgroup where we must check both old and new naming, so a
slight modification was needed there.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1282846
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The virDomainSnapshotDefFormat calls into virDomainDefFormat,
so should be providing a non-NULL virCapsPtr instance. On the
qemu driver we change qemuDomainSnapshotWriteMetadata to also
include caps since it calls virDomainSnapshotDefFormat.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The virDomainObjFormat and virDomainSaveStatus methods
both call into virDomainDefFormat, so should be providing
a non-NULL virCapsPtr instance.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Ever since commit ace4aecd, running 'make check' on RHEL 6 produces:
./test-lib.sh: line 21: realpath: command not found
for every shell script test, because 'realpath' was not part of
coreutils back then.
* tests/test-lib.sh (_scriptdir): Compute with only portable shell.
Signed-off-by: Eric Blake <eblake@redhat.com>
The name is confusing, and there are just two uses: one is a test case,
and the other will be removed as part of an upcoming refactoring of
the hostdev code.
The current code was a little bit odd. At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description. That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.
This seems to me as a lot of code for nothing. This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.
The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.
There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device. This applies also to XEN hypervisor. VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Those tests are in qemuargv2xmltest and it makes sense to include them
also in qemuxml2xmltest and qemuxml2argvtest.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This will enable regenerate functionality for those tests to make
developer lives easier while updating tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Report
error: invalid argument: requested vcpu '100' is not present in the domain
instead of
error: invalid argument: requested vcpu is higher than allocated vcpus
A future patch will refactor the storage of the pinning information in a
way where the ordering will be lost. Order them numerically to avoid
changing the tests later.
Make bhyveload respect boot order as specified by os.boot section of the
domain XML or by "boot order" for specific devices. As bhyve does not
support a real boot order specification right now, it's just about
choosing a single device to boot from.
... and consolidate the cmdline/extra/root parsing to facilitate doing
so.
The logic is the same as xl's parse_cmdline from the current xen.git master
branch (e6f0e099d2c17de47fd86e817b1998db903cab61).
On the formatting side switch to producing cmdline= instead of extra=.
Update a few tests and add serveral more.
- test-cmdline is added to test the exclusive use of cmdline.
- test-fullvirt-direct-kernel-boot.cfg is updated due to the switch
on the formatting side and now tests the exclusive use of cmdline=.
- Tests are added for both paravirt and fullvirt where the .cfg uses
extra= and (paravirt only) root=. These are format (xl->xml) only
since the inverse will generate cmdline= hence is not a round trip
(which was already true if using root=, which used to generate
extra= on the way back).
- Tests are added for both paravirt and fullvirt where the .cfg
declares cmdline= as well as bogus extra= and (paravirt only) root=
entries which should be ignored. Again these are format only tests
since the inverse won't include the bogus lines.
The last two bullets here required splitting the DO_TEST macro into
two halves, as is done in the xmconfigtest.c case.
In order to introduce a use of VIR_WARN for logging I had to add
virerror.h and VIR_LOG_INIT.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Add a new storage pool source device attribute 'part_separator=[yes|no]'
in order to allow a 'disk' storage pool using a device mapper multipath
device to not add the "p" partition separator to the generated device
name when libvirt_parthelper is run.
This will allow libvirt to find device mapper multipath devices which were
configured in /etc/multipath.conf to use 'user_friendly_names' or custom
'alias' names for the LUN.
In the commit aea47e48c4 we have fixed a single pointer within
driver structure. Since all callers pass statically allocated
driver on stack other pointers within driver may contain random
values too. Before touching it lets overwrite it with zeroes and
thus fix all dangling pointers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Autodeflate can be enabled/disabled for memballon device
of model 'virtio'.
xml:
<devices>
<memballoon model='virtio' autodeflate='on'/>
</devices>
qemu:
qemu -device virtio-balloon-pci,...,deflate-on-oom=on
Autodeflate cannot be enabled/disabled for running domain.
Use virDomainDefAddUSBController() to add an EHCI1+UHCI1+UHCI2+UHCI3
controller set to newly defined Q35 domains that don't have any USB
controllers defined.
The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4))
on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A,
so let's attempt to make the virtual machine match that for
controllers with auto-assigned addresses when possible.
Three test cases were added to assure that the proper addresses are
assigned - one with a single set of unaddressed USB controllers, one
with 3 (to grab both preferred slots plus one more), and one with the
order of the controller definitions reordered, to assure that the
auto-assignment isn't mixed up by order.
If the q35 specific disable s3/s4 setting isn't supported, fallback to
specifying the PIIX setting, which is the previous behavior. It doesn't
have any effect, but qemu will just warn about it rather than error:
qemu-system-x86_64: Warning: global PIIX4_PM.disable_s3=1 not used
qemu-system-x86_64: Warning: global PIIX4_PM.disable_s4=1 not used
Since it doesn't error, I don't think we should either, since there
may be configs in the wild that already have q35 + disable_s3/4 (via
virt-manager)
The condition was checking for UHCI (and OHCI for ppc64) availability so
that it can specify the proper device instead of legacy usb. However,
for ppc64, we don't need to check both OHCI and UHCI, but only OHCI as
that is the legacy default. The condition is so big that it was just a
matter of time when someone will make a mistake there, so let's use more
lines so that it is visible what the condition checks for.
This fixes usage of -device instead of -usb for ppc64 that supports
pci-usb-ohci and does not support piix3-usb-uhci.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1297020
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For some reason we are not setting the driver with memset() to zeros.
But since commit 74abc3deac
driver->securityManager is being accessed and qemuagenttest started
crashing due to that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Future changes will make some of these tests dependent on specific
QEMUCaps flags, so wire up the basic handling. Flags will be added
in future patches.
For the standard active/inactive XML testing, if we leave the file loading
up to the generic XML2XML infrastructure, we get the benefit of
VIR_TEST_REGENERATE_OUTPUT, at the price of a few more disk reads. Seems
worth it.
Since test files are formatted predictably nowadays, we can make
VIR_TEST_REGENERATE_OUTPUT handle most cases for us with a simple
replacement. test-wrap-argv.pl is still canon, but this bit makes
it easier to confirm test output changes during active development.
Both xm and xl config have long supported specifying vif rate
limiting, e.g.
vif = [ 'mac=00:16:3E:74:3d:76,bridge=br0,rate=10MB/s' ]
Add support for mapping rate to and from <bandwidth> in the xenconfig
parser and formatter. rate is mapped to the required 'average' attribute
of the <outbound> element, e.g.
<interface type='bridge'>
...
<bandwidth>
<outbound average='10240'/>
</bandwidth>
</interface>
Also add a unit test to check the conversion logic.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The xen sexpr config format has long supported specifying vif rate
limiting, e.g.
(device
(vif
(mac '00:16:3e:1b:b1:47')
(rate '10240KB/s')
...
)
)
Add support for mapping rate to and from <bandwidth> in the xenconfig
sexpr parser and formatter. rate is mapped to the required 'average'
attribute of the <outbound> element, e.g.
<interface type='bridge'>
...
<bandwidth>
<outbound average='10240'/>
</bandwidth>
</interface>
Also add unit tests to check the conversion logic.
This patch benefits both the old xen driver and the libxl driver.
Both drivers gain support for vif bandwidth when converting to/from
domXML and xen-sxpr. In addition, the old xen driver will now be
able to handle vif 'rate' setting when communicating with xend.
The structure actually contains migration statistics rather than just
the status as the name suggests. Renaming it as
qemuMonitorMigrationStats removes the confusion.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Let's use the new virTestDifferenceFull function that will regenerate
the expected output and fail the test to let developer know that there
something was updated.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This patch enable regeneration of expected output file for
virTestDifferenceFull. It also introduces new
virTestDifferenceFullNoRegenerate function for special cases, where we
don't want to regenerate output.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When this flag is specified, some of the expected output files will be
regenerated with the actual output data. Use helper function like for
other flags.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If user defines a virtio channel with UNIX socket backend and doesn't
care about the path for the socket (e.g. qemu-agent channel), we still
generate it into the persistent XML. Moreover when then user renames
the domain, due to its persistent socket path saved into the per-domain
directory, it will not start. So let's forget about old generated paths
and also stop putting them into the persistent definition.
https://bugzilla.redhat.com/show_bug.cgi?id=1278068
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Just recently, qemu forbade specifying format for sourceless
disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense.
If there's no file to open, why specify its format. Anyway, I
have a domain like this:
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<target dev='hda' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
and obviously I am unable to start it. Therefore, a fix on our
side is needed too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
By default, QEMU truncates serial file on open. Sometimes, it could be weird -
for example, when we are trying to investigate some event, which occured several
restarts ago. This patch adds an ability to preserve previous content.
Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
This replaces the virPCIKnownStubs string array that was used
internally for stub driver validation.
Advantages:
* possible values are well-defined
* typos in driver names will be detected at compile time
* avoids having several copies of the same string around
* no error checking required when setting / getting value
The names used mirror those in the
virDomainHostdevSubsysPCIBackendType enumeration.
From: Ian Campbell <ian.campbell@citrix.com>
xend prior to 4.0 understands vcpus as maxvcpus and vcpu_avail
as a bit map of which cpus are online (default is all).
xend from 4.0 onwards understands maxvcpus as maxvcpus and
vcpus as the number which are online (from 0..N-1). The
upstream commit (68a94cf528e6 "xm: Add maxvcpus support")
claims that if maxvcpus is omitted then the old behaviour
(i.e. obeying vcpu_avail) is retained, but AFAICT it was not,
in this case vcpu==maxcpus==online cpus. This is good for us
because handling anything else would be fiddly.
This patch changes parsing of the virDomainDef maxvcpus and vcpus
entries to use the corresponding 'maxvcpus' and 'vcpus' settings
from xm and xl config. It also drops use of the old Xen 3.x
'vcpu_avail' setting.
The change also removes the maxvcpus limit of MAX_VIRT_VCPUS (since
maxvcpus is simply a count, not a bit mask), which is particularly
crucial on ARM where MAX_VIRT_CPUS == 1 (since all guests are
expected to support vcpu placement, and therefore only the boot
vcpu's info lives in the shared info page).
Existing tests adjusted accordingly, and new tests added for the
'maxvcpus' setting.
Remove use of xendConfigVersion in the s-expresion config formatter/parser
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Change all xml2sexpr tests to use the latest XEND_CONFIG_VERSION
(XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to
the latest version.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
It has been quite some time since xend required specifying cdroms
and fds in '(image (hvm ...))'. Remove the code from the parsing
and formatting functions and fixup the associated tests.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Change all sexpr2xml tests to use the latest XEND_CONFIG_VERSION
(XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to
the latest version.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Remove use of xendConfigVersion in the xm and xl config formatter/parsers
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Change all tests to use the latest XEND_CONFIG_VERSION
(XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to
the latest version.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Remove the fullvirt-net-ioemu test since explicitly specifying
'type=ioemu' has not been needed in xm/xend for a long time. It is
not used at all in xl/libxl.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Always return LLONG_MAX even on 32 bit systems. The limitation
originates from our use of "unsigned long" in several APIs. The internal
data type is unsigned long long. Make the test suite deterministic by
removing the architecture difference.
Flaw was introduced in 645881139b where
I've added a test that uses too large numbers.
This updates the test program to make it consistent with recent changes
to the mock libraries, and also opens up the possibility of mocking more
than just /sys in the future.
Instead of fakesysfsdir, which is very generic, use fakesysfspcidir and
fakesysfscgroupdir. This makes it explicit what part of the fake sysfs
filesystem they're referring to, and also leaves open the possibility of
handling files in two unrelated parts of the fake sysfs filesystem.
No functional changes.
We might need to mock files living outside SYSFS_PREFIX later on,
so it's better to treat the temporary directory we are passed via
the environment as the root of the fake filesystem and create
SYSFS_PREFIX inside it.
The environment variable name will be changed to reflect the new use
we're making of it in a later commit.
We might need to mock files living outside PCI_SYSFS_PREFIX later on,
so it's better to treat the temporary directory we are passed via
the environment as the root of the fake filesystem and create
PCI_SYSFS_PREFIX inside it.
The environment variable name will be changed to reflect the new use
we're making of it in a later commit.
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Since libvirt for dubious historical reasons stores memory size as
kibibytes, it's possible that the alignments done in the qemu code
overflow the the maximum representable size in bytes. The XML parser
code handles them in bytes in some stages. Prevent this by doing
overflow checks when alinging the size and add a test case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260576
To be used by the family of virtio input devices:
<input type='mouse' bus='virtio'/>
<input type='tablet' bus='virtio'/>
<input type='keyboard' bus='virtio'/>
https://bugzilla.redhat.com/show_bug.cgi?id=1231114
Add capabilities for virtio-keyboard, virtio-mouse
and virtio-tablet devices:
name "virtio-keyboard-device", bus virtio-bus
name "virtio-keyboard-pci", bus PCI
name "virtio-mouse-device", bus virtio-bus
name "virtio-mouse-pci", bus PCI
name "virtio-tablet-device", bus virtio-bus
name "virtio-tablet-pci", bus PCI
Map both -device and -pci versions of the device to one capability.
https://bugzilla.redhat.com/show_bug.cgi?id=1231114
If for some reason there is an existing log file, that is larger then
max length of log file, we need to rollover that file immediately.
Trying to figure out how much data we could write will resolve in
overflow of unsigned variable 'towrite' and this leads to segfault.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Check if virtio-gpu provides virgl option, and add qemu command line
formatter.
It is enabled with the existing accel3d attribute:
<model type='virtio' heads='1'>
<acceleration accel3d='yes'/>
</model>
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemu 2.5 provides virtio video device. It can be used with -device
virtio-vga for primary devices, or -device virtio-gpu for non-vga
devices. However, only the primary device (VGA) is supported with this
patch.
Reference:
https://bugzilla.redhat.com/show_bug.cgi?id=1195176
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Machine name escaping follows the same rules as serice name escape,
except that '.' and '-' must not be escaped in machine names, due
to a bug in systemd-machined.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1282846
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The rule for virrotatingfiletest was defined in DBUS-only block even
though the test does not use DBus at all. Also DBUS_CFLAGS and
DBUS_LIBS are removed from the rules. The original error was:
/usr/lib/gcc/x86_64-pc-linux-gnu/5.2.0/../../../../lib64/Scrt1.o: In
function `_start':
(.text+0x20): undefined reference to `main'
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Otherwise we fail on 32bit with:
CC logging/virtlogd-log_daemon_dispatch.o
logging/log_daemon_dispatch.c: In function 'virLogManagerProtocolDispatchDomainReadLogFile':
logging/log_daemon_dispatch.c:120:9: error: format '%zu' expects argument of type 'size_t', but argument 7 has type 'uint64_t' [-Werror=format]
Add virRotatingFileReader and virRotatingFileWriter objects
which allow reading & writing from/to files with automation
rotation to N backup files when a size limit is reached. This
is useful for guest logging when a guaranteed finite size
limit is required. Use of external tools like logrotate is
inadequate since it leaves the possibility for guest to DOS
the host in between invokations of logrotate.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
According to the documentation, CreateMachine accepts only 7bit ASCII
characters in the machinename parameter, so let's make sure we can start
machines with unicode names with systemd. We already have a function
for that, we just forgot to use it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1062943
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1282846
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
'model' attribute was added to a panic device but only one panic
device is allowed. This patch changes panic device presence
from 'optional' to 'zeroOrMore'.
Panic device type used depends on 'model' attribute.
If no model is specified then device type depends on hypervisor
and guest arch. 'pseries' model is used for pSeries guest and
'isa' model is used in other cases.
XML:
<devices>
<panic model='hyperv'/>
</devices>
QEMU command line:
qemu -cpu <cpu_model>,hv_crash
Traditionally, we pass incoming migration URI on QEMU command line,
which has some drawbacks. Depending on the URI QEMU may initialize its
migration state immediately without giving us a chance to set any
additional migration parameters (this applies mainly for fd: URIs). For
some URIs the monitor may be completely blocked from the beginning until
migration is finished, which means we may be stuck in qmp_capabilities
command without being able to send any QMP commands.
QEMU solved this by introducing "defer" parameter for -incoming command
line option. This will tell QEMU to prepare for an incoming migration
while the actual incoming URI is sent using migrate-incoming QMP
command. Before calling this command we can normally talk to the
monitor and even set any migration parameters which will be honored by
the incoming migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Make callers of qemuBuildCommandLine responsible for providing the URI
which should be passed as a parameter for -incoming.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Introduce a new helper function "virDiskNameParse" which extends
virDiskNameToIndex but handling both disk index and partition index.
Also rework virDiskNameToIndex to be based on virDiskNameParse.
A test is also added for this function testing both valid and
invalid disk names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
This patch addresses BZ 1244895.
Adapt the sysfs TPM command cancel path for the TPM driver that
does not use a miscdevice anymore since Linux 4.0. Support old
and new paths and check their availability.
Add a mockup for the test cases to avoid the testing for
availability of the cancel path.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
It's just a copy&paste of qemuxml2argv test anyway. We can test most of
them (except for qemuxmlns-qemu-ns-domain.xml which fails to validate
against our schema) by qemuxml2argv test.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
USB controllers can share the same 'index' which indicates, that there
is some sort of master-companion relationship. Reorder the controllers
in XML in to place the master controller before its companions. This is
required by QEMU to not fail with error message:
error: internal error: process exited while connecting to monitor:
2015-10-26T16:25:17.630265Z qemu-system-x86_64:
-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x6:
USB bus 'usb.0' not found
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1166452
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The -sdl and -net ...name=XXX arguments were both introduced
in QEMU 0.10, so the QEMU driver can assume they are always
available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0 the -vga argument was introduced, so the
QEMU driver can assume it is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0 the -drive format= parameter was added,
so the QEMU driver can assume it is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0, the -drive cache option stopped using
the on/off value names, so the QEMU driver can assume
use of the new value names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we require QEMU 0.12.0, we can assume that QEMU supports
all of the fd, tcp, unix and exec migration protocols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We have twice previously attempted to remove Xenner
support
commit de9be0ab4d
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Aug 22 17:29:01 2012 +0100
Remove xenner support
commit 92572c3d71
Author: Ján Tomko <jtomko@redhat.com>
Date: Wed Feb 18 16:33:50 2015 +0100
Remove code handling the QEMU_CAPS_DOMID capability
This change really does remove the last traces of it
in the capabilities handling code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.9.1 the -drive argument can be used to configure
all disks, so the QEMU driver can assume it is always available
and drop support for -hda/-cdrom/etc.
Many of the tests need updating because a great many were
running without CAPS_DRIVE set, so using the -hda legacy
syntax.
Fixing the tests uncovered a bug in the argv -> xml
convertor which failed to handle disk with if=floppy.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The -no-reboot arg was added in QEMU 0.9.0, so the QEMU driver
can now assume it is always present.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.9.0 the -vnc option accepts a ':' to separate port
from listen address, so the QEMU driver can assume that support
for listen addresses is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Check the QEMU version and refuse to work with QEMU versions
older than 0.12.0. This is approximately the vintage of QEMU
that is available in RHEL-6 era distros.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Back in
commit bd6c46fa0c
Author: Juerg Haefliger <juerg.haefliger@hp.com>
Date: Mon Jan 31 06:42:57 2011 -0500
tests: handle backspace-newline pairs in test input files
all the test argv files were line wrapped so that the args
were less than 80 characters.
The way the line wrapping was done turns out to be quite
undesirable, because it often leaves multiple parameters
on the same line. If we later need to add or remove
individual parameters, then it leaves us having to redo
line wrapping.
This commit changes the line wrapping so that every
single "-param value" is one its own new line. If the
"value" is still too long, then we break on ',' or ':'
or ' ' as needed.
This means that when we come to add / remove parameters
from the test files line, the patch diffs will only
ever show a single line added/removed which will greatly
simplify review work.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
VIR_DEBUG and VIR_WARN will automatically add a new line to the message,
having "\n" at the end or at the beginning of the message results in
empty lines.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
A bunch of files that we don't currently parse, and are very
unlikely to ever start parsing, made their way into the nodeinfo
test data. Get rid of them.
We have macros for both positive and negative string matching.
Therefore there is no need to use !STREQ or !STRNEQ. At the same
time as we are dropping this, new syntax-check rule is
introduced to make sure we won't introduce it again.
Signed-off-by: Ishmanpreet Kaur Khera <khera.ishman@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1249981
When qemuDomainPinIOThread was added in commit id 'fb562614', a check
for the IOThread capability was not needed since a check for iothreadpids
covered the condition where the support for IOThreads was not present.
The iothreadpids array was only created if qemuProcessDetectIOThreadPIDs
was able to query the monitor for IOThreads. It would only do that if
the QEMU_CAPS_OBJECT_IOTHREAD capability was set.
However, when iothreadids were added in commit id '8d4614a5' and the
check for iothreadpids was replaced by a search through the iothreadids[]
array for the matching iothread_id that left open the possibility that
an iothreadids[] array was defined, but the entries essentially pointed
to elements with only the 'iothread_id' defined leaving the 'thread_id'
value of 0 and eventually the cpumap entry of NULL.
This was because, the original IOThreads commit id '72edaae7' only
checked if IOThreads were defined and if the emulator had the IOThreads
capability, then IOThread objects were added at startup. The "capability
failure" check was only done when a disk was assigned to an IOThread in
qemuCheckIOThreads. This was because the initial implementation had no way
to dynamically add IOThreads, but it was possible to dynamically add a
disk to the domain. So the decision was if the domain supported it, then
add the IOThread objects. Then if a disk with an IOThread defined was
added, it could check the capability and fail to add if not there. This
just meant the 'iothreads' value was essentially ignored.
Eventually commit id 'a27ed6e7' allowed for the dynamic addition and
deletion of IOThread objects. So it was no longer necessary to generate
IOThread objects to dynamically attach a disk to. However, the startup
and disk check code was not modified to reflect this.
This patch will move the capability failure check to when IOThread
objects are being added to the command line. Thus a domain that has
IOThreads defined will not be started if the emulator doesn't support
the capability. This means when qemuCheckIOThreads is called to add
a disk, it's no longer necessary to check the capability. Instead the
code can use the IOThreadFind call to indicate that the IOThread
doesn't exist.
Finally because it could be possible to have a domain running with the
iothreadids[] defined prior to this change if libvirtd is restarted each
having mostly empty elements, qemuProcessDetectIOThreadPIDs will check
if there are niothreadids when the QEMU_CAPS_OBJECT_IOTHREAD capability
check fails and remove the elements and array if it exists.
With these changes in place, it turns out the cputune-numatune test
was failing because the right bit wasn't set in the test. So used the
opportunity to fix that and create a test that would expect to fail
with some sort of iothreads defined and used, but not having the
correct capability.
It should redirect stdout to /dev/null first,
then redirect stderr to whatever stdout currently points at.
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
So imagine you want to crate new security manager:
if (!(mgr = virSecurityManagerNew("selinux", "QEMU", false, true, false, true)));
Hard to parse, right? What about this:
if (!(mgr = virSecurityManagerNew("selinux", "QEMU",
VIR_SECURITY_MANAGER_DEFAULT_CONFINED |
VIR_SECURITY_MANAGER_PRIVILEGED)));
Now that's better! This is what the commit does.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
- qemuxml2argv-aarch64-mmio-default-pci: Verify that we still default
to virtio-mmio even if qemu is new enough to support PCI
- qemuxml2argv-aarch64-virtio-pci: Check generated arm virtio PCI args
Our docs state that subelements of <metadata> shall have a namespace
and the medatata APIs expect that too. To avoid inaccessible
<metadata> sub-elements, just remove those that don't conform to the
documentation.
Apart from adding the new condition this patch renames the function and
refactors the code flow to allow the changes.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1245525
virtTestResult is suboptimal for a few reasons:
- It poorly duplicates virtTestRun pass/fail reporting logic
- It doesn't have virtTestRun's alloc testing support
- It only reports the test name _after_ the test has run.
- It doesn't follow the standard virtTestRun pattern that most other
tests use.
There's no users left, so drop it. If any other async tests like eventtest
spring up that don't cleanly fit the virtTestRun pattern, I suggest they
just open code the support for it around virtTestRun
These event tests aren't run synchronously, so there isn't an obvious
function to pass to virtTestRun. Instead, open code roughly what
virtTestResult did before: printing an error message if a test failed.
We are using memory-backing-file even when it's not needed, for example
if user requests hugepages for memory backing, but does not specify any
pagesize or memory node pinning. This causes migrations to fail when
migrating from older libvirt that did not do this. So similarly to
commit 7832fac847 which does it for
memory-backend-ram, this commit makes is more generic and
backend-agnostic, so the backend is not used if there is no specific
pagesize of hugepages requested, no nodeset the memory node should be
bound to, no memory access change required, and so on.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1266856
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That function is called qemuBuildMemPathStr() and will be used in
other places in the future. The change in the test suite is proper due
to the fact that -mem-prealloc makes only sense with -mem-path (from
qemu documentation -- html/qemu-doc.html).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Introduce VIR_DOMAIN_VIRT_NONE to give domaintype the default value of zero.
This is specially helpful in constructing better error messages
when we don't want to look up the default emulator by virtType.
The test data in vircapstest.c is also modified to reflect this change.
My original implementation was based on a qemu version that still did
not have all the checks in place. Using sizes that would align to odd
megabyte increments will produce the following error:
qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,id=dimm0: backend memory size must be multiple of 0x200000
qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,id=dimm0: Device 'pc-dimm' could not be initialized
Introduce an alignment retrieval function for memory devices and use it
to align the devices separately and modify a test case to verify it.
We use the function to create a virDomainXMLOption object that is
required for some functions. However, we don't pass the driver
pointer to the object anywhere - rather than pass NULL. This
causes trouble later when parsing a domain XML and calling post
parse callbacks:
Program received signal SIGSEGV, Segmentation fault.
0x000000000043fa3e in qemuDomainDefPostParse (def=0x7d36c0, caps=0x7caf10, opaque=0x0) at qemu/qemu_domain.c:1043
1043 qemuCaps = virQEMUCapsCacheLookup(driver->qemuCapsCache, def->emulator);
(gdb) bt
#0 0x000000000043fa3e in qemuDomainDefPostParse (def=0x7d36c0, caps=0x7caf10, opaque=0x0) at qemu/qemu_domain.c:1043
#1 0x00007ffff2928bf9 in virDomainDefPostParse (def=0x7d36c0, caps=0x7caf10, xmlopt=0x7c82c0) at conf/domain_conf.c:4269
#2 0x00007ffff294de04 in virDomainDefParseXML (xml=0x7da8c0, root=0x7dab80, ctxt=0x7da980, caps=0x7caf10, xmlopt=0x7c82c0, flags=0) at conf/domain_conf.c:16400
#3 0x00007ffff294e5b5 in virDomainDefParseNode (xml=0x7da8c0, root=0x7dab80, caps=0x7caf10, xmlopt=0x7c82c0, flags=0) at conf/domain_conf.c:16582
#4 0x00007ffff294e424 in virDomainDefParse (xmlStr=0x0, filename=0x7c7ef0 "/home/zippy/work/libvirt/libvirt.git/tests/securityselinuxlabeldata/disks.xml", caps=0x7caf10, xmlopt=0x7c82c0, flags=0) at conf/domain_conf.c:16529
#5 0x00007ffff294e4b2 in virDomainDefParseFile (filename=0x7c7ef0 "/home/zippy/work/libvirt/libvirt.git/tests/securityselinuxlabeldata/disks.xml", caps=0x7caf10, xmlopt=0x7c82c0, flags=0) at conf/domain_conf.c:16553
#6 0x00000000004303ca in testSELinuxLoadDef (testname=0x53c929 "disks") at securityselinuxlabeltest.c:192
#7 0x00000000004309e8 in testSELinuxLabeling (opaque=0x53c929) at securityselinuxlabeltest.c:313
#8 0x0000000000431207 in virtTestRun (title=0x53c92f "Labelling \"disks\"", body=0x430964 <testSELinuxLabeling>, data=0x53c929) at testutils.c:211
#9 0x0000000000430c5d in mymain () at securityselinuxlabeltest.c:373
#10 0x00000000004325c2 in virtTestMain (argc=1, argv=0x7fffffffd7e8, func=0x430b4a <mymain>) at testutils.c:863
#11 0x0000000000430deb in main (argc=1, argv=0x7fffffffd7e8) at securityselinuxlabeltest.c:381
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Even though usage of the lock is limited to a very few cases,
it's still needed. Therefore we should initialize it too.
Otherwise we may get some random test failures:
==1204== Conditional jump or move depends on uninitialised value(s)
==1204== at 0xEF7F7CF: pthread_mutex_lock (in /lib64/libpthread-2.20.so)
==1204== by 0x9CA89A5: virMutexLock (virthread.c:89)
==1204== by 0x450B2A: qemuDriverLock (qemu_conf.c:83)
==1204== by 0x45549C: virQEMUDriverGetConfig (qemu_conf.c:869)
==1204== by 0x448E29: qemuDomainDeviceDefPostParse (qemu_domain.c:1240)
==1204== by 0x9CC9B13: virDomainDeviceDefPostParse (domain_conf.c:4224)
==1204== by 0x9CC9B91: virDomainDefPostParseDeviceIterator (domain_conf.c:4251)
==1204== by 0x9CC7843: virDomainDeviceInfoIterateInternal (domain_conf.c:3440)
==1204== by 0x9CC9C25: virDomainDefPostParse (domain_conf.c:4276)
==1204== by 0x9CEEE03: virDomainDefParseXML (domain_conf.c:16400)
==1204== by 0x9CEF5B4: virDomainDefParseNode (domain_conf.c:16582)
==1204== by 0x9CEF423: virDomainDefParse (domain_conf.c:16529)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For some machine types ppc64 machines now require that memory sizes are
aligned to 256MiB increments (due to the dynamically reconfigurable
memory). As now we treat existing configs reasonably in regards to
migration, we can round all the sizes unconditionally. The only drawback
will be that the memory size of a VM can potentially increase by
(256MiB - 1byte) * number_of_NUMA_nodes.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1249006
When we are starting a qemu process for an incomming migration or
snapshot reloading we should not modify the memory sizes in the domain
since we could potentially change the guest ABI that was tediously
checked before. Additionally the function now updates the initial memory
size according to the NUMA node size, which should not happen if we are
restoring state.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1252685
The flag was used only for formatting the XML and once the parser and
formatter flags were split in 0ecd685109
it doesn't make sense any more to have it.
Use the new API in order to correctly add capability sets to the cache
before parsing XML files
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The main purpose of this patch is to introduce test mode to
virQEMUCapsCacheLookup(). This is done by adding a global variable, which
effectively overrides binary name. This variable is supposed to be set by
test suite.
The second addition is qemuTestCapsCacheInsert() function which allows the
test suite to actually populate the cache.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Two utility functions are introduced for proper initialization and
cleanup of the driver.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Tool such as libguestfs need the datacenter path to get access to disk
images. The ESX driver knows the correct datacenter path, but this
information cannot be accessed using libvirt API yet. Also, it cannot
be deduced from the connection URI in a robust way.
Expose the datacenter path in the domain XML as <vmware:datacenterpath>
node similar to the way the <qemu:commandline> node works. The new node
is ignored while parsing the domain XML. In contrast to <qemu:commandline>
it is output only.
Commit id 'f1f68ca33' added code to remove the directory paths for
auto-generated sockets, but that code could be called before the
paths were created resulting in generating error messages from
virFileDeleteTree indicating that the file doesn't exist.
Rather than "enforce" all callers to make the non-NULL and existence
checks, modify the virFileDeleteTree API to silently ignore NULL on
input and non-existent directory trees.
We may want to do some decisions in drivers based on fact if we
are running as privileged user or not. Propagate this info there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Mock libraries are not built with testutils.c, but there's one which
uses VIR_TEST_DEBUG. But because that debug should be an error, if we
change it, then it will not only be more semantically correct, but mingw
compiler will be happier as well.
It also follows suit with all other mock libraries.
For few other things, used in this file, need libvirt.la to be added
into LIBADD for mingw as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1260846
Introduced by 8fedbbdb, if we parse an unordered NUMA cell, will
get a segfault. This is because of a check for overlapping @cpus
sets we have there. However, since the array to hold guest NUMA
cells is allocated upfront and therefore it contains all zeros,
an out of order cell will break our assumption that cell IDs have
increasing character. At this point we try to access yet NULL
bitmap and therefore segfault.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.
The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.
<interface type='udp'>
<mac address='52:54:00:5c:67:56'/>
<source address='127.0.0.1' port='11112'>
<local address='127.0.0.1' port='22222'/>
</source>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>
QEMU call:
-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222
Notice the xml "local" entry becomes the "localaddr" for the qemu call.
reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.html
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch adds feature for lxc containers to inherit namespaces.
This is very similar to what lxc-tools or docker provides. Look
for "man lxc-start" and you will find that you can pass command
args as [ --share-[net|ipc|uts] name|pid ]. Or check out docker
networking option in which you can give --net=container:NAME_or_ID
as an option for sharing +namespace.
>From this patch you can add extra libvirt option to share
namespace in following way.
<lxc:namespace>
<lxc:sharenet type='netns' value='red'/>
<lxc:shareipc type='pid' value='12345'/>
<lxc:shareuts type='name' value='container1'/>
</lxc:namespace>
The netns option is specific to sharenet. It can be used to
inherit from existing network namespace.
Co-authored: Daniel P. Berrange <berrange@redhat.com>
We forbid access to /usr/share/, but (at least on Debian-based systems)
the Open Virtual Machine Firmware files needed for booting UEFI virtual
machines in QEMU live in /usr/share/ovmf/. Therefore, we need to add
that directory to the list of read only paths.
A similar patch was suggested by Jamie Strandboge <jamie@canonical.com>
on https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1483071.
The output of that function was not tested until now. In order to keep
the paths in /tmp, the test driver config is "fixed" as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We are automatically generating some socket paths for domains, but all
those paths end up in a directory that's the same for multiple domains.
The problem is that multiple domains can each run with different
seclabels (users, selinux contexts, etc.). The idea here is to create a
per-domain directory labelled in a way that each domain can access its
own unix sockets.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
JSON data that are used to initialize tests in virnetdaemontest should
be in a consistent format, i.e. not using tabs for indentation, those
should be replaced by spaces.
The numad hint stored in priv->autoNodeset is information that gets lost
during daemon restart. And because we would like to use that
information in the future, we also need to save it in the status XML.
For the sake of tests, we need to initialize nnumaCell_max to some
value, so that the restoration doesn't fail in our test suite. There is
no need to fill in the actual numa cell data since the recalculating
function virCapabilitiesGetCpusForNodemask() will not fail, it will just
skip filling the data in the bitmap which we don't use in tests anyway.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit a6f9af8292 added checking for address colisions between
starting and ending addresses of forwarding addresses, but forgot that
there might be no addresses set at all.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The upcoming commits will make heavy modifications to the ppc64
driver, split so that it's easier to review the changes.
Instead of updating the test cases so that they pass, possibly
only to update them again with the following commit, disable them
for the time being.
Another commit will update them all in one go once all required
changes are in place.
Limitations of the POWER architecture mean that you can't run
eg. a POWER7 guest on a POWER8 host when using KVM. This applies
to all guests, not just those using VIR_CPU_MATCH_STRICT in the
CPU definition; in fact, exact and strict CPU matching are
basically the same on ppc64.
This means, of course, that hosts using different CPUs have to be
considered incompatible as well.
Change ppc64Compute(), called by cpuGuestData(), to reflect this
fact and update test cases accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1250977
A test is considered successful if the obtained result matches
the expected result: if that's not the case, whether because a
test that was expected to succeed failed or because a test that
was supposed to fail succeeded, then something's not right and
we want the user to know about this.
On the other hand, if a failure that's unrelated to the bits
we're testing occurs, then the user should be notified even if
the test was expected to fail.
Use different values to tell these two situations apart.
Fix a test case that was wrongly expected to fail as well.
This patch modifies virSocketAddrGetRange() to function properly when
the containing network/prefix of the address range isn't known, for
example in the case of the NAT range of a virtual network (since it is
a range of addresses on the *host*, not within the network itself). We
then take advantage of this new functionality to validate the NAT
range of a virtual network.
Extra test cases are also added to verify that virSocketAddrGetRange()
works properly in both positive and negative cases when the network
pointer is NULL.
This is the *real* fix for:
https://bugzilla.redhat.com/show_bug.cgi?id=985653
Commits 1e334a and 48e8b9 had earlier been pushed as fixes for that
bug, but I had neglected to read the report carefully, so instead of
fixing validation for the NAT range, I had fixed validation for the
DHCP range. sigh.
Since its introduction in 2011 (particularly in commit f4324e3292),
the option doesn't work. It just effectively disables all incoming
connections. That's because the client private data that contain the
'keepalive_supported' boolean, are initialized to zeroes so the bool is
false and the only other place where the bool is used is when checking
whether the client supports keepalive. Thus, according to the server,
no client supports keepalive.
Removing this instead of fixing it is better because a) apparently
nobody ever tried it since 2011 (4 years without one month) and b) we
cannot know whether the client supports keepalive until we get a ping or
pong keepalive packet. And that won't happen until after we dispatched
the ConnectOpen call.
Another two reasons would be c) the keepalive_required was tracked on
the server level, but keepalive_supported was in private data of the
client as well as the check that was made in the remote layer, thus
making all other instances of virNetServer miss this feature unless they
all implemented it for themselves and d) we can always add it back in
case there is a request and a use-case for it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This controller can be connected only to a port on a
pcie-switch-upstream-port. It provides a single hotpluggable port that
will accept any PCI or PCIe device, as well as any device requiring a
pcie-*-port (the only current example of such a device is the
pcie-switch-upstream-port).
The downstream ports of an x3130-upstream switch can each have one of
these plugged into them (and that is the only place they can be
connected). Each xio3130-downstream provides a single PCIe port that
can have PCI or PCIe devices hotplugged into it. Apparently an entire
set of x3130-upstream + several xio3130-downstreams can be hotplugged
as a unit, but it's not clear to me yet how that would be done, since
qemu only allows attaching a single device at a time.
This device will be used to implement the
"pcie-switch-downstream-port" model of pci controller.
This controller can be connected only to a pcie-root-port or a
pcie-switch-downstream-port (which will be added in a later patch),
which is the reason for the new connect type
VIR_PCI_CONNECT_TYPE_PCIE_PORT. A pcie-switch-upstream-port provides
32 ports (slot=0 to slot=31) on the downstream side, which can only
have pci controllers of model "pcie-switch-downstream-port" plugged
into them, which is the reason for the other new connect type
VIR_PCI_CONNECT_TYPE_PCIE_SWITCH.
This is the upstream part of a PCIe switch. It connects to a PCIe port
(but not PCI) on the upstream side, and can have up to 31
xio3130-downstream controllers (but no other types of devices)
connected to its downstream side.
This device will be used to implement the "pcie-switch-upstream-port"
model of pci controller.
This is backed by the qemu device ioh3420.
chassis and port from the <target> subelement are used to store/set the
respective qemu device options for the ioh3420. Currently, chassis is
set to be the index of the controller, and port is set to
"(slot << 3) + function" (per suggestion from Alex Williamson).
This controller can be connected (at domain startup time only - not
hotpluggable) only to a port on the pcie root complex ("pcie-root" in
libvirt config), hence the new connect type
VIR_PCI_CONNECT_TYPE_PCIE_ROOT. It provides a hotpluggable port that
will accept any PCI or PCIe device.
New attributes must be added to the controller <target> subelement for
this - chassis and port are guest-visible option values that will be
set by libvirt with values derived from the controller's index and pci
address information.
This is a PCIE "root port". It connects only to a port of the
integrated pcie.0 bus of a Q35 machine (can't be hotplugged), and
provides a single PCIe port that can have PCI or PCIe devices
hotplugged into it.
This device will be used to implement the "pcie-root-port" model of
pci controller.
This uses the new subelement/attribute in two ways:
1) If a "pci-bridge" pci controller has no chassisNr attribute, it
will automatically be set to the controller's index as soon as the
controller's PCI address is known (during
qemuDomainAssignPCIAddresses()).
2) when creating the commandline for a pci-bridge device, chassisNr
will be used to set qemu's chassis_nr option (rather than the previous
practice of hard-coding it to the controller's index).
There are some configuration options to some types of pci controllers
that are currently automatically derived from other parts of the
controller's configuration. For example, in qemu a pci-bridge
controller has an option that is called "chassis_nr"; up until now
libvirt has always set chassis_nr to the index of the pci-bridge. So
this:
<controller type='pci' model='pci-bridge' index='2'/>
will always result in:
-device pci-bridge,chassis_nr=2,...
on the qemu commandline. In the future we may decide there is a better
way to derive that option, but even in that case we will need for
existing domains to retain the same chassis_nr they were using in the
past - that is something that is visible to the guest so it is part of
the guest ABI and changing it would lead to problems for migrating
guests (or just guests with very picky OSes).
The <target> subelement has been added as a place to put the new
"chassisNr" attribute that will be filled in by libvirt when it
auto-generates the chassisNr; it will be saved in the config, then
reused any time the domain is started:
<controller type='pci' model='pci-bridge' index='2'>
<model type='pci-bridge'/>
<target chassisNr='2'/>
</controller>
The one oddity of all this is that if the controller configuration
is changed (for example to change the index or the pci address
where the controller is plugged in), the items in <target> will
*not* be re-generated, which might lead to conflict. I can't
really see any way around this, but fortunately if there is a
material conflict qemu will let us know and we will pass that on
to the user.
This new subelement is used in PCI controllers: the toplevel
*attribute* "model" of a controller denotes what kind of PCI
controller is being described, e.g. a "dmi-to-pci-bridge",
"pci-bridge", or "pci-root". But in the future there will be different
implementations of some of those types of PCI controllers, which
behave similarly from libvirt's point of view (and so should have the
same model), but use a different device in qemu (and present
themselves as a different piece of hardware in the guest). In an ideal
world we (i.e. "I") would have thought of that back when the pci
controllers were added, and used some sort of type/class/model
notation (where class was used in the way we are now using model, and
model was used for the actual manufacturer's model number of a
particular family of PCI controller), but that opportunity is long
past, so as an alternative, this patch allows selecting a particular
implementation of a pci controller with the "name" attribute of the
<model> subelement, e.g.:
<controller type='pci' model='dmi-to-pci-bridge' index='1'>
<model name='i82801b11-bridge'/>
</controller>
In this case, "dmi-to-pci-bridge" is the kind of controller (one that
has a single PCIe port upstream, and 32 standard PCI ports downstream,
which are not hotpluggable), and the qemu device to be used to
implement this kind of controller is named "i82801b11-bridge".
Implementing the above now will allow us in the future to add a new
kind of dmi-to-pci-bridge that doesn't use qemu's i82801b11-bridge
device, but instead uses something else (which doesn't yet exist, but
qemu people have been discussing it), all without breaking existing
configs.
(note that for the existing "pci-bridge" type of PCI controller, both
the model attribute and <model> name are 'pci-bridge'. This is just a
coincidence, since it turns out that in this case the device name in
qemu really is a generic 'pci-bridge' rather than being the name of
some real-world chip)
If a pci address had a function number out of range, the error message
would be:
Insufficient specification for PCI address
which is logged by virDevicePCIAddressParseXML() after
virDevicePCIAddressIsValid returns a failure.
This patch enhances virDevicePCIAddressIsValid() to optionally report
the error itself (since it is the place that decides which part of the
address is "invalid"), and uses that feature when calling from
virDevicePCIAddressParseXML(), so that the error will be more useful,
e.g.:
Invalid PCI address function=0x8, must be <= 7
Previously, virDevicePCIAddressIsValid didn't check for the
theoretical limits of domain or bus, only for slot or function. While
adding log messages, we also correct that ommission. (The RNG for PCI
addresses already enforces this limit, which by the way means that we
can't add any negative tests for this - as far as I know our
domainschematest has no provisions for passing XML that is supposed to
fail).
Note that virDevicePCIAddressIsValid() can only check against the
absolute maximum attribute values for *any* possible PCI controller,
not for the actual maximums of the specific controller that this
device is attaching to; fortunately there is later more specific
validation for guest-side PCI addresses when building the set of
assigned PCI addresses. For host-side PCI addresses (e.g. for
<hostdev> and for network device pools), we rely on the error that
will be logged when it is found that the device doesn't actually
exist.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1004596
In gnutls 3.4.3 there is a regression in the loading of private
keys via gnutls_x509_privkey_import. We already have a workaround
to deal with failures on older gnutls, but the error code that
the new gnutls returns is different. Extend the workaround so that
is checks for GNUTLS_E_REQUESTED_DATA_NOT_AVAILABLE too.
See also gnutls https://bugzilla.redhat.com/show_bug.cgi?id=1250020
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
PowerPC pseries based VMs do not support a floppy disk controller.
This prohibits libvirt from creating qemu command with floppy device.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1180486
Signed-off-by: Ján Tomko <jtomko@redhat.com>
