Since we know we have a modern qemu at hand which can interpret the
dotted syntax, we can format the -drive needed for SD cards via the
common infrastructure we have for all blockdev stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the generic frontend-less -drive code from qemuBuildDriveStr by
assuming that we support only blockdev-enabled qemus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With new qemu versions we setup floppies via -device.
Some legacy output tests were not modernized yet so the expected output
needs to be adjusted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that QEMU_CAPS_BLOCKDEV_HOSTDEV_SCSI is always set we can remove the
code which handled cases when the capability was not set.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device_id' property of 'scsi_disk' was added in qemu-4.0 and it's
unconditionally present, thus we can now always assume its presence.
Update some fake-caps test which didn't yet assert the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename qemuBuildAudioCommandLineArgs to qemuBuildAudioCommandLine and
fix the arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the old now unused code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Generate only new version of the '-audiodev' commandline. The leftover
old code and validation will be removed in subsequent patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch maps /domain/cpu/maxphysaddr into -cpu parameters:
- <maxphysaddr mode='passthrough'/> becomes host-phys-bits=on
- <maxphysaddr mode='emualte' bits='42'/> becomes phys-bits=42
Passthrough mode can only be used if the chosen CPU model is
'host-passthrough'. Also validate that an explicitly specified
bits value does not exceed the physical address bits on the host.
The feature is available since QEMU 2.7.0.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When parsing a TPM device plenty of virXMLPropString() +
enum2int() combos are used. These can be replaced with
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The qemuBuildMachineCommandLine() function is needlessly long.
Separate out parts that generate memory related arguments into
qemuAppendDomainMemoryMachineParams(). Unfortunately, expected
outputs for some qemuxml2argvdata cases needed to be updated
because the order in which arguments are generated is changed.
But there's no functional change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The qemuBuildMachineCommandLine() function is needlessly long.
Separate out parts that generate arguments based on
domainDef->features[] into
qemuAppendDomainFeaturesMachineParam(). Unfortunately, expected
outputs for some qemuxml2argvdata cases needed to be updated
because the order in which features are generated is changed. But
there's no functional change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Almost all of memory models we currently support allow setting
virDomainMemoryDef::targetNode so that the memory module is
associated with given guest NUMA node. And we do have a check
whether the requested node is within bounds, but it's executed
only when building QEMU's cmd line. Move it into validation
phase.
While this commit is moving the validation to a place that does
not validate all the possible code paths, it's okay, because only
the explicit memory device has user-configurable target node
which could break the assumption.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Note that we can only do this for intel-iommu and virtio-iommu,
which are configured using -device; smmuv3 is configured using
a machine type property, so there's no room on the command line
for an alias in that case.
https://bugzilla.redhat.com/show_bug.cgi?id=2108483
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU offers two attributes for handling reset requests of an USB
host device: guest-reset and guest-resets-all. When combined they
act as follows:
1) guest-reset=false
The guest is not allowed to reset the physical USB device.
2) guest-reset=true,guest-resets-all=false
The guest is allowed to reset the device when it is not yet
initialized (aka no USB bus address assigned). Usually this results
in one guest reset being allowed. This is the default behavior.
3) guest-reset=true,guest-resets-all=true
The guest is allowed to reset the device as it pleases.
Now, there's a clear 1:1 mapping with our representation of
guestReset, so generating cmd line is trivial.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemu `tpm-tis` device is an ISA device, so only really applicable
to x86 archs. For all non-x86 archs we should use `tpm-tis-device`
This fixes tpm-tis usage on armv7l and riscv
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Since we now have a full virStorageSource for storing the nvram path we
don't need the extra dance of transferring the data into the 'pflash1'
variable which was an intermediary solution to use -blockdev.
For now we keep it functionally identical to the previous impl.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Currently, libvirt allows only local filepaths to specify the location
of the 'nvram' image. Changing it to virStorageSource type will allow
supporting remote storage for nvram.
Signed-off-by: Prerna Saxena <prerna.saxena@nutanix.com>
Signed-off-by: Florian Schmidt <flosch@nutanix.com>
Signed-off-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Rohit Kumar <rohit.kumar3@nutanix.com>
When creating a TAP interface we can end up with multiple FDs,
each representing one queue. However, these FDs must be
relabelled as they are then passed to QEMU. In case of
qemuBuildInterfaceConnect() we allocate the array for the FDs and
then let function corresponding to the <interface/> type to fill
the array with FDs. When any of the functions meets an error,
it's also responsible for closing previously opened FDs. However,
the functions take a shortcut: iterate through each member of the
array and close it (if it's non-negative). This assumes that the
array is initialized to negative values, which use to be the case
before rewrite in v8.4.0-rc1~170 but after it it's no longer the
case. Subsequently, "random" FDs are closed (okay, not that
random since the array is allocated via g_new0(), but hey - FD 0
is still valid FD and might be valuable, actually).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2075383#c18
Fixes: 7a38d3946bc1a7ef0206f36dfe3dbf422fb8d578
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'STREQ' is used to compare the override alias with the device alias.
While the parser ensures that the override alias is non-NULL, the device
alias may be NULL and STREQ doesn't handle that.
Fixes: 38ab5c9ead5
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/321
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virStorageSourceGetActualType() function returns either
virStorageSource->type (which is of type virStorageType), or
virStorageSourcePoolDef->type, which really stores a value of the
same enum. Thus, the latter struct can be changed so that the
virStorageSourceGetActualType() function can return correct type
instead of generic int.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Like a Spice port, a dbus serial must specify an associated channel name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By default, libvirt will start a private bus and tell QEMU to connect to
it. Instead, a D-Bus "address" to connect to can be specified, or the
p2p mode enabled.
D-Bus display works best with GL & a rendernode, which can be specified
with <gl> child element.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that the 'direct' mode was separated and thus we don't have any
possible error case we can stop returning any values and simplify
callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unix socket chardevs with FD passing need to use the direct mode so we
need to convert it to use qemuFDPassDirect.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The commandline generated from our XML->native convertor is the majority
of cases not usable without libvirt anyways and the situation will not
improve any more.
As of such there's no much utility of avoiding the use of stopped CPUs
flag in such case.
Remove the QEMU_BUILD_COMMAND_LINE_CPUS_RUNNING flag and the associated
logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that we store the state of the host FIPS mode setting in the qemu
driver object, we don't need to outsource the logic into
'qemuCheckFips'.
Additionally since we no longer support very old qemu's which would not
yet have --enable-fips we can drop the part of the comment about very
old qemus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Improve the debug log inside 'qemuBuildCommandLine' to include the name
from the definition and remove useless data such as the pointer to the
qemuDriver object or qemuCaps.
Additionally remove the non-specific debug statements:
VIR_DEBUG("Building emulator command line");
from the two callers of qemuBuildCommandLine.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Rather than re-query all the time we can cache the state of FIPS of the
host as it will not change during the runtime of the guest.
Introduce a 'hostFips' flag to 'virQEMUDriver' and move the code
checking the state from 'qemuCheckFips' to 'qemuStateInitialize' and
also populate 'hostFips' in qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce 'qemuBuildCommandLineFlags' and use it instead of specific
flag booleans.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We already format a commandline using FD passing for the tap devices so
formatting the 'vhost' file descriptors won't make it any less usable
directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
