* src/Makefile.am (cov): Rewrite rule to merge gcov results corresponding
to two .o files: the libvirt_la- one, and the libvirt_test_la- one.
(tst): Remove unused rule.
* configure.in (LV_LIBTOOL_OBJDIR): Define and AC_SUBST.
* src/Makefile.am: Create a convenience library, libvirt_test.la,
and don't restrict access to *its* symbols.
* tests/Makefile.am (LDADDS): Add ../src/libvirt_test.la, so that
"configure --disable-shared" no longer provokes link errors.
(LIBVIRT): Remove definition.
(LDADDS): Remove use.
($(LIBVIRT)): Remove rule.
(LDADDS): Use the new convenience library instead.
(CLEANFILES): Define.
* docs/examples/index.py (dump_Makefile): Append $(COVERAGE_LDFLAGS),
to the LDADDS definition, to avoid link error with the combination of
--enable-test-coverage and --disable-shared.
* docs/examples/Makefile.am: Regenerate.
* docs/examples/index.html: Likewise.
* qemud/Makefile.am (libvirtd_LDFLAGS): Append $(COVERAGE_LDFLAGS).
* src/libvirt_sym.version: Remove some SP-before-TAB.
* src/util.c, src/util.h, src/libvirt_sym.version: Added
virMacAddrCompare utility function for comparing MAC
addresses.
* src/virsh.c, src/xm_internal.c: Use virMacAddrCompare
to compare addresses. (Shigeki Sakamoto and Richard Jones).
src/remote_internal.c src/test.c src/util.c src/util.h
src/xen_unified.c: added probe interface at the driver level,
use that to improve default hypervisor selection in the absence
of a given URI when connecting
Daniel
Also add "make syntax-check" rules to ensure no new uses sneak in.
There are many uses of write like this:
if (write (fd, xml, towrite) != towrite)
return -1;
The problem is that the syscall can succeed, yet write less than
the requested number of bytes, so the caller should retry
rather than simply failing.
This patch changes most of them to use util.c's safewrite wrapper,
which encapsulates the process. Also, there were a few cases in
which the retry loop was open-coded, and I replaced those, too.
* Makefile.maint (sc_avoid_write): New rule, to avoid recurrence.
* .x-sc_avoid_write: New file. Record two legitimate exemptions.
* qemud/qemud.c (sig_handler, qemudClientWriteBuf): Use safewrite, not write.
* src/conf.c (__virConfWriteFile): Likewise.
* src/qemu_conf.c (qemudSaveConfig, qemudSaveNetworkConfig): Likewise.
* src/qemu_driver.c (qemudWaitForMonitor, qemudStartVMDaemon)
(qemudVMData, PROC_IP_FORWARD): Likewise.
* proxy/libvirt_proxy.c: Include "util.h".
(proxyWriteClientSocket): Use safewrite.
* src/test.c (testDomainSave, testDomainCoreDump): Likewise.
* src/proxy_internal.c (virProxyWriteClientSocket): Likewise.
* src/virsh.c: Include "util-lib.h".
(vshOutputLogFile): Use safewrite.
* src/console.c: Include "util-lib.h".
(vshRunConsole): Use safewrite.
We currently use safewrite from inside libvirt and don't want to publish
any such function name. However, we do want to use it in applications
like virsh, libvirtd and libvirt_proxy that link with libvirt. To that
end, this change moves that function definition (along with the nearly
identical saferead) into a new file, util-lib.c. To avoid maintaining
separate copies of even such small functions, we simply include that new
file from util.c. Then, the separate applications that need to use
safewrite simply compile and link with util-lib.c.
Of course, this does mean that each of those applications will
containing two copies of these functions. However, the functions
are so small that it's not worth worrying about that.
* src/util.c (saferead, safewrite): Move function definitions to
util-lib.c and include that .c file.
* src/util-lib.c (saferead, safewrite): New file. Functions from src/util.c
with slight change (s/int r =/ssize_t r =/) to reflect read/write return type.
* src/util-lib.h: Declare the two moved functions.
* src/util.h: Remove declarations. Include src/util-lib.h.
* proxy/Makefile.am (libvirt_proxy_SOURCES): Add src/util-lib.c.
* qemud/Makefile.am (libvirtd_SOURCES): Likewise.
* src/Makefile.am (virsh_SOURCES): Add util-lib.c. Remove some SP-before-TAB.
* src/internal.h: move xstrol() variants from here ...
* src/util.[ch]: ... to here and rename to virStrToLong()
* src/libvirt_sym.version: export __virStrToLong_i() for
virsh and qemud.
* src/nodeinfo.c, src/stats_linux.c, src/virsh.c,
src/xend_internal.c, qemud/qemud.c: replace xstrtol()
calls with virStrToLong()
* src/nodeinfo.h: don't include internal.h, which was only
needed for xstrtol(), but instead include libvirt.h which
is suffificient for the declarations in the header.
Use <config.h>, not "config.h", per autoconf documentation.
* Makefile.cfg (local-checks-to-skip) [sc_require_config_h]: Enable.
* .x-sc_require_config_h: New file, to list exempted files.
* Makefile.am (EXTRA_DIST): Add .x-sc_require_config_h.
* configure.in: Use PortableXDR if available.
* qemud/internal.h: Use "socketcompat.h".
* qemud/qemud.c: Use <signal.h>.
* src/sexpr.c: Use <stdlib.h> instead of <malloc.h>.
* src/socketcompat.h: Include <sys/un.h> for Mac OS X.
A NUL byte at beginning of input, or just after a newline
would provoke an invalid buf[-1] access (possible segfault).
* src/libvirt.c (virConnectAuthCallbackDefault):
* src/qemu_conf.c: Add "static" and "const" attributes to some globals.
* src/qemu_conf.h: Update a declaration.
* src/qemu_driver.c (qemud_driver): Declare static.
Author: Jim Meyering <meyering@redhat.com>
a proposed system for letting iptables know how to
reload our rules. The proposed system wasn't accepted
so, although there might be some other theoretical
use for this, let's just remove it.
iptables configuration using the lokkit --custom-rules command.
Basically, we write out our rules to /var/lib/libvirt/iptables
and run lokkit --custom-rules so that if e.g. iptables is
restarted or the user edits their firewall configuration, then
libvirt's rules get reloaded.
* configure.in: xdr functions may require -lxdr.
* configure.in, src/Makefile.am: Extra linking flags for
building libvirt DLL.
* src/socketcompat.h: Hide Windows Winsock incompatibilities
in a separate header file.
* src/remote_internal.c: Switch to using socketcompat.h /
socket_errno().
* src/test.c: Switch to using socketcompat.h.
* gnulib/lib/arpa/.cvsignore: Ignore another generated file.
* src/qparams.c: Include <config.h>.
* src/qparams.c, src/qparams.h, src/Makefile.am: Added a
separate 'qparams' module for handling query parameters.
* src/remote_internal.c: Factor out query parameter code so
it uses the 'qparams' module.
* src/xs_internal.[ch]: patch from Saori Fukuta to fix the
detach-disk command when using Xen tap devices.
* docs/libvir.html: typo fix from Jim Meyering
Daniel
Given code like: T *var = calloc (n, sizeof (T));
Convert to this: T *var = calloc (n, sizeof (*var));
This first-cut change adjusts all malloc, calloc, and
realloc statements.
The only binary differences are in remote_internal.c
(due to the bug fix) and in xmlrpc.c (due to factorization).
* python/libvir.c: As above.
* qemud/event.c: Likewise.
* qemud/mdns.c: Likewise.
* qemud/qemud.c: Likewise.
* qemud/remote.c: Likewise.
* src/bridge.c: Likewise.
* src/buf.c: Likewise.
* src/conf.c: Likewise.
* src/hash.c: Likewise.
* src/iptables.c: Likewise.
* src/openvz_conf.c: Likewise.
* src/qemu_conf.c: Likewise.
* src/qemu_driver.c: Likewise.
* src/test.c: Likewise.
* src/xen_internal.c: Likewise.
* src/xen_unified.c: Likewise.
* src/xm_internal.c: Likewise.
* src/xml.c: Likewise.
* tests/qemuxml2argvtest.c: Likewise.
* src/xmlrpc.c (xmlRpcValuePtr): Likewise, and minor factorization.
* src/remote_internal.c (remoteAuthMakeCredentials): Use the right
type when allocating space for an array of cred _pointers_.
* src/console.c, src/console.h, src/virsh.c: Disable
text console on Windows.
* src/libvirt.c: Use replacement getpass from Gnulib.
* src/libvirt.c: Initialize Winsock before use.
* src/remote_internal.c: Header file fixes for Windows.
Don't fail if AI_ADDRCONFIG isn't defined. Disable
unsupported stuff under Windows.
* src/uuid.c: ENODATA unavailable on Windows, use EIO instead.
* src/virsh.c: No uid_t / getuid on Windows.
* src/virsh.c: No O_SYNC on Windows.
* src/.cvsignore: Ignore *.loT files (generated under Windows).
* proxy/libvirt_proxy.c: Bail out earlier --without-xen.
* src/proxy_internal.c: Don't build proxy client side if
configured --without-xen.
* src/iptables.c, src/iptables.h: Disable this code if
configured --without-qemu.
* src/nodeinfo.c: If no 'uname' function, set model name to
empty string (for Windows).
* src/xen_unified.h, src/util.c, src/test.c: Include <winsock2.h>
on Windows.
* src/util.c: Disable virExec* and virFileLinkPointsTo on
MinGW.
New files go into these directories:
gnulib/lib
gnulib/m4
gnulib/tests
* bootstrap: A wrapper around gnulib-tool.
* configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY
before any macro that uses AC_COMPILE_IFELSE.
(AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile.
* Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests
early enough that those tests run before any libvirt unit tests.
* m4/Makefile.am: Remove file. Not needed.
* src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib.
(LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la.
* src/nodeinfo.c: Include "physmem.h".
* qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h".
(MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions.
(virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate.
* tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib.
(LDADDS): Add ../gnulib/lib/libgnu.la.
* qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la.
* tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total
memory from a file.
Update expected output not to include "Memory: NNNN"
* tests/nodeinfodata/linux-nodeinfo-1.txt:
* tests/nodeinfodata/linux-nodeinfo-2.txt:
* tests/nodeinfodata/linux-nodeinfo-3.txt:
* tests/nodeinfodata/linux-nodeinfo-4.txt:
* tests/nodeinfodata/linux-nodeinfo-5.txt:
* tests/nodeinfodata/linux-nodeinfo-6.txt:
* src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that
would conflict with the one now in "config.h".
* autogen.sh: Add -I gnulib/m4.
* src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE.
Instead, include "config.h".
* qemud/qemud.c: Remove definition of _GNU_SOURCE.
* src/openvz_driver.c: Likewise.
* src/qemu_driver.c: Likewise.
* src/remote_internal.c: Likewise.
* configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch
of gettextize-generated files go into build-aux/, rather than in
the top-level directory.
* .cvsignore: Adjust.
* build-aux/.cvsignore: New file.
Author: Jim Meyering <meyering@redhat.com>
* python/libvir.c, python/libvirt_wrap.h, qemud/qemud.c,
qemud/remote.c, src/internal.h, src/openvz_conf.c,
src/openvz_driver.c, src/proxy_internal.h, src/qemu_conf.c,
src/qemu_driver.c, src/remote_internal.h, src/test.h, src/util.c,
src/xen_unified.c, src/xen_unified.h, tests/nodeinfotest.c,
tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c, tests/reconnect.c,
tests/sexpr2xmltest.c, tests/virshtest.c, tests/xencapstest.c,
tests/xmconfigtest.c, tests/xml2sexprtest.c:
Change #include <> to #include "" for local includes.
Removed many includes from src/internal.h and put them in
the C files which actually use them.
Removed <ansidecl.h> - unused.
Added a comment around __func__.
Removed a clashing redefinition of VERSION symbol.
All limits (PATH_MAX etc) now done in src/internal.h, so we
don't need to include those headers in other files.
* configure.in: curses is not actually required to build libvirt
* configure.in, src/virsh.c: Make readline optional. If not
available then virsh is built without support for command
line editing.
src/xend_internal.c src/xm_internal.c src/xs_internal.c:
cleanup the xen subdriver table, remove the type entry and
always return "Xen" from the unified entry point.
Daniel
* qemud/qemud.c (tls_port, tcp_port, mdns_name, tls_allowed_ip_list):
(tls_allowed_dn_list): Remove "const", now that we free these.
(unix_sock_rw_mask): Rename from unix_sock_rw_perms, so that
the latter name can be used as a local string variable, so that the
variable name matches the config attribute name.
(unix_sock_ro_mask): Rename from unix_sock_ro_perms, likewise.
(remoteCheckDN, remoteCheckAccess): Adapt to const removal.
(qemudDispatchServer): Check for heap allocation failure.
(remoteConfigGetStringList): New function, based on code from Dan Berrangé.
(CHECK_TYPE): Remove macro.
(checkType): New function.
(GET_CONF_INT, GET_CONF_STR): New macros.
(remoteReadConfigFile): Use new macros to avoid duplication and to
check for allocation failure.
* src/conf.h (virConfTypeName): New static inline function.
* configure.in: Added CYGWIN_EXTRA_LDFLAGS, CYGWIN_EXTRA_LIBADD,
CYGWIN_EXTRA_PYTHON_LIBADD, CYGWIN automake conditional.
* src/Makefile.am: Extra flags required to build DLL of libvirt
for Cygwin.
* python/Makefile.am: Extra flags and rule required to build
Python module for Cygwin.
prefix as the installed libvirt, use the same localstatedir /var
(instead of /usr/var) and sysconfdir /etc (instead of /usr/etc) to
be able to connect to the system daemon, and use the system local
options
* src/xs_internal.c: avoid error message when non-root cannot open
xenstore
* src/xend_internal.c: avoid error message when non-root cannot
directly access xend, in those 2 cases the proxy (or remote code)
should implement the access so there is no need to raise the error
there.
Daniel
* src/bridge.c, src/bridge.h, src/qemu_conf.c, src/qemu_conf.h,
src/qemu_driver.c, src/qemu_driver.h, src/test.c: Disable more
of qemu if configured --without-qemu.
* configure.in, src/internal.h, src/xml.c: <sys/syslimits.h>
is needed on Cygwin to get PATH_MAX. HOST_NAME_MAX and
IF_NAMESIZE defined if not in header files.
* src/stats_linux.c: Fix parsing of short interface names
occurring in the /proc/net/dev file.
* src/qemu_driver.c: Collect interface stats for QEMU & KVM
domains.
* docs/hvsupport.html, docs/libvir.html: Document HV support
for virNodeGetFreeMemory and virNodeGetCellsFreeMemory.
* src/libvirt.c: Add DEBUG to virNodeGetFreeMemory and
virNodeGetCellsFreeMemory.
* src/xen_internal.c: virXenError* functions now take an
additional virConnectPtr argument, and set it where possible.
* src/stats_linux.c, src/stats_linux.h, src_xen_internal.c:
Abstract out the Linux-specific statistics. Fixed parsing
of 64 bit numbers.
* src/Makefile.am: Updated Makefile for new files.
* qemud/qemud.c: Replace uses of strtol with uses of xstrtol_i.
Avoid overflow for very large --timeout=N values.
* src/nodeinfo.c: In linuxNodeInfoMemPopulate and
linuxNodeInfoCPUPopulate, use xstrtol_i rather than strtol.
Unlike in qemud.c, here we allow trailing "isspace", and in
the case of "cpuinfo cpu MHz", also allow a "." terminator,
since we ignore the decimal and any following digits.
* src/internal.h: Define xstrtol_ui, too.
Author: Jim Meyering <meyering@redhat.com>
Patch from Jim Meyering
* src/internal.h: Include <errno.h>.
Define new static inline function, xstrtol_i.
* src/virsh.c: Detect integer overflow in domain ID number
in vshCommandOptDomainBy. Detect overflow and invalid port
number suffix in cmdVNCDisplay.
* src/xend_internal.c: Parse CPU number more carefully in
xenDaemonDomainGetVcpus.
* tests/int-overflow: New script. Test for the above-fixed bug.
* tests/Makefile.am: Add int-overflow to TESTS. Define
TESTS_ENVIRONMENT, to propagate $abs_top_* variables into the
int-overflow script. Adapt the "valgrind" rule not to clobber
new TESTS_ENVIRONMENT.
Daniel
Avoid risk of format string abuse (also avoids gcc warnings).
* src/util.c (ReportError): Use a literal "%s" format string.
* src/remote_internal.c (server_error): Likewise.
* src/qemu_conf.c (qemudReportError): Likewise.
* acinclude.m4: Add -Wformat -Wformat-security to default
list of warning flags, to warn about errors such as the
above.
src/xen_unified.[ch] src/xend_internal.[ch] src/xml.[ch]: last
patch for the library NUMA support, allow to serialize CPU pinning
to domain configs (but won't work though proxy access), includes
many patches from Saori Fukuta.
Daniel
