GCC 10 complains about variables may be used uninitialized.
Even though it might be false positives, we can easily avoid them.
Avoiding
../src/storage/storage_backend_iscsi_direct.c:634:11: error: ‘nb_block’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
634 | while (lba < nb_block) {
| ^
../src/storage/storage_backend_iscsi_direct.c:619:14: note: ‘nb_block’ was declared here
619 | uint64_t nb_block;
| ^~~~~~~~
../src/storage/storage_backend_iscsi_direct.c:637:16: error: ‘block_size’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
637 | task = iscsi_write16_sync(iscsi, lun, lba, data,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
638 | block_size * to_write,
| ~~~~~~~~~~~~~~~~~~~~~~
639 | block_size, 0, 0, 0, 0, 0);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/storage/storage_backend_iscsi_direct.c:618:14: note: ‘block_size’ was declared here
618 | uint32_t block_size;
| ^~~~~~~~~~
../src/storage/storage_backend_iscsi_direct.c: In function ‘virStorageBackendISCSIDirectRefreshPool’:
../src/storage/storage_backend_iscsi_direct.c:320:39: error: ‘nb_block’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
320 | vol->target.capacity = block_size * nb_block;
| ~~~~~~~~~~~^~~~~~~~~~
../src/storage/storage_backend_iscsi_direct.c:306:14: note: ‘nb_block’ was declared here
306 | uint64_t nb_block;
| ^~~~~~~~
../src/storage/storage_backend_iscsi_direct.c:320:39: error: ‘block_size’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
320 | vol->target.capacity = block_size * nb_block;
| ~~~~~~~~~~~^~~~~~~~~~
../src/storage/storage_backend_iscsi_direct.c:305:14: note: ‘block_size’ was declared here
305 | uint32_t block_size;
| ^~~~~~~~~~
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
GCC 10 complains about "well_formed_uri" may be used uninitialzed.
Even though it is a false positive, we can easily avoid it.
Avoiding
../src/qemu/qemu_migration.c: In function ‘qemuMigrationDstPrepareDirect’:
../src/qemu/qemu_migration.c:2920:16: error: ‘well_formed_uri’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2920 | if (well_formed_uri) {
| ^
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
sc_spacing-check FAIL reporting a case of "Curly brackets around
single-line body:" in a recent commit.
Fixes: d9c21f4b "apparmor: allow adding permanent per guest rules"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
With qemu 5.0 and libvirt 6.6 there are new apparmor denials:
apparmor="DENIED" operation="umount" profile="libvirtd"
name="/run/libvirt/qemu/1-kvmguest-groovy-norm.dev/" comm="rpc-worker"
These are related to new issues around devmapper handling [1] and the
error path triggered by these issues now causes this new denial.
There are already related rules for mounting and it seems right to
allow also the related umount.
[1]: https://www.redhat.com/archives/libvir-list/2020-August/msg00236.html
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The design of apparmor in libvirt always had a way to define custom
per-guest rules as described in docs/drvqemu.html and [1].
A fix meant to clean the profiles after guest shutdown was a bit
overzealous and accidentially removed this important admin feature as
well.
Therefore reduce the --delete option of virt-aa-helper to only delete
the .files that would be re-generated in any case.
Users/Admins are always free to clean the profiles themselve if they
prefer a clean directory - they will be regenerated as needed. But
libvirt should never remove the base profile meant to allow per-guest
overrides and thereby break a documented feature.
[1]: https://gitlab.com/apparmor/apparmor/-/wikis/Libvirt#advanced-usage
Fixes: eba2225b "apparmor: delete profile on VM shutdown"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If we don't have cgroups available and user tries to update blkio
parameters for running VM it will crash.
It should have been protected by the virCgroupHasController() check but
it was never called if the API was executed without any flags.
We call virDomainObjGetDefs() which sets `def` and `persistentDef` based
on the flags and these two variables should be used to figure out if we
need to update LIVE, CONFIG or both states.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1808293
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
src/bhyve/bhyve_parse_command.c:437:9: warning: Either the condition
'!config' is redundant or there is possible null pointer dereference:
config. [nullPointerRedundantCheck]
src/bhyve/bhyve_parse_command.c:280:23: warning: Either the condition
'!separator' is redundant or there is pointer arithmetic
with NULL pointer. [nullPointerArithmeticRedundantCheck]
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
BPF syscall BPF_MAP_GET_NEXT_KEY returns -1 if something fails but it
will also return -1 if trying to get next key using the last key in the
map with errno set to ENOENT.
If there are VMs running and libvirtd is restarted and user tries to
call some cgroup devices operation on a VM we need to get the count of
entries in BPF map and it fails which will result in error when trying
to attach/detech devices.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1833321
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since [1] qemu can after upgrade fall back to pre-upgrade modules
to still be able to dynamically load qemu-module based features.
The paths for these modules are pre-defined by the code and should
be allowed to be mapped and loaded from which will allow packagers
avoiding the inability of late feature load [2] after package upgrades.
[1]: https://github.com/qemu/qemu/commit/bd83c861
[2]: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1847361
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange redhat com>
On some architectures (ppc, s390x, sparc, arm) qemu will read auxv
to detect hardware capabilities via qemu_getauxval.
Allow that access read-only for the entry owned by the current
qemu process.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
Allow qemu to read @{PROC}/sys/vm/overcommit_memory.
This is read on guest start-up and (as read-only) not a
critical secret that has to stay hidden.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Jamie Strandboge <jamie@ubuntu.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When using xen through libxl in Debian/Ubuntu it needs to be able to
call pygrub.
This is placed in a versioned path like /usr/lib/xen-4.11/bin.
In theory the rule could be more strict by rendering the libexec_dir
setting pkg-config can derive from libbxen-dev. But that would make
particular libvirt/xen packages version-depend on each other. It seems
more reasonable to avoid these versioned dependencies and use a wildcard
rule instead as it is already in place for libxl-save-helper.
Note: This change was in Debian [1] and Ubuntu [2] for quite some time
already.
[1]: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=931768
[2]: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1326003
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
/etc/pki/qemu is a pki path recommended by qemu tls docs [1]
and one that can cause issues with spice connections when missing.
Add the path to the allowed list of pki paths to fix the issue.
Note: this is active in Debian/Ubuntu [1] for quite a while already.
[1]: https://www.qemu.org/docs/master/system/tls.html
[2]: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=930100
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Acked-by: Jamie Strandboge <jamie@canonical.com>
Following the rationale from commit
<2020c6af8a8e4bb04acb629d089142be984484c8> we should do the same thing
for iothread info as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit <6328da04285d9f65cb323d399f731c20caf63f5a> introduced
testDomainGetEmulatorPinInfo() into test driver but used
virHostCPUGetCount() function to get the number of host CPUs.
This would be correct for other drivers but in test driver we must not
depend on the host, we have to use hard-coded host representation that
we have in test driver.
Follows the logic of testDomainGetVcpuPinInfo().
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit <2020c6af8a8e4bb04acb629d089142be984484c8> fixed an issue with
QEMU driver by reporting offline CPUs as well. However, doing so it
introduced a regression into libxl and test drivers by completely
ignoring the passed `hostcpus` variable.
Move the virHostCPUGetAvailableCPUsBitmap() out of the helper into QEMU
driver so it will not affect other drivers which gets the number of host
CPUs differently.
This was uncovered by running libvirt-dbus test suite which counts on
the fact that test driver has hard-coded host definition and must not
depend on the host at all.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is not expose in most historical versions of glibc, nor
non-glibc impls. We must use our wrapper API instead.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If a Ctrl-C arrives while we are in the middle of executing the
virDomainCreateXML call, we will have no "virDomainPtr" object
available, but QEMU may none the less be running.
This means we'll never try to stop the QEMU process before we
honour the Ctrl-C and exit.
To deal with this race we need to postpone quit of the event
loop if it is requested while in the middle of domain startup.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is a race between vir_event_thread_finalize and
virEventThreadWorker in releasing the last reference on
the GMainContext. If virEventThreadDataFree() runs after
vir_event_thread_finalize releases its reference, then
it will release the last reference on the GMainContext.
As a result g_autoptr cleanup on the GSource will access
free'd memory.
The race can be seen in non-deterministic crashes of the
virt-run-qemu program during its shutdown, but could
also likely affect the main libvirtd QEMU driver:
Thread 2 (Thread 0x7f508ffff700 (LWP 222813)):
#0 0x00007f509c8e26b0 in malloc_consolidate (av=av@entry=0x7f5088000020) at malloc.c:4488
#1 0x00007f509c8e4b08 in _int_malloc (av=av@entry=0x7f5088000020, bytes=bytes@entry=2048) at malloc.c:3711
#2 0x00007f509c8e6412 in __GI___libc_malloc (bytes=2048) at malloc.c:3073
#3 0x00007f509d6e925e in g_realloc (mem=0x0, n_bytes=2048) at gmem.c:164
#4 0x00007f509d705a57 in g_string_maybe_expand (string=string@entry=0x7f5088001f20, len=len@entry=1024) at gstring.c:102
#5 0x00007f509d705ab6 in g_string_sized_new (dfl_size=dfl_size@entry=1024) at gstring.c:127
#6 0x00007f509d708c5e in g_test_log_dump (len=<synthetic pointer>, msg=<synthetic pointer>) at gtestutils.c:3330
#7 0x00007f509d708c5e in g_test_log
(lbit=G_TEST_LOG_ERROR, string1=0x7f508800fcb0 "GLib:ERROR:ghash.c:377:g_hash_table_lookup_node: assertion failed: (hash_table->ref_count > 0)", string2=<optimized out>, n_args=0, largs=0x0) at gtestutils.c:975
#8 0x00007f509d70af2a in g_assertion_message
(domain=<optimized out>, file=0x7f509d7324a2 "ghash.c", line=<optimized out>, func=0x7f509d732750 <__func__.11348> "g_hash_table_lookup_node", message=<optimized out>)
at gtestutils.c:2504
#9 0x00007f509d70af8e in g_assertion_message_expr
(domain=domain@entry=0x7f509d72d76e "GLib", file=file@entry=0x7f509d7324a2 "ghash.c", line=line@entry=377, func=func@entry=0x7f509d732750 <__func__.11348> "g_hash_table_lookup_node", expr=expr@entry=0x7f509d732488 "hash_table->ref_count > 0") at gtestutils.c:2555
#10 0x00007f509d6d197e in g_hash_table_lookup_node (hash_table=0x55b70ace1760, key=<optimized out>, hash_return=<synthetic pointer>) at ghash.c:377
#11 0x00007f509d6d197e in g_hash_table_lookup_node (hash_return=<synthetic pointer>, key=<optimized out>, hash_table=0x55b70ace1760) at ghash.c:361
#12 0x00007f509d6d197e in g_hash_table_remove_internal (hash_table=0x55b70ace1760, key=<optimized out>, notify=1) at ghash.c:1371
#13 0x00007f509d6e0664 in g_source_unref_internal (source=0x7f5088000b60, context=0x55b70ad87e00, have_lock=0) at gmain.c:2103
#14 0x00007f509d6e1f64 in g_source_unref (source=<optimized out>) at gmain.c:2176
#15 0x00007f50a08ff84c in glib_autoptr_cleanup_GSource (_ptr=<synthetic pointer>) at /usr/include/glib-2.0/glib/glib-autocleanups.h:58
#16 0x00007f50a08ff84c in virEventThreadWorker (opaque=0x55b70ad87f80) at ../../src/util/vireventthread.c:114
#17 0x00007f509d70bd4a in g_thread_proxy (data=0x55b70acf3850) at gthread.c:784
#18 0x00007f509d04714a in start_thread (arg=<optimized out>) at pthread_create.c:479
#19 0x00007f509c95cf23 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
Thread 1 (Thread 0x7f50a1380c00 (LWP 222802)):
#0 0x00007f509c8977ff in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
#1 0x00007f509c881c35 in __GI_abort () at abort.c:79
#2 0x00007f509d72a823 in g_mutex_clear (mutex=0x55b70ad87e00) at gthread-posix.c:1307
#3 0x00007f509d72a823 in g_mutex_clear (mutex=mutex@entry=0x55b70ad87e00) at gthread-posix.c:1302
#4 0x00007f509d6e1a84 in g_main_context_unref (context=0x55b70ad87e00) at gmain.c:582
#5 0x00007f509d6e1a84 in g_main_context_unref (context=0x55b70ad87e00) at gmain.c:541
#6 0x00007f50a08ffabb in vir_event_thread_finalize (object=0x55b70ad83180 [virEventThread]) at ../../src/util/vireventthread.c:50
#7 0x00007f509d9c48a9 in g_object_unref (_object=<optimized out>) at gobject.c:3340
#8 0x00007f509d9c48a9 in g_object_unref (_object=0x55b70ad83180) at gobject.c:3232
#9 0x00007f509583d311 in qemuProcessQMPFree (proc=proc@entry=0x55b70ad87b90) at ../../src/qemu/qemu_process.c:8355
#10 0x00007f5095790f58 in virQEMUCapsInitQMPSingle
(qemuCaps=qemuCaps@entry=0x55b70ad88010, libDir=libDir@entry=0x55b70ad049e0 "/tmp/virt-qemu-run-VZC9N0/lib/qemu", runUid=runUid@entry=107, runGid=runGid@entry=107, onlyTCG=onlyTCG@entry=false) at ../../src/qemu/qemu_capabilities.c:5409
#11 0x00007f509579108f in virQEMUCapsInitQMP (runGid=107, runUid=107, libDir=0x55b70ad049e0 "/tmp/virt-qemu-run-VZC9N0/lib/qemu", qemuCaps=0x55b70ad88010)
at ../../src/qemu/qemu_capabilities.c:5420
#12 0x00007f509579108f in virQEMUCapsNewForBinaryInternal
(hostArch=VIR_ARCH_X86_64, binary=binary@entry=0x55b70ad7dc40 "/usr/libexec/qemu-kvm", libDir=0x55b70ad049e0 "/tmp/virt-qemu-run-VZC9N0/lib/qemu", runUid=107, runGid=107, hostCPUSignature=0x55b70ad01320 "GenuineIntel, Intel(R) Xeon(R) Silver 4210 CPU @ 2.20GHz, family: 6, model: 85, stepping: 7", microcodeVersion=83898113, kernelVersion=0x55b70ad00d60 "4.18.0-211.el8.x86_64 #1 SMP Thu Jun 4 08:08:16 UTC 2020") at ../../src/qemu/qemu_capabilities.c:5472
#13 0x00007f5095791373 in virQEMUCapsNewData (binary=0x55b70ad7dc40 "/usr/libexec/qemu-kvm", privData=0x55b70ad5b8f0) at ../../src/qemu/qemu_capabilities.c:5505
#14 0x00007f50a09a32b1 in virFileCacheNewData (name=0x55b70ad7dc40 "/usr/libexec/qemu-kvm", cache=<optimized out>) at ../../src/util/virfilecache.c:208
#15 0x00007f50a09a32b1 in virFileCacheValidate (cache=cache@entry=0x55b70ad5c030, name=name@entry=0x55b70ad7dc40 "/usr/libexec/qemu-kvm", data=data@entry=0x7ffca39ffd90)
at ../../src/util/virfilecache.c:277
#16 0x00007f50a09a37ea in virFileCacheLookup (cache=cache@entry=0x55b70ad5c030, name=name@entry=0x55b70ad7dc40 "/usr/libexec/qemu-kvm") at ../../src/util/virfilecache.c:310
#17 0x00007f5095791627 in virQEMUCapsCacheLookup (cache=0x55b70ad5c030, binary=0x55b70ad7dc40 "/usr/libexec/qemu-kvm") at ../../src/qemu/qemu_capabilities.c:5647
#18 0x00007f50957c34c3 in qemuDomainPostParseDataAlloc (def=<optimized out>, parseFlags=<optimized out>, opaque=<optimized out>, parseOpaque=0x7ffca39ffe18)
at ../../src/qemu/qemu_domain.c:5470
#19 0x00007f50a0a34051 in virDomainDefPostParse
(def=def@entry=0x55b70ad7d200, parseFlags=parseFlags@entry=258, xmlopt=xmlopt@entry=0x55b70ad5d010, parseOpaque=parseOpaque@entry=0x0)
at ../../src/conf/domain_conf.c:5970
#20 0x00007f50a0a464bb in virDomainDefParseNode
(xml=xml@entry=0x55b70aced140, root=root@entry=0x55b70ad5f020, xmlopt=xmlopt@entry=0x55b70ad5d010, parseOpaque=parseOpaque@entry=0x0, flags=flags@entry=258)
at ../../src/conf/domain_conf.c:22520
#21 0x00007f50a0a4669b in virDomainDefParse
(xmlStr=xmlStr@entry=0x55b70ad5f9e0 "<domain type='kvm'>\n <name>83</name>\n <uuid>9350639d-1c8a-4f51-a4a6-4eaf8eabe83e</uuid>\n <metadata>\n <libosinfo:libosinfo xmlns:libosinfo=\"http://libosinfo.org/xmlns/libvirt/domain/1.0\">\n <"..., filename=filename@entry=0x0, xmlopt=0x55b70ad5d010, parseOpaque=parseOpaque@entry=0x0, flags=flags@entry=258) at ../../src/conf/domain_conf.c:22474
#22 0x00007f50a0a467ae in virDomainDefParseString
(xmlStr=xmlStr@entry=0x55b70ad5f9e0 "<domain type='kvm'>\n <name>83</name>\n <uuid>9350639d-1c8a-4f51-a4a6-4eaf8eabe83e</uuid>\n <metadata>\n <libosinfo:libosinfo xmlns:libosinfo=\"http://libosinfo.org/xmlns/libvirt/domain/1.0\">\n <"..., xmlopt=<optimized out>, parseOpaque=parseOpaque@entry=0x0, flags=flags@entry=258)
at ../../src/conf/domain_conf.c:22488
#23 0x00007f50958ce112 in qemuDomainCreateXML
(conn=0x55b70acf9090, xml=0x55b70ad5f9e0 "<domain type='kvm'>\n <name>83</name>\n <uuid>9350639d-1c8a-4f51-a4a6-4eaf8eabe83e</uuid>\n <metadata>\n <libosinfo:libosinfo xmlns:libosinfo=\"http://libosinfo.org/xmlns/libvirt/domain/1.0\">\n <"..., flags=0) at ../../src/qemu/qemu_driver.c:1744
#24 0x00007f50a0c268ac in virDomainCreateXML
(conn=0x55b70acf9090, xmlDesc=0x55b70ad5f9e0 "<domain type='kvm'>\n <name>83</name>\n <uuid>9350639d-1c8a-4f51-a4a6-4eaf8eabe83e</uuid>\n <metadata>\n <libosinfo:libosinfo xmlns:libosinfo=\"http://libosinfo.org/xmlns/libvirt/domain/1.0\">\n <"..., flags=0) at ../../src/libvirt-domain.c:176
#25 0x000055b709547e7b in main (argc=<optimized out>, argv=<optimized out>) at ../../src/qemu/qemu_shim.c:289
The solution is to explicitly unref the GSource at a safe time instead
of letting g_autoptr unref it when leaving scope.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is a fairly long standing race condition bug in glib which can hit
if you call g_source_destroy or g_source_unref from a non-main thread:
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/1358
Unfortunately it is really common for libvirt to call g_source_destroy
from a non-main thread. This glib bug is the cause of non-determinstic
crashes in eventtest, and probably in libvirtd too.
To work around the problem we need to ensure that we never release
the last reference on a GSource from a non-main thread. The previous
patch replaced our use of g_source_destroy with a pair of
g_source_remove and g_source_unref. We can now delay the g_source_unref
call by using a idle callback to invoke it from the main thread which
avoids the race condition.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The source ID number is an alternative way to identify a source that has
been added to a GMainContext. Internally when a source ID is given, glib
will lookup the corresponding GSource and use that. The use of a source
ID is racy in some cases though, because it is invalid to continue to
use an ID number after the GSource has been removed. It is thus safer
to use the GSource object directly and have full control over the ref
counting and thus cleanup.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When COW is not explicitly requested to be disabled or enabled, the
function is supposed to do nothing on non-BTRFS file systems.
Fixes commit 7230bc95aa.
https://bugzilla.redhat.com/show_bug.cgi?id=1866157
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
and stop erroneously equating NULL with "". The latter means that the
element has empty content, while the former means there was an error
during parsing (either internal with the parser, or the content of the
XML was bad).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Many of our calls to xmlNodeGetContent() (which are now all via
virXMLNodeContentString() are failing to check for a NULL return. We
need to remedy that, but in order to make the remedy simpler, let's
log an error in virXMLNodeContentString(), so that the callers don't
all individually need to (since it would be the same error message for
all of them anyway).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virDomainBlkioDeviceParseXML() calls xmlNodeGetContent() multiple
times in a loop, but can easily be refactored to call it once for all
element nodes, and then use the result of that one call in each of the
(mutually exclusive) blocks that previously each had their own call to
xmlNodeGetContent.
This is being done in order to reduce the number of changes needed in
an upcoming patch that will eliminate the lack of checking for NULL on
return from xmlNodeGetContent().
As part of the simplification, the while() loop has been changed into
a for() so that we can use "continue" without bypassing the
"node = node->next".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We should prevent inlining of symbols from the driver .so files that are
mocked, as well as those in the main libvirt.so
This isn't fixing any currently known problem, just trying to prevent
future issues.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We already allow controlling the initiator IQN for iSCSI based disks.
Add the same for host devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Whenever libvirt is upgraded on a Debian system, the user will be
prompted along the lines of
Configuration file '/etc/libvirt/qemu/networks/default.xml'
==> Modified (by you or by a script) since installation.
==> Package distributor has shipped an updated version.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** default.xml (Y/I/N/O/D/Z) [default=N] ? d
--- /etc/libvirt/qemu/networks/default.xml 2020-08-04 12:57:25.450911143 +0200
+++ /etc/libvirt/qemu/networks/default.xml.dpkg-new 2020-08-03 22:47:15.000000000 +0200
@@ -1,19 +1,11 @@
-<!--
-WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE
-OVERWRITTEN AND LOST. Changes to this xml configuration should be made using:
- virsh net-edit default
-or other application using the libvirt API.
--->
-
<network>
<name>default</name>
- <uuid>612a2cab-72fb-416d-92bc-4d9e597bfb63</uuid>
- <forward mode='nat'/>
- <bridge name='virbr0' stp='on' delay='0'/>
- <mac address='52:54:00:1f:03:79'/>
- <ip address='192.168.122.1' netmask='255.255.255.0'>
+ <uuid>d020b839-4379-492c-aa74-eab7365076e6</uuid>
+ <bridge name="virbr0"/>
+ <forward/>
+ <ip address="192.168.122.1" netmask="255.255.255.0">
<dhcp>
- <range start='192.168.122.2' end='192.168.122.254'/>
+ <range start="192.168.122.2" end="192.168.122.254"/>
</dhcp>
</ip>
</network>
The UUID situation should probably be handled the same way it is
in the spec file by stripping it, and in general we could behave
much better towards users, but one part of the diff that
immediately stands out is that some lines are highlighted not
because they are semantically different, but simply because they
use different types of quotes around attributes.
Since the canonical version of all libvirt XML documents (as
returned by the various vir*GetXMLDesc() APIs) as well as the
on-disk representations use single quotes, let's use the same
for configuration files we install as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If there's a list of mdevs to be assigned to a domain, but one of them
(NOT the first) is already assigned to a different domain we're going
to crash in the qemuProcessStop phase in
virMediatedDeviceListFindIndex, because some of the pointers in
mgr->activeMediatedHostdevs are dangling. This is due to
virMediatedDeviceListMarkDevices using cleanup instead of rollback when
we find out that a device is already taken.
Reproducer steps:
1. start vm1 with mdev1
2. start vm2 with mdev2, mdev1 (the order is important!)
Backtrace:
#0 0x0000ffffb8c36250 in strcmp
#1 0x0000ffffb9b80754 in virMediatedDeviceListFindIndex
#2 0x0000ffffb9b80870 in virMediatedDeviceListFind
#3 0x0000ffffb9c9e168 in virHostdevReAttachMediatedDevices
#4 0x0000ffff9949f724 in qemuHostdevReAttachMediatedDevices
#5 0x0000ffff9949f7f8 in qemuHostdevReAttachDomainDevices
#6 0x0000ffff994bcd70 in qemuProcessStop
#7 0x0000ffff994bf4e0 in qemuProcessStart
Signed-off-by: Binfeng Wu <wubinfeng@huawei.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The header log_manager.h doesn't use anything from log_protocol.h and
the only other place than logging using log_protocol.h is qemu_command.c
where we can include log_protocol.h directly to have enum value
VIR_LOG_MANAGER_PROTOCOL_DOMAIN_OPEN_LOG_FILE_TRUNCATE available.
Fixes race-condition compilation error with meson:
In file included from ../tests/qemuhotplugmock.c:21:
In file included from ../src/qemu/qemu_hotplug.h:25:
In file included from ../src/qemu/qemu_domain.h:42:
../src/logging/log_manager.h:25:10: fatal error: 'logging/log_protocol.h' file not found
^~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Reported-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
During the switch to meson, one of the patches mistakenly changed the
runtime socket prefix for {libvirtd, virtproxyd} to "libvirtd-" from
the original "libvirt-". Not to be mistaken with the systemd unit name
which actually follows the daemon name, IOW the systemd unit name
remains as e.g. "libvirtd.socket", but the actual unix socket created
on the filesystem that the daemon binds to must be named "libvirt-sock"
and not "libvirtd-sock".
Fixes: dd4f2c73ad
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can use qemuDomainSetupInput() to obtain the path that we
need to unlink() from within domain's namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use qemuDomainSetupRNG() to obtain the path that we
need to unlink() from within domain's namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use qemuDomainSetupChardev() to obtain the path that we
need to unlink() from within domain's namespace. Note, while
previously we unlinked only VIR_DOMAIN_CHR_TYPE_DEV chardevs,
with this change we unlink some other types too - exactly those
types we created when plugging the device in.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use qemuDomainSetupMemory() to obtain the path that we
need to unlink() from within domain's namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In my attempt to deduplicate the code, we can use
qemuDomainSetupHostdev() to obtain the list of paths to unlink
and then pass it to qemuDomainNamespaceUnlinkPaths() to unlink
them in a single fork.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far, the only caller qemuDomainNamespaceUnlinkPath() will
always pass a single path to unlink, but similarly to
qemuDomainNamespaceMknodPaths() - there are a few callers that
would like to pass two or more files to unlink at once (held in a
string list). Make the @paths argument a string list then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simirarly to qemuDomainAttachDeviceMknodHelper() which was
modified just a couple of commits ago, modify the unlink helper
which is called on device detach so that it can unlink multiple
files in one go instead of forking off for every single one of
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanup, creating /dev nodes from pre-exec hook is
no longer needed and thus can be removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain SEV into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain loader into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain RNGs into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain inputs into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain graphics (render node)
into daemon's namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain TPM into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain chardevs into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain memory (nvdimms) into
daemon's namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
