Add testing of the host specification part so that we can be sure that
no image/host specific data will be present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When formatting new qcow2 images we need to provide the backing store
string which should not contain any authentication or irrelevant data.
Add a flag for qemuBlockStorageSourceGetBackendProps which allows to
skip the irrelevant data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'blockdev-create' starts a job which creates a storage volume using
the given protocol or formats an existing (added) volume with one of the
supported storage formats.
This patch adds the monitor interaction bits.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new event is a superset of the BLOCK_JOB* events and also covers
jobs which don't bind to a VM disk.
In this patch the monitor part is implemented.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This belongs to the new job management API which can manage also
non-block based jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This belongs to the new job management API which can manage also
non-block based jobs. Since we'll need to be able to attempt to cancel
jobs which potentially were not started (during reconnect) the 'quiet'
flag allows to suppress errors reported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This belongs to the new job management API for generic jobs.
The dismiss command is meant to remove a concluded job after we were
able to get the final status.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow using the delayed dismiss of the job so that we can reap the state
even if libvirtd was not running when qemu emitted the job completion
event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow using the node name to specify the base and top of the 'commit'
operation, allow specifying explicit job name and add support for
delayed dismiss of the job so that we can reap the state even if
libvirtd was not running when qemu emitted the job completion event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow using the node name to specify the base of the 'stream' operation,
allow specifying explicit job name and add support for delayed dismiss
of the job so that we can reap the state even if libvirtd was not
running when qemu emitted the job completion event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When querying storage metadata after a block job we re-run
virStorageFileGetMetadata on the top level storage file. This means that
the workers (virStorageFileGetMetadataInternal) must not overwrite any
pointers without freeing them.
This was not considered for src->compat and src->features. Fix it and
add a comment mentioning that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function does not do any cleanup, so replace the 'cleanup' label
with return of -1 and the 'done' label with return of 0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since fb9f6ce625 we are including a libxml header file in the
network driver but never link with it. This hasn't caused an
immediate problem because in the end the network driver links
with libvirt.la. But apparently, it's causing a build issue on
old Ubuntu.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a very simple completer for completing --cap argument of
nodedev-list command.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There are more arguments than 'shutdown --mode' that accept a
list of strings separated by commas. 'nodedev-list --cap' is one
of them. To avoid duplicating code, let's separate interesting
bits of virshDomainShutdownModeCompleter() into a function that
can then be reused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If there are two paths on the list that are the same we need to
lock it only once. Because when we try to lock it the second time
then open() fails. And if it didn't, locking it the second time
would fail for sure. After all, it is sufficient to lock all
paths just once satisfy the caller.
Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Document why we need to sort paths while it's still fresh in my
memory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This commit is similar with 596aa144. It fixes an uninitialized
variable to avoid garbage value. This case, it uses time 't' 0 if
an error occurs with virTimeMillisNowRaw.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pass an xmlopt argument through all the needed network conf
functions, like is done for domain XML handling. No functional
change for now
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Just a stub for now that is unused. Add init+cleanup plumbing and
demostrate it in bridge_driver.c
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Wrap each release headline in an <a> element with the id set
to the release value and page.xsl will take care of the rest.
Reported-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Set a default namespace in the stylesheet instead.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Having a translation enum full of empty strings seems excessive.
Now that the validiation is performed in qemuDomainDeviceDefValidateFS,
remove it completely and open-code the two allowed cases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Introduce two separate variables instead of reusing the same one
for clarity.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This function iterates over all filesystems, not just -fsdevs.
Rename it to free the name for a function that actually builds fsdevs.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Use the existing fs9p.xml and fs9p-ccw.xml to run the tests
with latest caps on x86_64 and s390x.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
When spawning a child process, between fork() and exec() we close
all file descriptors and keep only those the caller wants us to
pass onto the child. The problem is how we do that. Currently, we
get the limit of opened files and then iterate through each one
of them and either close() it or make it survive exec(). This
approach is suboptimal (although, not that much in default
configurations where the limit is pretty low - 1024). We have
/proc where we can learn what FDs we hold open and thus we can
selectively close only those.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I will optimize this code a bit in the next commit. But for that
it is better if the code lives in a separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Test if our parsing of interface stats as returned by ovs-vsctl
works as expected. To achieve this without having to mock
virCommand* I'm separating parsing of stats into a separate
function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We run 'ovs-vsctl' nine times (first to find if interface is
there and then eight times = for each stats member separately).
This is very inefficient. I've found a way to run it once and
with a bit of help from virJSON module we can parse out stats
we need.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On Debian derived distros "localhost" can resolve to the normal
"127.0.0.1" and "::1", but it can also resolve to "127.0.1.1"
Rewrite the code so that it doesn't assume a fixed number of IPs.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Typo meant we use 'nodedev' instead of 'interface'. This doesn't hurt
libvirtd because if a process tries to acquire a lock it already holds
it will succeed. It fails when nodedev & interface drivers are in
separate daemons though.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When the drivers acquire their pidfile lock we don't want to wait if the
lock is already held. We need the driver to immediately report error,
causing the daemon to exit.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
