Add a test case for the TPM XML encryption parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Extend the TPM device XML parser and XML generator with emulator
state encryption support.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add an already existing test case tpm-emulator-tpm2 to qemuxml2xmltest.c
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for usage type vTPM to secret.
Extend the schema for the Secret to support the vTPM usage type
and add a test case for parsing the Secret with usage type vTPM.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The README contains a reference to GPL 2.1, which does not exist.
COPYING contains 2.0 so change the README to follow.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When using the ENUM macros, the compiler guards that the declaration
and implementation are in sync.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
We don't need domain_conf or libvirt-{qemu,lxc} in these generic files.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
qemuBlockJobRewriteConfigDiskSource rewrites the disk source only
according to the 'target'. This means that if someone would change the
inactive config of the VM to refer to a different disk a block job would
rewrite it when finishing a job which modifies the disk source.
Make sure that this does not happen by verifying that the source of the
config disk is the same.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Since we copy everything from the original storage source including some
runtime data which are not relevant for the config we should clear them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Both active block commit and block copy modify the disk source of the
active definition and thus also must modify the corresponding inactive
definition source so that the VM starts up later. This is currently
implemented in the legacy block job handler but the logic will be useful
also for the new handlers. Split it out which also simplifies it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
The <mirror> subelement is used in two ways: in a commit job to point to
existing storage, and in a block-copy job to point to additional
storage. We need a way to track only the distinct storage.
This patch introduces qemuBlockJobDiskRegisterMirror which registers the
mirror chain separately only for jobs which require it. This also comes
with remembering that in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Add 4 disks to the blockjob-blockdev-in.xml test case to allow adding
data for block pull, block copy, block commit, and active block commit
jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Commit c412383796 used a value from wrong enum when setting the disk's
mirrorState variable. This meant that a 'READY' job would show up as
'PIVOTING'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
When returning to asynchronous block job handling the flag which
determines the handling method should be reset prior to flushing
outstanding events. If there's an event to process the handler may
invoke the monitor and another event may be received. We'd not process
that one. Reset the flag earlier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainSnapshotDiskDataCollect copies the source of the disk from the
live config into the inactive config. Move this operation earlier so
that if we initialize it for use for the particular instance the
run-time-only data is not copied.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In case when the backing store can be represented with something
simpler such as a URI we can use it rather than falling back to the
json: pseudo-protocol.
In cases when it's not worth it (e.g. with the old ugly NBD or RBD
strings) let's switch to json.
The function is exported as we'll need it when overwriting the ugly
strings qemu would come up with during blockjobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The block commit API checked 'disk->src->path' to see whether there
is a reasonable disk source to be committed. As the top image can be
e.g. backed by NBD the check is not good enough. Replace it by
virStorageSourceIsEmpty.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For the modern use cases we are going to use 'blockdev-snapshot' instead
of 'blockdev-snapshot-sync'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuBuildStorageSourceChainAttachPrepareBlockdev prepares the full
backing chain for attachment via blockdev. For snapshots we'll need to
prepare one image only as it needs to be plugged on top of the existing
chain.
This patch introduces qemuBuildStorageSourceChainAttachPrepareBlockdevTop
which prepares only @top similarly to the original function by splitting
out the functionality into an internal function so that the API does not
change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 042c95bd19 qemuBuildStorageSourceChainAttachPrepareBlockdev
was added but the comment for the function mentions
qemuBuildStorageSourceChainAttachPrepareDrive. Fix the mistake.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we track the job separately we watch only for the abort of the
one single block job so the comment is no longer accurate. Also
describing asynchronous operation is not really necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With -blockdev:
- we track the job and check it after restart
- have the ability to ask qemu to persist it to collect result
- have the ability to report errors.
This solves all points the comment outlined so remove it. Also all jobs
handle the disk state modification along with the event so there's
nothing special the comment says.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use job-complete/job-abort instead of the blockjob-* variants for
blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As the error message is now available and we know whether the job failed
we can report an error straight away rather than having the user check
the event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Set the correct job states after the operation is requested in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When initiating a pivot or abort of a block job we need to track which
one was initiated. Currently it was done via data stashed in
virDomainDiskDef. Add possibility to track this also together with the
job itself.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Do decisions based on the configuration of the job rather than the data
stored with the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the stored job name rather than passing in the disk alias when
referring to the job which allows the same code to work also when
-blockdev will be used.
Note that this API does not require the change to use 'query-job' as it
will ever only work with blockjobs bound to disks due to the arguments
which allow only referring to a disk. For the disk-less jobs we'll need
to add a separate API later.
The change to qemuMonitorGetBlockJobInfo is required as the API was
stripping the 'drive-' prefix when returning the data which is not
desired any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cgroups v2 when a new group is created by default no controller is
enabled so the detection code will not detect any controllers.
When enabling the controllers we should also store them for the group.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
When creating new group for cgroups v2 the we cannot check
cgroups.controllers for that cgroup because the directory is created
later. In that case we should check cgroups.subtree_control of parent
group to get list of controllers enabled for child cgroups.
In order to achieve that we will prefer the parent group if it exists,
the current group will be used only for root group.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The virsh-optparse test broke after commit 6ac402c456 because it
always assumed the max memory limit can be adjusted on a running domain
which used to be the case in the old code.
This is only a hot fix for the CI build. The proper fix here is to
re-write the whole test in a self-test/unit-test manner where we only
test virsh's ability to parse various values, not running actual
commands.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
When commit 6ac402c456 added the API whenever VIR_DOMAIN_MEM_MAXIMUM
was passed the code always checked whether the domain was active and
therefore failed with an error even though only a config change was
requested. Fix the issue by replacing virDomainObjGetOneDef with
virDomainObjGetOneDefState which tells us what definition we're
performing the change on.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Commit d5572f62e3 forgot to add maxthreads to the non-Linux definition
of the function, thus breaking the MinGW build.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Changes noticed while copying to similar aspects of checkpoints.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Any message that is easy to trigger (as evidenced by the testsuite
update) should not use 'internal error' as its category.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virDomainSnapshotFindByName(list, NULL) should return NULL, rather
than the internal-use-only metaroot. Most existing callers pass in a
non-NULL name; the few external callers that don't are immediately
calling virDomainMomentSetParent (which indeed needs the metaroot
rather than NULL if the parent name is NULL); but as the leaky
abstraction is ugly, it is worth instead making
virDomainMomentSetParent static and adding a new function for
resolving the parent link of a brand new moment within its list. The
existing external uses of virDomainMomentSetParent always succeed
(either the new moment has parent_name of NULL to become a new root,
or has parent_name set to a strdup of the previous current moment);
hence, our new function does not need a return value (but it still has
a VIR_WARN in case future uses break our assumptions about failure
being impossible).
Missed when commit 02c4e24d refactored things to attempt to remove
direct metaroot manipulations out of the qemu and test drivers into
internal-only details, and made more obvious when commit dc8d3dc6
factored it out into a separate file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some VM configurations may result in a large number of threads created by
the associated qemu process which can exceed the system default limit. The
maximum number of threads allowed per process is controlled by the pids
cgroup controller and is set to 16k when creating VMs with systemd's
machined service. The maximum number of threads per process is recorded
in the pids.max file under the machine's pids controller cgroup hierarchy,
e.g.
$cgrp-mnt/pids/machine.slice/machine-qemu\\x2d1\\x2dtest.scope/pids.max
Maximum threads per process is controlled with the TasksMax property of
the systemd scope for the machine. This patch adds an option to qemu.conf
which can be used to override the maximum number of threads allowed per
qemu process. If the value of option is greater than zero, it will be set
in the TasksMax property of the machine's scope after creating the machine.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Update the current or max memory, on the persistent or live definition
depending on the flags which are currently ignored.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Make the test driver only support the VIR_TYPED_PARAM_STRING flag for
now.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If the dup2 fails, then we aren't going to get the correct result.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Avoid the chance that sysconf(_SC_OPEN_MAX) returns -1 and thus
would cause virBitmapNew would attempt to allocate a very large
bitmap.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
