Use the relative lookup specifier rather than the global one. Otherwise
only the first name would be looked up. Add a test case to cover the
scenario.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1436574
The native gluster pool source list data differs from the data used for
attaching gluster volumes as netfs pools. Currently the only difference
was the format. Since native pools don't use it and later there will be
more differences add a more deterministic way to switch between the
types instead.
Similar to commit b202c39 ignore the warning that breaks the build
with clang:
util/virnetlink.c:365:52: error: cast from 'char *' to 'struct nlmsghdr *'
increases required alignment from 1 to 4 [-Werror,-Wcast-align]
for (msg = resp; NLMSG_OK(msg, len); msg = NLMSG_NEXT(msg, len)) {
^~~~~~~~~~~~~~~~~~~~
/usr/include/linux/netlink.h:87:7: note: expanded from macro 'NLMSG_NEXT'
(struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buggy condition meant that vcpu0 would not be iterated in the checks.
Since it's not hotpluggable anyways we would not be able to break the
configuration of a live VM.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1437013
Like all devices, add the 'id' option for mdevs as well. Patch also
adjusts the test accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1438431
Signed-off-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1371892
The 'capacity' value (e.g. guest logical size) for a LUKS volume is
smaller than the 'physical' value of the file in the file system, so
we need to account for that.
When peeking at the encryption information about the volume add a fetch
of the payload_offset which is described as the offset to the start of
the volume data (in 512 byte sectors) in QEMU's QCryptoBlockLUKSHeader.
Then adjust the ->capacity appropriately when we determine that the
volume target encryption has a payload_offset value.
Add check for more than one RTA_OIF, even though this is rather
unlikely.
Get rid of the buggy switch / break as this code won't need to
handle more attributes.
Use VIR_WARNINGS_NO_CAST_ALIGN to fix impossible to fix
util/virnetdevip.c:560:17: error: cast increases required alignment of target type [-Werror=cast-align]
Depending on the architecture, requirements for ACPI and UEFI can
be different; more specifically, while on x86 UEFI requires ACPI,
on aarch64 it's the other way around.
Enforce these requirements when validating the domain, and make
the error message more accurate by mentioning that they're not
necessarily applicable to all architectures.
Several aarch64 test cases had to be tweaked because they would
have failed the validation step otherwise.
Now that the NO_ACPI and NO_HPET capabilities are set
automatically by virQEMUCapsInitQMPBasicArch() if
appropriate for the architecture, they shouldn't be
used manually to avoid masking bugs.
The capabilities used in test cases should match those used
during normal operation for the tests to make any sense.
This results in the generated command line for a few test
cases (most notably non-x86 test cases that were wrongly
assuming they could use -no-acpi) changing.
Instead of having a single function that probes the
architecture from the monitor and then sets a bunch of
basic capabilities based on it, have a separate function
for each part: virQEMUCapsInitQMPArch() only sets the
architecture, and virQEMUCapsInitQMPBasicArch() only sets
the capabilities.
This split will be useful later on, when we will want to
set basic capabilities from the test suite without having
to go through the pain of mocking the monitor.
Creating dummy <change> elements was a workaround for the
HTML DTD not allowing empty <ul> elements, but we can do
better by tweaking the the XSLT stylesheet.
Now that the source file is validated against a schema that
only allows the <code> HTML tag to be used, we can rely on
that assumption to simplify our XSLT stylesheet.
If a transient storage pool is deemed inactive after libvirtd restart it
would not be deleted from the list. Reuse virStoragePoolUpdateInactive
along with a refactor necessary to properly update the state.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1242801
After a pool is made inactive the definition objects need to be updated
(if a new definition is prepared) and transient pools need to be
completely removed. Split out the code doing these steps into a separate
function for later reuse.
When registering a storage poll backend, the code would use
virStorageTypeToString instead of virStoragePoolTypeToString. The
following message would be logged:
virDriverLoadModuleFunc:71 : Lookup function 'virStorageBackendSCSIRegister'
virStorageBackendRegister:174 : Registering storage backend '(null)'
Sometimes it may be desired to validate individual files against a
schema. Refactor the data structures to unify them and introduce a new
macro DO_TEST_FILE(schema, xmlfile) which will test the XML file against
the given schema file.
Currently, if we want to zero out disk source (e,g, due to
startupPolicy when starting up a domain) we use
virDomainDiskSetSource(disk, NULL). This works well for file
based storage (storage type file, dir, or block). But it doesn't
work at all for other types like volume and network.
So imagine that you have a domain that has a CDROM configured
which source is a volume from an inactive pool. Because it is
startupPolicy='optional', the CDROM is empty when the domain
starts. However, the source element is not cleared out in the
status XML and thus when the daemon restarts and tries to
reconnect to the domain it refreshes the disks (which fails - the
storage pool is still not running) and thus the domain is killed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virMacMap module is there for dumping [domain, <list of is
MACs>] pairs into a file so that libvirt_guest NSS module can use
it. Whenever a interface is allocated from network (e.g. on
domain<F2> startup or NIC hotplug), network is notified and so is
virMacMap module subsequently. The module update functions
networkMacMgrAdd() and networkMacMgrDel() gracefully handle the
case when there's no module. The problem is, the module is
created if and only if network is freshly started, or if the
daemon restarts and network previously had the module.
This is not very user friendly - if users want to use the NSS
module they need to destroy their network and bring it up again
(and subsequently all the domains using it).
One disadvantage of this approach implemented here is that one
may get just partial results: any already running network does
not record mac maps, thus only newly plugged domains will be
stored in the module. The network restart scenario is not touched
by this of course. But one can argue that older libvirts had
never recorded the mac maps anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far our code is full of the following pattern:
dom = virGetDomain(conn, name, uuid)
if (dom)
dom->id = 42;
There is no reasong why it couldn't be just:
dom = virGetDomain(conn, name, uuid, id);
After all, client domain representation consists of tuple (name,
uuid, id).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There was an unhandled 'open' call which resulted in:
"error: Library function returned error but did not set virError"
Even if this happens during the daemon's start when we still don't have
any set of outputs defined yet, we can safely report an error, since we
automatically fallback to stderr which is fine even for both
running as a daemonized process, since this happens before the daemon
forks into the background, and running as a systemd service, since
systemd re-directs std outputs to journald by default.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1436060
Signed-off-by: Erik Skultety <eskultet@redhat.com>
After the release it's necessary to add a new <release> section for the
upcoming release. Add a template so that it does not have to be
compiled over and over again.
In 9e2465834 a check that denies internal snapshots when pflash
based loader is configured for the domain. However, if there's
none and an user tries to do an internal snapshot they will
witness daemon crash as in that case vm->def->os.loader is NULL
and we dereference it unconditionally.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
CPU features which change their value from disabled to enabled between
two calls to query-cpu-model-expansion (the first with no extra
properties set and the second with 'migratable' property set to false)
can be marked as enabled and non-migratable in qemuMonitorCPUModelInfo.
Since the code consuming qemuMonitorCPUModelInfo currently ignores the
migratable flag, this change is effectively changing the CPU model
advertised in domain capabilities to contain all features (even those
which block migration). And this matches what we do for QEMU older than
2.9.0, when we detect all CPUID bits ourselves without asking QEMU.
As a result of this change
<cpu mode='host-model'>
<feature name='invtsc' policy='require'/>
</cpu>
will work with all QEMU versions. Such CPU definition would be forbidden
with QEMU >= 2.9.0 without this patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If calling query-cpu-model-expansion on the 'host'/'max' CPU model with
'migratable' property set to false succeeds, we know QEMU is able to
tell us which features would disable migration. Thus we can mark all
enabled features as migratable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU is able to tell us whether a CPU feature would block migration or
not. This patch adds support for storing such features in
qemuMonitorCPUModelInfo.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When idx is 0 virStorageFileChainLookup returns the base (bottom) of the
backing chain rather than the top. This is expected by the callers of
qemuDomainGetStorageSourceByDevstr.
Add a special case for idx == 0
Pool types that have the VIR_STORAGE_POOL_SOURCE_NAME flag set
allow omitting the <name> element and instead fill out the pool name
from the <source><name> element.
Relax the schema to make <name> optional for these pools.
Expressing that at least one of these is required is out of scope
of the schema.
