This fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=979290https://bugzilla.redhat.com/show_bug.cgi?id=979330
The node device driver was written with the assumption that udev would
use a "change" event to notify libvirt of any change to device status
(including the name of the driver it was bound to). It turns out this
is not the case (see Comment 4 of BZ 979290). That means that a
dumpxml for a device would always show whatever driver happened to be
bound at the time libvirt was started (when the node device cache was
built).
There was already code in the driver (for the benefit of the HAL
backend) that updated the driver name from sysfs each time a device's
info was retrieved from the cache. This patch just enables that manual
update for the udev backend as well.
Historically security issues in libvirt have been primarily
triaged & fixed by the Red Hat libvirt members & Red Hat
security team, who then usually notify other vendors via
appropriate channels. There have been a number of times
when vendors have not been properly notified ahead of
announcement. It has also disadvantaged community members
who have to backport fixes to releases for which there are
no current libvirt stable branches.
To address this, we want to make the libvirt security process
entirely community focused / driven. To this end I have setup
a new email address "libvirt-security@redhat.com" for end
users to report bugs which have (possible) security implications.
This email addr is backed by an invitation only, private
archive, mailing list. The intent is for the list membership
to comprise a subset of the libvirt core team, along with any
vendor security team engineers who wish to participate in a
responsible disclosure process for libvirt. Members of the
list will be responsible for analysing the problem to determine
if a security issue exists and then issue fixes for all current
official stable branches & git master.
I am proposing the following libvirt core team people as
members of the security team / list (all cc'd):
Daniel Berrange (Red Hat)
Eric Blake (Red Hat)
Jiri Denemar (Red Hat)
Daniel Veillard (Red Hat)
Jim Fehlig (SUSE)
Doug Goldstein (Gentoo)
Guido Günther (Debian)
We don't have anyone from Ubuntu on the libvirt core team.
Serge Hallyn is the most frequent submitter of patches from
Ubuntu in recent history, so I'd like to invite him to join.
Alternatively, Serge, feel free to suggest someone else to
represent Ubuntu's interests.
If any other vendors/distros have security people who are
responsible for dealing with libvirt security issues, and
want to join to get early disclosure of issues, they can
suggest people. Existing security team members will vet /
approve such requests to ensure they are genuine.
Anyone on the team / list will be **required** to honour any
embargo period agreed between members for non-public issues
that are reported. The aim will be to have a maximum 2 week
embargo period in the common case, extendable to 1 month if
there is sufficient justification made. If anyone feels they
are unable to follow such an embargo process for whatever
reason, please decline membership of the security list/team.
The patch which follows puts up some docs on the website
about all of this....
Document how to report security bugs and the process that
will be used for addressing them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When using 'rpmbuild --define "_without_xen 1"', but on a new enough
Fedora where %{with_libxl} still gets set to 1 by default, the
build dependencies were incomplete, which could result in 'make rpm'
failing because ./configure failed to build the libxl driver.
* libvirt.spec.in (BuildRequires): Fix xen-devel condition.
Signed-off-by: Eric Blake <eblake@redhat.com>
There were two errors, one as a direct result of commit id '8807b285'
and the other from cut-n-paste
TEST: nodedevxml2xmltest
.............. 14 OK
==25735== 3 bytes in 1 blocks are definitely lost in loss record 1 of 24
==25735== at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==25735== by 0x344D2AF275: xmlStrndup (in /usr/lib64/libxml2.so.2.9.1)
==25735== by 0x4D0C767: virNodeDeviceDefParseNode (node_device_conf.c:997)
==25735== by 0x4D0D3D2: virNodeDeviceDefParse (node_device_conf.c:1337)
==25735== by 0x401CA4: testCompareXMLToXMLHelper (nodedevxml2xmltest.c:28)
==25735== by 0x402B2F: virtTestRun (testutils.c:158)
==25735== by 0x401B27: mymain (nodedevxml2xmltest.c:81)
==25735== by 0x40316A: virtTestMain (testutils.c:722)
==25735== by 0x37C1021A04: (below main) (libc-start.c:225)
==25735==
==25735== 16 bytes in 1 blocks are definitely lost in loss record 10 of 24
==25735== at 0x4A08A6E: realloc (vg_replace_malloc.c:662)
==25735== by 0x4C7385E: virReallocN (viralloc.c:184)
==25735== by 0x4C73906: virExpandN (viralloc.c:214)
==25735== by 0x4C73B4A: virInsertElementsN (viralloc.c:324)
==25735== by 0x4D0C84C: virNodeDeviceDefParseNode (node_device_conf.c:1026)
==25735== by 0x4D0D3D2: virNodeDeviceDefParse (node_device_conf.c:1337)
==25735== by 0x401CA4: testCompareXMLToXMLHelper (nodedevxml2xmltest.c:28)
==25735== by 0x402B2F: virtTestRun (testutils.c:158)
==25735== by 0x401B27: mymain (nodedevxml2xmltest.c:81)
==25735== by 0x40316A: virtTestMain (testutils.c:722)
==25735== by 0x37C1021A04: (below main) (libc-start.c:225)
==25735==
PASS: nodedevxml2xmltest
The first error was resolved by adding a missing VIR_FREE(numberStr); in
the new function virNodeDevCapPciDevIommuGroupParseXML().
The second error was a bit more opaque as the error was a result of copying
the free methodolgy of the existing code in virNodeDevCapsDefFree(). The code
would free each of the entries in the array, but not the memory for the
array itself. Added the necessary VIR_FREE(data->pci_dev.iommuGroupDevices)
and while at it added the missing VIR_FREE(data->pci_dev.virtual_functions)
although there wasn't a test that tripped across it (thus it's been lurking
since commit id 'a010165d').
Commit id 'ed3bac71' introduced the following:
TEST: libvirtdconftest
........................................ 40 OK
==25875== 690 (480 direct, 210 indirect) bytes in 30 blocks are definitely lost in loss record 18 of 24
==25875== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==25875== by 0x4C737DF: virAllocN (viralloc.c:152)
==25875== by 0x403BC8: remoteConfigGetStringList (libvirtd-config.c:74)
==25875== by 0x4042CF: daemonConfigLoadOptions (libvirtd-config.c:382)
==25875== by 0x4052F5: daemonConfigLoadData (libvirtd-config.c:479)
==25875== by 0x40222C: testCorrupt (libvirtdconftest.c:112)
==25875== by 0x40321F: virtTestRun (testutils.c:158)
==25875== by 0x401FEE: mymain (libvirtdconftest.c:228)
==25875== by 0x40385A: virtTestMain (testutils.c:722)
==25875== by 0x37C1021A04: (below main) (libc-start.c:225)
==25875==
PASS: libvirtdconftest
Commit id '53d5967c' introduced the following:
TEST: storagevolxml2argvtest
.............. 14 OK
==25636== 358 (264 direct, 94 indirect) bytes in 1 blocks are definitely lost in loss record 67 of 75
==25636== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==25636== by 0x4C95791: virAlloc (viralloc.c:124)
==25636== by 0x4CA0BB4: virCommandNewArgs (vircommand.c:805)
==25636== by 0x4CA0C88: virCommandNew (vircommand.c:789)
==25636== by 0x408602: virStorageBackendCreateQemuImgCmd (storage_backend.c:849)
==25636== by 0x405427: testCompareXMLToArgvHelper (storagevolxml2argvtest.c:61)
==25636== by 0x4064DF: virtTestRun (testutils.c:158)
==25636== by 0x40516F: mymain (storagevolxml2argvtest.c:195)
==25636== by 0x406B1A: virtTestMain (testutils.c:722)
==25636== by 0x37C1021A04: (below main) (libc-start.c:225)
==25636==
PASS: storagevolxml2argvtest
Commit '861d4056' introduced the following:
TEST: networkxml2xmltest
.................. 18 OK
==25504== 7 bytes in 1 blocks are definitely lost in loss record 5 of 23
==25504== at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==25504== by 0x37C1085D71: strdup (strdup.c:42)
==25504== by 0x4CB835F: virStrdup (virstring.c:546)
==25504== by 0x4CC5179: virXPathString (virxml.c:90)
==25504== by 0x4CC75C2: virNetDevVlanParse (netdev_vlan_conf.c:78)
==25504== by 0x4CF928A: virNetworkPortGroupParseXML (network_conf.c:1555)
==25504== by 0x4CFE385: virNetworkDefParseXML (network_conf.c:2049)
==25504== by 0x4D0113B: virNetworkDefParseNode (network_conf.c:2273)
==25504== by 0x4D01254: virNetworkDefParse (network_conf.c:2234)
==25504== by 0x401E80: testCompareXMLToXMLHelper (networkxml2xmltest.c:32)
==25504== by 0x402D4F: virtTestRun (testutils.c:158)
==25504== by 0x401CE9: mymain (networkxml2xmltest.c:110)
==25504==
PASS: networkxml2xmltest
Also changed the label from error to cleanup and adjusted code since it's
all one exit path
aae0fc2a92 removed the #elementsUSB anchor
but did not update the links to point to the new section #elementsHostDev.
Signed-off-by: Philipp Hahn <hahn@univention.de>
The IF_MAXUNIT macro is not present on all BSDs, so
make its use conditional, to avoid breaking OS-X.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'in_addr_t' typedef is not present in Mingw64 headers.
Instead we can use the more portable 'struct in_addr' and
then access its 's_addr' field.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The udev based interface backend did not allow querying data over a
read-only connection which is different than how the netcf backend
operates. This brings the behavior inline with the default, netcf
backend.
When creating a virtual FC HBA with virsh/libvirt API, an error message
will be returned: "error: Node device not found",
also the 'nodedev-dumpxml' shows wrong information of wwpn & wwnn
for the new created device.
Signed-off-by: xschen@tnsoft.com.cn
This reverts f90af69 which switched wwpn & wwwn in the wrong place.
https://www.kernel.org/doc/Documentation/scsi/scsi_fc_transport.txt
Building on FreeBSD had this linker error:
/work/a/ports/devel/libvirt/work/libvirt-1.1.0/src/.libs/libvirt.so:
undefined reference to `virPCIDeviceAddressParse'
This was caused by the new use of virPCIDeviceAddressParse in a
portion of virpci.c that wasn't linux-only (in commit 72c029d8). The
problem was that virPCIDeviceAddressParse had originally been defined
inside #ifdef _linux (because it was only used by another function
that was inside the same ifdef).
The solution is to move it out to the part of virpci.c that is
compiled on all platforms.
(Because the portion that was "moved" was 40-50 lines, but only moved
up by 15 lines, the diff for the patch is less than non-informative -
rather than showing that part that I moved, it shows the bit that was
previously before the moved part, and now sits *after* it.)
Implicit controllers may be dependent on device definitions altered
in a post-parse callback. Specifically, if a console device is
defined without the target type, the type will be set in QEMU's
callback. In the case of s390, this is virtio, which requires
an implicit virtio-serial controller.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
For s390 the default console target type is virtio. This also requires
that an implicit virtio-serial controller is instantiated.
This testcase verifies that the target type of virtio is correctly set
in the generated XML if no target element was given and that the
corresponding virtio-serial element is generated too.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
If networkUnplugBandwidth is called on a network which has
no bandwidth defined, print a warning instead of crashing.
This can happen when destroying a domain with bandwidth if
bandwidth was removed from the network after the domain was
started.
https://bugzilla.redhat.com/show_bug.cgi?id=975359
This includes adding it to the nodedev parser and formatter, docs, and
test.
An example of the new iommuGroup element that is a part of the output
from "virsh nodedev-dumpxml" (virNodeDeviceGetXMLDesc()):
<device>
<name>pci_0000_02_00_1</name>
<capability type='pci'>
...
<iommuGroup number='12'>
<address domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
<address domain='0x0000' bus='0x02' slot='0x00' function='0x1'/>
</iommuGroup>
</capability>
</device>
Any device which belongs to an "IOMMU group" (used by vfio) will
have links to all devices of its group listed in
/sys/bus/pci/$device/iommu_group/devices;
/sys/bus/pci/$device/iommu_group is actually a link to
/sys/kernel/iommu_groups/$n, where $n is the group number (there
will be a corresponding device node at /dev/vfio/$n once the
devices are bound to the vfio-pci driver)
The following functions are added:
virPCIDeviceGetIOMMUGroupList
Gets a virPCIDeviceList with one virPCIDeviceList for each device
in the same IOMMU group as the provided virPCIDevice (a copy of the
original device object is included in the list.
virPCIDeviceAddressIOMMUGroupIterate
Calls the function @actor once for each device in the group that
contains the given virPCIDeviceAddress.
virPCIDeviceAddressGetIOMMUGroupAddresses
Fills in a virPCIDeviceAddressPtr * with an array of
virPCIDeviceAddress, one for each device in the iommu group of the
provided virPCIDeviceAddress (including a copy of the original).
virPCIDeviceAddressGetIOMMUGroupNum
Returns the group number as an int (a valid group number will always
be 0 or greater). If there is no iommu_group link in the device's
directory (usually indicating that vfio isn't loaded), -2 will be
returned. On any real error, -1 will be returned.
We only break out of the while loop if *content is an empty string.
However the buffer has been allocated to BUFSIZ + 1 (8193 in my case),
but it gets overwritten in the next for iteration.
Move VIR_FREE right before we overwrite it to avoid the leak.
==5777== 16,386 bytes in 2 blocks are definitely lost in loss record 1,022 of 1,027
==5777== by 0x5296E28: virReallocN (viralloc.c:184)
==5777== by 0x52B0C66: virFileReadLimFD (virfile.c:1137)
==5777== by 0x52B0E1A: virFileReadAll (virfile.c:1199)
==5777== by 0x529B092: virCgroupGetValueStr (vircgroup.c:534)
==5777== by 0x529AF64: virCgroupMoveTask (vircgroup.c:1079)
Introduced by 83e4c77.
https://bugzilla.redhat.com/show_bug.cgi?id=978352
Don't check for '\n' at the end of file if zero bytes were read.
Found by valgrind:
==404== Invalid read of size 1
==404== at 0x529B09F: virCgroupGetValueStr (vircgroup.c:540)
==404== by 0x529AF64: virCgroupMoveTask (vircgroup.c:1079)
==404== by 0x1EB475: qemuSetupCgroupForEmulator (qemu_cgroup.c:1061)
==404== by 0x1D9489: qemuProcessStart (qemu_process.c:3801)
==404== by 0x18557E: qemuDomainObjStart (qemu_driver.c:5787)
==404== by 0x190FA4: qemuDomainCreateWithFlags (qemu_driver.c:5839)
Introduced by 0d0b409.
https://bugzilla.redhat.com/show_bug.cgi?id=978356
Although SRIOV network cards support setting a vlan tag on their
virtual functions, and although setting this vlan tag via a <vlan>
element in a domain's <interface> works, setting a vlan tag for these
devices in a <network> definition, or in a network <portgroup>
definition is also supposed to work (and the comment that validates
<vlan> usage even says that!). However, the check to allow it only
checked for an openvswitch network, so attempts to add <vlan> to a
network of type='hostdev' would fail.
Somehow I put an example of a domain interface with a <vlan> element
into the network documentation.
This patch replaces that with an example of a network definition that
has a vlan element with trunk='yes', multiple tags, and even the new
nativeMode attribute. It also includes a <portgroup> that has a vlan
defined.
commit 0fc12bca added a new test called qemuhotplugtest which has
several data files in tests/qemuhotplugtestdata, but didn't add that
directory to EXTRA_DIST in the tests Makefile.am, so the make check
done during a make rpm was failing due to missing data files.
A loop in qemuPrepareHostdevPCIDevices() intended to cycle through all
the objects on the list pcidevs was doing "while (listcount > 0)", but
nothing in the body of the loop was reducing the size of the list - it
was instead removing items from a *different* list. It has now been
safely changed to a for() loop.
(This isn't as bad as it sounds - it's only a problem in case of an
OOM error.)
qemuGetActivePciHostDeviceList() had been creating a list that
contained pointers to objects that were also on the activePciHostdevs
list. In case of an OOM error, this newly created list would be
virObjectUnref'ed, which would cause everything on the list to be
freed. But all of those objects would still be on the
activePciHostdevs list, which could have very bad consequences if that
list was ever again accessed.
The solution used here is to populate the new list with *copies* of
the objects from the original list. It turns out that on return from
qemuGetActivePciHostDeviceList(), the caller would almost immediately
go through all the device objects and "steal" them (i.e. remove the
pointer from the list but not delete it) all from either one list or
the other; we now instead just *delete* (remove from the list and
free) each device from one list or the other, so in the end we have
the same state.
The "fix" I pushed a few commits ago would still leak a virPCIDevice
in case of an OOM error. Although it's inconsequential in practice,
this patch satisfies my OCD.
The same strings were being re-created multiple times just to save
declaring a new variable. In the meantime, the use of the generic
variable names led to confusion when trying to follow the code. This
patch creates strings for:
stubDriverName (was called "driver" in original args)
stubDriverPath ("/sys/bus/pci/drivers/${stubDriverName}")
driverLink ("${device}/driver")
oldDriverName (the final component of path linked to by
"${device}/driver")
oldDriverPath ("/sys/bus/pci/drivers/${oldDriverName}")
then re-uses them as necessary.
I realized after the fact that it's probably better in the long run to
give this function a name that matches the name of the link used in
sysfs to hold the group (iommu_group).
I'm changing it now because I'm about to add several more functions
that deal with iommu groups.
The driver arg to virPCIDeviceDetach is no longer used (the name of the stub driver is now set in the virPCIDevice object, and virPCIDeviceDetach retrieves it from there). Remove it.
Commit 861d40565 added code (my personal change to "clean up" the
submitter's code, *not* the fault of the submitter) that dereferenced
virtVlan without first checking for NULL. This patch fixes that and,
as part of the fix, cleans up some unnecessary obtuseness.
As my punishment for the break in 7f15ebc7 (fixed in 752596b5dd) I'm
introducing this test to make sure it won't happen again. Currently,
only test for <graphics/> is supported.
Free the old XML strings before overwriting them if the user
has chosen to reedit the file or force the redefinition.
Found by Alex Jia trying to reproduce another bug:
https://bugzilla.redhat.com/show_bug.cgi?id=977430#c3
virNetDevBridgeSetSTPDelay accepts delay in milliseconds,
but BSD implementation was expecting seconds. Therefore,
it was working correctly only with delay == 0.
This patch adds functionality to allow libvirt to configure the
'native-tagged' and 'native-untagged' modes on openvswitch networks.
Signed-off-by: Laine Stump <laine@redhat.com>
I just learned that VFIO resets PCI devices when they are assigned to
guests / returned to the host, so it is redundant for libvirt to reset
the devices. This patch inhibits calling virPCIDeviceReset to devices
that will be/were assigned using VFIO.
