The patch that added the nftables backend for virtual networks left
iptables as the default backend when both nftables and iptables are
installed.
The only functional difference between the two backends is that the
nftables backend doesn't add any rules to fix up the checksum of DHCP
packets, which will cause failures on guests with very old OSes
(e.g. RHEL5) that have a virtio-net network interface using vhost
packet processing (the default), connected to a libvirt virtual
network, and configured to acquire the interface IP using DHCP. Since
RHEL5 has been out of support for several years already, we might as
well start off nftables support right by making it the default.
Distros that aren't quite ready to default to nftables (e.g. maybe
they're rebasing libvirt within a release and don't want to surprise
anyone with an automatic switch from iptables to nftables) can simply
run meson with "-Dfirewall_backend=iptables" during their official
package build.
In the extremely unlikely case that this causes a problem for a user,
they can work around the failure by adding "<driver name='qemu'/> to
the guest <interface> element.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Run all the networkxml2firewall tests twice - once with iptables
backend, and once with the nftables backend.
The results files for the existing iptables tests were previously
named *.args. That has been changed to *.iptables, and the results
files for the new nftables tests are named *.nftables.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Support using nftables to setup the firewall for each virtual network,
rather than iptables. The initial implementation of the nftables
backend creates (almost) exactly the same ruleset as the iptables
backend, determined by running the following commands on a host that
has an active virtual network:
iptables-save >iptables.txt
iptables-restore-translate -f iptables.txt
(and the similar ip6tables-save/ip6tables-restore-translate for an
IPv6 network). Correctness of the new backend was checked by comparing
the output of:
nft list ruleset
when the backend is set to iptables and when it is set to nftables.
This page was used as a guide:
https://wiki.nftables.org/wiki-nftables/index.php/Moving_from_iptables_to_nftables
The only differences between the rules created by the nftables backed
vs. the iptables backend (aside from a few inconsequential changes in
display order of some chains/options) are:
1) When we add nftables rules, rather than adding them in the
system-created "filter" and "nat" tables, we add them in a private
table (ie only we should be using it) created by us called "libvirt"
(the system-created "filter" and "nat" tables can't be used because
adding any rules to those tables directly with nft will cause failure
of any legacy application attempting to use iptables when it tries to
list the iptables rules (e.g. "iptables -S").
(NB: in nftables only a single table is required for both nat and
filter rules - the chains for each are differentiated by specifying
different "hook" locations for the toplevel chain of each)
2) Since the rules that were added to allow tftp/dns/dhcp traffic from
the guests to the host are unnecessary in the context of nftables,
those rules aren't added.
(Longer explanation: In the case of iptables, all rules were in a
single table, and it was always assumed that there would be some
"catch-all" REJECT rule added by "someone else" in the case that a
packet didn't match any specific rules, so libvirt added these
specific rules to ensure that, no matter what other rules were added
by any other subsystem, the guests would still have functional
tftp/dns/dhcp. For nftables though, the rules added by each subsystem
are in a separate table, and in order for traffic to be accepted, it
must be accepted by *all* tables, so just adding the specific rules to
libvirt's table doesn't help anything (as the default for the libvirt
table is ACCEPT anyway) and it just isn't practical/possible for
libvirt to find *all* other tables and add rules in all of them to
make sure the traffic is accepted. libvirt does this for firewalld (it
creates a "libvirt" zone that allows tftp/dns/dhcp, and adds all
virtual network bridges to that zone), however, so in that case no
extra work is required of the sysadmin.)
3) nftables doesn't support the "checksum mangle" rule (or any
equivalent functionality) that we have historically added to our
iptables rules, so the nftables rules we add have nothing related to
checksum mangling.
(NB: The result of (3) is that if you a) have a very old guest (RHEL5
era or earlier) and b) that guest is using a virtio-net network
device, and c) the virtio-net device is using vhost packet processing
(the default) then DHCP on the guest will fail. You can work around
this by adding <driver name='qemu'/> to the <interface> XML for the
guest).
There are certainly much better nftables rulesets that could be used
instead of those implemented here, and everything is in place to make
future changes to the rules that are used simple and free of surprises
(e.g. the rules that are added have coresponding "removal" commands
added to the network status so that we will always remove exactly the
rules that were previously added rather than trying to remove the
rules that "the current build of libvirt would have added" (which will
be incorrect the first time we run a libvirt with a newly modified
ruleset). For this initial implementation though, I wanted the
nftables rules to be as identical to the iptables rules as possible,
just to make it easier to verify that everything is working.
The backend can be manually chosen using the firewall_backend setting
in /etc/libvirt/network.conf. libvirtd/virtnetworkd will read this
setting when it starts; if there is no explicit setting, it will check
for availability of FIREWALL_BACKEND_DEFAULT_1 and then
FIREWALL_BACKEND_DEFAULT_2 (which are set at build time in
meson_options.txt or by adding -Dfirewall_backend_default_n=blah to
the meson commandline), and use the first backend that is available
(ie, that has the necessary programs installed). The standard
meson_options.txt is set to check for nftables first, and then
iptables.
Although it should be very safe to change the default backend from
iptables to nftables, that change is left for a later patch, to show
how the change in default can be undone if someone really needs to do
that.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
This was the only reason we required the iptables and ebtables
packages at build time, and many other external commands already have
their binaries found at runtime by looking through $PATH (virCommand
automatically does this), so we may as well do it for these commands
as well.
Since we no longer need iptables or iptables at build time, we can
also drop the BuildRequires for them from the rpm specfile.
Inspired-by: 6aa2fa38b0
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In the case that a new version of libvirt is started that uses
different rules to build the network firewall, we need to re-save the
status so that when the network is destroyed (or the *next* time
libvirt is restarted and wants to remove/re-add the firewall), it will
have the proper information to perform the firewall removal.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When destroying a network, the network driver has always assumed that
it knew what firewall rules had been added as the network was
started. This was usually correct - I only recall one time in the past
that the firewall rules added by libvirt were changed. But if the
exact rules used for a network *were* ever changed from one
build/version of libvirt to another, then we would end up attempting
to remove rules that hadn't been added, and could possibly *not*
remove rules that had been added.
The solution to this to not make such brash assumptions about the
past, but instead to save (in the network status object at network
start time) a list of all the rules needed to remove the rules that
were added for the network, and then use that saved list during
network destroy to remove exactly what was previous added.
Beyond making net-destroy more precise, there are other benefits:
1) We can change the details of the rules we add for networks from one
build/release of libvirt to another and painlessly upgrade.
2) The user can switch from one firewall backend to another by simply
changing the setting in network.conf and restarting
libvirtd/virtnetworkd.
In both cases, the restarted libvirtd/virtnetworkd will remove all the
rules that had been previously added (based on the network status),
and then add new rules (saving the new removal commands back into the
network status)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This virFirewall object will store the list of actions required to
remove the firewall that was added for the currently active instance
of the network, so it has been named "fwRemoval" (and when parsed into
XML, the <firewall> element will have the name "fwRemoval").
There are no uses of the fwRemoval object in the virNetworkObj yet,
but everything is in place to add it to the XML when formatted, parse
it from the XML when reading network status, and free the virFirewall
object when the virNetworkObj is freed.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These functions convert a virFirewall object to/from XML so that it
can be serialized to disk (in a virNetworkObj's status file) and
restored later (e.g. after libvirtd/virtnetworkd is restarted).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virFirewallNewFromRollback() creates a new virFirewall object that
contains a copy of the "rollback" commands from an existing
virFirewall object, but in reverse order. The intent is that this
virFirewall be saved and used later to remove the firewall rules that
were added for a network.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will be used to label (via "name='blah'") a firewall when it is
formatted to XML and written to the network status.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
So far this will only affect what happens if there is some failure
while applying the firewall rules; the rollback rules aren't yet
persistent beyond that time. More work is needed to remember the
rollback rules while the network is active, and use those rules to
remove the firewall for the network when it is destroyed.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If the VIR_FIREWALL_TRANSACTION_AUTO_ROLLBACK flag is set, each time
an iptables command is executed that is adding a rule or chain, a
corresponding command that will *delete* the same rule/chain is
constructed and added to the list of rollback commands. If we later
want to undo the entire firewall, we can just run those commands.
This isn't yet used anywhere, since
VIR_FIREWALL_TRANSACTION_AUTO_ROLLBACK isn't being set.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In the past virFirewall required all rollback commands for a group
(those commands necessary to "undo" any rules that had been added in
that group in case of a later failure) to be manually added by
switching into the virFirewall object into "rollback mode" and then
re-calling the inverse of the exact virFirewallAddCmd*() APIs that had
been called to add the original rules (ie. for each
"iptables --insert" command, for rollback we would need to add a
command with all arguments identical except that "--insert" would be
replaced by "--delete").
Because nftables can't search for rules to remove by comparing all the
arguments (it instead expects *only* a handle that is provided via
stdout when the rule was originally added), we won't be able to follow
the iptables method and manually construct the command to undo any
given nft command by just duplicating all the args of the command
(except the action). Instead we will need to be able to automatically
create a rollback command at the time the rule-adding command is
executed (e.g. an "nft delete rule" command that would include the
rule handle returned in stdout by an "nft add rule" command).
In order to make this happen, we need to be able to 1) learn whether
the user of the virFirewall API desires this behavior (handled by a new
transaction flag called VIR_FIREWALL_TRANSACTION_AUTO_ROLLBACK that
can be retrieved with the new virFirewallTransactionGetFlags() API),
and 2) add a new command to the current group's rollback command list (with
the new virFirewallAddRollbackCmd()).
We will actually use this capability in an upcoming patch.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Modify networkSetupPrivateChains() in the network driver to accept a
firewallBackend argument so it will know which backend to call. (right
now it always calls the iptables version of the lower level function,
but in the future it could instead call the nftables version based on
configuration).
But networkSetupPrivateChains() was being called with virOnce(), and
virOnce() doesn't support calling functions that require an argument
(it's based on pthread_once(), which accepts no arguments, so it's not
something we can easily fix in our implementation of virOnce()). To
solve this dilemma, this patch eliminates use of virOnce() by adding a
static lock, and putting all of networkSetupPrivateChains() (including
the setting of "chainInitDone") inside a lock guard - now the places
that used to call it via virOnce() can safely call it directly
instead (adding in the necessary argument to specify backend).
(If it turns out to be significant, we could optimize this by checking
for chainInitDone outside the lock guard, returning immediately if
it's already set, and then moving the setting of chainInitDone up to
the top of the guarded section.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It still can have only one useful value ("iptables"), but once a 2nd
value is supported, it will be selectable by setting
"firewall_backend=nftables" in /etc/libvirt/network.conf.
If firewall_backend isn't set in network.conf, then libvirt will check
to see if FIREWALL_BACKEND_DEFAULT_1 is available and, if so, set
that. (Since FIREWALL_BACKEND_DEFAULT_1 is currently "iptables", this
means checking to see it the iptables binary is present on the
system). If the default backend isn't available, that is considered a
fatal error (since no networks can be started anyway), so an error is
logged and startup of the network driver fails.
NB: network.conf is itself created from network.conf.in at build time,
and the advertised default setting of firewall_backend (in a commented
out line) is set from the meson_options.txt setting
"firewall_backend_default_1". This way the conf file will have correct
information no matter what ordering is chosen for default backend at
build time (as more backends are added, settings will be added for
"firewall_backend_default_n", and those will be settable in
meson_options.txt and on the meson commandline to change the ordering
of the auto-detection when no backend is set in network.conf).
virNetworkLoadDriverConfig() may look more complicated than necessary,
but as additional backends are added, it will be easier to add checks
for those backends (and to re-order the checks based on builders'
preferences).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This file is generated from network.conf.in because it will soon have
an item that must be modified according to meson buildtime config.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(This paragraph is for historical reference only, described only to
avoid confusion of past use of the name with its new use) In a past
life, virFirewallBackend had been a private static in virfirewall.c
that was set at daemon init time, and used to globally (i.e. for all
drivers in the daemon) determine whether to directly execute iptables
commands, or to run them indirectly via the firewalld passthrough
API. This was removed in commit d566cc55, since we decided that using
the firewalld passthrough API is never appropriate.
Now the same enum, virFirewallBackend, is being reintroduced, with a
different meaning and usage pattern. It will be used to pick between
using nftables commands or iptables commands (in either case directly
handled by libvirt, *not* via firewalld). Additionally, rather than
being a static known only within virfirewall.c and applying to all
firewall commands for all drivers, each virFirewall object will have
its own backend setting, which will be set during virFirewallNew() by
the driver who wants to add a firewall rule.
This will allow the nwfilter and network drivers to each have their
own backend setting, even when they coexist in a single unified
daemon. At least as important as that, it will also allow an instance
of the network driver to remove iptables rules that had been added by
a previous instance, and then add nftables rules for the new instance
(in the case that an admin, or possibly an update, switches the driver
backend from iptables to nftable)
Initially, the enum will only have one usable value -
VIR_FIREWALL_BACKEND_IPTABLES, and that will be hardcoded into all
calls to virFirewallNew(). The other enum value (along with a method
of setting it for each driver) will be added later, when it can be
used (when the nftables backend is in the code).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We know at the time a virFirewallCmd is created (with
virFirewallAddCmd*()) whether or not we will later want to ignore
errors encountered when attempting to apply that command - if
ignoreErrors is set in the AddCmd or if the group has already had
VIR_FIREWALL_TRANSACTION_IGNORE_ERRORS set, then we ignore the errors.
Rather than setting the fwCmd->ignoreErrors only according to the arg
sent to virFirewallAddCmdFull(), and then later (at ApplyCmd-time)
combining that with the group transactionFlags setting (and passing it
all the way down the call chain), just combine the two flags right
away and store this final value in fwCmd->ignoreErrors when the
virFirewallCmd is created (thus avoiding the need to look at anything
other than fwCmd->ignoreErrors at the time the command is applied). Once
that is done, we can simply grab ignoreErrors from the object down in
virFirewallApply() rather than cluttering up the argument list on the
entire call chain.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We will already need a separate function for virFirewallApplyCmd for
iptables vs. nftables, but the only reason for needing a separate
function for virFirewallAddCmd* is that iptables/ebtables need to have
an extra arg added for locking (to prevent multiple iptables commands
from running at the same time). We can just as well add in the
-w/--concurrent during virFirewallApplyCmd, so move the arg-add to
ApplyCmd to keep AddCmd simple.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In normal practice a virFirewallCmd should never have 0 args by the
time it gets to the Apply stage, but at some time while debugging one
of the other patches in this series, exactly that happened (due to a
bug that was since squashed), and having a check for it helped
debugging, so let's permanently check for it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
I had originally named these as VIR_NETFILTER_* because I assumed the
same enum would eventually be used by our nftables backend as well as
iptables. But it turns out that in most cases it's not possible to
delete an nftables rule, so we just never used the enum anyway, so
this patch is renaming the values to IPTABLES_ACTION_*, and taking
advantage of the newly defined (via VIR_ENUM_DECL/IMPL)
iptablesActionTypeToString() to replace all the ternary operators used
to translate the enum into a string for the iptables commandline with
iptablesActionTypeToString().
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These objects aren't rules, they are commands that are executed that
may create a firewall rule, delete a firewall rule, or simply list the
existing firewall rules. It's confusing for the objects to be called
"Rule" (especially in the case of the function
virFirewallRemoveRule(), which doesn't remove a rule from the
firewall, it takes one of the objects out of the list of commands to
execute! In order to remove a rule from the host's firewall, you have
to Add a "rule" (now "cmd" aka command) to the list that will, when
applied/run, remove a rule from the host firewall.)
Changing the name to virFirewallCmd makes it all much less confusing.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the toplevel iptables functions have been moved out of the
linux bridge driver into network_iptables.c, all of the utility
functions are used only within that same file, so simplify it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Although initially we will add exactly the same rules for the nftables
backend, the two may (hopefully) soon diverge as we take advantage of
nftables features that weren't available in iptables. When we do that,
there will need to be a different version of these functions (currently in
bridge_driver_linux.c) for each backend:
networkAddFirewallRules()
networkRemoveFirewallRules()
networkSetupPrivateChains()
Although it will mean duplicating some amount of code (with just the
function names changed) for the nftables backend, this patch moves all
of the rule-related code in the above three functions into iptables*()
functions in network_iptables.c, and changes the functions in
bridge_driver_linux.c to call the iptables*() functions. When we make
a different backend, it will only need to make equivalents of those 3
functions publicly available to the upper layer.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These functions are only ever used by the network driver, and are so
specific to the network driver's usage of iptables that they likely
won't ever be used elsewhere. The files are renamed to
network_iptables.[ch] to be more in line with driver-specific file
naming conventions.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virStateDriver struct has .stateInitialize callback which is
declared to return virDrvStateInitResult enum. But some drivers
return a plain int in their implementation which is UB.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For the links of drvinterface, drvnetwork, drvnwfilter, and Nagios-virt,
there are no alternative docs. Just remove them directly.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There was no test for this and we mistakenly used 'B' rather than 'T'
when constructing the json value for this parameter. Thus, a value of
'off' was VIR_TRISTATE_SWITCH_OFF=2, which was translated to a boolean
value of 'true'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Unlike other input types, evdev is not a true device since it's backed by
'-object'. We must use object-add/object-del monitor commands instead of
device-add/device-del in this particular case.
This patch adds support for handling live attachment and
detachment of evdev type devices.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/529
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As a general rule, we use defines for features that can only be
enabled on a subset of the platforms that we target, and we
don't offer fine-grained control over every single possible
meson configuration knob at the RPM level.
In the case of ssh-proxy, we are enabling it everywhere already,
so having a define for it is unnecessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The ssh-proxy feature works independently of the clients,
just like the NSS plugin does.
Moreover, ssh-proxy only works for local VMs, while clients
are routinely used to manage remote hypervisors.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The refactor of the libvirt tools command parser introduced a bug where
the '--help' option would cause an error:
$ virsh list --help
error: command 'list' doesn't support option --help
rather than printing the help for the command as the help option is
supposed to be handled separately from the real options.
Re-introduce the separate handling to the new parser code.
Fixes: 5540c3d241
Resolves: https://issues.redhat.com/browse/RHEL-36565
Reported-by: Lili Zhu <lizhu@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
I've noticed some tests fail to run under valgrind with the
following error:
$ valgrind --leak-check=full --trace-children=yes ./qemuxmlconftest
valgrind: symbol lookup error: libvirt.git/_build/tests/libdomaincapsmock.so: undefined symbol: virQEMUCapsGet
But without valgrind the test passes just fine. While we usually
don't want to change our code just to adhere to random tools, in
this case we ought to make an exception because valgrind helps us
to detect memory leaks.
NB, the --trace-children=yes is needed whenever a test
re-executes itself, i.e. when it uses mocks. Otherwise we'd just
get (boring) result for the first invocation of main() which does
nothing more than sets up the environment and calls exec().
When running the test binary without valgrind I can see the
libtest_qemu_driver.so being loaded even after exec:
$ LD_DEBUG=libs ./qemuxmlconftest 2>&1 | grep -e libtest_qemu_driver.so -e virQEMUCapsGet
6439: find library=libtest_qemu_driver.so [0]; searching
6439: trying file=libvirt.git/_build/tests/../src/libtest_qemu_driver.so
6439: trying file=libvirt.git/_build/tests/glibc-hwcaps/x86-64-v3/libtest_qemu_driver.so
6439: trying file=libvirt.git/_build/tests/glibc-hwcaps/x86-64-v2/libtest_qemu_driver.so
6439: trying file=libvirt.git/_build/tests/libtest_qemu_driver.so
6439: calling init: libvirt.git/_build/tests/libtest_qemu_driver.so
6439: find library=libtest_qemu_driver.so [0]; searching
6439: trying file=libvirt.git/_build/tests/libtest_qemu_driver.so
6439: calling init: libvirt.git/_build/tests/libtest_qemu_driver.so
6439: calling fini: libvirt.git/_build/tests/libtest_qemu_driver.so [0]
But running the same under valgrind:
$ LD_DEBUG=libs valgrind --leak-check=full --trace-children=yes ./qemuxmlconftest 2>&1 | grep -e libtest_qemu_driver.so -e virQEMUCapsGet
6515: find library=libtest_qemu_driver.so [0]; searching
6515: trying file=libvirt.git/_build/tests/../src/libtest_qemu_driver.so
6515: trying file=libvirt.git/_build/tests/glibc-hwcaps/x86-64-v3/libtest_qemu_driver.so
6515: trying file=libvirt.git/_build/tests/glibc-hwcaps/x86-64-v2/libtest_qemu_driver.so
6515: trying file=libvirt.git/_build/tests/libtest_qemu_driver.so
6515: calling init: libvirt.git/_build/tests/libtest_qemu_driver.so
6515: libvirt.git/_build/tests/libdomaincapsmock.so: error: symbol lookup error: undefined symbol: virQEMUCapsGet (fatal)
valgrind: symbol lookup error: libvirt.git/_build/tests/libdomaincapsmock.so: undefined symbol: virQEMUCapsGet
To me, it looks like valgrind forced linker to lookup symbols
"sooner", as individual libraries are loaded. But I must admit I
have no idea how valgrind does that (or if that's even valgrind's
'fault').
But fix is pretty simple: link mocks that rely on symbols from
the QEMU driver with the QEMU driver, well, its test suite
suitable version (libtest_qemu_driver.so).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The message that's thrown at users when they try to open a pull
request on github suggests opening the MR on gitlab instead.
While this works for other libvirt subprojects, for the main
libvirt.git we still use e-mail workflow. Update the message to
reflect this fact.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add a missing option for the test to prove that we parse/format this
option.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adds documentation for the <snapshotDeleteInProgress/> element to
the libvirt snapshot format XML reference. The <snapshotDeleteInProgress/>
element, introduced at commit 565bcb5d79, ensures the consistency of qcow2
images during snapshot deletion operations by marking disks in snapshot
metadata as invalid until deletion is successfully completed.
The commit was merged but the related documentation was missing.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/609
Signed-off-by: Abhiram Tilak <atp.exp@gmail.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It's currently running against AlmaLinux 8 which went out of
support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's currently running against AlmaLinux 8 which went out of
support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ubuntu 24.04 was released recently. Add it to our CI. Also, to be
able to run ASAN/UBSAN builds on Ubuntu 24.04 libclang-rt-dev
needs to be installed (because clang's runtime was moved into a
separate package). Hence so many seemingly unrelated changes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we don't have any distro stuck with glib-2.56.0, we can
bump the glib version. In fact, this is needed, because of
g_clear_pointer. Since v7.4.0-rc1~301 we declare at compile time
what version of glib APIs we want to use (by setting
GLIB_VERSION_MIN_REQUIRED = GLIB_VERSION_MAX_ALLOWED = 2.56.0),
regardless of actual glib version in the host.
And since we currently require glib-2.56.0 and force glib to use
APIs of that version, some newer bits are slipping from us. For
instance: regular function version of g_clear_pointer() is used
instead of a fancy macro. So what? Well, g_clear_pointer()
function typecasts passed free function to void (*)(void *) and
then calls it. Well, this triggers UBSAN, understandably. But
with glib-2.58.0 the g_clear_pointer() becomes a macro which
calls the free function directly, with no typecasting and thus no
undefined behavior.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's now more than two years since Ubuntu 22.04 was released and
per our support policy, Ubuntu 20.04 (the previous major release)
is now not supported. Remove it from our CI testing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since Fedora 40 was released recently, Fedora 38 is now
unsupported. Drop Fedora 38 and introduce Fedora 40 to our CI.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By the time of release, it's going to be more than two years
since AlmaLinux 9 was released and per our support policy,
AlmaLinux 8 (the previous major release) will be not supported.
Switch from AlmaLinux 8 to AlmaLinux 9.
This also means the website_job which depends on AlmaLinux 8
needs to be moved to newer AlmaLinux.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Strictly speaking, xdrproc_t is declared as following:
typedef bool_t (*xdrproc_t)(XDR *, ...);
But our rpcgen generates properly typed functions, e.g.:
bool_t xdr_virNetMessageError(XDR *xdrs, virNetMessageError *objp)
Now, these functions of ours are passed around as callbacks (via
an argument of xdrproc_t type), for instance in
virNetMessageEncodePayload(). But these two types are strictly
different. We silence the compiler by typecasting the callbacks
when passing them, but strictly speaking - calling such callback
later, when a function of xdrproc_t is expected is an undefined
behavior.
Ideally, we would fix our rpcgen to generate proper function
headers, but: a) my brain is too small to do that, and b) we
would lose compiler protection if an xdr_*() function is called
directly but argument of a wrong type is passed.
Silence UBSAN for now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
