Update to v6.1.0-1510-gc148a05721 which most notably adds the 'json-cli'
feature for 'device_add' QMP command meaning that -device accepts JSON.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two variables (@vm and @domflags) in qemuConnectGetAllDomainStats()
that are used only within the for() loop but declared for entire function.
Bring them into the loop to make it obvious they are not used outside of it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Our general pattern is to initialize @ret to -1 and set it to 0
only at the end of a function. Some functions in
objecteventtest.c do not follow this pattern.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The sole purpose of the lifecycleEventCounter_reset() function is
to zero out given lifecycleEventCounter struct. Well, we can let
the compiler zero it out when declaring a variable and just
remove the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
I think that virsh domstats problem on qemu < 5.2.0 is what users want
to find which version fixes.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
query-dirty-rate command is used for virsh domstats by default, but this
is available only on qemu >=5.2.0.
By this commit, qemu domain stats will check capabilities requirements before issuing actual query.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
One of qemuDomainGetStatsWorkers requires capabilities to run.
This commit adds capability information to qemuDomainGetStatsWorkers.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
query-dirty-rate command is used for virsh domstats by default, but this
is available only on qemu >=5.2.0.
In this commit, add capability flag for query-dirty-rate first.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There have been countless reports from users concerned about the following
error reported by libvirtd when qemu domains are shutdown
internal error: End of file from qemu monitor
While the error is harmless, users often mistaken it for real problem with
their deployments. EOF from the monitor can't be entirely ignored since
other threads may be using the monitor and must be able to detect the EOF
condition.
One potential fix is to delay reporting EOF until the monitor is used
after EOF is detected. This patch adds a 'goteof' member to the
qemuMonitor structure, which is set when EOF is detected on the monitor
socket. If another thread later tries to send data on the monitor, the
EOF error is reported.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are few functions in virnetsocket.c where an object/memory
is freed by explicit call. Use g_autoptr()/g_autofree/VIR_AUTOCLOSE
to do that automatically.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of virNetSocketNewConnectCommand() is to execute passed
command and attach socket pair/pipe to it so that client socket
can be opened (this is used for connections with alternative
transports, e.g. ssh). The virCommand is created in a caller and
then passed to virNetSocketNewConnectCommand() where it is freed
using virCommandFree(). This approach is wrong on two levels:
1) The deallocation happens on a different level than allocation,
2) There's a WIN32 stub that just reports an error and doesn't
free the command.
However, with g_autoptr() trickery the command can be freed in
caller.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit ad209e7d adds QEMU_CAPS_VIRTIO_BLK_QUEUE_SIZE capability, but
the following commit 2d6d67e1 missed to use it and uses
QEMU_CAPS_VIRTIO_BLK_NUM_QUEUES instead.
This commit fixes the mistake.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The capability reflects whether QEMU is capable of -device
virtio-*,ats=. Since the property was introduced in QEMU commit
v2.9.0-rc0~162^2~32 we can safely assume the property is always
present as the minimal version required is 2.11.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some tests cases in qemuxml2argvtest that aim to check
whether our validator rejects <driver ats=''/> when
QEMU_CAPS_VIRTIO_PCI_ATS capability is not present. Well, such
scenario can't happen really because the capability will always
be present.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The capability reflects whether QEMU is capable of -device
virtio-*,iommu_platform=. Since the property was introduced in
QEMU commit v2.9.0-rc0~162^2~37 we can safely assume the property
is always present as the minimal version required is 2.11.0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some tests cases in qemuxml2argvtest that aim to check
whether our validator rejects <driver iommu=''/> when
QEMU_CAPS_VIRTIO_PCI_IOMMU_PLATFORM capability is not present.
Well, such scenario can't happen really because the capability
will always be present.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are a few files containing expected output for test cases
that no longer exist. Remove them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We did not set priv->migMaxBandwidth if '--bandwidth' was
specified as an option in the 'migrate' virsh command. This
caused in printing the wrong value if virsh command
'migrate-getspeed' was called during the migration. This patch
first sets the value to the given bandwidth (if one was
specified) and restores the previous value after the migration.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1806856
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
QEMU declares the bootindex types as:
bootindexA=<int32>
bootindexB=<int32>
The driveA/driveB parameters were deprecated and removed in qemu-6.0.
We'll keep them for compatibility, but they are not used with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuBuildFloppyCommandLineControllerOptions was generating config for
both the implicit and explicit fdc. The explicit FDC is using '-device'
and thus will need to be converted to JSON.
Split up the lookup of the floppy drive configs from the actual command
generation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU declares the props we control as:
'ccid-card-emulated'
backend=<str>
cert1=<str>
cert2=<str>
cert3=<str>
db=<str>
'ccid-card-passthru'
chardev=<str> - ID of a chardev to use as a backend
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While this device doesn't have any properties it must be converted to
use qemuBuildDeviceCommandlineFromJSON so that we can validate it in the
future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU declares the 'guid' property as:
guid=<str> - UUID (aka GUID) or "auto" for random value (default) (default: "auto")
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move it into the validator. Note that the placement into the device
validation part is intentional so that it also covers hotplug code
paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have a commonly used helper virDomainControllerAliasFind, which does
the same thing and also reports errors internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'virXMLPropEnum' to parse it and fix all switch statements which
didn't include the VIR_DOMAIN_SMARTCARD_TYPE_LAST case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't check the type twice, move the chardev validation into the
switch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the code was converted to use this helper we can remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a50c473ad6 ("qemu: move temp file of screenshot and memorypeek to
per-domain dir") and c4f3c955d5 ("qemu: don't change ownership of
cache directory"), I move the temporary files of screenshot and
memorypeek from the cache directory to per-domain directory, and the
only user of the cache directory is the domain capabilities currently.
Since the domain capabilities are used by libvirtd, no need to set the
ownership of the cache directory to qemu_user and qemu_group.
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some people from Red Hat does not use 'redhat.com' domain emails.
They use personal or other domains.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
../../work/libvirt/src/qemu/qemu_hotplug.c: In function ‘qemuDomainAttachFSDevice’:
../../work/libvirt/src/qemu/qemu_hotplug.c:3458:68: error: ordered comparison of pointer with integer zero [-Werror=extra]
3458 | if (qemuBuildVHostUserFsDevProps(fs, vm->def, charAlias, priv) < 0)
| ^
cc1: all warnings being treated as errors
Fixes: b987873034
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The data is based on commit v6.1.0-1313-gc09124dcb8
Notable changes:
- New machine types for the 6.2 cycle were added
- MEM_UNPLUG_ERROR event was deprecated and replaced by
DEVICE_UNPLUG_GUEST_ERROR
- Intel SGX related commands and devices added
- 'copy-before-write' blockdev filter was added
- 'memory-backend-epc' was added
- new cpu flags
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Do not depend on passing a logManager. Create a new connection.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We control only the 'tpmdev' property of TPM devices which is a string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The codec devices have the following properties we control:
cad=<uint32> - (default: 4294967295)
audiodev=<str> - ID of an audiodev to use as a backend
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The sound devices have only the 'audiodev' property which is a string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
