There will shortly be many connection objects, so we should not assume a
single check against priv->conn is sufficient.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Calling a push_privconn method to directly push the connection object
name into the arg list is inconvenient. Refactor so that we acquire
the connection variable name upfront, and push it to the arg list
separately. This allows various hardcoded usage of "priv->conn" to
be parameterized.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Described how we decide which host platforms to support for libvirt,
which in turn makes it easier to decide when a platform / software
version can be dropped.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
I haven't been able to come up with a single scenario in which
the code in question would be executed; even if there was one,
it would be due to the user specifying a *partial* PCI topology
in the guest XML, which is of course entirely unsupportable and
thus providing even the slightest hint that doing so is in any
way a good idea is actively harmful.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since the introduction of log tuning capabilities to virt-admin by
@06b91785, this has been a much needed missing improvement on the way to
deprecate the global 'log_level'.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When applying the log filters, one has to define the more specific
filters before the generic ones, because the first filter that matches
will be applied. However, we've been missing this information in the
config, so it always has been a trial-error scenario figuring out that
e.g. '4:util 1:util.pci' doesn't actually enable verbose logging on the
src/util/virpci.c module because 4:util will be matched first.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Initially, update the UUID field to have the proper format, but
then also changed the type, id, and name fields.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When virDomainObjParseFile runs, it returns a locked @obj with
one reference. Rather than just use virObjectUnref to clean that
up, use virObjectEndAPI.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the virHashAddEntry fails, then we need to "careful" about
how we free the @obj. When virDomainObjParseFile returns there
is one reference and the object is locked, so use virDomainObjEndAPI
when done.
Add a virObjectRef in the error path for the second virHashAddEntry
call since it doesn't call virObjectRef, but virHashRemoveEntry
will call virObjectUnref because virObjectFreeHashData is called
when the element is removed from the hash table as set up in
virDomainObjListNew.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the virHashAddEntry fails, then we need to "careful" about
how we free the @vm. When virDomainObjNew returns there is one
reference and the object is locked, so use virDomainObjEndAPI
when done.
Add a virObjectRef in the error path for the second virHashAddEntry
call since it doesn't call virObjectRef, but virHashRemoveEntry
will call virObjectUnref because virObjectFreeHashData is called
when the element is removed from the hash table as set up in
virDomainObjListNew.
Eventually these paths should goto error and error should be changed
to use EndAPI as well, but that requires more adjustments to other
paths in the code to have a locked and ref counted @vm.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Now that support for the pcie-to-pci-bridge controller has
been implemented, adding the QEMU_CAPS_DEVICE_PCIE_PCI_BRIDGE
capability to the existing test is enough to cause the guest
to use pcie-to-pci-bridge instead of dmi-to-pci-bridge.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Both pcie-to-pci-bridge and dmi-to-pci-bridge can be used to
create a traditional PCI topology in a pure PCIe guest such as
those using the x86_64/q35 or aarch64/virt machine type;
however, the former should be preferred, as it doesn't need to
obey limitation of real hardware and is completely
architecture-agnostic.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1520821
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Just like the existing areMultipleRootsSupported, this will
allow us to change the results of the driver-agnostic PCI
address allocation logic based on whether the QEMU binary
supports certain features.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The new controller will not yet be used automatically by
libvirt, but at this point it's already possible to configure
a guest to use it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability will be set when the pcie-pci-bridge device
is available in the QEMU binary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We're going to add a similarly-named attribute later, and we'd
like to be consistent.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This test shows what happens when you add a traditional PCI
device such as pci-serial to a pure PCIe machine type such
as aarch64/virt.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Instead of first listing the models on their own, and then
listing them again grouped by the libvirt release they were
introduced in, have a single list.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When preparing for migration, the libxl driver creates a new TCP listen
socket for the incoming migration by calling virNetSocketNewListenTCP,
passing the destination host name. virNetSocketNewListenTCP calls
virSocketAddrParse to check if the host name is a wildcard address, in
which case it avoids adding the AI_ADDRCONFIG flag to the hints passed to
getaddrinfo. If the host name is not an IP address, virSocketAddrParse
reports an error
error : virSocketAddrParseInternal:121 : Cannot parse socket address
'myhost.example.com': Name or service not known
But virNetSocketNewListenTCP succeeds regardless and the overall migration
operation succeeds.
Introduce virSocketAddrParseAny and use it when simply testing if a host
name/addr is parsable.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1557769
Problem with device mapper targets is that there can be several
other devices 'hidden' behind them. For instance, /dev/dm-1 can
consist of /dev/sda, /dev/sdb and /dev/sdc. Therefore, when
setting up devices CGroup and namespaces we have to take this
into account.
This bug was exposed after Linux kernel was fixed. Initially,
kernel used different functions for getting block device in
open() and ioctl(). While CGroup permissions were checked in the
former case, due to a bug in kernel they were not checked in the
latter case. This changed with the upstream commit of
519049afead4f7c3e6446028c41e99fde958cc04 (v4.16-rc5~11^2~4).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This helper fetches dependencies for given device mapper target.
At the same time, we need to provide a dummy log function because
by default libdevmapper prints out error messages to stderr which
we need to suppress.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We store all JSON numbers as strings. To allow using json libraries
that store them in numeric types, use a more predictable and normalized
value.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Rather than using virDomainObjListFindByID, let's be more consistent
and return a reffed and locked object. Since we're using the Ref API,
use virDomainObjEndAPI on @dom and not just virObjectUnlock.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Rather than using virDomainObjListFindByUUID, let's be more consistent
and return a reffed and locked object. Since we're using the Ref API,
use virDomainObjEndAPI on @dom and not just virObjectUnlock.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
For all @dom's fetched from a testDomObjFromDomain because
virDomainObjListRemove will return an unlocked domain object
we should relock it prior to the cleanup label which will use
virDomainObjEndAPI which would Unlock and Unref the passed
object (and we should avoid unlocking an unlocked object).
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Similarly to 3506f1ecfd, the contents of 'cmpcontent' may be an empty
string so the following code would access memory out of the array.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since RPC support moved out of glibc we need to have explicit deps on
the new packages providing this functionality
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The qemu command line generator code set disk caching of shareable disks
to 'none' when formatting the command line silently. Move this code to a
common place when preparing the domain definition for startup so that it
does not have to be duplicated.
The new test case shows that the actual cache mode will now be recorded
in the live XML definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add a new kind of XML output test for the files in qemuxml2argvtest
where we can validate setup and defaults applied when starting up the
VM.
This is achieved by formatting of the definition processed by the
qemuxml2argvtest into a XML and it's compared against files in
qemuxml2startupxmloutdata. This test is automatically executed if the
output file is present and it's skipped otherwise.
The first example test case is created from 'disk-drive-shared' test
case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The old qcow2 encryption format was buggy, so the new approach is to use
luks inside qcow2. As it turns out, it didn't require that many changes.
It was necessary to fix the command line formatter to stop mangling the
format when secrets are present and specify the encryption format and
secret in correct format.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This format is used by the storage driver and other hypervisors but qemu
does not have notion of the 'iso' format and libvirt does not translate
it to anything useful, so it would not work anyways. Users should use
'raw' instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This is a storage driver type, which is not handled in qemu driver
properly. For accessing directories, disk type 'dir' is used instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
