virsh command domxml-to-native failed with below error but start
command succeed for same domain xml.
"internal error: invalid PCI passthrough type 'default'"
If a <hostdev> PCI backend is not set in the XML, the supported
one is then chosen in qemuHostdevPreparePCIDevicesCheckSupport().
But this function is not called anywhere from
qemuConnectDomainXMLToNative(). But qemuDomainPrepareHostdev()
is. And it is also called from domain startup/hotplug code.
Therefore, move the backend setting to the common path and drop
qemuHostdevPreparePCIDevicesCheckSupport().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
So far, qemuDomainPrepareHostdev() is a NOP for anything but a
SCSI hostdev. This will change soon. Therefore, move the SCSI
hostdev preparation into a separate function
(qemuDomainPrepareHostdevSCSI()) and make
qemuDomainPrepareHostdev() call function corresponding to the
hostdev type (or nothing if the type doesn't need any
preparation).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When attaching a hostdev of a SCSI subsys,
qemuDomainPrepareHostdev() is called. This makes sense because
the function prepares just SCSI hostdevs ignoring others. But
this will soon change. Thefore, move the function call out of
qemuDomainAttachHostSCSIDevice() and into
qemuDomainAttachHostDevice().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Treat:
<maxphysaddr mode="emulate"/>
as a request not to take the maximum address size from the host.
This is useful if QEMU changes the default.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After previous cleanups a lot of functions from qemu_hotplug.c
are called only within the file. Make them static and drop their
declarations from the header file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There is no good reason for qemuDomainUpdateDeviceLive() to live
in (ever growing) qemu_driver.c while we have qemu_hotplug.c
which already contains the rest of hotplug code. Move the
function to its new home.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There is no good reason for qemuDomainAttachDeviceLive() to live
in (ever growing) qemu_driver.c while we have qemu_hotplug.c
which already contains the rest of hotplug code. Move the
function to its new home.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The qemuDomainUpdateDeviceLive() accepts virDomainPtr as one of
its arguments, but use it only to get QEMU driver out of it.
Well, the only caller already does that and thus can pass it
instead of virDomainPtr.
This also makes it look like the rest of device hot(un-)plug
functions: qemuDomainAttachDeviceLive() and
qemuDomainUpdateDeviceLive().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
A new enum type "Default" has been added for Input bus.
The logic that handled default input bus types in
virDomainInputParseXML() has been moved to a new function
virDomainInputDefPostParse() in domain_postparse.c
Link to Issue: https://gitlab.com/libvirt/libvirt/-/issues/8
Signed-off-by: K Shiva <shiva_kr@riseup.net>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The disk private data contain information about the tray and
removability of the disk. Until recently we didn't support hotplug of
removable disks thus it wasn't a problem but now when you can hotplug a
CDROM you would not be able to open its tray.
Fix it by updating the hotplugged disk the same way we do at startup.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2160435
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the logic to update one single disk (without emitting any
events) so that it can be reused when updating the state after a disk
hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code compares the 'tray_open' boolean from 'struct
qemuDomainDiskInfo' directly against 'disk->tray_status' which is
declared as virDomainDiskTray (enum). Now the logic works correctly
because the _OPEN enum has value '1'.
Separate the event emission code from the update code and remember the
old tray state in a separate variable rather than having the sneaky
logic we have today.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With cgroupv2 this has better effect on the resource allocation. An
excerpt from Documentation/admin-guide/cgroup-v2.rst explains is this
way:
Migrating a process across cgroups is a relatively expensive operation
and stateful resources such as memory are not moved together with the
process. This is an explicit design decision as there often exist
inherent trade-offs between migration and various hot paths in terms
of synchronization cost.
[...]
Setting a non-empty value to "cpuset.mems" causes memory of
tasks within the cgroup to be migrated to the designated nodes if
they are currently using memory outside of the designated nodes.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of them are platform devices and only i6300esb can be plugged
multiple times into different PCI slots.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This makes it also work during attach. Also add a test for attaching a
watchdog with incompatible action.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2187278
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The loop initially skipped the first one because it was mainly checking
the incompatible actions, but was then modified to also check the
duplicity of iTCO watchdogs.
While at it change the type of the iteration variable to the usual size_t.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2187133
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can launch qemu with it, but it will not work since it's not even
probed by the kernel at the mapped address with different machine types
since they are expected to be connected to ISA and not even its newer
LPC counterpart found on q35. And it does not exist on non-x86
architectures.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting QEMU, or when hotplugging a PCI device QEMU might
lock some memory. How much? Well, that's an undecidable problem.
But despite that, we try to guess. And it more or less works,
until there's a counter example. This time, it's a guest with
both <hostdev/> and an NVMe <disk/>. I've started a simple guest
with 4GiB of memory:
# virsh dominfo fedora
Max memory: 4194304 KiB
Used memory: 4194304 KiB
And here are the amounts of memory that QEMU tried to lock,
obtained via:
grep VmLck /proc/$(pgrep qemu-kvm)/status
1) with just one <hostdev/>
VmLck: 4194308 kB
2) with just one NVMe <disk/>
VmLck: 4328544 kB
3) with one <hostdev/> and one NVMe <disk/>
VmLck: 8522852 kB
Now, what's surprising is case 2) where the locked memory exceeds
the VM memory. It almost resembles VDPA. Therefore, treat is as
such.
Unfortunately, I don't have a box with two or more spare NVMe-s
so I can't tell for sure. But setting limit too tight means QEMU
refuses to start.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2014030
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It's quite difficult, if not impossible, to create a working RISC-V VMs
using the current default machine type of 'spike_v1.10'. Change the
default to the more appropriate and virtualization friendly 'virt'
machine type.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It's quite difficult, if not impossible, to create a usable ARM VMs
using the current default machine type of 'integratorcp'. Change the
default to the more appropriate and virtualization friendly 'virt'
machine type.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
I've tried, then I've tried even harder, but still wasn't able to
make sense of our console backcompat code in all its fine
details. Since I value my sanity, let's just forbid hotunplug of
<console/>, especially since detaching of corresponding <serial/>
works.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When cleaning up after removed device, qemuDomainChrRemove() is
called. But this may fail, in which case we successfully ignore
the failure and virDomainChrDefFree() the device anyway. While it
decreases our memory consumption, it's a bit too far, especially
if the next step is 'virsh dumpxml'. Then our memory consumption
decreases all the way down to zero as we crash.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For a running guest, a <serial/> device can be hotunplugged. This
will then remove also aliased <console/>. Trying to hotplug a
<console/> device then, libvirtd crashed because it dereferences
def->consoles while there's none.
Fixes: 42d53ac799a1d7f1414737caa4deb73871876992
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When removing the compat console from domain defintion, removing
it from the vmdef->consoles array is good, but not sufficient.
The console definition might have been fully allocated (after
daemon restarted and reloaded the status XML). Use
virDomainChrDefFree() to free also the definition.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When hotpluging a <serial/> device, we might need to add a
<console/> device with it (because of some crazy backcompat).
Now, hotplugging is done in several phases. In one of them,
qemuDomainChrPreInsert() allocates space for both devices, and
then qemuDomainChrInsertPreAlloced() actually inserts the device
into domain definition and sets up the <console/> device with it.
Except, the condition that checks whether to create the aliased
<console/> is wrong as it compares nconsoles against 0.
Surprisingly, qemuDomainChrInsertPreAllocCleanup() doesn't suffer
from the same error.
Fixes: daf51be5f1b0f7b41c0813d43d6b66edfbe4f6d9
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
igb is a new network device which will be introduced with QEMU 8.0.0.
It is a successor of e1000e so it has PCIe interface and is understands
virtio-net headers as e1000e does.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
During qemu driver shutdown, objects are freed in qemuStateCleanup that
could still be used by active worker threads, resulting in crashes. E.g.
a worker thread could be processing a monitor EOF event after the
security manager is already disposed
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00007fd9a9a1e1fe in virSecurityManagerMoveImageMetadata (mgr=0x7fd948012160, pid=-1, src=src@entry=0x7fd98c072c90, dst=dst@entry=0x0)
at ../../src/security/security_manager.c:468
#1 0x00007fd9646ff0f0 in qemuSecurityMoveImageMetadata (driver=driver@entry=0x7fd948043830, vm=vm@entry=0x7fd98c066db0, src=src@entry=0x7fd98c072c90,
dst=dst@entry=0x0) at ../../src/qemu/qemu_security.c:182
#2 0x00007fd96462c7b0 in qemuBlockRemoveImageMetadata (driver=driver@entry=0x7fd948043830, vm=vm@entry=0x7fd98c066db0, diskTarget=0x7fd98c072530 "vda",
src=<optimized out>) at ../../src/qemu/qemu_block.c:2628
#3 0x00007fd9646929d6 in qemuProcessStop (driver=driver@entry=0x7fd948043830, vm=vm@entry=0x7fd98c066db0, reason=reason@entry=VIR_DOMAIN_SHUTOFF_SHUTDOWN,
asyncJob=asyncJob@entry=QEMU_ASYNC_JOB_NONE, flags=<optimized out>) at ../../src/qemu/qemu_process.c:7585
#4 0x00007fd9646fc842 in processMonitorEOFEvent (vm=0x7fd98c066db0, driver=0x7fd948043830) at ../../src/qemu/qemu_driver.c:4794
#5 qemuProcessEventHandler (data=0x561a93febb60, opaque=0x7fd948043830) at ../../src/qemu/qemu_driver.c:4900
#6 0x00007fd9a9971a31 in virThreadPoolWorker (opaque=opaque@entry=0x561a93fb58e0) at ../../src/util/virthreadpool.c:163
(gdb) p mgr->drv
$2 = (virSecurityDriverPtr) 0x0
Prior to commit 7cf76d4e3ab, the worker thread pool was freed before
disposing any driver objects. Let's return to that pattern, but leave
the other changes made by 7cf76d4e3ab.
Signed-off-by: Tamara Schmitz <tamara.schmitz@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Historically the snapshot code attempted to forbid internal snapshots
with UEFI both in active and inactive case. Unfortunately due to the
intricacies of UEFI probing this didn't really work for inactive VMs
which made users rely on the feature.
Now with the changes to store detected UEFI environment also in the
inactive definition this broke the feature for those users.
Since the varstore doesn't really change that much in the lifecycle of a
VM it usually is okay to simply leave it as is.
Restore the functionality for inactive snapshots by disabling the check.
In the future when uefi snapshotting will be added the rest of the
condition will also be removed.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/460
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Attaching disk into running VM the offline definition may not be
updated and we will end up with that disk existing only in live
definition. Creating snapshot with this state saves both live and
offline definition into snapshot metadata.
When we are deleting an external snapshot we are updating these
definitions in the snapshot metadata so we should just skip over
non-existing disks instead of reporting error.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2174700
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unify validation of VIR_DOMAIN_FEATURE_HTM, VIR_DOMAIN_FEATURE_NESTED_HV,
VIR_DOMAIN_FEATURE_CCF_ASSIST and remove temporary string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The features:
QEMU_CAPS_MACHINE_PSERIES_CAP_HPT_MAX_PAGE_SIZE
QEMU_CAPS_MACHINE_PSERIES_CAP_HTM
QEMU_CAPS_MACHINE_PSERIES_CAP_NESTED_HV
QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
QEMU_CAPS_MACHINE_PSERIES_CAP_CFPC
QEMU_CAPS_MACHINE_PSERIES_CAP_SBBC
QEMU_CAPS_MACHINE_PSERIES_CAP_IBS
are supported by all qemu versions that libvirt supports. Drop the
obsolete checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic pointer freeing, remove 'ret' variable and also remove
return value completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove useless call to virCapabilitiesFreeMachines as the pointers were
cleared and the unneeded 'ret' variable. Since we don't need to clear
the 'machines' pointer now, remove that as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's never set to any real value. Remove it along with the caching code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the architecture specific code to probe the support for HVF
from the actual setting of the capability.
In upcoming patches 'virQEMUCapsProbeHVF' will be mocked in the
testsuite to provide testing for the HVF hypervisor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The logic in 'virQEMUCapsInitQMP' invokes a second probe of qemu in case
when acceleration is used and TCG is supported to specifically probe the
CPU and features of non-accelerated guests.
The same logic must then be used in 'qemucapabilitiestest' when
replaying the data for testing otherwise the test would fail.
Export 'virQEMUCapsHaveAccel' for test usage and use the same logic
in 'testQemuCaps'.
Fix the comment in 'virQEMUCapsInitQMP' to outline what's happening.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
