After attesting a domain with the help of domlaunchsecinfo,
domsetlaunchsecstate can be used to set a secret in the guest
domain's memory prior to running the vcpus.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Let's imagine a guest that's configured with strict numatune:
<numatune>
<memory mode='strict' nodeset='0'/>
</numatune>
For guests with NUMA:
Depending on machine type used (see commit v6.4.0-rc1~75) we
generate either:
1) -object '{"qom-type":"memory-backend-ram","id":"ram-node0",\
"size":20971520,"host-nodes":[0],"policy":"preferred"}' \
-numa node,nodeid=0,cpus=0,memdev=ram-node0
or
2) -numa node,nodeid=0,cpus=0,mem=20480
Later, when QEMU boots up and cpuset CGroup controller is
available we further restrict QEMU there too. But there's a
behaviour difference hidden: while in case 1) QEMU is restricted
from beginning, in case 2) it is not and thus it may happen that
it will allocate memory from different NUMA node and even though
CGroup will try to migrate it, it may fail to do so (e.g. because
memory is locked). Therefore, one can argue that case 2) is
broken. NB, case 2) is exactly what mode 'restrictive' is for.
However, in case 1) we are unable to update QEMU with new
host-nodes, simply because it's lacking a command to do so.
For guests without NUMA:
It's very close to case 2) from above. We have commit
v7.10.0-rc1~163 that prevents us from outputting host-nodes when
generating memory-backend-* for system memory, but that simply
allows QEMU to allocate memory anywhere and then relies on
CGroups to move it to desired location.
Due to all of this, there is no reliable way to change nodeset
for mode 'strict'. Let's forbid it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The whole idea of VIR_DOMAIN_NUMATUNE_MEM_RESTRICTIVE is that the
memory location is restricted only via CGroups and thus can be
changed on the fly (which is exactly what
qemuDomainSetNumaParamsLive() does. Allow this mode there then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
While we document possibility of passing an integer from
virDomainNumatuneMemMode enum, we list string variants to only
the first three enum members. The fourth (and so far the last)
member is called 'restrictive' and thus should be documented.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
While some SEV info is reported in the domain capabilities,
for reasons of size, this excludes the certificates. The
nodesevinfo command provides the full set of information.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This command reports the launch security parameters for
a guest, allowing an external tool to perform a launch
attestation.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Non-shared storage migration of guests which are disk I/O intensive and
have fast local storage may actually never converge if the guest happens
to dirty the disk faster than it can be copied.
This patch introduces a new flag
'VIR_MIGRATE_NON_SHARED_SYNCHRONOUS_WRITES' which will instruct
hypervisors to synchronize local I/O writes with the writes to remote
storage used for migration so that the guest can't overwhelm the
migration. This comes at a cost of decreased local I/O performance for
guests which behave well on average.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the paragraphs where the topic changes to simplify further
additions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when the destination storage is slower than the normal VM
storage and the VM does intensive I/O to the disk a block copy job may
never converge.
Switching it to synchronous mode will ensure that all writes done by the
guest are propagated to the destination at the cost of slowing down I/O
of the guest to the synchronous speed.
This patch adds the new API flag and implements virsh support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We've changed the behavior of this API that from now on it will always
restart the VM process and we are no longer able to revert to snapshots
created by libvirt older then 0.9.5.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new parameter group returns information about network interfaces
Signed-off-by: zhanglei <zhanglei@smartx.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Presumably the result of a copy/paste mistake, the the argument for the
`nodedev-start` command was described as a 'network' rather than a
'device'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Issuing simple QMP commands is pain as they need to be wrapped by the
JSON wrapper:
{ "execute": "COMMAND" }
and optionally also:
{ "execute": "COMMAND", "arguments":...}
For simple commands without arguments we can add syntax sugar to virsh
which allows simple usage of QMP and additionally prepares also for
passing through of the 'arguments' section:
virsh qemu-monitor-command $VM query-status
is equivalent to
virsh qemu-monitor-command $VM '{"execute":"query-status"}'
and
virsh qemu-monitor-command $VM query-named-block-nodes '{"flat":true}'
or
virsh qemu-monitor-command $VM query-named-block-nodes '"flat":true'
is equivalent to
virsh qemu-monitor-command $VM '{"execute":"query-named-block-nodes", "arguments":{"flat":true}}'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
New 'update-memory-device' command is introduced which aims on
making it user friendly to change <memory/> device. So far I just
need to change <requested/> so I'm introducing --requested-size
only; but the idea is that this is extensible for other cases
too. For instance, want to change <myElement/>? A new
--my-element argument can be easily introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Bring the documentation for nodedev-list up to date with the latest
code, especially documenting the --active and -all options.
Also add documentation for the nodedev-define, nodedev-undefine, and
nodedev-start commands.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is currently the only way to view the 'autostart' property for a
node device in virsh.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add ability to set node devices to autostart on boot or parent device
availability.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Recently, I wanted to attach an vhost-user interface but found
out that attach-interface command doesn't support it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Note that it's for internal testing use and remove the manpage entry.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function add halt polling time interface in domstats. So that
we can use command 'virsh domstats VM' to get the data if system
support.
Signed-off-by: Yang Fei <yangfei85@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In previous commit the virDomainCoreDumpWithFormat() API gained
new format. Expose it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit 95f8e3237e which introduced XML schema validation
for snapshot XMLs always asserted the validation for the XML generated
by 'virsh snapshot-create-as' on the basis that it's libvirt-generated,
thus valid.
This unfortunately isn't true as users can influence certain bits of the
XML such as the disk image path which must be a full path. Thus if a
user tries to invoke virsh as:
$ virsh snapshot-create-as upstream --diskspec vda,file=relative.qcow2
error: XML document failed to validate against schema: Unable to validate doc against /path/to/domainsnapshot.rng
Extra element disks in interleave
Element domainsnapshot failed to validate content
They get a rather useless error from the libxml2 RNG validator.
With this fix applied, we get to the XML parser in libvirtd which has a
more reasonable error:
$ virsh snapshot-create-as upstream --diskspec vda,file=relative.qcow2
error: XML error: disk snapshot image path 'relative.qcow2' must be absolute
Instead users can force validation of the XML generated by 'virsh
snapshot-create-as' by passing the '--validate' flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When querying guest info via virDomainGetGuestInfo() the
'guest-get-disks' agent command is called. It may report disk
serial number which we parse, but never report nor use for
anything else.
As it turns out, it may help management application find matching
disk in their internals.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-By: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduce command 'virsh domstats --dirtyrate' for reporting memory
dirty rate information. The info is listed as:
Domain: 'vm0'
dirtyrate.calc_status=2
dirtyrate.calc_start_time=1534523
dirtyrate.calc_period=1
dirtyrate.megabytes_per_second=5
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds delay time (steal time inside guest) to libvirt
domain per-vcpu stats. Delay time is an important performance metric.
It is a consequence of the overloaded CPU. Knowledge of the delay
time of a virtual machine helps to understand if it is affected and
estimate the impact.
As a result, it is possible to react exactly when needed and
rebalance the load between hosts. This is used by cloud providers
to provide quality of service, especially when the CPU is
oversubscribed.
It's more convenient to work with this metric in a context of a
libvirt domain. Any monitoring software may use this information.
Signed-off-by: Aleksei Zakharov <zaharov@selectel.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Before the conversion to using systemd DBus API to set the cpu.shares
there was some magic conversion done by kernel which was documented in
virsh manpage as well. Now systemd errors out if the value is out of
range.
Since we enforce the range for other cpu cgroup attributes 'quota' and
'period' it makes sense to do the same for 'shares' as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit <d505b8af58912ae1e1a211fabc9995b19bd40828> changed the cpu quota
value that reflects what kernel allows but did not update our
documentation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support to filter by 'ap_matrix' capability.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add support to filter by 'ap_card' and 'ap_queue' capabilities.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Existing practice with the filesystem fields reported for the
virDomainGetGuestInfo API is to use the singular form for
field names. Ensure the disk info follows this practice.
Fixes
commit 05a75ca2ce
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Fri Nov 20 22:09:46 2020 +0400
domain: add disk informations to virDomainGetGuestInfo
commit 0cb2d9f05d
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Fri Nov 20 22:09:47 2020 +0400
qemu_driver: report guest disk informations
commit 172b830435
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Fri Nov 20 22:09:48 2020 +0400
virsh: add --disk informations to guestinfo command
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
The information about sockets having different label than the one on the file
and the way it needs to be set is very difficult to find for those who did not
come across it before. Let's describe what needs to happen in order for the
migration to go through rather than rely on general knowledge of others.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/16
Added in support for the following parameters in attach-disk:
--source-protocol
--source-host-name
--source-host-socket
--source-host-transport
Added documentation to virsh.rst specifying usage.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The new virsh commands are:
get-user-sshkeys
set-user-sshkeys
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Separate the docs for the '--size' flag into its own paragraph and
mention that the domain may be required to be running.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some completers for libvirt related tools might want to list
domain IDs only. Just like the one I've implemented for
virt-viewer [1]. I've worked around it using some awk magic,
but if it was possible to just 'virsh list --id' then I could
drop awk.
1: https://www.redhat.com/archives/virt-tools-list/2019-May/msg00014.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
On some architectures, e.g. aarch64 and s390x, the output of
`virsh capabilities` is not suitable for use in
`virsh hypervisor-cpu-baseline`. Expand the description of the
man page to make this explicit.
https://bugzilla.redhat.com/show_bug.cgi?id=1850654
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The former is a short hand for the latter and is already widely used in
the docs. Using the short hand avoids incompatibility with the alternate
impl of rst2html5.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
These fields have existed for a very long time but they were
never documented in virsh(1).
https://bugzilla.redhat.com/show_bug.cgi?id=1354391
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Allow to filter for CSS devices.
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
This allows:
a) migration without access to network
b) complete control of the migration stream
c) easy migration between containerised libvirt daemons on the same host
Resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Local socket connections were outright disabled because there was no "server"
part in the URI. However, given how requirements and usage scenarios are
evolving, some management apps might need the source libvirt daemon to connect
to the destination daemon over a UNIX socket for peer2peer migration. Since we
cannot know where the socket leads (whether the same daemon or not) let's decide
that based on whether the socket path is non-standard, or rather explicitly
specified in the URI. Checking non-standard path would require to ask the
daemon for configuration and the only misuse that it would prevent would be a
pretty weird one. And that's not worth it. The assumption is that whenever
someone uses explicit UNIX socket paths in the URI for migration they better
know what they are doing.
Partially resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Adds new typed param for migration and uses this as a UNIX socket path that
should be used for the NBD part of migration. And also adds virsh support.
Partially resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use https: links for websites that support them.
The URIs which are used as namespace identifiers
are left alone.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
For iscsi-direct pool, the initiator is necessary for pool defining:
<pool type="iscsi-direct">
...
<initiator>
<iqn name="iqn.2013-06.com.example:iscsi-initiator"/>
</initiator>
...
</pool>
Add --source-initiator to fill the initiator iqn for
pool-create-as/pool-define-as subcommands.
https://bugzilla.redhat.com/show_bug.cgi?id=1658082
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Changes:
- Update the descriptions of --current & --config flags.
For --config, the reason to rephrase "next boot" to "next start"
is: "Next boot may still imply somebody selecting "reboot" in the
guest OS and fully expecting the changes to be applied." (per Peter
Krempa)
For --current, existing documentation says:
"If *--current* is specified, affect the current guest state."
It's not entirely clear what states can "current" mean or imply. So
rephrase it in context of the other two related flags --live and
--config.
- While at it, I also took the liberty to replace the few occurrences
of "peristent domain[s]" with "persistent guest[s]"
Fix all occurrences (i.e. as many as I could spot) of this.
(Thanks: Dan Berrangé on IRC.)
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The timeout argument for guest-agent-timeout is optional but it did not
have proper default value specified. Also update the virsh man page
accordingly.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some commands were improperly converted from original POD file. Their
names were stripped after the first dash.
Fixes: ab06dd9db3
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On Linux, changing the nodeset on 'numatune' does not imply that
the guest memory will be migrated on the spot to the new nodeset.
The memory migration is tied on guest usage of the memory pages,
and an idle guest will take longer to have its memory migrated
to the new nodeset.
This is a behavior explained in detail in the Linux kernel
documentation in Documentation/admin-guide/cgroup-v1/cpusets.rst.
The user doesn't need this level of detail though - just needs
his/her expectations under check. Running 'numastat' and hoping
for instant memory migration from the previous nodeset to the new
one is not viable.
There's also parts of the memory that are locked by QEMU in the
same place, e.g. when VFIO devices are present. Let's also
mention it as another factor that impacts the results the
user might expect from NUMA memory migration with numatune.
https://bugzilla.redhat.com/show_bug.cgi?id=1640869
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Simplify gathering the actual return value from a passed-through QMP
command when using 'qemu-monitor-command' by adding '--return-value'
switch which just extracts the 'return' section and alternatively
reports an error if the section is not present.
This simplifies gathering of some test data where the full reply would
need to be trimmed just for the actual return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Mention that we actually by default use QMP and clarify the rest
of the documentation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
You can't have two links with the same text when using named
link references (a single "_"). If you need multiple links
with the same text you must use anonymous link references
(a double "_").
There are also some duplicate section headers causing the
same problem with duplicate link targets.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Simplify human usage of secret-set-value by adding --interactive which
will read the value of the secret from the terminal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow using the contents of --file without base64 decoding.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Print a warning if users pass in secrets as command line arguments and
mention it in the man page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The necessity to specify the secret value as command argument is
insecure. Allow reading the secret from a file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Users might want to get the raw value instead of dealing with base64
encoding. This might be useful for redirection to file and also for
simple human-readable secrets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our virsh already has 'domhostname' command. Add '--source'
argument to it so that users can chose between 'lease' and
'agent' sources. Also, implement completer for the argument.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add documentation for additional reason why snapshot-revert might need
to be forced. This explains why restoring an inactive snapshot while
there is managed saved state is refused by default.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reformat explanations of the snapshot-revert force reasons in
preparation for more to be added. This is a simple reformat without any
wording changes.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Trivially replace usages of qemu and lxc in the virsh manpage with their
more heavily used and (according to Wikipedia) correct upper-case
spellings QEMU and LXC.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Suggested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Document that --diskspec DISK,snapshot=no disables snapshot for the
given disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Some versions of the rst2man convertor are buggy failing to
cope with syntax highlighting in code blocks.
This isn't something we really need for the man page code
blocks, so we can just delete the highlighting directive.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
