Since its introduction in commit 874e65aa, if someone requests:
<os><bios useserial="yes"/><os/>
we report an error if we cannot successfully count the number
of serial devices via an XPath query.
Instead of fixing the check (and moving it to the validation phase,
to prevent existing domains from disappearing), drop it completely.
For QEMU, the number of serials is checked when building the command
line.
When security drivers are active but confinement is not enabled,
there is no need to autogenerate <seclabel> elements when starting
a domain def that contains no <seclabel> elements. In fact,
autogenerating the elements can result in needless save/restore and
migration failures when the security driver is not active on the
restore/migration target.
This patch changes the virSecurityManagerGenLabel function in
src/security_manager.c to only autogenerate a <seclabel> element
if none is already defined for the domain *and* default
confinement is enabled. Otherwise the needless <seclabel>
autogeneration is skipped.
Resolves: https://bugzilla.opensuse.org/show_bug.cgi?id=1051017
I mistakenly thought pSeries guests supported 32 PHBs,
but it turns out they only support 31. Validate the
target index accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1479647
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Validation should happen after parsing, so the proper
location for it is virDomainControllerDefValidate()
rather than virDomainControllerDefParseXML().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Use the new facility which allows to ignore failures in post parse
callbacks if they are not fatal so that VM configs are not lost if the
emulator binary is missing.
If qemuCaps can't be populated on daemon restart skip certain portions
of the post parse callbacks during config reload and re-run the callback
during VM startup.
This fixes VMs vanishing if the emulator binary was broken or
uninstalled and libvirtd was restarted.
qemuDomainControllerDefPostParse assigns the default USB controller
model when it was not specified by the user. Skip this step if @qemuCaps
is missing so that we don't fill wrong data. This will then be fixes by
re-running the post parse callback.
Report the given GIC version as unsupported if @qemuCapsi is NULL. This
will be helpful to run post parse callbacks even if qemu is not
currently installed.
If qemuCaps are not present, just return the original machine type name.
This will help in situations when qemuCaps is not available in the post
parse callback.
Some failures of the post parse callback can be tolerated. This is
specifically desired when loading the configs of existing VMs. In such
case the post parse callback should not really be modifying anything
in the definition.
This patch adds a parse flag VIR_DOMAIN_DEF_PARSE_ALLOW_POST_PARSE_FAIL
which will allow the callbacks to report non-fatal failures by returning
a positive return value. In such case the field 'postParseFailed' in the
domain definition is set to true, to notify the drivers that the
callback failed and possibly needs to be re-run.
Post parse callbacks will need to be able to signal that they failed
non-fatally. This means that we need to return the value returned by the
callback without modification.
The domain post parse callback, domain address callback and the domain
device callback (for every single device) would each grab qemuCaps for
the current emulator. This is quite wasteful. Use the new callback to do
this just once.
Some drivers use def-specific private data across callbacks (e.g.
qemuCaps in the qemu driver). Currently it's mostly allocated in every
single callback. This is rather wasteful, given that every single call
to the device callback allocates it.
The new callback will allocate the data (if not provided externally) and
then use it for the VM, address and device post parse callbacks.
Add yet another post parse callback, which is executed prior the real
one without @parseOpaque. This is meant to set basics before
@parseOpaque (in case of the qemu driver qemuCaps) can be allocated.
This callback will allow to optimize passing of custom parseOpaque
through the callbacks.
The helper returns true if a string contains any of the given chars.
virStringHasControlChars can be reimplemented using that helper.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Let this new method handle the device object we obtained from the
monitor in order to enhance readability.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
So we have a sanity check for the udev monitor fd. Theoretically, it
could happen that the udev monitor fd changes (due to our own wrongdoing,
hence the 'sanity' here) and if that happens it means we are handling an
event from a different entity than we think, thus we should remove the
handle if someone somewhere somehow hits this hypothetical case.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
It might happen that virFileResolveLinkHelper fails on the lstat system
call. virFileResolveLink expects the caller to report an error when it
fails, however this wasn't the case for udevProcessMediatedDevice.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Testing qemu-2.10-rc3 shows issues like:
qemu-system-aarch64: -drive file=/home/ubuntu/vm-start-stop/vms/
7936-0_CODE.fd,if=pflash,format=raw,unit=1: Failed to unlock byte 100
There is an apparmor deny due to qemu now locking those files:
apparmor="DENIED" operation="file_lock" [...]
name="/home/ubuntu/vm-start-stop/vms/7936-0_CODE.fd"
name="/var/lib/uvtool/libvirt/images/kvmguest-artful-normal.qcow"
[...] comm="qemu-system-aarch64" requested_mask="k" denied_mask="k"
The profile needs to allow locking for loader and nvram files via
the locking (k) rule.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Testing qemu-2.10-rc2 shows issues like:
qemu-system-x86_64: -drive file=/var/lib/uvtool/libvirt/images/kvmguest- \
artful-normal.qcow,format=qcow2,if=none,id=drive-virtio-disk0:
Failed to lock byte 100
It seems the following qemu commit changed the needs for the backing
image rules:
(qemu) commit 244a5668106297378391b768e7288eb157616f64
Author: Fam Zheng <famz@redhat.com>
file-posix: Add image locking to perm operations
The block appears as:
apparmor="DENIED" operation="file_lock" [...]
name="/var/lib/uvtool/libvirt/images/kvmguest-artful-normal.qcow"
[...] comm="qemu-system-x86" requested_mask="k" denied_mask="k"
With that qemu change in place the rules generated for the image
and backing files need the allowance to also lock (k) the files.
Disks are added via add_file_path and with this fix rules now get
that permission, but no other rules are changed, example:
- "/var/lib/uvtool/libvirt/images/kvmguest-artful-normal-a2.qcow" rw,
+ "/var/lib/uvtool/libvirt/images/kvmguest-artful-normal-a2.qcow" rwk
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
It's equivalent of calling virXPathString("string(.)", ctxt) but it
doesn't have to use the XPath resolving and parsing.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The virXMLPropStringLimit is an equivalent of virXPathStringLimit
which should be preferred if you already have a XML dom node or
if you need to parse more than one property.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Back in the day when I was implementing QoS for networks there
were no self inflating virBitmaps. Only the static ones.
Therefore, I had to allocate the whole 8KB of memory in order to
keep track of used/unused class IDs. This is rather wasteful
because nobody is ever gonna use that much classes (kernel
overhead would drastically lower the bandwidth). Anyway, now that
we have self inflating bitmaps we can start small and allocate
more if there's need for it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rename the variable, recent review requested just use of @filter,
so be consistent throughout.
NB: Also change the virNWFilterPtr to be @nwfilter to not conflict
with the renamed variable.
Use the structure names in the @data setup - makes it easier than
going back to find the struct fields to make sure the order of the
data is correct.
Signed-off-by: John Ferlan <jferlan@redhat.com>
To be consistent with the API definition, use the @maxnames instead
of @nnames when describing/comparing against the maximum names to
be provided for the *ConnectList[Defined]Networks APIs.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the virObjectRef in virNetworkObjAssignDefLocked to after
the virHashAddEntry to make it "clearer" why the @ref is being
incremented. Upon return from the ObjNew we will have 1 ref on
the object already, adding it to the hash table requires the
increment.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation to privatize the virNetworkObj - create an accessor function
to get the current @persistent value. Also change the value to a bool rather
than an unsigned int (since that's how it's generated anyway).
Signed-off-by: John Ferlan <jferlan@redhat.com>
In order to privatize the virNetworkObj create accessors in virnetworkobj
in order to handle the get/set of the active value.
Also rather than an unsigned int, convert it to a boolean to match other
drivers representation and the reality of what it is.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation for making the object private, create a couple of API's
to get the obj->def & obj->newDef and set the obj->def.
While altering networkxml2conftest.c to use the virNetworkObjSetDef
API, fix the name of the variable from @dev to @def
Signed-off-by: John Ferlan <jferlan@redhat.com>
Change the variable name to be a bit more descriptive and less confusing
when used with the data.network.actual->class_id.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation for making the object private, create/use a couple of API's
to get/set the obj->dnsmasqPid and obj->radvdPid.
NB: Since the pid's can sometimes changed based on intervening functions,
be sure to always fetch the latest value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since we can only ever have one reference to obj->macmap, rather
than only clearing obj->macmap during virNetworkObjUnrefMacMap
(e.g. virtual network from networkShutdownNetwork), let's just
unconditionally clear the obj->macmap to ensure that some future
change that created it's own reference to obj->macmap wouldn't
have that reference disappear if virNetworkObjDispose got called.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation for having a private virNetworkObj - let's create/move some
API's that handle the obj->macmap. The API's will be renamed to have a
virNetworkObj prefix to follow conventions and the arguments slightly
modified to accept what's necessary to complete their task.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move networkMacMgrFileName into src/util/virmacmap.c and rename to
virMacMapFileName. We're about to move some more MacMgr processing
files into virnetworkobj and it doesn't make sense to have this helper
in the driver or in virnetworkobj.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If an environment specific _tls_x509_cert_dir is provided, then
do not VIR_STRDUP the defaultTLSx509secretUUID as that would be
for the "default" environment and not the vnc, spice, chardev, or
migrate environments. If the environment needs a secret to decode
it's certificate, then it must provide the secret. If the secrets
happen to be the same, then configuration would use the same UUID
as the default (but we cannot assume that nor can we assume that
the secret would be necessary).
Rather than assuming that what's passed to virObject{Ref|Unref}
would be a virObjectPtr as long as it's not NULL, let's do the
similar checks virObjectIsClass in order to prevent a possible
increment or decrement to some field at the obj->u.s.refs offset.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The virObjectIsClass API has only ever checked object validity
based on if the @obj is not NULL and it was derived from some class.
While this has worked well in general, there is one additional
check that could be made prior to calling virClassIsDerivedFrom
which loops through the classes checking the magic number against
the klass expected magic number.
If by chance a non virObject is passed, rather than assuming the
void * @obj is a _virObject and thus offsetting to obj->klass,
obj->magic, and obj->parent, let's check that the void * @obj
has at least the "base part" of the magic number in the right
place and generate a more specific VIR_WARN message if not.
There are many consumers to virObjectIsClass, include the locking
primitives virObject{Lock|Unlock}, virObjectRWLock{Read|Write},
and virObjectRWUnlock. For those callers, the locking call will
not fail, but it also will not attempt a virMutex* call which
will "most likely" fail since the &obj->lock is used.
In order to avoid some possible future wrap on the 0xCAFExxxx
value, add a check during initialization that some new class
won't cause the wrap. Should be good for a few years at least!
It is still left up to the caller to handle the failed API calls
just as it would be if it passed a NULL opaque pointer anyobj.
If virObjectIsClass fails "internally" to virobject.c, create a
macro to generate the VIR_WARN describing what the problem is.
Also improve the checks and message a bit to indicate which was
the failure - whether the obj was NULL or just not the right class
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than overload virObjectUnlock as commit id '77f4593b' has
done, create a separate virObjectRWUnlock API that will force the
consumers to make the proper decision regarding unlocking the
RWLock's. Similar to the RWLockRead and RWLockWrite, use the
virObjectGetRWLockableObj helper. This restores the virObjectUnlock
code to using the virObjectGetLockableObj.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Introduce a helper to handle the error path more cleanly. The same
as virObjectGetLockableObj in order to essentially follow the original
logic of commit 'b545f65d' to ensure that the input argument at least
has some validity before using.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Now that virObjectRWLockWrite exists to handle the virObjectRWLockable
objects, let's restore virObjectLock to only handle virObjectLockable
class locks. There still exists the possibility that the input @anyobj
isn't a valid object and the resource isn't truly locked, but that
also exists before commit id '77f4593b'.
This also restores some logic that commit id '77f4593b' removed
with respect to a common code path that commit id '10c2bb2b' had
introduced as virObjectGetLockableObj. This code path merely does
the same checks as the original virObjectLock commit 'b545f65d',
but in callable/reusable helper to ensure the @obj at least has
some validity before using.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Instead of making virObjectLock be the entry point for two
different types of locks, let's create a virObjectRWLockWrite API
which will only handle the virObjectRWLockableClass objects.
Use the new virObjectRWLockWrite for the virdomainobjlist code
in order to handle the Add, Remove, Rename, and Load operations
that need to be very synchronous.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since the class it represents is based on virObjectRWLockableClass
and in order to make sure we differentiate just in case anyone somehow
believes they could use virObjectLockRead for a virObjectLockableClass,
let's rename the API to use the RW in the name. Besides the RW locks
refer to pthread_rwlock_{init|rdlock|wrlock|unlock|destroy} while the
other locks refer to pthread_mutex_{init|lock|unlock|destroy}.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The correct lock order is:
nwfilter driver lock (not used in this code path)
nwfilter update lock
virt driver lock (not used in this code path)
domain object lock
but the current code have this order:
domain object lock
nwfilter update lock
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This way later patches can add another structures with virResctrl
prefix without the meaning being even more confusing than it needs to
be.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That means that returning negative values means error and non-negative
values differ in meaning, but are all successful.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
It doesn't access anything from conf/ and ti will be needed to use
from other util/ places. This split makes the separation clearer.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit 81fb440b further qualified an if statement by adding the
boolean saveVlan to the condition. Coverity pointed out that this
change in the logic eliminated the need to check saveVlan in an
argument to virAsprintf().
Commit 9a94af6d restructured virHostdevReadNetConfig() so that it
would manually set ret = 0 after successfully reading the device's
config, but Coverity pointed out that "ret = 0" was erroneously placed
outside of an "else" clause, meaning that the the value of ret set in
the "if" clause was unnecessarily and incorrectly overwritten.
This patch moves ret = 0 into the else clause, which should silence
Coverity.
When using a VF from an SRIOV-capable network card in a guest (either
in macvtap passthrough mode, or via VFIO PCI device assignment), The
associated PF netdev must be online in order for the VF to be usable
by the guest. The guest, however, is not able to change the state of
the PF. And libvirt *could* set the PF online as needed, but that
could lead to the host receiving unexpected IPv6 traffic (since the
default for an unconfigured interface is to participate in IPv6
autoconf). For this reason, before assigning a VF to a guest, libvirt
verifies that the related PF netdev is online - if it isn't, then we
log an error and don't allow the guest startup to continue.
Until now, this check was done during virNetDevSetNetConfig(). This
works nicely because the same function is called both for macvtap
passthrough and for VFIO device assignment. But in the case of VFIO,
the VF has already been unbound from its netdev driver by the time we
get to virNetDevSetNetConfig(), and in the case of dual port Mellanox
NICs that have their VFs setup in single port mode, the *only* way to
determine the proper PF netdev to query for online status is via the
"phys_port_id" file that is in the VF netdev's sysfs directory. *BUT*
if we've unbound the VF from the netdev driver, then it doesn't *have*
a netdev sysfs directory.
So, in order to check the correct PF netdev for online status, this
patch moved the check earlier in the setup, into
virNetDevSaveNetConfig(), which is called *before* unbinding the VF
from its netdev driver.
(Note that this implies that if you are using VFIO device assignment
for the VFs of a Mellanox NIC that has the VFs programmed in single
port mode, you must let the VFs be bound to their net driver and use
"managed='yes'" in the device definition. To be more specific, this is
only true if the VFs in single port mode are using port *2* of the PF
- if the VFs are using only port 1, then the correct PF netdev will be
arrived at by default/chance))
This resolves: https://bugzilla.redhat.com/267191
virHostdevRestoreNetConfig() calls virNetDevReadNetConfig() to try and
read the "original config" of a netdev, and if that fails, it tries
again with a different directory/netdev name. This achieves the
desired effect (we end up finding the config wherever it may be), but
for each failure, virNetDevReadNetConfig() places a nice error message
in the system logs. Experience has shown that false-positive error
logs like this lead to erroneous bug reports, and can often mislead
those searching for *real* bugs.
This patch changes virNetDevReadNetConfig() to explicitly check if the
file exists before calling virFileReadAll(); if it doesn't exist,
virNetDevReadNetConfig() returns a success, but leaves all the
variables holding the results as NULL. (This makes sense if you define
the purpose of the function as "read a netdev's config from its config
file *if that file exists*).
To take advantage of that change, the caller,
virHostdevRestoreNetConfig() is modified to fail immediately if
virNetDevReadNetConfig() returns an error, and otherwise to try the
different directory/netdev name if adminMAC & vlan & MAC are all NULL
after the preceding attempt.
Mellanox ConnectX-3 dual port SRIOV NICs present a bit of a challenge
when assigning one of their VFs to a guest using VFIO device
assignment.
These NICs have only a single PCI PF device, and that single PF has
two netdevs sharing the single PCI address - one for port 1 and one
for port 2. When a VF is created it can also have 2 netdevs, or it can
be setup in "single port" mode, where the VF has only a single netdev,
and that netdev is connected either to port 1 or to port 2.
When the VF is created in dual port mode, you get/set the MAC
address/vlan tag for the port 1 VF by sending a netlink message to the
PF's port1 netdev, and you get/set the MAC address/vlan tag for the
port 2 VF by sending a netlink message to the PF's port 2 netdev. (Of
course libvirt doesn't have any way to describe MAC/vlan info for 2
ports in a single hostdev interface, so that's a bit of a moot point)
When the VF is created in single port mode, you can *set* the MAC/vlan
info by sending a netlink message to *either* PF netdev - the driver
is smart enough to understand that there's only a single netdev, and
set the MAC/vlan for that netdev. When you want to *get* it, however,
the driver is more accurate - it will return 00:00:00:00:00:00 for the
MAC if you request it from the port 1 PF netdev when the VF was
configured to be single port on port 2, or if you request if from the
port 2 PF netdev when the VF was configured to be single port on port
1.
Based on this information, when *getting* the MAC/vlan info (to save
the original setting prior to assignment), we determine the correct PF
netdev by matching phys_port_id between VF and PF.
(IMPORTANT NOTE: this implies that to do PCI device assignment of the
VFs on dual port Mellanox cards using <interface type='hostdev'>
(i.e. if you want the MAC address/vlan tag to be set), not only must
the VFs be configured in single port mode, but also the VFs *must* be
bound to the host VF net driver, and libvirt must use managed='yes')
By the time libvirt is ready to set the new MAC/vlan tag, the VF has
already been unbound from the host net driver and bound to
vfio-pci. This isn't problematic though because, as stated earlier,
when a VF is created in single port mode, commands to configure it can
be sent to either the port 1 PF netdev or the port 2 PF netdev.
When it is time to restore the original MAC/vlan tag, again the VF
will *not* be bound to a host net driver, so it won't be possible to
learn from sysfs whether to use the port 1 or port 2 PF netdev for the
netlink commands. And again, it doesn't matter which netdev you
use. However, we must keep in mind that we saved the original settings
to a file called "${PF}_${VFNUM}". To solve this problem, we just
check for the existence of ${PF1}_${VFNUM} and ${PF2}_${VFNUM}, and
use whichever one we find (since we know that only one can be there)
This patch updates functions in netdev.c to pay attention to
phys_port_id. It uses the new function virNetDevGetPhysPortID() to
learn the phys_port_id of a VF or PF, then sends that info to
virPCIGetNetName(), which has newly been modified to take an optional
phys_port_id.
A single PCI device may have multiple netdevs associated with it. Each
of those netdevs will have a different phys_port_id entry in
sysfs. This patch modifies virPCIGetNetName() to allow selecting one
of the potential many netdevs in two different ways:
1) by setting the "idx" argument, the caller can select the 1st (0),
2nd (1), etc. netdev from the PCI device's net subdirectory.
2) If the physPortID arg is set (to a null-terminated string) then
virPCIGetNetName() returns the netdev that has that phys_port_id in
the sysfs file of the same name in the netdev's directory.
On Linux each network device *can* (but not necessarily *does*) have
an attribute called phys_port_id which can be read from the file of
that name in the netdev's sysfs directory. The examples I've seen have
been a many-digit hexadecimal number (as an ASCII string).
This value can be useful when a single PCI device is associated with
multiple netdevs (e.g a dual port Mellanox SR-IOV NIC - this card has
a single PCI Physical Function (PF), and that PF has two netdevs
associated with it (the "net" subdirectory of the PF in sysfs has two
links rather than the usual single link to a netdev directory). Each
of the PF netdevs has a different phys_port_id. The Virtual Functions
(VF) are similar - the PF (a PCI device) has "n" VFs (also each of
these is a PCI device), each VF has two netdevs, and each of the VF
netdevs points back to the VF PCI device (with the "device" entry in
its sysfs directory) as well as having a phys_port_id matching the PF
netdev it is associated with.
virNetDevGetPhysPortID() simply attempts to read the phys_port_id for
the given netdev and return it to the caller. If this particular
netdev driver doesn't support phys_port_id, it returns NULL (*not* a
NULL-terminated string, but a NULL pointer) but still counts it as a
success.
https://bugzilla.redhat.com/show_bug.cgi?id=1458638
This code is so complicated because we allow enabling the same
bits at many places. Just like in this case: huge pages can be
enabled by global <hugepages/> element under <memoryBacking> or
on per <memory/> basis. To complicate things a bit more, users
are allowed to omit the page size which case the default page
size is used. And this is what is causing this bug. If no page
size is specified, @pagesize is keeping value of zero throughout
whole function. Therefore we need yet another boolean to hold
[use, don't use] information as we can't sue @pagesize for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In virDomainNetDefParseXML() the def->coalesce is parsed and
allocated by virDomainNetDefCoalesceParseXML() but in fact it's
never freed .
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1467245
Currently, there's a bug when undefining a domain with NVRAM
store. Basically, the unlink() of the NVRAM store file happens
during the undefine procedure iff domain is inactive. So, if
domain is running and undefine is called the file is left behind.
It won't be removed in the domain cleanup process either
(qemuProcessStop). One of the solutions is to remove if
regardless of the domain state and rely on qemu having the file
opened. This still has a downside that if the domain is defined
back the NVRAM store file is going to be new, any changes to the
current one are lost (just like with any other file that is
deleted while a process has it opened). But is it really a
downside?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Slight refactor of the WMI serialization code to minimize mixing
openwsman and libxml2 APIs that triggered clang alignment warnings.
The only usage of libxml2 APIs now is in creating CDATA blocks,
because the openwsman API does not provide that functionality. The
clang alignment warning in this case is silenced by casting to a
void pointer first.
The API docs for the various vir$OBJECTGetConnect functions
contain a warning
WARNING: When writing libvirt bindings in other languages, do
not use this function. Instead, store the connection and
the domain object together.
There is no reason why language bindings should not use this
method, and indeed the Perl, Python, and Go bindings all use
these methods.
This warning was originally added back in
commit 3edb4bc9fb
Author: Daniel Veillard <veillard@redhat.com>
Date: Tue Jul 24 15:32:55 2007 +0000
* libvirt.spec.in NEWS docs/* po/*: preparing release 0.3.1
* src/libvirt.c python/generator.py: some cleanup and warnings
from Richard W.M. Jones
IIUC, the rational was that these APIs do not need to be
directly exposed to the non-C language, as the language
can expose the same concept itself by storing the original
virConnectPtr object alongside the virDomainPtr. There's
no reason to mandate such an approach though - it is valid
for languages to expose this directly if that suits their
needs better.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We're storing the machine name in @priv but free it just in
qemuProcessStop, Therefore this may leak.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When parsing boot options from domain XML in
virDomainDefParseBootOptions() initenv id stored to:
def->os.initenv[i]->name
def->os.initenv[i]->value
But these are never freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds support for automatic VNC port assignment for bhyve guests.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most other top level objects have already had their limits increased
to 16384. Increase the storage pool, nwfilter & snapshot object
limits to match. For snapshots at least, we have seen hosts which
exceeded the current limit
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code only currently handles writing an x86 default -cpu
argument, and doesn't know anything about other architectures.
Let's make this explicit rather than leaving ex. qemu ppc64 to
throw an error about -cpu qemu64
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Certain XML features that aren't in the <cpu> block map to -cpu
flags on the qemu cli. If one of these is specified but the user
didn't explicitly pass an XML <cpu> model, we need to format a
default model on the command line.
The current code handles this by sprinkling this default cpu handling
among all the different flag string formatting. Instead, switch it
to do this just once.
This alters some test output slightly: the previous code would
write the default -cpu in some cases when no flags were actually
added, so the output was redundant.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
My commit 0c1d863 broke formatting of passthrough smartcard devices:
<smartcard mode='passthrough' type='spicevmc'/>
resulted in invalid XML:
<smartcard mode='passthrough'>
type='spicevmc'>
<address type='ccid' controller='0' slot='0'/>
</smartcard>
Split out chardev source formatting function into two -
one formatting the attributes and other formatting the subelements.
Reported-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Disk serial schema has extra '.+' allowed characters in comparison
with check in code. Looks like there is no reason for that as qemu
allows any character AFAIK for serial. This discrepancy is originated
in commit id '85d15b51' where the ability to add serial was added.
Alter the disk-serial test to add a disk with all the possible
characters listed as the serial value.
https://bugzilla.redhat.com/show_bug.cgi?id=1458630
Introduce virQEMUDriverConfigTLSDirResetDefaults in order to check
if the defaultTLSx509certdir was changed, then change the default
for any other *TLSx509certdir that was not set to the default default.
Introduce virQEMUDriverConfigValidate to validate the existence of
any of the *_tls_x509_cert_dir values that were uncommented/set,
incuding the default.
Update the qemu.conf description for default to describe the consequences
if the default directory path does not exist.
Signed-off-by: John Ferlan <jferlan@redhat.com>
After an OOM error, virBuffer* APIs set buf->use to zero.
Adding a buffer to the parent buffer only if use is non-zero
would quietly drop data on error.
Check the error beforehand to make sure buf->use is zero
because we have not attempted to add anything to it.
Convert virDomainSmartcardDefFormat to use a separate buffer
for possible subelements, to avoid the need for duplicated
formatting logic in virDomainDeviceInfoNeedsFormat.
This function has grown to format more than just the address.
Delete the comment completely to avoid failing to update it
in the future.
Also, the indentation is now handled by the virBuffer APIs,
so the comment about indentation no longer makes sense.
This function returns false if virDomainDeviceInfoFormat
would not format anything.
Using it as the sole condition to decide whether to call
virDomainDeviceInfoFormat or not is pointless, since
the conditions are repeated in virDomainDeviceInfoFormat.
Not every platform is guaranteed to have dlopen/dlsym, so we should
conditionalize its use. Suprisingly it is actually present for Win32
via the mingw-dlfcn add on, but we should still conditionalize it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
These functions were made exportable back in 3aa3e072 when I was
splitting network code into parsing and list management parts.
Since then the split is finished now and these two functions do
not need to be exported anymore.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This member allows us to store a pointer to some private data.
However, the comment says it's used in both domain driver and
network driver. Well, it is not. It's just one pointer and domain
driver uses it directly. Network driver has a global driver
variable. Update the comment to not confuse others.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since the introduction of shmem, there was a split of preparation code
from the formatting code from qemuBuildCommandLine() into
qemuProcessPrepareDomain(). Let's fix shmem in this regard, so that
we can slowly get to a cleaner codebase.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
So there are couple of issues here. Firstly, we never unref the
@pendingReply and thus it leaks.
==13279== 144 (72 direct, 72 indirect) bytes in 1 blocks are definitely lost in loss record 1,095 of 1,259
==13279== at 0x4C2E080: calloc (vg_replace_malloc.c:711)
==13279== by 0x781FA97: _dbus_pending_call_new_unlocked (in /usr/lib64/libdbus-1.so.3.14.11)
==13279== by 0x7812A4C: dbus_connection_send_with_reply (in /usr/lib64/libdbus-1.so.3.14.11)
==13279== by 0x56BEDF3: virNetDaemonCallInhibit (virnetdaemon.c:514)
==13279== by 0x56BEF18: virNetDaemonAddShutdownInhibition (virnetdaemon.c:536)
==13279== by 0x12473B: daemonInhibitCallback (libvirtd.c:742)
==13279== by 0x1249BD: daemonRunStateInit (libvirtd.c:823)
==13279== by 0x554FBCF: virThreadHelper (virthread.c:206)
==13279== by 0x8F913D3: start_thread (in /lib64/libpthread-2.23.so)
==13279== by 0x928DE3C: clone (in /lib64/libc-2.23.so)
Secondly, while we send the message, we are suspended ('cos we're
talking to a UNIX socket). However, until we are resumed back
again the reply might have came therefore subsequent
dbus_pending_call_set_notify() has no effect and in fact the
virNetDaemonGotInhibitReply() callback is never called. Thirdly,
the dbus_connection_send_with_reply() has really stupid policy
for return values. To cite the man page:
Returns
FALSE if no memory, TRUE otherwise.
Yes, that's right. If anything goes wrong and it's not case of
OOM then TRUE is returned, i.e. you're trying to pass FDs and
it's not supported, or you're not connected, or anything else.
Therefore, checking for return value of
dbus_connection_send_with_reply() is not enoguh. We also have to
check if @pendingReply is not NULL before proceeding any further.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We are given a string in @machinename, we never allocate it, just
merely use it for reading. We should not free it otherwise it
leads to double free:
==32191== Thread 17:
==32191== Invalid free() / delete / delete[] / realloc()
==32191== at 0x4C2D1A0: free (vg_replace_malloc.c:530)
==32191== by 0x54BBB84: virFree (viralloc.c:582)
==32191== by 0x2BC04499: qemuProcessStop (qemu_process.c:6313)
==32191== by 0x2BC500FF: processMonitorEOFEvent (qemu_driver.c:4724)
==32191== by 0x2BC502FC: qemuProcessEventHandler (qemu_driver.c:4769)
==32191== by 0x5550640: virThreadPoolWorker (virthreadpool.c:167)
==32191== by 0x554FBCF: virThreadHelper (virthread.c:206)
==32191== by 0x8F913D3: start_thread (in /lib64/libpthread-2.23.so)
==32191== by 0x928DE3C: clone (in /lib64/libc-2.23.so)
==32191== Address 0x31893d70 is 0 bytes inside a block of size 1,100 free'd
==32191== at 0x4C2D1A0: free (vg_replace_malloc.c:530)
==32191== by 0x54BBB84: virFree (viralloc.c:582)
==32191== by 0x54C1936: virCgroupValidateMachineGroup (vircgroup.c:343)
==32191== by 0x54C4B29: virCgroupNewDetectMachine (vircgroup.c:1550)
==32191== by 0x2BBDDA29: qemuConnectCgroup (qemu_cgroup.c:972)
==32191== by 0x2BC05DA7: qemuProcessReconnect (qemu_process.c:6822)
==32191== by 0x554FBCF: virThreadHelper (virthread.c:206)
==32191== by 0x8F913D3: start_thread (in /lib64/libpthread-2.23.so)
==32191== by 0x928DE3C: clone (in /lib64/libc-2.23.so)
==32191== Block was alloc'd at
==32191== at 0x4C2BE80: malloc (vg_replace_malloc.c:298)
==32191== by 0x4C2E35F: realloc (vg_replace_malloc.c:785)
==32191== by 0x54BB492: virReallocN (viralloc.c:245)
==32191== by 0x54BEDF2: virBufferGrow (virbuffer.c:150)
==32191== by 0x54BF3B9: virBufferVasprintf (virbuffer.c:408)
==32191== by 0x54BF324: virBufferAsprintf (virbuffer.c:381)
==32191== by 0x55BB271: virDomainGenerateMachineName (domain_conf.c:27078)
==32191== by 0x2BBD5B8F: qemuDomainGetMachineName (qemu_domain.c:9595)
==32191== by 0x2BBDD9B4: qemuConnectCgroup (qemu_cgroup.c:966)
==32191== by 0x2BC05DA7: qemuProcessReconnect (qemu_process.c:6822)
==32191== by 0x554FBCF: virThreadHelper (virthread.c:206)
==32191== by 0x8F913D3: start_thread (in /lib64/libpthread-2.23.so)
Moreover, make the @machinename 'const char *' to mark it
explicitly that we are not changing the passed string.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit @4cb719b2dc moved the driver locks around since these have become
unnecessary at spots where the code handles now self-lockable object
list, but missed the possible double unlock if udevEnumerateDevices
fails, because at that point the driver lock had been already dropped.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In commit 5e515b542d I've attempted to fix the inability to access
storage from the apparmor helper program by linking with the storage
driver. By linking with the .so the linker complains that it's not
portable. Fix this by loading the module dynamically as we are supposed
to do.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Driver modules proved to be reliable for a long time. Since support for
not building modules complicates the code and makefiles drop it.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
If a domain name contains a '=' and the unix socket path is
auto-generated or socket path provided by user contains '=' QEMU
is unable to properly parse the command line. In order to make it
work we need to use the new command line syntax for VNC if it's
available, otherwise we can use the old syntax.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1352529
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Remove the complex and unreliable code which inferred the node name
hierarchy only from data returned by 'query-named-block-nodes'. It turns
out that query-blockstats contain the full hierarchy of nodes as
perceived by qemu so the inference code is not necessary.
In query blockstats, the 'parent' object corresponds to the storage
behind a storage volume and 'backing' corresponds to the lower level of
backing chain. Since all have node names this data can be really easily
used to detect node names.
In addition to the code refactoring the one remaining test case needed
to be fixed along.
Reviewed-by: Eric Blake <eblake@redhat.com>
The same operation will become useful in other places so rename the
function to be more generic and move it to the top so that it can be
reused earlier in the file.
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow getting the raw data from query-blockstats, so that we can use it
to detect the backing chain later on.
Reviewed-by: Eric Blake <eblake@redhat.com>
Disallow providing the wwnn/wwpn of the HBA in the adapter XML:
<adapter type='fc_host' [parent='scsi_hostN'] wwnn='HBA_wwnn'
wwpn='HBA_wwpn'/>
This should be considered a configuration error since a vHBA
would not be created. In order to use the HBA as the backing the
following XML should be used:
<adapter type='scsi_host' name='scsi_hostN'/>
So add a check prior to the checkParent call to validate that
the provided wwnn/wwpn resolves to a vHBA and not an HBA.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since commit 2e6ecba1bc, the pointer to the qemu driver is saved in
domain object's private data and hence does not have to be passed as
yet another parameter if domain object is already one of them.
This is a first (example) patch of this kind of clean up, others will
hopefully follow.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The switch contains considerable amount of changes:
virQEMUCapsRememberCached() is removed because this is now handled
by virFileCacheSave().
virQEMUCapsInitCached() is removed because this is now handled by
virFileCacheLoad().
virQEMUCapsNewForBinary() is split into two functions,
virQEMUCapsNewData() which creates new data if there is nothing
cached and virQEMUCapsLoadFile() which loads the cached data.
This is now handled by virFileCacheNewData().
virQEMUCapsCacheValidate() is removed because this is now handled by
virFileCacheValidate().
virQEMUCapsCacheFree() is removed because it's no longer required.
Add virCapsPtr into virQEMUCapsCachePriv because for each call of
virFileCacheLookup*() we need to use current virCapsPtr.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This is a preparation for following patches where we switch to
virFileCache for QEMU capabilities cache
The host arch will always remain the same but virCaps may change. Now
the host arch is stored while creating new qemu capabilities cache.
It removes the need to pass virCaps into virQEMUCapsCache*() functions.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This will store private data that will be used by following patches
when switching to virFileCache.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The new virFileCache will nicely handle the caching logic for any data
that we would like to cache. For each type of data we will just need
to implement few handlers that will take care of creating, validating,
loading and saving the cached data.
The cached data must be an instance of virObject.
Currently we cache QEMU capabilities which will start using
virFileCache.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
It's possible to have more than one unnamed virtio-serial unix channel.
We need to generate a unique name for each channel. Currently, we use
".../unknown.sock" for all of them. Better practice would be to specify
an explicit target path name; however, in the absence of that, we need
uniqueness in the names we generate internally.
Before the changes we'd get /var/lib/libvirt/qemu/channel/target/unknown.sock
for each instance of
<channel type='unix'>
<source mode='bind'/>
<target type='virtio'/>
</channel>
Now, we get vioser-00-00-01.sock, vioser-00-00-02.sock, etc.
Signed-off-by: Scott Garfinkle <seg@us.ibm.com>
It is more related to a domain as we might use it even when there is
no systemd and it does not use any dbus/systemd functions. In order
not to use code from conf/ in util/ pass machineName in cgroups code
as a parameter. That also fixes a leak of machineName in the lxc
driver and cleans up and de-duplicates some code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This way the function can work as a central point of clean-up code and
we don't have to duplicate code. And it works similarly to the qemu
driver.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Rather than rely on virSecretObjEndAPI to make the final virObjectUnref
after the call to virSecretObjListRemove, be more explicit by calling
virObjectUnref and setting @obj to NULL for secretUndefine and in
the error path of secretDefineXML. Calling EndAPI will end up calling
Unlock on an already unlocked object which has indeteriminate results
(usually an ignored error).
The virSecretObjEndAPI will both Unref and Unlock the object; however,
the virSecretObjListRemove would have already Unlock'd the object so
calling Unlock again is incorrect. Once the virSecretObjListRemove
is called all that's left is to Unref our interest since that's the
corrollary to the virSecretObjListAdd which returned our ref interest
plus references for each hash table in which the object resides. In math
terms, after an Add there's 2 refs on the object (1 for the object and
1 for the list). After calling Remove there's just 1 ref on the object.
For the Add callers, calling EndAPI removes the ref for the object and
unlocks it, but since it's in a list the other 1 remains.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the virSecretLoadValue fails, the code jumped to cleanup without
setting @ret = obj, thus calling virSecretObjListRemove which only
accounts for the object reference related to adding the object to
the list during virSecretObjListAdd, but does not account for the
reference to the object itself as the return of @ret would be NULL
so the caller wouldn't call virSecretObjEndAPI on the object recently
added thus reducing the refcnt to zero.
This patch will perform the ObjListRemove in the failure path of
virSecretLoadValue and Unref @obj in order to perform clean up
and return @obj as NULL. The @def will be freed as part of the
virObjectUnref.
Since the virSecretObjListAdd technically consumes @def on success,
the secretDefineXML should set @def = NULL immediately and process
the remaining calls using a new @objDef variable. We can use use
VIR_STEAL_PTR since we know the Add function just stores @def in
obj->def.
Because we steal @def into @objDef, if we jump to restore_backup:
and @backup is set, then we need to ensure the @def would be
free'd properly, so we'll steal it back from @objDef. For the other
condition this fixes a double free of @def if the code had jumped to
@backup == NULL thus calling virSecretObjListRemove without setting
@def = NULL. In this case, the subsequent call to DefFree would
succeed and free @def; however, the call to EndAPI would also
call DefFree because the Unref done would be the last one for
the @obj meaning the obj->def would be used to call DefFree,
but it's already been free'd because @def wasn't managed right
within this error path.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than assign to a local variable, let's just assign directly to the
object using the error path for cleanup.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This reverts commit 328bd24443.
As it turns out, this is not portable and very Linux & glibc
specific. Worse, this may lead to not starving writers on Linux
but everywhere else. Revert this and if the starvation occurs
resolve it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
The original name didn't hint at the fact that PHBs are
a pSeries-specific concept.
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Recent commits made it so that pci-root controllers for
pSeries guests are automatically assigned the
spapr-pci-host-bridge model name; however, that prevents
guests to migrate to older versions of libvirt which don't
know about that model name at all, which at the moment is
all of them :)
To avoid the issue, just strip the model name from PHBs
when formatting the migratable XML; guests that use more
than one PHB are not going to be migratable anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1458708
If the parent provided for the storage pool adapter is not vHBA
capable, then issue a configuration error even though the provided
wwnn/wwpn were found.
It is a configuration error to provide a mismatched parent to
the wwnn/wwpn. The @parent is optional and is used as a means to
perform duplicate pool source checks.
https://bugzilla.redhat.com/show_bug.cgi?id=1472277
Commit id '106930aaa' altered the order of checking for an existing
vHBA (e.g something created via nodedev-create functionality outside
of the storage pool logic) which inadvertantly broke the code to
decide whether to alter/force the fchost->managed field to be 'yes'
because the storage pool will be managing the created vHBA in order
to ensure when the storage pool is destroyed that the vHBA is also
destroyed.
This patch moves the check (and checkParent helper) for an existing
vHBA back into the createVport in storage_backend_scsi. It also
adjusts the checkParent logic to more closely follow the intentions
prior to commit id '79ab0935'. The changes made by commit id '08c0ea16f'
are only necessary to run the virStoragePoolFCRefreshThread when
a vHBA was really created because there's a timing lag such that
the refreshPool call made after a startPool from storagePoolCreate*
wouldn't necessarily find LUNs, but the thread would. For an already
existing vHBA, using the thread is unnecessary since the vHBA already
exists and the lag to configure the LUNs wouldn't exist.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since virnodedeviceobj now has a self-lockable hash table, there's no
need to lock the table from the driver for processing. Thus remove the
locks from the driver for NodeDeviceObjList mgmt.
This includes the test driver as well.
Rather than use a forward linked list of elements, it'll be much more
efficient to use a hash table to reference the elements by unique name
and to perform hash searches.
This patch does all the heavy lifting of converting the list object to
use a self locking list that contains the hash table. Each of the FindBy
functions that do not involve finding the object by it's key (name) is
converted to use virHashSearch in order to find the specific object.
When searching for the key (name), it's possible to use virHashLookup.
For any of the list perusal functions that are required to evaluate
each object, the virHashForEach function is used.
Alter the node device deletion logic to make use of the parent field
from the obj->def rather than call virNodeDeviceObjListGetParentHost.
As it turns out the saved @def won't have parent_wwnn/wwpn or
parent_fabric_wwn, so the only logical path would be to call
virNodeDeviceObjListGetParentHostByParent which we can accomplish
directly via virNodeDeviceObjListFindByName.
There is no reason why two threads trying to look up two domains
should mutually exclude each other. Utilize new
virObjectRWLockable that was just introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Up until now we only had virObjectLockable which uses mutexes for
mutually excluding each other in critical section. Well, this is
not enough. Future work will require RW locks so we might as well
have virObjectRWLockable which is introduced here.
Moreover, polymorphism is introduced to our code for the first
time. Yay! More specifically, virObjectLock will grab a write
lock, virObjectLockRead will grab a read lock then (what a
surprise right?). This has great advantage that an object can be
made derived from virObjectRWLockable in a single line and still
continue functioning properly (mutexes can be viewed as grabbing
write locks only). Then just those critical sections that can
grab a read lock need fixing. Therefore the resulting change is
going to be way smaller.
In order to avoid writer starvation, the object initializes RW
lock that prefers writers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We already have virRWLockInit. But this uses pthread defaults
which prefer reader to initialize the RW lock. This may lead to
writer starvation. Therefore we need to have the counterpart that
prefers writers. Now, according to the
pthread_rwlockattr_setkind_np() man page setting
PTHREAD_RWLOCK_PREFER_WRITER_NP attribute is no-op. Therefore we
need to use PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP
attribute. So much for good enum value names.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It was observed while adding new property that there should be a space
before closing a curly brace in intel-iommu object property definition.
Fixing it as a separate patch.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Currently, @port is type of string. Well, that's overkill and
waste of memory. Port is always an integer. Use it as such.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Split out parsing of one host into a separate function and add a new
function to loop through all the host XML nodes.
This change removes multiple levels of nesting due to the old XML
parsing approach used.
So the way we format this huge virQEMUCaps enum is we group the
values in groups of five. And then at the beginning of each group
we have a small comment that says what's the number of the first
item in the group. Well, the last commit of 11b2ebf3e1 does not
follow this formatting.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Alter the virStoragePoolObjNumOfVolumes, virStoragePoolObjVolumeGetNames,
and virStoragePoolObjVolumeListExport APIs to take a virStoragePoolObjPtr
instead of the &obj->volumes and obj->def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
A virStoragePoolObjPtr will be an 'obj'.
A virStoragePoolPtr will be a 'pool'.
A virStorageVolPtr will be a 'vol'.
A virStorageVolDefPtr will be a 'voldef'.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than have repetitive code - create/use a couple of helpers:
testStoragePoolObjFindActiveByName
testStoragePoolObjFindInactiveByName
This will also allow for the reduction of some cleanup path logic.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rework some of the test driver API's to remove the need to return
failure when testStoragePoolObjFindByName returns NULL rather than
going to cleanup. This removes the need for check for "if (obj)" and in
some instances the need to for a cleanup label and a local ret variable.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add a path for UEFI VMs for AArch32 VMs, based on the path Debian is using.
libvirt is the de facto canonical location for defining where distros
should place these firmware images, so let's define this path here to try
and minimize distro fragmentation.
The call to qemuBuildDeviceAddressStr() happens no matter
what, so we can move it to the outer possible scope inside
the function.
We can also move the call to virBufferAsprintf() after all
the checks have been performed, where it makes more sense.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The virDomainDeviceInfo struct is defined in device_conf,
so generic functions that operate on it should also be
defined there rather than in domain_conf.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This patch addresses the same aspects on PPC the bug 1103314 addressed
on x86.
PCI expander bus creates multiple primary PCI busses, where each of these
busses can be assigned a specific NUMA affinity, which, on x86 is
advertised through ACPI on a per-bus basis.
For SPAPR, a PHB's NUMA affinities are assigned on a per-PHB basis, and
there is no mechanism for advertising NUMA affinities to a guest on a
per-bus basis. So, even if qemu-ppc manages to get some sort of multi-bus
topology working using PXB, there is no way to expose the affinities
of these busses to the guest. It can only be exposed on a per-PHB/per-domain
basis.
So patch enables NUMA node tag in pci-root controller on PPC.
The way to set the NUMA node is through the numa_node option of
spapr-pci-host-bridge device. However for the implicit PHB, the only way
to set the numa_node is from the -global option. The -global option applies
to all the PHBs unless explicitly specified with the option on the
respective PHB of CLI. The default PHB has the emulated devices only, so
the patch prevents setting the NUMA node for the default PHB.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The patch adds a capability for spapr-pci-host-bridge.numa_node.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Instead of going through two completely different code paths,
one of which repeats the same hardcoded bit of information
three times in rapid succession, depending on whether or not
a firmware list has been provided at configure time, just
provide a reasonable default value and remove the extra code.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
'numad' may return a nodeset which contains NUMA nodes without memory
for certain configurations. Since cgroups code will not be happy using
nodes without memory we need to store only numa nodes with memory in
autoNodeset.
On the other hand autoCpuset should contain cpus also for nodes which
do not have any memory.
A new function virNetDevOpenvswitchUpdateVlan has been created to instruct
OVS of the changes. qemuDomainChangeNet has been modified to handle the
update of the VLAN configuration for a running guest and rely on
virNetDevOpenvswitchUpdateVlan to do the actual update if needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Preparation for switching to virFileCache where there are two callbacks,
one to get a new data and second one to load a cached data.
This also removes virQEMUCapsReset which is no longer required.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
It's not required and following patches will change the code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Cleanups the code a little bit and reduces amount of arguments passed
throughout the functions.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
While searching for an element using a function it may be
desirable to know the element key for future operation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
At present shared disks can be migrated with either readonly or cache=none. But
cache=directsync should be safe for migration, because both cache=directsync and cache=none
don't use the host page cache, and cache=direct write through qemu block layer cache.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Reviewed-by: Wang Yechao <wang.yechao255@zte.com.cn>
Use virStorageSource accessors to check the file and call
virStorageFileAccess before even attempting to stat the target. This
will be helpful once we try to add network destinations for block copy,
since there will be no need to stat them.
When copying to a block device, the block device will already exist. To
allow users using a block device without any preparation, they need to
use the block copy without VIR_DOMAIN_BLOCK_COPY_REUSE_EXT.
This means that if the target is an existing block device we don't need
to prepare it, but we can't reject it as being existing.
To avoid breaking this feature, explicitly assume that existing block
devices will be reused even without that flag explicitly specified,
while skipping attempts to create it.
qemuMonitorDriveMirror still needs to honor the flag as specified by the
user, since qemu overwrites the metadata otherwise.
The refactor to split up storage driver into modules broke the apparmor
helper program, since that did not initialize the storage driver
properly and thus detection of the backing chain could not work.
Register the storage driver backends explicitly. Unfortunately it's now
necessary to link with the full storage driver to satisfy dependencies
of the loadable modules.
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The purpose of this function is to tell if the current position
in given FD is in data section or a hole and how much bytes there
is remaining until the end of the section. This is achieved by
couple of lseeks(). The most important part is that we reposition
the FD back, so that the position is unchanged from the caller
POV. And until now the final lseek() back to the original
position was done with no check for errors. And I was convinced
that that's okay since nothing can go wrong. However, review
feedback from a related series persuaded me, that it's better to
be safe than sorry. Therefore, lets check if the final lseek()
succeeded and if it doesn't report an error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
All the pieces are now in place, so we can finally start
using isolation groups to achieve our initial goal, which is
separating hostdevs from emulated PCI devices while keeping
hostdevs that belong to the same host IOMMU group together.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1280542
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
These rules will make it possible for libvirt to
automatically assign PCI addresses in a way that
respects any isolation constraints devices might
have.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Isolation groups will eventually allow us to make sure certain
devices, eg. PCI hostdevs, are assigned to guest PCI buses in
a way that guarantees improved isolation, error detection and
recovery for machine types and hypervisors that support it,
eg. pSeries guest on QEMU.
This patch merely defines storage for the new information
we're going to need later on and makes sure it is passed from
the hypervisor driver (QEMU / bhyve) down to the generic PCI
address allocation code.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Now that we have a bit more control, let's convert our object into
a lockable object and let that magic handle the create and lock/unlock.
This also involves creating a virNodeDeviceEndAPI in order to handle
the object cleanup for API's that use the Add or Find API's in order
to get a locked/reffed object. The EndAPI will unlock and unref the
object returning NULL to indicate to the caller to not use the obj.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the structures to withing virnodedeviceobj.c
Move the typedefs from node_device_conf to virnodedeviceobj.h
Signed-off-by: John Ferlan <jferlan@redhat.com>
In an overall effort to privatize access to virNodeDeviceObj and
virNodeDeviceObjList into the virnodedeviceobj module, move the
object list parsing from node_device_driver and replace with a
call to a virnodedeviceobj helper. This follows other similar
APIs/helpers which peruse the object list looking for some specific
data in order to get/return an @device (virNodeDevice) object to
the caller.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We're about to move the call to nodeDeviceSysfsGetSCSIHostCaps from
node_device_driver into virnodedeviceobj, so move the guts of the code
from the driver specific node_device_linux_sysfs into its own API
since virnodedeviceobj cannot callback into the driver.
Nothing in the code deals with sysfs anyway, as that's hidden by the
various virSCSIHost* and virVHBA* utility function calls.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Create local @obj and @def for the API's rather than referencing the
devs->objs[i][->def->]. It'll make future patches easier to read.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Ensure that any function that walks the node device object list is prefixed
by virNodeDeviceObjList.
Also, modify the @filter param name for virNodeDeviceObjListExport to
be @aclfilter.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation to make things private, make the ->devs be pointers to a
virNodeDeviceObjList and then manage everything inside virnodedeviceobj
Signed-off-by: John Ferlan <jferlan@redhat.com>
Create an allocator for the virNodeDeviceObjPtr - include setting up
the mutex, saving the virNodeDeviceDefPtr, and locking the return object.
Signed-off-by: John Ferlan <jferlan@redhat.com>
- In testDestroyVport rather than use a cleanup label, just return -1
immediately since nothing else is needed.
- In testStoragePoolDestroy, if !privpool, then just return -1 since
nothing else will happen anyway.
- Rather than "goto cleanup;" on failure to virNodeDeviceObjFindByName
an @obj, just return directly. This then allows the cleanup: label code
to not have to check "if (obj)" before calling virNodeDeviceObjUnlock.
This also simplifies some exit logic...
- In testNodeDeviceObjFindByName use an error: label to handle the failure
and don't do the ncaps++ within the VIR_STRDUP() source target index.
Only increment ncaps after success. Easier on eyes at error label too.
- In testNodeDeviceDestroy use "cleanup" rather than "out" for the goto
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than passing the object to be removed by reference, pass by value
and then let the caller decide whether or not the object should be free'd
and how to handle the logic afterwards. This includes free'ing the object
and/or setting the local variable to NULL to prevent subsequent unexpected
usage (via something like virNodeDeviceObjRemove in testNodeDeviceDestroy).
For now this function will just handle the remove of the object from the
list for which it was placed during virNodeDeviceObjAssignDef.
This essentially reverts logic from commit id '61148074' that free'd the
device entry on list, set *dev = NULL and returned. Thus fixing a bug in
node_device_hal.c/dev_refresh() which would never call dev_create(udi)
since @dev would have been set to NULL.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Recent refactors made it so that the function may use uninitialized
pointer, but it actually wanted to use a different variable and value
at all.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This reverts commit b3e71a8830.
As it turns out this ends up very badly as the @def could be Free'd
even though it's owned by @obj as a result of the AssignDef.
New API will be virNWFilterInstantiateFilterInternal as it's called from
the virNWFilterInstantiateFilter and virNWFilterUpdateInstantiateFilter.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rename to virNWFilterDoInstantiate to better describe the action.
Also fix the @vmuuid parameter to not have the ATTRIBUTE_UNUSED since it
is used in the call to virNWFilterDHCPSnoopReq.
Signed-off-by: John Ferlan <jferlan@redhat.com>
When looking for slots suitable for a PCI device, libvirt
might need to add an extra PCI controller: for pSeries guests,
we want that extra controller to be a PHB (pci-root) rather
than a PCI bridge.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
