A future patch is going to wire up qemu active block commit jobs;
but as they have similar events and are canceled/pivoted in the
same way as block copy jobs, it is easiest to track all bookkeeping
for the commit job by reusing the <mirror> element. This patch
adds domain XML to track which job was responsible for creating a
mirroring situation, and adds a job='copy' attribute to all
existing uses of <mirror>. Along the way, it also massages the
qemu monitor backend to read the new field in order to generate
the correct type of libvirt job (even though it requires a
future patch to actually cause a qemu event that can be reported
as an active commit). It also prepares to update persistent XML
to match changes made to live XML when a copy completes.
* docs/schemas/domaincommon.rng: Enhance schema.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (_virDomainDiskDef): Add a field.
* src/conf/domain_conf.c (virDomainBlockJobType): String conversion.
(virDomainDiskDefParseXML): Parse job type.
(virDomainDiskDefFormat): Output job type.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Distinguish
active from regular commit.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set job type.
(qemuDomainBlockPivot, qemuDomainBlockJobImpl): Clean up job type
on completion.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml:
Update tests.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-active-commit.xml: New
file.
* tests/qemuxml2xmltest.c (mymain): Drive new test.
Signed-off-by: Eric Blake <eblake@redhat.com>
If all features are set to default (including the capabilities policy),
but some capabilities are toggled, we need to output the <features>
element when formatting the config.
We were not directly saving the domain XML to file after starting
or finishing a blockcopy. Without the startup write, a libvirtd
restart in the middle of a copy job would forget that the job was
underway. Then at pivot, we were indirectly writing new XML in
reaction to events that occur as we stop and restart the guest CPUs.
But there was a race: since pivot is an async action, it is possible
that libvirtd is restarted before the pivot completes, so if XML
changes during the event, that change was not written. The original
blockcopy code cleared out the <mirror> element prior to restarting
the CPUs, but this is also a race, observed if a user does an async
pivot and a dumpxml before the event occurs. Furthermore, this race
will interfere with active commit in a future patch, because that
code will rely on the <mirror> element at the time of the qemu event
to determine whether to inform the user of a normal commit or an
active commit.
Fix things by saving state any time we modify live XML, while
delaying XML disk modifications until after the event completes. We
still need a to teach libvirtd restarts to examine all existing
<mirror> elements to see if the job completed in the meantime (that
is, if libvirtd misses the event, the updated state still needs to be
updated in live XML), but that will be a later patch, in part because
we also need to to start taking advantage of newer qemu's ability to
keep the job around after completion rather than the current usage
where the job disappears both on error and on success.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Track XML change
on disk.
(qemuDomainBlockJobImpl, qemuDomainBlockPivot): Move job-end XML
rewrites...
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): ...here.
Signed-off-by: Eric Blake <eblake@redhat.com>
Doing a blockcopy operation across a libvirtd restart is not very
robust at the moment. In particular, we are clearing the <mirror>
element prior to telling qemu to finish the job. Also, thanks to the
ability to request async completion, the user can easily regain
control prior to qemu actually finishing the effort, and they should
be able to poll the domain XML to see if the job is still going.
A future patch will fix things to actually wait until qemu is done
before modifying the XML to reflect the job completion. But since
qemu issues identical BLOCK_JOB_COMPLETE events regardless of whether
the job was cancelled (kept the original disk) or completed (pivoted
to the new disk), we have to track which of the two operations were
used to end the job. Furthermore, we'd like to avoid attempts to
end a job where we are already waiting on an earlier request to qemu
to end the job. Likewise, if we miss the qemu event (perhaps because
it arrived during a libvirtd restart), we still need enough state
recorded to be able to determine how to modify the domain XML once
we reconnect to qemu and manually learn whether the job still exists.
Although this patch doesn't actually fix the problem, it is a
preliminary step that makes it possible to track whether a job
has already begun steps towards completion.
* src/conf/domain_conf.h (virDomainDiskMirrorState): New enum.
(_virDomainDiskDef): Convert bool mirroring to new enum.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Handle new values.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Adjust
client.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
* docs/schemas/domaincommon.rng (diskMirror): Expose new values.
* docs/formatdomain.html.in (elementsDisks): Document it.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
If PCI passthrough type is not supported, we should error out rather than
continue building the command line.
When starting a domain, the type has been already checked by
qemuPrepareHostdevPCICheckSupport() before building qemu command line,
so the problem doesn't emerge.
But when coverting a domain xml without specifying passthrough type explictly
to qemu arg, we will get a malformed command line.
the xml:
<hostdev mode='subsystem' type='pci' managed='yes'>
<source>
<address domain='0x0001' bus='0x03' slot='0x00' function='0x0'/>
</source>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</hostdev>
the converted command line:
-device ,host=0001:03:00.0,id=hostdev0,bus=pci.0,addr=0x5
After this patch, virsh gives an error message:
virsh domxml-to-native qemu-argv /tmp/tmp.xml
error: internal error: invalid PCI passthrough type 'default'
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Use better detection of hugetlbfs mount points. Yes, there can be
multiple mount points each serving different huge page size.
Since we already have ability to override the mount point in the
qemu.conf file, this crazy backward compatibility code is brought in.
Now we allow multiple mount points, so the "hugetlbfs_mount" option
must take an list of strings (mount points). But previously, it was
just a string, so we must accept both types now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This should iterate over mount tab and search for hugetlbfs among with
looking for the default value of huge pages.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use correct mode when pre-creating files (for snapshots). The refactor
changing to storage driver usage caused a regression as some systems
created the file with 000 permissions forbidding qemu to write the file.
Pass mode to the creating functions to avoid the problem.
Regression since 185e07a5f8.
Leak introduced in commit 16ebf10f (v1.2.6), detected by valgrind:
==9816== 216 (96 direct, 120 indirect) bytes in 6 blocks are definitely lost in loss record 665 of 821
==9816== at 0x4A081D4: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==9816== by 0x50836FB: virAlloc (viralloc.c:144)
==9816== by 0x1DBDBE27: udevProcessPCI (node_device_udev.c:546)
==9816== by 0x1DBDD79D: udevGetDeviceDetails (node_device_udev.c:1293)
* src/util/virpci.h (virPCIEDeviceInfoFree): New prototype.
* src/util/virpci.c (virPCIEDeviceInfoFree): New function.
* src/conf/node_device_conf.c (virNodeDevCapsDefFree): Clear
pci_express under pci case.
(virNodeDevCapPCIDevParseXML): Avoid leak.
* src/node_device/node_device_udev.c (udevProcessPCI): Likewise.
* src/libvirt_private.syms (virpci.h): Export it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Finding virPCIE* code is more intuitive if located in virpci.h
instead of node_device_conf.h.
* src/conf/node_device_conf.h (virPCIELinkSpeed, virPCIELink)
(virPCIEDeviceInfo): Move...
* src/util/virpci.h: ...here.
* src/conf/node_device_conf.c (virPCIELinkSpeed): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The compiler can alert us to places where we need to expand switch
statements because we add a new enum value, but only if we don't
have a default case.
* src/conf/node_device_conf.c (virNodeDeviceDefFormat)
(virNodeDevCapsDefParseXML, virNodeDevCapsDefFree): Drop default
case.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit e5f36698e3 introduces a
false-positive build failure in the sound card model handling switch.
Initialize the model to NULL although the value should never be used.
Libvirt documents that the default entropy source for the 'random'
backend of a RNG device is /dev/random. Instead of storing and
propagating NULL across our code and checking it in multiple places fill
the default in the post parse callback and use that in the other places.
Since 24e5cafba6 (thankfully unreleased)
when a VM with an empty disk drive would be started the code would call
stat() on NULL path as a check was missing from the callback rendering
machines unstartable.
Report success when the path is empty (denoting an empty drive).
virTimeFieldsThenRaw will never return negative result, so I clean up
the related meaningless judgements to make it better.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The "random" backend for virtio-rng can be started with no path
specified which equals to /dev/random. The cgroup code didn't consider
this and called few of the functions with NULL resulting into:
$ virsh start rng-vm
error: Failed to start domain rng-vm
error: Path '(null)' is not accessible: Bad address
Problem introduced by commit c6320d3463
If user hasn't provided any @emulatorbin, the qemuCaps are
searched by @arch provided (which in fact can be guessed from the
host). However, there's no guarantee that the qemu binary for
@arch will exist. Therefore qemu capabilities may be nonexistent
too. If that's the case, we should throw an error message prior
jumping onto 'cleanup' label as the helper lookup function
remains silent on no search result.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add support for CDROM devices for bhyve driver using
bhyve(8)'s 'ahci-cd' device type.
As bhyve currently does not support media insertion at runtime,
disallow to start a domain with an empty source path for cdrom
devices.
Create the structures and API's to hold and manage the iSCSI host device.
This extends the 'scsi_host' definitions added in commit id '5c811dce'.
A future patch will add the XML parsing, but that code requires some
infrastructure to be in place first in order to handle the differences
between a 'scsi_host' and an 'iSCSI host' device.
Split virDomainHostdevSubsysSCSI further. In preparation for having
either SCSI or iSCSI data, create a union in virDomainHostdevSubsysSCSI
to contain just a virDomainHostdevSubsysSCSIHost to describe the
'scsi_host' host device
To integrate the security driver with the storage driver we need to
pass a callback for a function that will chown storage volumes.
Introduce and document the callback prototype.
When restoring security labels in the dac driver the code would resolve
the file path and use the resolved one to be chown-ed. The setting code
doesn't do that. Remove the unnecessary code.
With my intended use of storage driver assist to chown files on remote
storage we will need a witness that will tell us whether the given
storage volume supports operations needed by the storage driver.
Gluster storage works on a similar principle to NFS where it takes the
uid and gid of the actual process and uses it to access the storage
volume on the remote server. This introduces a need to chown storage
files on gluster via native API.
Up to now, users have to pass two arguments at least: domain virt type
('qemu' vs 'kvm') and one of emulatorbin or architecture. This is not
much user friendly. Nowadays users mostly use KVM and share the host
architecture with the guest. So now, the API (and subsequently virsh
command) can be called with all NULLs (without any arguments).
Before this patch:
# virsh domcapabilities
error: failed to get emulator capabilities
error: virttype_str in qemuConnectGetDomainCapabilities must not be NULL
# virsh domcapabilities kvm
error: failed to get emulator capabilities
error: invalid argument: at least one of emulatorbin or architecture fields must be present
After:
# virsh domcapabilities
<domainCapabilities>
<path>/usr/bin/qemu-system-x86_64</path>
<domain>kvm</domain>
<machine>pc-i440fx-2.1</machine>
<arch>x86_64</arch>
<vcpu max='255'/>
</domainCapabilities>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds back the virDomainDef typedef into domain_conf and
makes all the numatune_conf functions independent of any virDomainDef
definitions.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Our seclabel parsing was repeatedly assigning malloc'd data into a
temporary variable, without first freeing the previous use. Among
other leaks flagged by valgrind:
==9312== 8 bytes in 1 blocks are definitely lost in loss record 88 of 821
==9312== at 0x4A0645D: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==9312== by 0x8C40369: strdup (strdup.c:42)
==9312== by 0x50EA799: virStrdup (virstring.c:676)
==9312== by 0x50FAEB9: virXPathString (virxml.c:90)
==9312== by 0x50FAF1E: virXPathStringLimit (virxml.c:112)
==9312== by 0x510F516: virSecurityLabelDefParseXML (domain_conf.c:4571)
==9312== by 0x510FB20: virSecurityLabelDefsParseXML (domain_conf.c:4720)
While it was multiple problems, it looks like commit da78351 (thankfully
unreleased) was to blame for all of them.
* src/conf/domain_conf.c (virSecurityLabelDefParseXML): Plug leaks
detected by valgrind.
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduced in commit 70571ccc (v1.2.4). Caught by valgrind:
==9816== 170 (32 direct, 138 indirect) bytes in 1 blocks are definitely lost in loss record 646 of 821
==9816== at 0x4A081D4: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==9816== by 0x50836FB: virAlloc (viralloc.c:144)
==9816== by 0x50AEC2B: virFirewallNew (virfirewall.c:204)
==9816== by 0x1E2308ED: ebiptablesDriverProbeStateMatch (nwfilter_ebiptables_driver.c:3715)
==9816== by 0x1E2309AD: ebiptablesDriverInit (nwfilter_ebiptables_driver.c:3742)
* src/nwfilter/nwfilter_ebiptables_driver.c
(ebiptablesDriverProbeStateMatch): Properly clean up.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1122205
Although the edits were changing in-memory XML, it was not flushed
to disk; so unless some other action changes XML, a libvirtd restart
would lose the changed information.
* src/conf/domain_conf.c (virDomainObjSetMetadata): Add parameter,
to save live status across restarts.
(virDomainSaveXML): Allow for test driver.
* src/conf/domain_conf.h (virDomainObjSetMetadata): Adjust
signature.
* src/bhyve/bhyve_driver.c (bhyveDomainSetMetadata): Adjust caller.
* src/lxc/lxc_driver.c (lxcDomainSetMetadata): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata): Likewise.
* src/test/test_driver.c (testDomainSetMetadata): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The patch described above introduced two problems caught by the compiler
and thus breaking the build.
One of the problems was comparison of unsigned with < 0 and the second
one jumped a variable init.
Before:
virsh # dominfo chx3
State: shut off
Max memory: 92160 KiB
Used memory: 92160 KiB
After:
virsh # dominfo container1
State: shut off
Max memory: 92160 KiB
Used memory: 0 KiB
Similar to qemu cases.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Added <capabilities> in the <features> section of LXC domains
configuration. This section can contain elements named after the
capabilities like:
<mknod state="on"/>, keep CAP_MKNOD capability
<sys_chroot state="off"/> drop CAP_SYS_CHROOT capability
Users can restrict or give more capabilities than the default using
this mechanism.
kernel commit 7dc5dbc879bd0779924b5132a48b731a0bc04a1e
forbid us doing a fresh mount for sysfs
when enable userns but disable netns.
This patch will create a bind mount in this senario.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Under ./configure --without-numactl but with numactl-devel installed,
the build fails with:
../../src/util/virnuma.c: In function 'virNumaNodeIsAvailable':
../../src/util/virnuma.c:407:5: error: implicit declaration of function 'numa_bitmask_isbitset' [-Werror=implicit-function-declaration]
return numa_bitmask_isbitset(numa_nodes_ptr, node);
^
and other failures, all because the configure results for particular
functions were used without regard to whether libnuma was even being
linked in.
* src/util/virnuma.c (virNumaGetPages): Fix message typo.
(virNumaNodeIsAvailable): Correct build when not using numactl.
Signed-off-by: Eric Blake <eblake@redhat.com>
virStorageBackendLogicalCreateVol contains a piece like:
if (vol->target.path != NULL) {
/* A target path passed to CreateVol has no meaning */
VIR_FREE(vol->target.path);
}
The 'if' is useless here, but 'syntax-check' doesn't catch that
because of the comment, so drop the 'if'.
Commit ef48a1b introduced virFindSCSIHostByPCI for Linux and
a stub for other platforms that returns -1 while the function
should return 'char *', so use 'return NULL' instead.
Commit fbd91d4 introduced virReadSCSIUniqueId with the third
argument 'int *result', however the stub for non-Linux patform
uses 'unsigned int *result', so change it to 'int *result'.
Pushed under the build breaker rule.
If a parentaddr was provided in the XML, have getAdapterName lookup
the stable address. This allows virStorageBackendSCSICheckPool() and
virStorageBackendSCSIRefreshPool() to automagically find the scsi_host
by its PCI address and unique_id
Introduce a new function to parse the provided scsi_host parent address
and unique_id value in order to find the /sys/class/scsi_host directory
which will allow a stable SCSI host address
Add a test to scsihosttest to lookup the host# name by using the PCI address
and unique_id value
Add an optional unique_id parameter to nodedev. Allows for easier lookup
and display of the unique_id value in order to document for use with
scsi_host code.
Introduce a new function to read the current scsi_host entry and return
the value found in the 'unique_id' file.
Add a 'scsihosttest' test (similar to the fchosttest, but incorporating some
of the concepts of the mocked pci test library) in order to read the
unique_id file like would be found in the /sys/class/scsi_host tree.
Between reboots and kernel reloads, the SCSI host number used for SCSI
storage pools may change requiring modification to the storage pool XML
in order to use a specific SCSI host adapter.
This patch introduces the "parentaddr" element and "unique_id" attribute
for the SCSI host adapter in order to uniquely identify the adapter
between reboots and kernel reloads. For now the goal is to only parse
and format the XML. Both will be required to be provided in order to
uniquely identify the desired SCSI host.
The new XML is expected to be as follows:
<adapter type='scsi_host'>
<parentaddr unique_id='3'>
<address domain='0x0000' bus='0x00' slot='0x1f' func='0x2'/>
</parentaddr>
</adapter>
where "parentaddr" is the parent device of the SCSI host using the PCI
address on which the device resides and the value from the unique_id file
for the device. Both the PCI address and unique_id values will be used
to traverse the /sys/class/scsi_host/ directories looking at each link
to match the PCI address reformatted to the directory link format where
"domain🚌slot:function" is found. Then for each matching directory
the unique_id file for the scsi_host will be used to match the unique_id
value in the xml.
For a PCI address listed above, this will be formatted to "0000:00:1f.2"
and the links in /sys/class/scsi_host will be used to find the host#
to be used for the 'scsi_host' device. Each entry is a link to the
/sys/bus/pci/devices directories, e.g.:
% ls -al /sys/class/scsi_host/host2
lrwxrwxrwx. 1 root root 0 Jun 1 00:22 /sys/class/scsi_host/host2 -> ../../devices/pci0000:00/0000:00:1f.2/ata3/host2/scsi_host/host2
% cat /sys/class/scsi_host/host2/unique_id
3
The "parentaddr" and "name" attributes are mutually exclusive to identify
the SCSI host number. Use of the "parentaddr" element will be the preferred
mechanism.
This patch only supports to parse and format the XMLs. Later patches will
add code to find out the scsi host number.
Rather than assume that NOT FC_HOST is SCSI_HOST, let's call them out
specifically. Makes it easier to find SCSI_HOST code/structs and ensures
something isn't missed in the future
We do so in the vast majority of places, so there's no problem of adding
the attribute to enforce it by the complier and fix a few leftover
places.
This was originally pointed out by Coverity as a recent change triggered
it's warning that our code checked the vast majority of returns from
virStrToLong_ui.
Convert the target snapshot state selector to a switch statement
enumerating all possible values. This points out a few mistakes in the
original selector.
The logic of the code is preserved until later patches.
Try to reconnect to the running domains after libvirtd restart. To
achieve that, do:
* Save domain state
- Modify virBhyveProcessStart() to save domain state to the state
dir
- Modify virBhyveProcessStop() to cleanup the pidfile and the state
* Detect if the state information loaded from the driver's state
dir matches the actual state. Consider domain active if:
- PID it points to exist
- Process title of this PID matches the expected one with the
domain name
Otherwise, mark the domain as shut off.
Note: earlier development bhyve versions before FreeBSD 10.0-RELEASE
didn't set proctitle we expect, so the current code will not detect
it. I don't plan adding support for this unless somebody requests
this.
As with the local SCSI passthrough devicesm qemu can't support snapshots
on those as the block ops are handled by the device. This is also true
for iSCSI backing of the disk. Remove the check for the local block
device and just forbid snapshot when the disk is of type 'lun'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1073368
There's no need to use it since we have this shiny functions
that even checks for conversion and overflow errors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
LXC network devices can now be assigned a custom NIC device name on the
container side. For example, this is configured with:
<interface type='network'>
<source network='default'/>
<guest dev="eth1"/>
</interface>
In this example the network card will appear as eth1 in the guest.
https://bugzilla.redhat.com/show_bug.cgi?id=1091866
Add a new boolean 'sparse'. This will be used by the logical backend
storage driver to determine whether the target volume is sparse or not
(also known by a snapshot or thin logical volume). Although setting sparse
to true at creation could be seen as duplicitous to setting during
virStorageBackendLogicalMakeVol() in case there are ever other code paths
between Create and FindLVs that need to know about the volume be sparse.
Use the 'sparse' in a new virStorageBackendLogicalVolWipe() to decide whether
to attempt to wipe the logical volume or not. For now, I have found no
means to wipe the volume without writing to it. Writing to the sparse
volume causes it to be filled. A sparse logical volume is not completely
writeable as there exists metadata which if overwritten will cause the
sparse lv to go INACTIVE which means pool-refresh will not find it.
Access to whatever lvm uses to manage data blocks is not provided by
any API I could find.
Commit 93e82727 introduced numatune_conf.h file that contains
typedefs already defined in domain_conf.h, such as:
- virDomainNumatune
- virDomainNumatunePtr
- virDomainDef
- virDomainDefPtr
As numatune_conf.h is included by domain_conf.h, clang
complains about redefinition of typedef and the build fails.
In order to fix it, drop typedefs already defined by numatume_conf.h
from domain_conf.h.
Coverity complains about the return value of ioctl not being checked.
Even though we carry on when this fails (just like qemu-img does),
we can log an error.
For non-local storage drivers we can't expect to use the "scrub" tool to
wipe the volume. Split the code into a separate backend function so that
we can add protocol specific code later.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1118710
The next patch will move the storage volume wiping code into the
individual backends. This patch splits out the common code to wipe a
local volume into a separate backend helper so that the next patch is
simpler.
When domain is started with numatune memory mode strict and the
nodeset does not include host NUMA node with DMA and DMA32 zones, KVM
initialization fails. This is because cgroup restrict even kernel
allocations. We are already doing numa_set_membind() which does the
same thing, only it does not restrict kernel allocations.
This patch leaves the userspace numa_set_membind() in place and moves
the cpuset.mems setting after the point where monitor comes up, but
before vcpu and emulator sub-groups are created.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Currently, we only bind the whole QEMU domain to memory nodes
specified in nodemask altogether. That, however, doesn't make much
sense when one wants to control from where the memory for particular
guest nodes should be allocated. QEMU allows us to do that by
specifying 'host-nodes' parameter for the 'memory-backend-ram' object,
so let's use that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When qemu switched to using OptsVisitor for -numa parameter, it did
two things in the same patch. One of them is that the numa parameter
is now visible in "query-command-line-options", the second one is that
it enabled using disjoint cpu ranges for -numa specification. This
will be used in later patch.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The numa patch series in qemu adds "memory-backend-ram" object type by
which we can tell whether we can use such objects.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That can be lately achieved with by having .param == NULL in the
virQEMUCapsCommandLineProps struct.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There were numerous places where numatune configuration (and thus
domain config as well) was changed in different ways. On some
places this even resulted in persistent domain definition not to be
stable (it would change with daemon's restart).
In order to uniformly change how numatune config is dealt with, all
the internals are now accessible directly only in numatune_conf.c and
outside this file accessors must be used.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since there was already public virDomainNumatune*, I changed the
private virNumaTune to match the same, so all the uses are unified and
public API is kept:
s/vir\(Domain\)\?Numa[tT]une/virDomainNumatune/g
then shrunk long lines, and mainly functions, that were created after
that:
sed -i 's/virDomainNumatuneMemPlacementMode/virDomainNumatunePlacement/g'
And to cope with the enum name, I haad to change the constants as
well:
s/VIR_NUMA_TUNE_MEM_PLACEMENT_MODE/VIR_DOMAIN_NUMATUNE_PLACEMENT/g
Last thing I did was at least a little shortening of already long
name:
s/virDomainNumatuneDef/virDomainNumatune/g
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There are many places with numatune-related code that should be put
into special numatune_conf and this patch creates a basis for that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In XML format, by definition, order of fields should not matter, so
order of parsing the elements doesn't affect the end result. When
specifying guest NUMA cells, we depend only on the order of the 'cell'
elements. With this patch all older domain XMLs are parsed as before,
but with the 'id' attribute they are parsed and formatted according to
that field. This will be useful when we have tuning settings for
particular guest NUMA node.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Excerpt from the virCommandAddArgBuffer() description: "Correctly
transfers memory errors or contents from buf to cmd."
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
