The 'absolute' clock offset type has a 'start' attribute which is an
unix epoch timestamp to which the hardware clock is always set at start
of the VM.
This is useful if some VM needs to be kept set to an arbitrary time for
e.g. testing or working around broken software.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu-vdagent channel is introduced since:
"05b09f039e conf: add qemu-vdagent channel"
It will be in the version 8.4.0.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add the ability to configure a qemu-vdagent in guest domains. This
device is similar to the spice vdagent channel except that qemu handles
the spice-vdagent protocol messages itself rather than routing them over
a spice protocol channel.
The qemu-vdagent device has two notable configuration options which
determine whether qemu will handle particular vdagent features:
'clipboard' and 'mouse'.
The 'clipboard' option allows qemu to synchronize its internal clipboard
manager with the guest clipboard, which enables client<->guest clipboard
synchronization for non-spice guests such as vnc.
The 'mouse' option allows absolute mouse positioning to be sent over the
vdagent channel rather than using a usb or virtio tablet device.
Sample configuration:
<channel type='qemu-vdagent'>
<target type='virtio' name='com.redhat.spice.0'/>
<source>
<clipboard copypaste='yes'/>
<mouse mode='client'/>
</source>
</channel>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Most of the anchors that were forward ported to formatdomain.rst when it
was converted are not actually referenced by our documentation. Since
it's now quite some time after the conversion was done we can remove
them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Additionally hyperlinks in other parts of the documentation are updated
to match.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Also adjust direct links from other pages.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Added "rss" and "rss_hash_report" configuration that should be
used with qemu virtio RSS. Both options are triswitches. Used as
"driver" options and affects only NIC with model type "virtio".
In other patches - options should turn on virtio-net RSS and hash
properties.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Fix the referenced anchor in 'formatdomain.rst' right away.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In 0895a0e, it was noted that the "sockets" value in the topology
section of capabilities reflects not the number of sockets per NUMA
node, not the total number.
Unfortunately, the fix was applied to the wrong place: the domain XML
format documentation, not that for the capabilities output. And, in
fact, the domain XML interprets "sockets" as the total number, not a
per-node value.
Back out this change in favour of a note in the capabilities
documentation instead.
Fixes: 0895a0e75d
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
This reverts commit 150540394d.
Turns out, this feature is not needed and QEMU will fix TSC
without any intervention from outside.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>P
Some versions of Windows hang on reboot if their TSC value is greater
than 2^54. The workaround is to reset the TSC to a small value. Add
to the domain configuration an attribute for this. It can be used
by QEMU and in principle also by ESXi, which has a property called
monitor_control.enable_softResetClearTSC as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since its v5.0.0 release QEMU is capable of specifying number of
threads used to allocate memory. It defaults to 1, which may be
too low for humongous guests with gigantic pages.
In general, on QEMU cmd line level it is possible to use
different number of threads per each memory-backend-* object, in
practical terms it's not useful. Therefore, use <memoryBacking/>
to set guest wide value and let all memory devices 'inherit' it,
silently. IOW, don't introduce per device knob because that would
only complicate things for a little or no benefit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The idea of the manual mode is to allow a synchronized snapshot in cases
when the storage is outsourced to an unmanaged storage provider which
requires cooperation with snapshotting.
The mode will instruct the hypervisor to pause along when the other
components are snapshotted and the 'manual' disk can be snapshotted
along. This increases latency of the snapshot but allows them in
otherwise impossible situations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when the hostname of the NBD server doesn't match the hostname
in the TLS certificate the new attribute 'tlsHostname' can be used to
override it.
Add the XML infrastructure and tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are dupliacated and non-continuous CPU IDs used in HMAT
example. Fix that.
Signed-off-by: Jing Qi <jinqi@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most people will want to use isa-debugcon to obtain debug output
for SeaBIOS / EDK II, so let's include a ready-made example for
that scenario in our documentation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce support for
<serial type='pty'>
<target type='isa-debug'>
<model type='isa-debugcon'/>
</target>
<address type='isa' iobase='0x402'/>
</console>
which is used as a way to receive debug messages from the
firmware on x86 platforms.
Note that the default port is hypervisor specific, with QEMU
currently using 0xe9 since that's the original Bochs debug port.
For use with SeaBIOS/OVMF, the iobase port needs to be explicitly
set to 0x402.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Many domain elements have "QEMU and KVM only" or "QEMU/KVM since x.y.z"
remarks. Most of the elements work for HVF domain, so it makes sense to
add respective notices for HVF domain.
All the elements have been manually tested.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU supports Hypervisor.framework since 2.12 as hvf accel.
Hypervisor.framework provides a lightweight interface to run a virtual
cpu on macOS without the need to install third-party kernel
extensions (KEXTs).
It's supported since macOS 10.10 on machines with Intel VT-x feature
set that includes Extended Page Tables (EPT) and Unrestricted Mode.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The docs illustration for the <os> schema contains a mixture of
incompatible configuration options. This is rather confusing and
misleading to users. Splitting the illustration into four separate
examples clarifies the situation.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add a sentence to the active_pcr_banks node documentation that clarifies
that when the active_pcr_banks node is removed from the XML or when it
is omitted that the set of active PCR banks is not changed anymore.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2039246
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The whole idea of VIR_DOMAIN_NUMATUNE_MEM_RESTRICTIVE is that the
memory location is restricted only via CGroups and thus can be
changed on the fly (which is exactly what
qemuDomainSetNumaParamsLive() does. Allow this mode there then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Normally the SEV measurement only covers the firmware
loader contents. When doing a direct kernel boot, however,
with new enough OVMF it is possible to ask for the
measurement to cover the kernel, ramdisk and command line.
It can't be done automatically as that would break existing
guests using direct kernel boot with old firmware, so there
is a new XML setting allowing this behaviour to be toggled.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Dirty ring feature was introduced in qemu-6.1.0, this patch
add the corresponding feature named 'dirty-ring', which enable
dirty ring feature when starting VM.
To enable the feature, the following XML needs to be added to
the guest's domain description:
<features>
<kvm>
<dirty-ring state='on' size='xxx'>
</kvm>
</features>
If property "state=on", property "size" must be specified, which
should be power of 2 and range in [1024, 65526].
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After previous commit it's possible for domains to fine tune TCG
features (well, just one - tb-cache). Check that domain has TCG
enabled, otherwise the feature makes no sense.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It may come handy to be able to tweak TCG options, in this
specific case the size of translation block cache size (tb-size).
Since we can expect more knobs to tweak let's put them under
common element, like this:
<domain>
<features>
<tcg>
<tb-cache unit='MiB'>128</tb-cache>
</tcg>
</features>
</domain>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extend the TPM backend XML with a node 'active_pcr_banks' that allows a
user to specify the PCR banks to activate before starting a VM. Valid
choices for PCR banks are sha1, sha256, sha384 and sha512. When the XML
node is provided, the set of active PCR banks is 'enforced' by running
swtpm_setup before every start of the VM. The activation requires that
swtpm_setup v0.7 or later is installed and may not have any effect
otherwise.
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'>
<active_pcr_banks>
<sha256/>
<sha384/>
</active_pcr_banks>
</backend>
</tpm>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2016599
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU version 3.1 introduced PV_SEND_IPI CPUID feature bit under
commit 7f710c32bb8 (target-i386: adds PV_SEND_IPI CPUID feature bit).
This patch adds a new KVM feature 'pv-ipi' to disable this feature
(enabled by default). Newer CPU platform (Ex, AMD Zen2) supports
hardware accelation for IPI in guest, to use this feature to get
better performance in some scenarios. Detailed about the discussion:
https://lkml.org/lkml/2021/10/20/423
To disable kvm-pv-ipi and have libvirt add "-cpu host,kvm-pv-ipi=off"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description:
<features>
<kvm>
<pv-ipi state='off'/>
</kvm>
</features>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit 7300ccc9b3.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
This change introduces a new libvirt sub-element <pci> under
<features> that can be used to configure all pci related features.
Currently the only sub-sub element supported by this sub-element is
'acpi-bridge-hotplug' as shown below:
<features>
<pci>
<acpi-bridge-hotplug state='on|off'/>
</pci>
</features>
The above option is only available for the QEMU driver, for x86 guests
only. It is a global option, affecting all PCI bridge controllers on
the guest.
The 'acpi-bridge-hotplug' option enables or disables ACPI hotplug
support for cold-plugged pci bridges. Examples of bridges include the
PCI-PCI bridge (pci-bridge controller) for pc (i440fx) machinetypes,
or PCIe-PCI bridges and pcie-root-port controllers for q35
machinetypes.
For pc machinetypes in x86, this option has been available in QEMU
since version 2.1. Please see the following changes in qemu repo:
9e047b982452c6 ("piix4: add acpi pci hotplug support")
133a2da488062e ("pc: acpi: generate AML only for PCI0 devices if PCI
bridge hotplug is disabled")
For q35 machinetypes, this was introduced in QEMU 6.1 with the
following changes in qemu repo:
(a) c0e427d6eb5fef ("hw/acpi/ich9: Enable ACPI PCI hot-plug")
(b) 17858a16950860 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on
Q35")
The reasons for enabling ACPI based hotplug for PCIe (q35) based
machines (as opposed to native hotplug) are outlined in (b). There are
use cases where users would still want to use native
hotplug. Therefore, this config option enables users to choose either
ACPI based hotplug or native hotplug for bridges (for example for pcie
root port controller in q35 machines).
Qemu capability validation checks have also been added along with
related unit tests to exercise the new conf option.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Laine Stump <laine@redhat.com>
This change introduces libvirt xml support to enable/disable hotplug on the
pci-root controller. It adds a 'target' subelement for the pci-root controller
with a 'hotplug' property. This property can be used to enable or disable
hotplug for the pci-root controller. For example, in order to disable hotplug
on the pci-root controller, one has to use set '<target hotplug='off'>' as
shown below:
<controller type='pci' model='pci-root'>
<target hotplug='off'/>
</controller>
'<target hotplug='on'>' option would enable hotplug for pci-root controller.
This is also the default value. This option is only available for pc machine
types and is applicable for qemu/kvm accelerator only.This feature was
introduced from qemu version 5.2 with the following change in qemu repository:
3d7e78aa7777f ("Introduce a new flag for i440fx to disable PCI hotplug on the root bus")
The above qemu commit describes some reasons why users might to disable hotplug
on PCI root buses.
Related unit tests to exercise the new conf option has also been added.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The virtio-mem has another property that isn't exposed yet:
current size exposed to the guest. Please note, that this is
different to <requested/> because esp. on sizing the memory
down guest may refuse to release some blocks. Therefore, let's
have another size to report in the XML. But because of its
nature, the <current/> won't be parsed and is report only (for
live XMLs).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virtio-mem is paravirtualized mechanism of adding/removing
memory to/from a VM. A virtio-mem-pci device is split into blocks
of equal size which are then exposed (all or only a requested
portion of them) to the guest kernel to use as regular memory.
Therefore, the device has two important attributes:
1) block-size, which defines the size of a block
2) requested-size, which defines how much memory (in bytes)
is the device requested to expose to the guest.
The 'block-size' is configured on command line and immutable
throughout device's lifetime. The 'requested-size' can be set on
the command line too, but also is adjustable via monitor. In
fact, that is how management software places its requests to
change the memory allocation. If it wants to give more memory to
the guest it changes 'requested-size' to a bigger value, and if it
wants to shrink guest memory it changes the 'requested-size' to a
smaller value. Note, value of zero means that guest should
release all memory offered by the device. Of course, guest has to
cooperate. Therefore, there is a third attribute 'size' which is
read only and reflects how much memory the guest still has. This
can be different to 'requested-size', obviously. Because of name
clash, I've named it 'current' and it is dealt with in future
commits (it is a runtime information anyway).
In the backend, memory for virtio-mem is backed by usual objects:
memory-backend-{ram,file,memfd} and their size puts the cap on
the amount of memory that a virtio-mem device can offer to a
guest. But we are already able to express this info using <size/>
under <target/>.
Therefore, we need only two more elements to cover 'block-size'
and 'requested-size' attributes. This is the XML I've came up
with:
<memory model='virtio-mem'>
<source>
<nodemask>1-3</nodemask>
<pagesize unit='KiB'>2048</pagesize>
</source>
<target>
<size unit='KiB'>2097152</size>
<node>0</node>
<block unit='KiB'>2048</block>
<requested unit='KiB'>1048576</requested>
</target>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</memory>
I hope by now it is obvious that:
1) 'requested-size' must be an integer multiple of
'block-size', and
2) virtio-mem-pci device goes onto PCI bus and thus needs PCI
address.
Then there is a limitation that the minimal 'block-size' is
transparent huge page size (I'll leave this without explanation).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The option "queue-size" for virtio-blk was added in qemu-2.12.0, and
default value increased from qemu-5.0.0.
However, increasing this value may lead to drop of random access
performance.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In the example for <memory model='dimm'/> we show how to
configure hugepages as backend. In the example we show 4MiB
hugepages which are non-standard and thus at the first glance may
mislead users thinking that a regular sized pages (4K) will be
used. Use 2MiB as the value instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The virtiofs project started off using "virtio-fs" but later switched to
the "virtiofs" spelling because it matches the spelling of the mount -t
virtiofs command-line. Update the kbase article with the new spelling so
it matches the virtiofs website.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We simply terminate qemu instead of issuing a reset as the semantics of
the setting dictate.
Fix it by handling it identically to 'fake reboot'.
We need to forbid the combination of 'onReboot' -> 'destroy' and
'onPoweroff' -> reboot though as the handling would be hairy and it
honetly makes no sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver didn't ever implement any meaningful handling for the
'preserve' action.
Forbid the flag in the qemu def validator and update the documentation
to be factual.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver didn't ever implement any meaningful handling for the
'rename-restart' action.
At this point the following handling would take place:
'on_reboot' set to 'rename-restart' is ignored on guest-initiated
reboots, the guest simply reboots.
For on_poweroff set to 'rename-restart' the following happens:
guest initiated shutdown -> 'destroy'
libvirt initiated shutdown -> 'reboot'
In addition when 'on_reboot' is 'destroy' in addition to 'on_poweroff'
being 'rename-restart' the guest is able to execute instructions after
issuing a reset before libvirt terminates it. This will be addressed
separately later.
Forbid the flag in the qemu def validator and update the documentation
to be factual.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support for customizable grabToggle key combinations with
<input type='evdev'>.
Signed-off-by: Justin Gatzen <justin.gatzen@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add documentation for launch security type s390-pv.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Even though 'id' attribute is output-only, we should accept xml
files containing it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1941594
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current information is not accurate, because the default
is 2.0 instead of 1.2 for the tpm-crb and tpm-spapr models.
Any detailed list will surely become obsolete and out of sync
with reality over time, so let's just document that the default
model depends on a number of factors and avoid getting any more
specific than that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When adding support for externally launched virtiofsd,
I was too liberal and did not require a target.
But the target is required, because it's passed to the
QEMU device, not to virtiofsd.
https://bugzilla.redhat.com/show_bug.cgi?id=1969232
Fixes: 12967c3e13
Fixes: 56dcdec1ac
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Disk serials are truncated arbitrarily and silently by qemu depending on
the device type and how they are configured. Since changing the current
state would lead to more regressions than we have now, document that the
truncation is arbitrary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The <audio> element is configuring exclusively a backend, not a device.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In case the user wants to share the disk image between multiple VMs the
qemu driver needs to hotplug such disks to instantiate the backends.
Since that doesn't work for all disk configs add a switch to force this
behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Since commit 68c5b6fb2b libxl also handles
a domain/cputune/vcpupin element in domU.xml.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
This adds a new XML element
<filesystem>
<binary>
<sandbox mode='chroot|namespace'/>
</binary>
</filesystem>
This will be used by qemu virtiofs
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The end quote of the argument of :since: must not have a space in front
of it as it's then not considered as end of the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This allows users to restrict memory nodes without setting any specific
memory policy, then 'restrictive' mode is useful.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
PCI devices can be associated with a unique integer index that is
exposed via ACPI. In Linux OS with systemd, this value is used for
provide a NIC device naming scheme that is stable across changes
in PCI slot configuration.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are two links to this document using anchors so they need to be
updated as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This lets the app expose the virtual SCSI or IDE disks as solid state
devices by setting a rate of '1', or rotational media by setting a
rate between 1025 and 65534.
https://bugzilla.redhat.com/show_bug.cgi?id=1498955
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The
<os firmware='efi'>
<firmware type='efi'>
<feature enabled='no' name='enrolled-keys'/>
</firmware>
</os>
repeats the firmware attribute twice. This has no functional benefit, as
evidenced by fact that we use a single struct field to store both
attributes, while needlessly introducing an error scenario. The XML can
just be simplified to:
<os firmware='efi'>
<firmware>
<feature enabled='no' name='enrolled-keys'/>
</firmware>
</os>
which also means that we don't need to emit the empty element
<firmware type='efi'/> for all existing configs too.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When the firmware auto-selection was introduced it always picked first
usable firmware based on the JSON descriptions on the host. It is
possible to add/remove/change the JSON files but it will always be for
the whole host.
This patch introduces support for configuring the auto-selection per VM
by adding users an option to limit what features they would like to have
available in the firmware.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The original text was not explaining what this attribute actually
controls and could have been interpreted as a control switch for the
Secure boot feature in firmwares.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This introduces support for the QEMU audio settings that are common to
all audio backends. These are expressed in the QAPI schema as settings
common to all backends, but in reality some backends ignore some of
them. For example, some backends are output only. The parser isn't
attempting to apply restrictions that QEMU itself doesn't apply.
<audio id='1' type='pulseaudio'>
<input mixingEngine='yes' fixedSettings='yes' voices='1' bufferLength='100'>
<settings frequency='44100' channels='2' format='s16'/>
</input>
<output mixingEngine='yes' fixedSettings='yes' voices='2' bufferLength='100'>
<settings frequency='22050' channels='4' format='f32'/>
</output>
</audio>
The <settings> child is only valid if fixedSettings='yes'
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When there are multiple <audio> backends specified, it is possible to
assign a specific one to the VNC server using
<graphics type='vnc'...>
<audio id='1'/>
</graphics>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The current <audio> element only allows an "OSS" audio backend, as this
is all that BHyve needed. This is now extended to cover most QEMU audio
backends. These backends all have a variety of attributes they support,
but this initial impl does the bare minimum, relying on built-in
defaults for everything. The only QEMU backend omitted is "dsound" since
the libvirt QEMU driver is not built on Windows platforms.
The SDL audio driver names are based on the SDL 2.0 drivers. It is not
intended to support SDL 1.2 drivers.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The <graphics type="vnc" .... powerControl="yes"/> option instructs the
VNC server to enable an extension that lets the client perform a
graceful shutdown, reboot and hard reset.
This is enabled by default since it cannot be assumed that the VNC
client user has administrator rights over the guest OS. In the case
where the VNC user is a guest administrator though, it is reasonable
to allow direct power control host side too.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Before the conversion to using systemd DBus API to set the cpu.shares
there was some magic conversion done by kernel which was documented in
virsh manpage as well. Now systemd errors out if the value is out of
range.
Since we enforce the range for other cpu cgroup attributes 'quota' and
'period' it makes sense to do the same for 'shares' as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the parser and docs were enhanced to support a <teaming> element
in a generic <hostdev>, the example XML for formatdomain.rst was
cut/pasted from the example for <interface type='hostdev'>. In my
haste I neglected to remove the <mac address='blah'/> element (which
is unused/ignored for generic <hostdev> and change the closing tag
from </interface> to </hostdev>
https://bugzilla.redhat.com/1927984
Fixes: db64acfbda
Reported-by: Yalan Zhang <yalzhang@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit <d505b8af58912ae1e1a211fabc9995b19bd40828> changed the cpu quota
value that reflects what kernel allows but did not update our
documentation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The <teaming> element in <interface> allows pairing two interfaces
together as a simple "failover bond" network device in a guest. One of
the devices is the "transient" interface - it will be preferred for
all network traffic when it is present, but may be removed when
necessary, in particular during migration, when traffic will instead
go through the other interface of the pair - the "persistent"
interface. As it happens, in the QEMU implementation of this teaming
pair (called "virtio failover" in QEMU) the transient interface is
always a host network device assigned to the guest using VFIO (aka
"hostdev"); the persistent interface is always an emulated virtio NIC.
When support was initially added for <teaming>, it was written to
require that the transient/hostdev device be defined using <interface
type='hostdev'>; this was done because the virtio failover
implementation in QEMU and the virtio guest driver demands that the
two interfaces in the pair have matching MAC addresses, and the only
way libvirt can guarantee the MAC address of a hostdev network device
is to use <interface type='hostdev'>, whose main purpose is to
configure the device's MAC address before handing the device to
QEMU. (note that <interface type='hostdev'> in turn requires that the
network device be an SRIOV VF (Virtual Function), as that is the only
type of network device whose MAC address we can set in a way that will
survive the device's driver init in the guest).
It has recently come up that some users are unable to use <teaming>
because they are running in a container environment where libvirt
doesn't have the necessary privileges or resources to set the VF's MAC
address (because setting the VF MAC is done via the same device's PF
(Physical Function), and the PF is not exposed to libvirt's container).
At the same time, these users *are* able to set the VF's MAC address
themselves in advance of staring up libvirt in the container. So they
could theoretically use the <teaming> feature if libvirt just skipped
the "setting the MAC address" part.
Fortunately, that is *exactly* the difference between <interface
type='hostdev'> (which must be a "hostdev VF") and <hostdev> (a "plain
hostdev" - it could be *any* PCI device; libvirt doesn't know what type
of PCI device it is, and doesn't care).
But what is still needed is for libvirt to provide a small bit of
information on the QEMU commandline argument for the hostdev, telling
QEMU that this device will be part of a team ("failover pair"), and
the id of the other device in the pair.
To make both of those goals simultaneously possible, this patch adds
support for the <teaming> element to plain <hostdev> - libvirt doesn't
try to set any MAC addresses, and QEMU gets the extra commandline
argument it needs)
(actually, this patch adds only the parsing/formatting of the
<teaming> element in <hostdev>. The next patch will actually wire that
into the qemu driver.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For hardware virtualization this is functionally identical to the
existing host-passthrough mode so the same caveats apply.
For emulated guest this exposes the maximum featureset supported by
the emulator. Note that despite being emulated this is not guaranteed
to be migration safe, especially if different emulator software versions
are used on each host.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Many of Xen's text documents have been converted to man pages over
the years, the channel doc being one of them. Replace the broken
channel.txt link with the name of the man page providing the same
information.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pass the parameter clock rt to qemu to ensure that the
virtual machine is not synchronized with the host time
Signed-off-by: gongwei <gongwei@smartx.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
