QEMU 1.3 and newer support an alternative URI-based syntax to specify
the location of an NBD server. Libvirt can keep on using the old
syntax in general, but only the URI syntax supports IPv6 addresses.
The URI syntax also supports relative paths to Unix sockets. These
should never be used but aren't explicitly blocked either by the parser,
so support it just in case.
The URI syntax is intentionally compatible with Gluster's, and the
code can be reused.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This reuses the XML format that was introduced for Gluster.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
These are supported by nbd-server and by the NBD server that QEMU
embeds for live image access.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Move the code to an external function, and structure it to prepare
the addition of new features in the next few patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Enable more testing of NBD parsing, to ensure rewrites work.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We've already scrubbed for comparisons of 'uid_t == -1' (which fail
on platforms where uid_t is a u16), but another one snuck in.
* src/util/virutil.c (virSetUIDGIDWithCaps): Correct uid comparison.
* cfg.mk (sc_prohibit_risky_id_promotion): New rule.
QEMU added -drive in 2007, and NBD in 2008. Both appeared first in
release 0.10.0. Thus the code to support network disks without -drive
is dead, and in fact it incorrectly escapes commas. Drop it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After we switched to C99 initialization, I noticed there were many
places where the specification of .flags parameter differed. After
going through many options and deciding whether to unify the
initialization to be '.flags = 0' or '.flags = VSH_OFLAG_NONE', I
realized both can be removed and it makes the code easier to go
through.
According to the man page, the memspec parameter should have the
'--memspec' option mandatory and this is as close as we can get to
that. What this change does is explained below.
man virsh:
snapshot-create-as ... [[--live] [--memspec memspec]]
virsh help snapshot-create-as before this patch:
SYNOPSIS
snapshot-create-as ... [<memspec>] ...
...
OPTIONS
[--memspec] <string> ...
virsh help snapshot-create-as after this patch:
SYNOPSIS
snapshot-create-as ... [--memspec <string>] ...
...
OPTIONS
--memspec <string> ...
When getting CPUs' information, it assumes that CPU indexes
are not contiguous. But for ppc64 platform, CPU indexes are not
contiguous because SMT is needed to be disabled, so CPU information
is not right on ppc64 and vpuinfo, vcpupin can't work corretly.
This patch is to remove the assumption to be compatible with ppc64.
Test:
4 vcpus are assigned to one VM and execute vcpuinfo command.
Without patch: There is only one vcpu informaion can be listed.
With patch: All vcpus' information can be listed correctly.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
The text version
of LGPLv2.1 available at
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt is slightly
different from COPYING.LIB:
- several paragraphs were rewrapped
- the FSF address has changed, so the license has been changed to
indicate the newer address
I've checked that there are no changes in the license text apart from
the updated address, which is what I want to fix with this commit.
This patch adds auditing of resources used by Virtio RNG devices. Only
resources on the local filesystems are audited.
The audit logs look like:
For the 'random' backend:
type=VIRT_RESOURCE msg=audit(1363099126.643:31): pid=995252 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=rng reason=start vm="qcow-test" uuid=118733ed-b658-3e22-a2cb-4fe5cb3ddf79 old-rng="?" new-rng="/dev/random": exe="/home/pipo/libvirt/daemon/.libs/libvirtd" hostname=? addr=? terminal=pts/0 res=success'
For local character device source:
type=VIRT_RESOURCE msg=audit(1363100164.240:96): pid=995252 uid=0 auid=4294967295 ses=4294967295 msg='virt=kvm resrc=rng reason=start vm="qcow-test" uuid=118733ed-b658-3e22-a2cb-4fe5cb3ddf79 old-rng="?" new-rng="/tmp/unix.sock": exe="/home/pipo/libvirt/daemon/.libs/libvirtd" hostname=? addr=? terminal=pts/0 res=success'
Adding test cases for virtio-scsi and virtio-rng. Since ccw is covering
the superset of the s390 bus handling, these are deemed to be sufficient.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Newer versions of QEMU support virtio-scsi and virtio-rng devices
on the virtio-s390 and ccw buses. Adding capability detection,
address assignment and command line generation for that.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
QEMU_CAPS_VIRTIO_SCSI_PCI implies that virtio-scsi is only supported
for the PCI bus, which is not the case. Remove the _PCI suffix.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
My commit 7a2e845a86 (and its
prerequisites) managed to effectively ignore the
clear_emulator_capabilities setting in qemu.conf (visible in the code
as the VIR_EXEC_CLEAR_CAPS flag when qemu is being exec'ed), with the
result that the capabilities are always cleared regardless of the
qemu.conf setting. This patch fixes it by passing the flag through to
virSetUIDGIDWithCaps(), which uses it to decide whether or not to
clear existing capabilities before adding in those that were
requested.
Note that the existing capabilities are *always* cleared if the new
process is going to run as non-root, since the whole point of running
non-root is to have the capabilities removed (it's still possible to
maintain individual capabilities as needed using the capBits argument
though).
Multi-head QXL support is so useful that distros have started to
backport it to qemu earlier than 1.2. After discussion with
Alon Levy, we determined that the existence of the qxl-vga.surfaces
property is a reliable indicator of whether '-device qxl-vga' works,
or whether we have to stick to the older '-vga qxl'. I'm leaving
in the existing check for QEMU_CAPS_DEVICE_VIDEO_PRIMARY tied to
qemu 1.2 and newer (in case qemu is built without qxl support),
but for those distros that backport qxl, this additional capability
check will allow the correct command line for both RHEL 6.3 (which
lacks the feature) and RHEL 6.4 (where qemu still claims to be
version 0.12.2.x, but has backported multi-head qxl).
* src/qemu/qemu_capabilities.c (virQEMUCapsObjectPropsQxlVga): New
property test.
(virQEMUCapsExtractDeviceStr): Probe for backport of new
capability to qemu earlier than 1.2.
* tests/qemuhelpdata/qemu-kvm-1.2.0-device: Update test.
* tests/qemuhelpdata/qemu-1.2.0-device: Likewise.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device:
Likewise.
The src/lxc/lxc_*_dispatch.h files only had deps on the
RPC generator script & the XDR definition file. So when
the Makefile.am args passed to the generator were change,
the disaptch code was not re-generated. This caused a
build failure
CC libvirt_lxc-lxc_controller.o
lxc/lxc_controller.c: In function 'virLXCControllerSetupServer':
lxc/lxc_controller.c:718:47: error: 'virLXCMonitorProcs' undeclared (first use in this function)
lxc/lxc_controller.c:718:47: note: each undeclared identifier is reported only once for each function it appears in
lxc/lxc_controller.c:719:47: error: 'virLXCMonitorNProcs' undeclared (first use in this function)
make[3]: *** [libvirt_lxc-lxc_controller.o] Error 1
For added fun, the generated files were not listed in
CLEANFILES, so only a 'git clean -f' would fix the build
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The naming used in the RPC protocols for the LXC monitor and
lock daemon confused the script used to generate systemtap
helper functions. Rename the LXC monitor protocol symbols to
reduce confusion. Adapt the gensystemtap.pl script to cope
with the LXC monitor / lock daemon naming conversions.
This has no functional impact on RPC wire protocol, since
names are only used in the C layer
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When converting to virObject, the probes on the 'Free' functions
were removed on the basis that there is a probe on virObjectFree
that suffices. This puts a burden on people writing probe scripts
to identify which object is being dispose. This adds back probes
in the 'Dispose' functions and updates the rpc monitor systemtap
example to use them
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Normally libvirtd should run with a SELinux label
system_u:system_r:virtd_t:s0-s0:c0.c1023
If a user manually runs libvirtd though, it is sometimes
possible to get into a situation where it is running
system_u:system_r:init_t:s0
The SELinux security driver isn't expecting this and can't
parse the security label since it lacks the ':c0.c1023' part
causing it to complain
internal error Cannot parse sensitivity level in s0
This updates the parser to cope with this, so if no category
is present, libvirtd will hardcode the equivalent of c0.c1023.
Now this won't work if SELinux is in Enforcing mode, but that's
not an issue, because the user can only get into this problem
if in Permissive mode. This means they can now start VMs in
Permissive mode without hitting that parsing error
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Pull the code which parses the current process MCS range
out of virSecuritySELinuxMCSFind and into a new method
virSecuritySELinuxMCSGetProcessRange.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The body of the loop in virSecuritySELinuxMCSFind would
directly 'return NULL' on OOM, instead of jumping to the
cleanup label. This caused a leak of several local vars.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If an LXC domain failed to start because of a bogus SELinux
label, virLXCProcessStart would call VIR_CLOSE(0) by mistake.
This is because the code which initializes the member of the
ttyFDs array to -1 got moved too far away from the place where
the array is first allocated.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When opening a stream to a device which is a TTY, that device
may become the controlling TTY of libvirtd, if libvirtd was
daemonized. This in turn means when the other end of the stream
closes, libvirtd gets SIGHUP, causing it to reload its config.
Prevent this by forcing O_NOCTTY on all streams that are opened
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Qemu's implementation of virtio RNG supports rate limiting of the
entropy used. This patch exposes the option to tune this functionality.
This patch is based on qemu commit 904d6f588063fb5ad2b61998acdf1e73fb4
The rate limiting is exported in the XML as:
<devices>
...
<rng model='virtio'>
<rate bytes='123' period='1234'/>
<backend model='random'/>
</rng>
...
In debug mode, the bug failed to start vm
error: Failed to start domain rhel5u9
error: internal error Out of space while reading console log output:
...
We didn't yet expose the virtio device attach and detach functionality
for s390 domains as the device hotplug was very limited with the old
virtio-s390 bus. With the CCW bus there's full hotplug support for
virtio devices in QEMU, so we are adding this to libvirt too.
Since the virtio hotplug isn't limited to PCI anymore, we change the
function names from xxxPCIyyy to xxxVirtioyyy, where we handle all
three virtio bus types.
Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This commit adds the QEMU driver support for CCW addresses. The
current QEMU only allows virtio devices to be attached to the
CCW bus. We named the new capability indicating that support
QEMU_CAPS_VIRTIO_CCW accordingly.
The fact that CCW devices can only be assigned to domains with a
machine type of s390-ccw-virtio requires a few extra checks for
machine type in qemu_command.c on top of querying
QEMU_CAPS_VIRTIO_{CCW|S390}.
The majority of the new functions deals with CCW address generation
and management.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Add necessary handling code for the new s390 CCW address type to
virDomainDeviceInfo. Further, introduce memory management, XML
parsing, output formatting and range validation for the new
virDomainDeviceCCWAddress type.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The native bus for s390 I/O is called CCW (channel command word).
As QEMU has added basic support for the CCW bus, i.e. the
ability to assign CCW devnos (bus addresses) to devices.
Domains with the new machine type s390-ccw-virtio can use the
CCW bus. Currently QEMU will only allow to define virtio
devices on the CCW bus.
Here we add the new machine type and the new device address to the
schema definition and add a new paragraph to the domain XML
documentation.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
In some startup failure modes, the fuse thread may get itself
wedged. This will cause the entire libvirt_lxc process to
hang trying to the join the thread. There is no compelling
reason to wait for the thread to exit if the whole process
is exiting, so just daemonize the fuse thread instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A number of symbols are only present when GNUTLS is enabled.
Thus we must use a separate libvirt_gnutls.syms file for them
instead of libvirt_private.syms
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainLxcEnterNamespace method mistakenly uses
virCheckFlags, which returns immediately instead of
virCheckFlagsGoto which jumps to the error cleanup
patch where there is a virDispatchError call
The virDomainGetSecurityLabel method is currently (mistakenly)
showing the label of the libvirt_lxc process:
...snip...
Security model: selinux
Security DOI: 0
Security label: system_u:system_r:virtd_t:s0-s0:c0.c1023 (permissive)
when it should be showing the init process label
...snip...
Security model: selinux
Security DOI: 0
Security label: system_u:system_r:svirt_t:s0:c724,c995 (permissive)
Add a new virDomainLxcEnterSecurityLabel() function as a
counterpart to virDomainLxcEnterNamespaces(), which can
change the current calling process to have a new security
context. This call runs client side, not in libvirtd
so we can't use the security driver infrastructure.
When entering a namespace, the process spawned from virsh
will default to running with the security label of virsh.
The actual desired behaviour is to run with the security
label of the container most of the time. So this changes
virsh lxc-enter-namespace command to invoke the
virDomainLxcEnterSecurityLabel method.
The current behaviour is:
LABEL PID TTY TIME CMD
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 1 pts/0 00:00:00 systemd
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 3 pts/1 00:00:00 sh
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 24 ? 00:00:00 systemd-journal
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 29 ? 00:00:00 dhclient
staff_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 47 ? 00:00:00 ps
Note the ps command is running as unconfined_t, After this patch,
The new behaviour is this:
virsh -c lxc:/// lxc-enter-namespace dan -- /bin/ps -eZ
LABEL PID TTY TIME CMD
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 1 pts/0 00:00:00 systemd
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 3 pts/1 00:00:00 sh
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 24 ? 00:00:00 systemd-journal
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 32 ? 00:00:00 dhclient
system_u:system_r:svirt_lxc_net_t:s0:c0.c1023 38 ? 00:00:00 ps
The '--noseclabel' flag can be used to skip security labelling.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With our recent patch (1715c83b5f) we thrive to get the correct
number of maximal VCPUs. However, we are using a constant from
linux/kvm.h which may be not defined in every distro. Hence, we
should guard usage of the constant with ifdef preprocessor
directive. This was introduced in kernel:
commit 8c3ba334f8588e1d5099f8602cf01897720e0eca
Author: Sasha Levin <levinsasha928@gmail.com>
Date: Mon Jul 18 17:17:15 2011 +0300
KVM: x86: Raise the hard VCPU count limit
The patch raises the hard limit of VCPU count to 254.
This will allow developers to easily work on scalability
and will allow users to test high VCPU setups easily without
patching the kernel.
To prevent possible issues with current setups, KVM_CAP_NR_VCPUS
now returns the recommended VCPU limit (which is still 64) - this
should be a safe value for everybody, while a new KVM_CAP_MAX_VCPUS
returns the hard limit which is now 254.
$ git desc 8c3ba334f
v3.1-rc7-48-g8c3ba33
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.
This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:
1) Get rid of the stuff from virCaps
2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.
This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
Currently the server determines whether authentication of clients
is complete, by checking whether an identity is set. This patch
removes that lame hack and replaces it with an explicit method
for changing the client auth code
* daemon/remote.c: Update for new APis
* src/libvirt_private.syms, src/rpc/virnetserverclient.c,
src/rpc/virnetserverclient.h: Remove virNetServerClientGetIdentity
and virNetServerClientSetIdentity, adding a new method
virNetServerClientSetAuth.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a virThreadCancel function. This functional is inherently
dangerous and not something we want to use in general, but
integration with SELinux requires that we provide this stub.
We leave out any Win32 impl to discourage further use and
because obviously SELinux isn't enabled on Win32
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When setting up disks with loop devices for LXC, one of the
switch cases was missing a 'break' causing it to fallthrough
to an error condition.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
At least one caller may call qemuSharedDiskEntryFree with NULL as the
first argument. Let's make the function similar to other *Free functions
and do nothing in such case.
Sparse LVM volumes do not behave in the way one would naively expect.
The allocation does not automatically increase (which is different from
how sparse files work).
Properly check the return value of vshCommandOptStringReq for xmlfile:
* error out on incorrect input (--xmlfile '')
* use default XML <domainsnapshot/> with no --xmlfile specified
(Broken by commit b2e8585)
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=919826
