virNetlinkCommand() processes only one response message, while some
netlink commands, like route dumping, need to process several.
Add virNetlinkDumpCommand() as a virNetlinkCommand() sister.
Allow to reuse as much as possible from virNetlinkCommand(). This
comment prepares for the introduction of virNetlinkDumpCommand()
only differing by how it handles the responses.
Commit id '85af0b8' added a 'timeout' as the 4th parameter to
qemuMonitorOpen, but neglected to update the ATTRIBUTE_NONNULL(4)
to be (5) for the cb parameter.
It was pointed out here:
https://bugzilla.redhat.com/show_bug.cgi?id=1331796#c4
that we shouldn't be adding a "no-resolv" to the dnsmasq.conf file for
a network if there isn't any <forwarder> element that specifies an IP
address but no qualifying domain. If there is such an element, it will
handle all DNS requests that weren't otherwise handled by one of the
forwarder entries with a matching domain attribute. If not, then DNS
requests that don't match the domain of any <forwarder> would not be
resolved if we added no-resolv.
So, only add "no-resolv" when there is at least one <forwarder>
element that specifies an IP address but no qualifying domain.
We reported error in caller virQEMUCapsCacheLookupByArch.
So the same error messages in qemuConnectGetDomainCapabilities
is useless.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Calling virCPUUpdateLive on a domain with no guest CPU configuration
does not make sense. Especially when doing so would crash libvirtd.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Use "virStoragePoolObj" as a prefix for any external API in virstorageobj.
Also a couple of functions were local to virstorageobj.c, so remove their
external defs iin virstorageobj.h.
NB: The virStorageVolDef* API's won't change.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In an effort to be consistent with the source module, alter the function
prototypes to follow the similar style of source with the "type" on one
line followed by the function name and arguments on subsequent lines with
with argument getting it's own line.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Alter the format of the code to follow more recent style guidelines of
two empty lines between functions, function decls with "[static] type"
on one line followed by function name with arguments to functions each
on one line.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move all the StoragePoolObj related API's into their own module
virstorageobj from the storage_conf
Purely code motion at this point, plus adjustments to cleanly build
Signed-off-by: John Ferlan <jferlan@redhat.com>
The log and lock protocol don't have an extra handshake to close the
connection. Instead they just close the socket. Unfortunately that
resulted into a lot of spurious garbage logged to the system log files:
2017-03-17 14:00:09.730+0000: 4714: error : virNetSocketReadWire:1800 : End of file while reading data: Input/output error
or in the journal as:
Mar 13 16:19:33 xxxx virtlogd[32360]: End of file while reading data: Input/output error
Use the new facility in the netserverclient to suppress the IO error
report from the virNetSocket layer.
When starting a domain with custom guest CPU specification QEMU may add
or remove some CPU features. There are several reasons for this, e.g.,
QEMU/KVM does not support some requested features or the definition of
the requested CPU model in libvirt's cpu_map.xml differs from the one
QEMU is using. We can't really avoid this because CPU models are allowed
to change with machine types and libvirt doesn't know (and probably
doesn't even want to know) about such changes.
Thus when we want to make sure guest ABI doesn't change when a domain
gets migrated to another host, we need to update our live CPU definition
according to the CPU QEMU created. Once updated, we will change CPU
checking to VIR_CPU_CHECK_FULL to make sure the virtual CPU created
after migration exactly matches the one on the source.
https://bugzilla.redhat.com/show_bug.cgi?id=822148https://bugzilla.redhat.com/show_bug.cgi?id=824989
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuMonitorGetGuestCPU can now optionally create CPU data from
filtered-features in addition to feature-words.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The checks are now in a dedicated qemuProcessVerifyHypervFeatures
function.
In addition to moving the code this patch also fixes a few bugs: the
original code was leaking cpuFeature and the return value of
virCPUDataCheckFeature was not checked properly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The attribute can be used to request a specific way of checking whether
the virtual CPU matches created by the hypervisor matches the
specification in domain XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The disk tuning group parameter is ignored by qemu if no other
throttling options are set. Reject such configuration, since the name
would not be honored after setting parameters via the live tuning API.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1433180
When checking capabilities for qemu we need to check whether subsets of
the disk throttling settings are supported. Extract the checks into a
separate functions as they will be reused in next patch.
While the code path that queries the monitor allocates a separate copy
of the 'group_name' string the path querying the config would not copy
it. The call to virTypedParameterAssign would then steal the pointer
(without clearing it) and the RPC layer freed it. Any subsequent call
resulted into a crash.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1433183
ioh3420 is emulated Intel hardware, so it always looked
quite out of place in aarch64/virt guests. Even for x86/q35
guests, the recently-introduced pcie-root-port is a better
choice because, unlike ioh3420, it doesn't require IO space
(a fairly constrained resource) to work.
If pcie-root-port is available in QEMU, use it; ioh3420 is
still used as fallback for when pcie-root-port is not
available.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1408808
QEMU 2.9 introduces the pcie-root-port device, which is
a generic version of the existing ioh3420 device.
Make the new device available to libvirt users.
If the SASL config does not have any mechanisms we currently
just report an empty list to the client which will then
fail to identify a usable mechanism. This is a server config
error, so we should fail immediately on the server side.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Linux still defaults to a 1024 open file handle limit. This causes
scalability problems for libvirtd / virtlockd / virtlogd on large
hosts which might want > 1024 guest to be running. In fact if each
guest needs > 1 FD, we can't even get to 500 guests. This is not
good enough when we see machines with 100's of physical cores and
TBs of RAM.
In comparison to other memory requirements of libvirtd & related
daemons, the resource usage associated with open file handles
is essentially line noise. It is thus reasonable to increase the
limits unconditionally for all installs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There were couple of reports on the list (e.g. [1]) that guests
with huge amounts of RAM are unable to start because libvirt
kills qemu in the initialization phase. The problem is that if
guest is configured to use hugepages kernel has to zero them all
out before handing over to qemu process. For instance, 402GiB
worth of 1GiB pages took around 105 seconds (~3.8GiB/s). Since we
do not want to make the timeout for connecting to monitor
configurable, we have to teach libvirt to count with this
fact. This commit implements "1s per each 1GiB of RAM" approach
as suggested here [2].
1: https://www.redhat.com/archives/libvir-list/2017-March/msg00373.html
2: https://www.redhat.com/archives/libvir-list/2017-March/msg00405.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While connecting to qemu monitor, the first thing we do is wait
for it to show up. However, we are doing it with some timeout to
avoid indefinite waits (e.g. when qemu doesn't create the monitor
socket at all). After beaa447a29 we are using exponential back
off timeout meaning, after the first connection attempt we wait
1ms, then 2ms, then 4 and so on. This allows us to bring down
wait time for small domains where qemu initializes quickly.
However, on the other end of this scale are some domains with
huge amounts of guest memory. Now imagine that we've gotten up to
wait time of 15 seconds. The next one is going to be 30 seconds,
and the one after that whole minute. Well, okay - with current
code we are not going to wait longer than 30 seconds in total,
but this is going to change in the next commit.
The exponential back off is usable only for first few iterations.
Then it needs to be caped (one second was chosen as the limit)
and switch to constant wait time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Fix a "bug" in the storage pool test driver code which "assumed"
testStoragePoolObjSetDefaults should fill in the configFile for
both the Define/Create (persistent) and CreateXML (transient) pools
by just VIR_FREE()'ing it during CreateXML. Because the configFile
was filled in, during Destroy the pool wouldn't be free'd which
could cause issues for future patches which add tests to validate
vHBA creation for the storage pool using the same name.
Commit id 'bb74a7ffe' added a fairly non specific message when providing
only the <parent wwnn='xxx'/> or <parent wwpn='xxx'/> instead of providing
both wwnn and wwpn. This patch just modifies the message to be more specific
about which was missing.
Rather than returning true/false and having the caller check if the
vHBA was actually created, let's do that check within the CreateVport
function. That way the caller can faithfully assume success based
on a name start the thread looking for the LUNs. Prior to this change
it's possible that the vHBA wasn't really created (e.g if the call to
virVHBAGetHostByWWN returned NULL), we'd claim success, but in reality
there'd be no vHBA for the pool. This also fixes a second yet seen
issue that if the nodedev was present, but the parent by name wasn't
provided (perhaps parent by wwnn/wwpn or by fabric_name), then a failure
would be returned. For this path it shouldn't be an error - we should
just be happy that something else is managing the device and we don't
have to create/delete it.
The end result is that the createVport code can now just start the
refresh thread once it gets a non NULL name back.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the bulk of createVport and rename to virNodeDeviceCreateVport.
Remove the deleteVport entirely and replace with virNodeDeviceDeleteVport
Signed-off-by: John Ferlan <jferlan@redhat.com>
The function is actually in virutil.c, but prototyped in virfile.h.
This patch fixes that by renaming the function to virWaitForDevices,
adding the prototype in virutil.h and libvirt_private.syms, and then
changing the callers to use the new name.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the virStoragePoolSourceAdapter from storage_conf.h and rename
to virStorageAdapter.
Continue with code realignment for brevity and flow.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rework the code to use the new FCHost specific adapter structures.
Also rework the parameters to only pass what's need and leave logic in
the caller for the adapter type and the need to call the helpers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rework the helpers/APIs to use the FCHost and SCSIHost adapter types.
Continue to realign the code for shorter lines.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rework the helpers/APIs to use the FCHost and SCSIHost adapter types.
Continue to realign the code for shorter lines.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than have lots of ugly inline code, create helpers to try and
make things more readable. While creating the helpers realign the code
as necessary.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than have lots of ugly inline code, create helpers to try and
make things more readable. While creating the helpers realign the code
as necessary.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than use virXPathString, pass along an virXPathNode and alter
the parsing to use virXMLPropString.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Split out the code that munges through the storage pool adapter into
helpers - it's about to be moved into it's own source file.
This is purely code motion at this point.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id 'bb74a7ffe' added some new fields to search for a fchost by
parent wwnn/wwpn or parent_fabric_name, but neglected to validate that
the data within the fields was valid at parse time. This could lead to
eventual failure at run time, so rather than have the failure then, let's
validate now.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1428209
Commit id 'bb74a7ffe' neglected to check that both the parent_wwnn
parent_wwpn are in the XML if one or the other is similar to how
the node device code checked (commit id '2b13361bc').
If only one is provided, the "default" is to use a vHBA capable
adapter (see commit id '78be2e8b'), so the vHBA could start, but
perhaps not on the expected adapter.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Some users might want to pass a blockdev or a chardev as a
backend for NVDIMM. In fact, this is expected to be the mostly
used configuration. Therefore libvirt should allow the device in
devices CGroup then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have APIs for relabel memdevs on hotplug, fill in the
missing implementation in qemu hotplug code.
The qemuSecurity wrappers might look like overkill for now,
because qemu namespace code does not deal with the nvdimms yet.
Nor does our cgroup code. But hey, there's cgroup_device_acl
variable in qemu.conf. If users add their /dev/pmem* device in
there, the device is allowed in cgroups and created in the
namespace so they can successfully passthrough it to the domain.
It doesn't look like overkill after all, does it?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When domain is being started up, we ought to relabel the host
side of NVDIMM so qemu has access to it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When domain is being started up, we ought to relabel the host
side of NVDIMM so qemu has access to it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For NVDIMM devices it is optionally possible to specify the size
of internal storage for namespaces. Namespaces are a feature that
allows users to partition the NVDIMM for different uses.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that NVDIMM has found its way into libvirt, users might want
to fine tune some settings for each module separately. One such
setting is 'share=on|off' for the memory-backend-file object.
This setting - just like its name suggest already - enables
sharing the nvdimm module with other applications. Under the hood
it controls whether qemu mmaps() the file as MAP_PRIVATE or
MAP_SHARED.
Yet again, we have such config knob in domain XML, but it's just
an attribute to numa <cell/>. This does not give fine enough
tuning on per-memdevice basis so we need to have the attribute
for each device too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So, majority of the code is just ready as-is. Well, with one
slight change: differentiate between dimm and nvdimm in places
like device alias generation, generating the command line and so
on.
Speaking of the command line, we also need to append 'nvdimm=on'
to the '-machine' argument so that the nvdimm feature is
advertised in the ACPI tables properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
NVDIMM is new type of memory introduced into QEMU 2.6. The idea
is that we have a Non-Volatile memory module that keeps the data
persistent across domain reboots.
At the domain XML level, we already have some representation of
'dimm' modules. Long story short, NVDIMM will utilize the
existing <memory/> element that lives under <devices/> by adding
a new attribute 'nvdimm' to the existing @model and introduce a
new <path/> element for <source/> while reusing other fields. The
resulting XML would appear as:
<memory model='nvdimm'>
<source>
<path>/tmp/nvdimm</path>
</source>
<target>
<size unit='KiB'>523264</size>
<node>0</node>
</target>
<address type='dimm' slot='0'/>
</memory>
So far, this is just a XML parser/formatter extension. QEMU
driver implementation is in the next commit.
For more info on NVDIMM visit the following web page:
http://pmem.io/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Frankly, this function is one big mess. A lot of arguments,
complicated behaviour. It's really surprising that arguments were
in random order (input and output arguments were mixed together),
the documentation was outdated, the description of return values
was bogus.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Even though this variable contains just values from an enum where
zero has the usual meaning, it's enum after all and we should
check it as such.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduce config file support for the bhyve driver. The only available
setting at present is 'firmware_dir' for specifying a directory with
UEFI firmware files.
One of the main reasons for introducing host-model CPU definition in a
domain capabilities XML was the inability to express disabled features
in a host capabilities XML. That is, when a host CPU is, e.g., Haswell
without x2apic support, host capabilities XML will have to report it as
Westmere + a bunch of additional features., but we really want to use
Haswell - x2apic when creating a host-model CPU.
Unfortunately, I somehow forgot to do the last step and the code would
just copy the CPU definition found in the host capabilities XML. This
changed recently for new QEMU versions which allow us to query host CPU,
but any slightly older QEMU will not benefit from any change I did. This
patch makes sure the right CPU model is filled in the domain
capabilities even with old QEMU.
The issue was reported in
https://bugzilla.redhat.com/show_bug.cgi?id=1426456
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function is now called virQEMUCapsProbeHostCPU. Both the refactoring
and the change of the name is done for consistency with a new function
which will be introduced in the following commit.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When creating host CPU definition usable with a given emulator, the CPU
should not be defined using an unsupported CPU model. The new @models
and @nmodels parameters can be used to limit CPU models which can be
used in the result.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The parameter can be used to request either VIR_CPU_TYPE_HOST (which has
been assumed so far) or VIR_CPU_TYPE_GUEST definition.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
cpuNodeData has always been followed by cpuDecode as no hypervisor
driver is really interested in raw CPUID data for a host CPU. Let's
create a new CPU driver API which returns virCPUDefPtr directly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1431112
Yeah, that's right. A mount point doesn't have to be a directory.
It can be a file too. However, the code that tries to preserve
mount points under /dev for new namespace for qemu does not count
with that option.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
VIR_CONNECT_LIST_STORAGE_POOLS_VSTORAGE and
VIR_CONNECT_LIST_STORAGE_POOLS_ZFS were added to libvirt but the listing
API was not properly updated to use them.
https://bugzilla.redhat.com/show_bug.cgi?id=1431543
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
bhyve supports 'gop' video device that allows clients to connect
to VMs using VNC clients. This commit adds support for that to
the bhyve driver:
- Introducr 'gop' video device type
- Add capabilities probing for the 'fbuf' device that's
responsible for graphics
- Update command builder routines to let users configure
domain's VNC via gop graphics.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Extend domain capabilities XML with the information about
available UEFI firmware files. It searches in the location
that the sysutils/bhyve-firmware FreeBSD port installs
files to.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Allow to boot using UEFI rather than using an external boot loader
such as bhyveload or grub-bhyve.
Also, make LPC PCI-ISA bridge handling more flexible as now it's
needed not only for serial ports, but for bootrom as well.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Implement the BHACE_CAP_LPC_BOOTROM capability by checking the stderr
output of 'bhyve -l bootrom'. If the bootrom option is unsupported, this
will contain the following output:
bhyve: invalid lpc device configuration 'bootrom'
On newer bhyve versions that do support specifying a bootrom image, the
standard help will be printed.
Add a new test to fchosttest in order to test creation of our vHBA
via the Storage Pool logic. Unlike the real code, we cannot yet use
the virVHBA* API's because they (currently) traverse the file system
in order to get the parent vport capable scsi_host. Besides there's
no "real" NPIV device here - so we have to take some liberties, at
least for now.
Instead, we'll follow the node device tests partially in order to
create and destroy the vHBA with the test node devices.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1430634
If a qemu process has died, we get EOF on its monitor. At this
point, since qemu process was the only one running in the
namespace kernel has already cleaned the namespace up. Any
attempt of ours to enter it has to fail.
This really happened in the bug linked above. We've tried to
attach a disk to qemu and while we were in the monitor talking to
qemu it just died. Therefore our code tried to do some roll back
(e.g. deny the device in cgroups again, restore labels, etc.).
However, during the roll back (esp. when restoring labels) we
still thought that domain has a namespace. So we used secdriver's
transactions. This failed as there is no namespace to enter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the delivery of the DEVICE_DELETED event for the vCPU being deleted
would time out, the code would not call 'qemuDomainResetDeviceRemoval'.
Since the waiting thread did not unregister itself prior to stopping the
waiting the monitor code would try to wake it up instead of dispatching
it to the event worker. As a result the unplug process would not be
completed and the definition would not be updated.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1428893https://bugzilla.redhat.com/show_bug.cgi?id=1427801
This reverts commit c96bd78e4e.
So our code is one big mess and we modify domain definition while
building qemu_command line and our hotplug code share only part
of the parsing and command line building code. Let's revert
that change because to fix it properly would require refactor and
move a lot of things.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1430275
We should skip <listen type='socket'/> only if the 'socket' path
is specified because if there is no 'socket' path we need to
keep that element in migratable XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1366088
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When libvirtd is started we call qemuDomainRecheckInternalPaths
to detect whether a domain has VNC socket path generated by libvirt
based on option from qemu.conf. However if we are parsing status XML
for running domain the existing socket path can be generated also if
the config XML uses the new <listen type='socket'/> element without
specifying any socket.
The current code doesn't make difference how the socket was generated
and always marks it as "fromConfig". We need to store the
"autoGenerated" value in the status XML in order to preserve that
information.
The difference between "fromConfig" and "autoGenerated" is important
for migration, because if the socket is based on "fromConfig" we don't
print it into the migratable XML and we assume that user has properly
configured qemu.conf on both hosts. However if the socket is based
on "autoGenerated" it means that a new feature was used and therefore
we need to leave the socket in migratable XML to make sure that if
this feature is not supported on destination the migration will fail.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Split apart and rename qemuDomainGetChardevTLSObjects in order to make a
more generic API that can create the TLS JSON prop objects (secret and
tls-creds-x509) to be used to create the objects
Signed-off-by: John Ferlan <jferlan@redhat.com>
Create a qemuDomainAddChardevTLSObjects which will encapsulate the
qemuDomainGetChardevTLSObjects and qemuDomainAddTLSObjects so that
the callers don't need to worry about the props.
Move the dev->type and haveTLS checks in to the Add function to avoid
an unnecessary call to qemuDomainAddTLSObjects
Signed-off-by: John Ferlan <jferlan@redhat.com>
Refactor the TLS object adding code to make two separate API's that will
handle the add/remove of the "secret" and "tls-creds-x509" objects including
the Enter/Exit monitor commands.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since qemuDomainObjExitMonitor can also generate error messages,
let's move it inside any error message saving code on error paths
for various hotplug add activities.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1379200
When we are restoring a domain from a saved image, or just
updating its XML in the saved image - we have to make sure that
the ABI guests sees will not change. We have a function for that
which reports errors. But for some reason if this function fails,
we call it again with slightly different argument. Therefore it
might happen that we overwrite the original error and leave user
with less helpful one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In an effort to be consistent with the source module, alter the function
prototypes to follow the similar style of source with the "type" on one
line followed by the function name and arguments on subsequent lines with
with argument getting it's own line.
Alter the format of the code to follow more recent style guidelines of
two empty lines between functions, function decls with "[static] type"
on one line followed by function name with arguments to functions each
on one line.
Move all the NWFilterObj API's into their own module virnwfilterobj
from the nwfilter_conf
Purely code motion at this point, plus adjustments to cleanly build.
Found by Coverity. Because there's an "if ((cur = strstr(base, "revision"))
!= NULL) {" followed by a "base = cur" coverity notes that 'base' could
then be NULL causing the return to the top of the "while ((tmp_base =
strstr(base, "processor")) != NULL) {" to have strstr deref a NULL 'base'
pointer because the setting of base at the bottom of the loop is unconditional.
Alter the code to set "base = cur" after processing each key. That will
"ensure" that base doesn't get set to NULL if both "cpu" and "revision"
do no follow a "processor".
While a /proc/cpuinfo file that has a "processor" key but with neither
a "cpu" nor a "revision" doesn't seem feasible, the code is written as if
it could happen, so we have to account for it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Calls to virFileReadAll after a VIR_ALLOC that return NULL all show
a memory leak since 'ret' isn't virSysinfoDefFree'd and normal path
"return ret" doesn't free outbuf.
Reported by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
$ virsh vol-clone /tmp/test.iso new.iso
error: Failed to clone vol from test.iso
error: internal error: Child process (/bin/qemu-img convert -f iso -O iso /tmp/test.iso /tmp/new.iso) unexpected exit status 1: qemu-img: Could not open '/tmp/test.iso': Unknown driver 'iso'
Map iso->raw before sending the format value to qemu-img
https://bugzilla.redhat.com/show_bug.cgi?id=972784https://bugzilla.redhat.com/show_bug.cgi?id=1419395
Whole implementations along with helper totalling screens of code were
conditionally compiled. That made the code totally unreadable and
untestable. Rename functions to have the architecture in the name so
that all can be compiled at the same time and introduce header to allow
testing them all.
Proposed formal coding conventions encourage defining typedefs for
vir[Blah] and vir[Blah]Ptr separately from the associated struct named
_vir[Blah]:
typedef struct _virBlah virBlah;
typedef virBlah *virBlahPtr;
struct _virBlah {
...
};
At some point in the past, I had submitted several patches using a
more compact style that I prefer, and they were accepted:
typedef struct _virBlah {
...
} virBlah, *virBlahPtr;
Since these are by far a minority among all struct definitions, this
patch changes all those definitions to reflect the style prefered by
the proposal so that there is 100% consistency.
After the system has been booted, it should not change.
Cache the return value of virSystemdHasMachined.
Allow starting and terminating machines with just one
DBus call, instead of three, reducing the chance of
the call timing out.
Also introduce a small function for resetting the cache
to be used in tests.
Both virSystemdTerminateMachine and virSystemdCreateMachine
propagate the error to tell between a non-systemd system
and a hard error.
In virSystemdGetMachineNameByPID both are treated the same,
but an error is ignored by the callers.
Split out the checks into a separate function.
Make common helpers testNetworkObjFindByUUID and testStoragePoolObjFindByUUID
which will replace the repeated patter for each to find objects by UUID.
As a bonus, the error message processing will also provide the failed uuidstr
rather than a generic error message.
Rather than have multiple places using the same pattern to find
a network by name using virNetworkObjFindByName, create a common
helper which will provide a consistent error message as well.
Rather than have continued repeated sequences of :
testDriverLock()
xxx = vir*ObjFindByName()
testDriverUnlock()
if (xxx == NULL) {
virReportError
goto cleanup;
}
Make some common helpers which will use the pattern and make a single
reference using a single common error message.
Altered for Interfaces, Storage Pools, Storage Volumes, and Node Devices.
For each the common error message can now also indicate which 'name' was
not found. For Storage Volumes, the "new" error will be more specific
rather than just invalid argument.
In an effort to be consistent with the source module, alter the function
prototypes to follow the similar style of source with the "type" on one
line followed by the function name and arguments on subsequent lines with
with argument getting it's own line.
Alter the format of the code to follow more recent style guidelines of
two empty lines between functions, function decls with "[static] type"
on one line followed by function name with arguments to functions each
on one line.
Now that we have some qemuSecurity wrappers over
virSecurityManager APIs, lets make sure everybody sticks with
them. We have them for a reason and calling virSecurityManager
API directly instead of wrapper may lead into accidentally
labelling a file on the host instead of namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The implementation matches virStringListFreeCount. The only difference
between the two functions is the ordering of their parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Changes in commit id 'dec6d9df' caused a compilation failure on a RHEL6
CI build environment. So just replace 'system' with 'syscap' as a name.
cc1: warnings being treated as errors
../../src/conf/node_device_conf.c: In function 'virNodeDevCapSystemParseXML':
../../src/conf/node_device_conf.c:1415: error: declaration of 'system' shadows a global declaration [-Wshadow]
In an effort to be consistent with the source module, alter the function
prototypes to follow the similar style of source with the "type" on one
line followed by the function name and arguments on subsequent lines with
with argument getting it's own line.
Alter the format of the code to follow more recent style guidelines of
two empty lines between functions, function decls with "[static] type"
on one line followed by function name with arguments to functions each
on one line.
Move all the NodeDeviceObj API's into their own module virnodedeviceobj
from the node_device_conf
Purely code motion at this point, plus adjustments to cleanly build.
AArch64 kernels are technically capable of running armv7l binaries.
Though some vendors disable this feature during kernel build, we
need to allow it in LXC.
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
All Intel Haswell processors (except Xeon E7 v3 with stepping >= 4) have
TSX disabled by microcode update. As not all CPUs are guaranteed to be
patched with microcode updates we need to explicitly disable TSX on
affected CPUs to avoid its accidental usage.
https://bugzilla.redhat.com/show_bug.cgi?id=1406791
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The static CPU model expansion is designed to return only canonical
names of all CPU properties. To maintain backwards compatibility libvirt
is stuck with different spelling of some of the features, but we need to
use the full expansion to get the additional spellings. In addition to
returning all spelling variants for all properties the full expansion
will contain properties which are not guaranteed to be migration
compatible. Thus, we need to combine both expansions. First we need to
call the static expansion to limit the result to migratable properties.
Then we can use the result of the static expansion as an input to the
full expansion to get both canonical names and their aliases.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Querying "host" CPU model expansion only makes sense for KVM. QEMU 2.9.0
introduces a new "max" CPU model which can be used to ask QEMU what the
best CPU it can provide to a TCG domain is.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
While query-cpu-model-expansion returns only boolean features on s390,
but x86_64 reports some integer and string properties which we are
interested in.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The build system for libvirt correctly detects the location of blkid
using PKG_CONFIG_PATH environment variable. The file blkid.pc states
that the include flags should be: 'Cflags: -I${includedir}/blkid' but
libvirt searches for blkid.h inside ${includedir}/blkid/blkid, which is
wrong. Until now, the compilation for libvirt succeeded because of pure
luck, as it had -I/usr/include as a CFLAG. This issue was faced while
compiling libvirt on Ubuntu 16.04.2 with bare minimum dev packages and a
custom compiled blkid kept in a non-standard $prefix.
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
virQEMUCapsHasPCIMultiBus() performs a version check on
the QEMU binary to figure out whether multiple buses are
supported, so to get the correct aliases assigned when
dealing with pSeries guests we need to spoof the version
accordingly in the test suite.
Due to the extra architecture-specific logic, it's already
necessary for users to call virQEMUCapsHasPCIMultiBus(),
so the capability itself is just a pointless distraction.
Our documentation states that the chardev logging file is truncated
unless append='on' is specified. QEMU also behaves the same way and
truncates the file unless we provide the argument. The new virlogd
implementation did not honor if the argument was missing and continued
to append to the file.
Truncate the file even when the 'append' attribute is not present to
behave the same with both implementations and adhere to the docs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1420205
This function is calling public APIs (virNodeDeviceLookupByName
etc.). That requires the driver lock to be unlocked and locked
again. If we, however, replace the public APIs calls with the
internal calls (that public APIs call anyway), we can drop the
lock/unlock exercise.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The 'nodes' is overwritten after the first usage and possibly leaked
if any code in the first set of parsing goes to error.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Arguably though, function returning only on success is a very
interesting, although quite impractical concept. Also, the errno isn't
and shouldn't be preserved in this case, since the errno can be directly
fed to the virReportSystemError.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
After eca76884ea in case of error in qemuDomainSetPrivatePaths()
in pretended start we jump to stop. I've changed this during
review from 'cleanup' which turned out to be correct. Well, sort
of. We can't call qemuProcessStop() as it decrements
driver->nactive and we did not increment it. However, it calls
virDomainObjRemoveTransientDef() which is basically the only
function we need to call. So call that function and goto cleanup;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The API is useful for creating virCPUData in a hypervisor driver from
data we got by querying the hypervisor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The API is useful for creating virCPUData in a hypervisor driver from
data we got by querying the hypervisor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The API is useful for creating virCPUData in a hypervisor driver from
data we got by querying the hypervisor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The CPU driver provides APIs to create and free virCPUDataPtr. Thus all
APIs exported from the driver should work with that rather than
requiring the caller to pass a pointer to an internal part of the
structure.
In other words
virCPUx86DataAddCPUID(cpudata, &cpuid)
is much better than the original
virCPUx86DataAddCPUID(&cpudata->data.x86, &cpuid)
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The new API is called virCPUDataFree. Individual CPU drivers are no
longer required to implement their own freeing function unless they need
to free architecture specific data from virCPUData.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Our documentation of the domain capabilities XML says that the fallback
attribute of a CPU model is used to indicate whether the CPU model was
detected by libvirt itself (fallback="allow") or by asking the
hypervisor (fallback="forbid"). We need to properly set
fallback="forbid" when CPU model comes from QEMU to match the
documentation.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This will eventually replace virQEMUBuildBufferEscapeComma, however
it's not possible right now. Some parts of the code that uses the
old function needs to be refactored.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The port is stored in graphics configuration and it will
also get released in qemuProcessStop in case of error.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1397440
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Previously the code called virStorageSourceUpdateBlockPhysicalSize which
did not do anything on empty drives since it worked only on block
devices. After the refactor in c5f6151390 it's called for all devices
and thus attempts to deref the NULL path of empty drives.
Add a check that skips the update of the physical size if the storage
source is empty.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1420718
Fix incorrect jump labels in error paths as the stop jump is only
needed if the driver has already changed the state. For example
'virAtomicIntInc(&driver->nactive)' will be 'reverted' in the
qemuProcessStop call.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When a domain needs an access to some device (be it a disk, RNG,
chardev, whatever), we have to allow it in the devices CGroup (if
it is available), because by default we disallow all the devices.
But some of the functions that are responsible for setting up
devices CGroup are lacking check whether there is any CGroup
available. Thus users might be unable to hotplug some devices:
virsh # attach-device fedora rng.xml
error: Failed to attach device from rng.xml
error: internal error: Controller 'devices' is not mounted
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In GCC 7 there is a new warning triggered when a switch
case has a conditional statement (eg if ... else...) and
some of the code paths fallthrough to the next switch
statement. e.g.
conf/domain_conf.c: In function 'virDomainChrEquals':
conf/domain_conf.c:14926:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (src->targetTypeAttr != tgt->targetTypeAttr)
^
conf/domain_conf.c:14928:5: note: here
case VIR_DOMAIN_CHR_DEVICE_TYPE_CONSOLE:
^~~~
conf/domain_conf.c: In function 'virDomainChrDefFormat':
conf/domain_conf.c:22143:12: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (def->targetTypeAttr) {
^
conf/domain_conf.c:22151:5: note: here
default:
^~~~~~~
GCC introduced a __attribute__((fallthrough)) to let you
indicate that this is intentionale behaviour rather than
a bug.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
One of the conditions in qemuDomainDeviceCalculatePCIConnectFlags
was missing a break that could result it in falling through to
an incorrect codepath.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libxl code was checking that a 'char *' was != '\0', instead
of checking the first element in the string
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
GCC 7 gets upset by
if (!tmp && (size * count))
warning
util/viralloc.c: In function 'virReallocN':
util/viralloc.c:246:23: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]
if (!tmp && (size * count)) {
~~~~~~^~~~~~~~
Keep it happy by adding != 0 to the right hand expression
so it realizes we really are wanting to treat the result
of the arithmetic expression as a boolean
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Current code for example can call unsubscribe if connection
succeeds but subscribing fails. This will probabaly lead
only to spurious error messages without any actual inconsistencies
but nevertheless.
qemuDomainAssignPCIAddresses() hardcoded the assumption
that the only way to support devices on a non-zero bus is
to add one or more pci-bridges; however, since we now
support a large selection of PCI controllers that can be
used instead, the assumption is no longer true.
Moreover, this check was always redundant, because the
only sensible time to check for the availability of
pci-bridge is when building the QEMU command line, and
such a check is of course already in place.
In fact, there were *two* such checks, but since one of
the two was relying on the incorrect assumption explained
above, and it was redundant anyway, it has been dropped.
When switching over the values in the virDomainControllerModelPCI
enumeration, make sure the proper cast is in place so that the
compiler can warn us when the coverage is not exaustive.
For the same reason, remove the 'default' case from one of the
existing switch statements.
When switching over the values in the virDomainControllerModelPCI
enumeration, make sure the proper cast is in place so that the
compiler can warn us when the coverage is not exaustive.
For the same reason, fold some unstructured checks (performed by
comparing directly against some values in the enumeration) inside
an existing switch statement.
The switch in virDomainPCIControllerModelToConnectType()
had some code that, while techically part of the
_PCIE_SWITCH_DOWNSTREAM_PORT case, was in fact dead due
to the early return.
Get rid of the dead code, and fix the inaccurate function
description while at it.
virCPUDef.arch is not required to be filled in for guest CPU
definitions. It doesn't make sense to artificially mandate it to be set
when cpuDecode is called especially when virCPUData.arch passed to
cpuDecode already contains the architecture.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The CPU model info formating code in virQEMUCapsFormatCache will get
more complicated soon. Separating the code in
virQEMUCapsFormatHostCPUModelInfo will make the result easier to read.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
All features the function is currently supposed to filter out are
specific to x86_64. We should avoid removing them on other
architectures. It seems to be quite unlikely other achitectures would
use the same names, but one can never be sure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The 'raw' block driver in Qemu is not directly interesting from
libvirt's perspective, but it can be layered above some other block
drivers and this may be interesting for the user.
The patch adds support for the 'raw' block driver. The driver is treated
simply as a pass-through and child driver in JSON is queried to get the
necessary information.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Split virStorageSourceParseBackingJSON into two functions so that the
core can be reused by other functions. The new function called
virStorageSourceParseBackingJSONInternal accepts virJSONValuePtr.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Add a new storage driver registration function that will force the
backend code to fail if any of the storage backend modules can't be
loaded. This will make sure that they work and are present.
If driver modules are enabled turn storage driver backends into
dynamically loadable objects. This will allow greater modularity for
binary distributions, where heavyweight dependencies as rbd and gluster
can be avoided by selecting only a subset of drivers if the rest is not
necessary.
The storage modules are installed into 'LIBDIR/libvirt/storage-backend/'
and users can override the location by using
'LIBVIRT_STORAGE_BACKEND_DIR' environment variable.
rpm based distros will at this point install all the backends when
libvirt-daemon-driver-storage package is installed.
Our virSomeEnumTypeFromString() functions return either the value
of item from the enum or -1 on error. Usually however the value 0
means 'this value is not set in the domain XML, use some sensible
default'. Therefore, we don't accept corresponding string in
domain XML, for instance:
<memoryBacking>
<source mode="none"/>
<access mode="default"/>
<allocation mode="none"/>
</memoryBacking>
should be rejected as invalid XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rather than the inlined VIR_FREE's, use a cleanup: label... Fixes an
issue introduced by 03346def where @name was free'd before usage in
a virAsprintf to format scsi_host_name.
The functions in virCommand() after fork() must be careful with regard
to accessing any mutexes that may have been locked by other threads in
the parent process. It is possible that another thread in the parent
process holds the lock for the virQEMUDriver while fork() is called.
This leads to a deadlock in the child process when
'virQEMUDriverGetConfig(driver)' is called and therefore the handshake
never completes between the child and the parent process. Ultimately
the virDomainObjectPtr will never be unlocked.
It gets much worse if the other thread of the parent process, that
holds the lock for the virQEMUDriver, tries to lock the already locked
virDomainObject. This leads to a completely unresponsive libvirtd.
It's possible to reproduce this case with calling 'virsh start XXX'
and 'virsh managedsave XXX' in a tight loop for multiple domains.
This commit fixes the deadlock in the same way as it is described in
commit 61b52d2e38.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Similarly to domainSetGuestVcpus this commit adds API which allows to
modify state of individual vcpus rather than just setting the count.
This allows to enable CPUs in specific guest NUMA nodes to achieve any
necessary configuration.
With that users could access files outside /dev/shm. That itself
isn't a security problem, but might cause some errors we want to
avoid. So let's forbid slashes as we do with domain and volume names
and also mention that in the schema.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1395496
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add APIs that allow to dynamically register driver backends so that the
list of available drivers does not need to be known during compile time.
This will allow us to modularize the storage driver on runtime.
Pass the registration function name to virDriverLoadModule so that we
can later call specific functions if necessary (e.g. for testing
purposes). This gets rid of the rather ugly automatic name generator and
unifies the code to load/initialize the modules.
It's also clear which registration function gets called.
The niothreadids struct field is size_t, so must use %zu not %lu
with printf. While they're identical on some platforms, on others
they are different, causing warnings
conf/domain_conf.c: In function 'virDomainDefCheckABIStabilityFlags':
conf/domain_conf.c:19575:26: error: format '%lu' expects argument of type 'long unsigned int', but argument 7 has type 'size_t {aka unsigned int}' [-Werror=format=]
_("Target domain iothreads count %lu does not "
^
conf/domain_conf.c: In function 'virDomainDefFormatInternal':
conf/domain_conf.c:23915:46: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t {aka unsigned int}' [-Werror=format=]
virBufferAsprintf(buf, "<iothreads>%lu</iothreads>\n",
^
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This follows the same check for disk, because we cannot remove iothread
if it's used by disk or by controller. It could lead to crashing QEMU.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If virDomainDelIOThread API was called with VIR_DOMAIN_AFFECT_LIVE
and VIR_DOMAIN_AFFECT_CONFIG and both XML were already a different
it could result in removing iothread from config XML even if there
was a disk using that iothread.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The situation covered by the removed code will not ever happen.
This code is called only while starting a new QEMU process where
the capabilities where already checked and while attaching to
existing QEMU process where we don't even detect the iothreads.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The utils code should stay separated from other code (except for very
well justified cases). Unfortunately commit 272769becc
made it trivial to break the separation (and not get slapped by the
syntax-check rule) by adding -I src/conf to the CFLAGS for utils.
Remove this shortcut and except the two offenders from the syntax check
so that the codebase can be kept separated.
The comment was actually wrong as
https://www.freedesktop.org/software/systemd/man/udev_new.html#
mentions that on failure NULL is returned. Also the same return value
is checked in src/interface/interface_backend_udev.c already.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
When enabling virgl, qemu opens /dev/dri/render*. So far, we are
not allowing that in devices CGroup nor creating the file in
domain's namespace and thus requiring users to set the paths in
qemu.conf. This, however, is suboptimal as it allows access to
ALL qemu processes even those which don't have virgl configured.
Now that we have a way to specify render node that qemu will use
we can be more cautious and enable just that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far, qemuDomainGetHostdevPath has no knowledge of the reasong
it is called and thus reports /dev/vfio/vfio for every VFIO
backed device. This is suboptimal, as we want it to:
a) report /dev/vfio/vfio on every addition or domain startup
b) report /dev/vfio/vfio only on last VFIO device being unplugged
If a domain is being stopped then namespace and CGroup die with
it so no need to worry about that. I mean, even when a domain
that's exiting has more than one VFIO devices assigned to it,
this function does not clean /dev/vfio/vfio in CGroup nor in the
namespace. But that doesn't matter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
So far, we are allowing /dev/vfio/vfio in the devices cgroup
unconditionally (and creating it in the namespace too). Even if
domain has no hostdev assignment configured. This is potential
security hole. Therefore, when starting the domain (or
hotplugging a hostdev) create & allow /dev/vfio/vfio too (if
needed).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Since these two functions are nearly identical (with
qemuSetupHostdevCgroup actually calling virCgroupAllowDevicePath)
we can have one function call the other and thus de-duplicate
some code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
There's no need for this function. Currently it is passed as a
callback to virSCSIVHostDeviceFileIterate(). However, SCSI host
devices have just one file path. Therefore we can mimic approach
used in qemuDomainGetHostdevPath() to get path and call
virCgroupAllowDevicePath() directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
There's no need for this function. Currently it is passed as a
callback to virSCSIDeviceFileIterate(). However, SCSI devices
have just one file path. Therefore we can mimic approach used in
qemuDomainGetHostdevPath() to get path and call
virCgroupAllowDevicePath() directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
There's no need for this function. Currently it is passed as a
callback to virUSBDeviceFileIterate(). However, USB devices have
just one file path. Therefore we can mimic approach used in
qemuDomainGetHostdevPath() to get path and call
virCgroupAllowDevicePath() directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Add a test that allows providing the parent fabric_wwn in the input XML
in order to create the vHBA.
This also fixes a mixed setting of the fabric_wwn field from the read
test driver XML strings.
Rework the code to perform the various searches by parent, parent_wwnn/
parent_wwpn, parent_fabric_wwn, or vport capable in order to return the
'parent_host' number that is vHBA capable.
The former virNodeDeviceGetParentHost is renamed to add the ByParent
on it fixes an issue where if no parent was supplied in the XML to
create the vHBA, then virNodeDeviceFindByName was called with a NULL
second parameter which had bad results.
The reworked code will make the various calls to fetch the NPIV host
by the passed parameter options or if none are provided find a vport
capable NPIV HBA to perform the create. If the call is from the delete
path, then this option won't be allowed.
Each of virNodeDeviceGetParentHostBy* functions is now static, so
remove them external definitions.
A secondary benefit of this is the test_driver now can make use of
the new API to add some new tests to test the various creation options.
While perhaps improbable, it could be possible that after finding our
object that another thread running essentially in parallel could attempt
to delete the same vHBA.
So rather than dropping the lock right after finding the object, keep
the lock around while we drop the object lock and work on deleting the
object. Once the delete occurs we can safely drop the driver lock again.
Cleanup some of the usage of cleanup instead out for the goto label.
Create a virscsihost.c and place the functions there. That removes the
last #ifdef __linux__ from virutil.c.
Take the opporunity to also change the function names and in one case
the parameters slightly
Use the new virNodeDeviceGetParentName instead. Modify the callers to
build the node device scsi_host# name string in order to call the new
function so that proper lookup occurs.
Rather than have them mixed in with the virutil apis, create a separate
virvhba.c module and move the vHBA related calls into there. Soon there
will be more added.
Also modify the names of the functions and some arguments to be more
indicative of what is really happening. Adjust the callers respectively.
While I was changing fchosttest, rather than the non-descriptive names
test1...test6, rename them to match what the test is doing.
Modify the code to react more like a real HBA -> vHBA creation.
Currently the code would just modify the input XML definition to
set the name to a wwpn and then modify the scsi_host capability
entry for the defintion to change the scsi_host# and unique_id
before adding that into the node device.
This patch does things a bit better. It finds and copies a known
existing vHBA (scsi_host11) in the node_device database and modifies
that definition to change the name to scsi_host12 and set the wwnn/
wwpn to what the input XML would expect before adding the def to the
node device object list.
Then rather than create a returned "dev" using the (poorly) mocked
name - perform the lookup using the new device name.
Rather than inline the dummy creation of a vHBA to add to the node
devices - create a helper to do that work.
Also just tidy up a couple of things while at it...
Predefine a second NPIV capable HBA as well as a vHBA using the first
NPIV capable HBA. This will allow for a mechanism to perform more
realistic create vHBA testing.
Alter "test-scsi-host-vport" to be "scsi_host1" to match the real
environment. This is the vport capable HBA - IOW the NPIV device.
Add more fields to scsi_host1 as well.
Alter the XML being used by the objecttest to create a vHBA in order
to match the scsi_host1 parent name and to use validateable wwnn/wwpn.
This will allow for realistic testing.
Build fails with:
conf/node_device_conf.c:825:62: error: comparison of unsigned enum expression < 0 is always false [-Werror,-Wtautological-compare]
if ((data->drm.type = virNodeDevDRMTypeFromString(type)) < 0) {
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~
conf/node_device_conf.c:1801:59: error: comparison of unsigned enum expression < 0 is always false [-Werror,-Wtautological-compare]
if ((type = virNodeDevDevnodeTypeFromString(tmp)) < 0) {
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~
2 errors generated.
Fix by using intermediate variable to store the result similarly
to how it's done for other FromString* calls.
