Refactoring the method signatures in preparation for
checking boot index of the mediated devices.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Changing the error messages to report the problem encountered.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Moving the hostdev boot support validation from the command line
generator code into the domain validation code.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Adding a failure test for booting from a vhost scsi hostdev device.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At two places we are open coding xdr_free():
remoteRelayDomainEventTunable() and
remoteRelayDomainEventJobCompleted().
Bot of these functions use make_nonnull_domain() to put domain
IDs tuple into return structure and then continue encoding the
rest of structure. If that fails, they call VIR_FREE() directly.
While this okay, we should use xdr_free() which frees the whole
return structure for us.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If there's a problem in encoding @ret (for instance
virTypedParamsSerialize() fails) then @ret is leaked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The same way we check for limits when decoding typed parameters
(virTypedParamsDeserialize()) we should do the same check when
serializing them so that we don't put onto the wire more than our
limits allow. Surprisingly, we were doing so explicitly in some
places but not all of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The return structure is a bit complicated and that's why it is
very easy to check for RPC limits incorrectly. The structure is
an array of remote_domain_stats_record structures with the limit
of REMOTE_DOMAIN_LIST_MAX. The latter structure then poses a
different limit on typed params:
REMOTE_CONNECT_GET_ALL_DOMAIN_STATS_MAX (which is what we are
checking for mistakenly).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Commit f15789ec added support for setting postcopy migration bandwidth to
the migrate subcommand. This change does the same for precopy migration.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a libvirt error occurred during a test, then virTestRun()
reports it (regardless of test returning success or failure).
For instance, in this specific case, a hostdev is detached twice
and the second attempt is expected to fail. It does fail and
libvirt error is reported which is then printed onto stderr.
Insert virResetLastError() calls on appropriate places to avoid
that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In this test there is this macro CHECK_LIST_COUNT() which checks
if a list of PCI devices contains expected count. If it doesn't
an error is reported and 'goto cleanup' is invoked. There's no
real reason for that as even since its introduction there is no
cleanup done and all 'cleanup' labels contain nothing but
'return'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are few functions called from the test which return an
integer but their retval is compared as if it was a pointer.
Now, there is nothing wrong with that from machine POV, but
from readability perspective it's wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the previous commit, VIR_TEST_VERBOSE should put
'\n' at the end of each call so that the output is not broken.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is an inconsistency with VIR_TEST_DEBUG() calls. One half
(roughly) of calls does have the newline character the other one
doesn't. Well, it doesn't have it because it assumed blindly that
new line will be printed, which is not the case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in v3.0.0-rc1~336, the commit message doesn't really
justifies the expensive domain def copy creation. Now, that
vm->def is guarded in this function by job acquirement we can use
vm->def directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These two functions work with vm->def in their critical sections
(i.e. after the job was acquired and before it is released). But
that means, they need QUERY domain job too to prevent vm->def
change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The remote client invokes the 'nc' binary on the remote server to tunnel
access to the socket. As such the 'nc' binary needs to be pulled in only
by the libvirt-daemon sub-RPM, not the libvirt-client sub-RPM.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'nc' RPM does not in fact exist anymore, this is a virtual provide
from the nmap-ncat RPM which the maintainer wishes to delete. Change the
dep to use the actual binary path we want to invoke.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently during RPM upgrade we restart libvirtd and unconditionally
enable use of systemd socket activation for the UNIX sockets.
If the user had previously given the --listen arg to libvirtd though,
this will no longer be honoured if socket activation is used.
We could start libvirtd-tcp.socket or libvirtd-tls.socket for this,
but mgmt tools like puppet/ansible might not be expecting this.
So for now we silently disable socket activation if we see --listen
was previously set on the host.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When using systemd socket activation the --listen arg has no
effect. This is confusing to users upgrading from previous versions of
libvirt as their config is silently ignored. Turn use of --listen into a
fatal error when sockets are passed from systemd.
This helps the admin discover the change in behaviour and thus decide
whether to stick with socket activation or revert to previous behaviour.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We need to give users the ability to customize the length of the
shutdown timeout, or even disable timeouts entirely. Thus we must move
the timeout arg into the sysconf file, instead of the service unit.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To facilitate upgrades from earlier versions of libvirt which did not
use socket activation for libvirtd, we want to allow the libvirtd socket
units to be disabled (masked). This can only be supported if we use the
weaker Wants statement instead of Requires.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use the %{_rundir} RPM variable to set the configure runstatedir
variable to /run.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Many distros have moved /var/run to /run with the introduction of
systemd. /var/run still exists as a symlink to /run, but its usage
is deprecated.
autoconf added a --runstatedir option back in 2013 but there's still no
new release of autoconf that includes this.
gnulib meanwhile added support to propagate this arg's value to
configmake.h, but it falls back to $localstatedir/run for autoconf 2.69
and older, which is what every distro today has.
To deal with this problem we add a --with-runstatedir arg that then sets
the $runstatedir env variable that future autoconf's --runstatedir arg
will also use. This finally enables $runstatedir to be pointed to /run.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All code using LOCALSTATEDIR "/run" is updated to use RUNSTATEDIR
instead. The exception is the remote driver client which still
uses LOCALSTATEDIR "/run". The client needs to connect to remote
machines which may not be using /run, so /var/run is more portable
due to the /var/run -> /run symlink.
Some duplicate paths in the apparmor code are also purged.
There's no functional change by default yet since both expressions
expand to the same value.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Creating various directories using $(runstatedir) instead of
$(localstatedir)/run.
There's no functional change by default yet since both expressions
expand to the same value.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If a systemd socket uses /var/run in its path, systemd prints a warning
at runtime
[ 15.139976] systemd[1]: /usr/lib/systemd/system/virtlockd.socket:5:
ListenStream= references a path below legacy directory /var/run/,
updating /var/run/libvirt/virtlockd-sock → /run/libvirt/virtlockd-sock;
please update the unit file accordingly.
This minimal change updates the socket unit files to honour the
$runstatedir path.
There's no functional change by default yet since both expressions
expand to the same value.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The recent cleanups allow us to clean up the code a bit.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
That way devstr will only be used for the device string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of getting the string then passing it to virCommand.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use separate variables for the chardev and the device.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reduce the scope of the variable to get it freed for every controller
processed.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Simplify the code by annotating all the temporary virBuffers
with VIR_AUTOCLEAN.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After the legacy xen driver was removed the libxl driver became
the only consumer of xenconfig. Move the few files in xenconfig
to the libxl driver and remove the directory.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Iimplements the new guest information API by querying requested
information via the guest agent.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function adds the complete filesystem information returned by the
qemu agent to an array of typed parameters with field names intended to
to be returned by virDomainGetGuestInfo()
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Since version 3.0, qemu has returned disk usage statistics in
guest-get-fsinfo. And since 3.1, it has returned information about the
disk serial number and device node of disks that are targeted by the
filesystem.
Unfortunately, the public API virDomainGetFSInfo() returns the
filesystem info using a virDomainFSInfo struct, and due to API/ABI
guarantees it cannot be extended. So this new information cannot
easily be added to the public API. However, it is possible to add this
new filesystem information to a new virDomainGetGuestInfo() API which
will be based on typed parameters and is thus more extensible.
In order to support these two use cases, I added an internal struct
which the agent code uses to return all of the new data fields. This
internal struct can be converted to the public struct at a cost of some
extra memory allocation.
In a following commit, this additional information will be used within
virDomainGetGuestInfo().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function queries timezone information within the guest and adds
the information to an array of typed parameters with field names
intended to be returned to virDomainGetGuestInfo()
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
