Detect the werror property on SCSI and virtio disks.
But clear it if the QEMU supports usb-storage device without it
also supporting this option for usb-storage.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
To demonstrate the move of these attributes from -drive to -device.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The Fedora rawhide job started failing with the latest container build.
Since we now have broad CI coverage on GitLab CI, there's not a strong
reason to continue using Travis for Linux jobs. Deleting the redundant
jobs is a better use of time than trying to debug the failure.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In previous commit:
commit e6afacb0fe
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Feb 12 12:26:11 2020 +0000
qemu: start/stop an event loop thread for domains
A bogus comment was added claiming we didn't need to shutdown the
event thread in the qemuProcessStop method, because this would be
done in the monitor EOF callback. This was wrong because the EOF
callback only runs in the case of a QEMU crash or a guest initiated
clean shutdown & poweroff. In the case where the libvirt admin
calls virDomainDestroy, the EOF callback never fires because we
have already unregistered the event callbacks. We must thus always
attempt to stop the event thread in qemuProcessStop.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For http/https URIs we need to preserve the query part as it may be
important to refer to the image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the storage source has the query part set, format it in the output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new attribute for holding the query part for http(s) disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
http, https, ftp, ftps, and tftp were not mentioned in the
documentation. Note that 'ssh' is still omitted as it's used only
internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we are refreshing the relative paths when doing the blockjobs we
no longer need to load them upfront when doing the snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Preservation of the relative relationship requires us to load the
backing store strings from the disk images. With blockdev we stopped
detecting the backing chain if it's specified in the XML so the relative
links were not loaded at that point. To preserve the functionality from
the pre-blockdev without accessing the backing chain unnecessarily
during VM startup we must refresh the relative links when relative
block commit or block pull is requested.
https://bugzilla.redhat.com/show_bug.cgi?id=1818655
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While it is impossible for VIR_ALLOC() to return an error, we
should be consistent with the rest of the code and not continue
initializing the virSecurityDeviceLabelDef structure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Even with GLib it is still possible for virQEMUCapsNew() to
return NULL because it calls virQEMUCapsInitialize() which is a
wrapper over pthread_once() which may fail. At least, we still
check for its retval. If it so happens that the virQEMUCapsNew()
fails and returns NULL, we should not dereference it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Unfortunately, yajl_free() is not NOP on NULL. It really does
expect a valid pointer. Therefore, check whether the pointer we
want to pass to it is NULL or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The documentation could confuse people to expect that CPU models with
usable='no' attribute are not usable at all on the current host. But
they cannot be only used without explicitly disabling some features.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The daemons are not supported on Win32 and therefore were not compiled
in that platform. However, with the daemon code sharing, all the code in
utils *is* compiled and it failed because `waitpid`, `fork`, and
`setsid` are not available. So, as before, let's not build them on
Win32 and make the code more portable by using existing vir* wrappers.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This new template provides a standardized place where environment
variables which are not static, but rather depend on the output of
some shell command, can be defined for later use. This pattern is
already used in libosinfo's GitLab CI integration.
Defining $MAKEFLAGS there means we don't need to call getconf over
and over, and the actual build steps don't end up drowned in the
noise.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The last usage of plain fork() was removed in v0.9.7-rc1~50, but
we forgot to update the syntax-check exemption list accordingly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Several daemons have similar code around general daemon startup code.
Let's move it into a file and share it among them.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the DCO check is run on an empty branch (ie one which has no commits
different from master), it throws an error due to trying to interpret
the empty string as a git commit SHA.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The quotes are forbidden only inside the value, but the value itself may
be enclosed in quotes. Fix the RNG schema and validator and add a test
case.
https://bugzilla.redhat.com/show_bug.cgi?id=1804750
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Running the code style syntax-check as part of the build jobs leads to
all jobs failing in the same way. Have a prebuild job for validating
syntax-check to catch code style problems upfront and thus avoid needing
to run all the build jobs.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>a
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This introduces a CI job for validating DCO sign-off in every commit
message. The CI jobs are not provided any information on what the
baseline commit for the branch was. We can't compare against the forked
repo's master branch, as there's no guarantee the user is keeping master
up2date in their fork. Thus we add the master upstream repo as a git
remote and identify the common ancestor.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For any given job there is a high likelihood that ccache will be able to
reuse previously built object files. This will result in faster build
pipelines in later updates.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Whenever there is a change to the translatable strings we need to push
a new libvirt.pot to weblate. This only needs to be done when code
merges into git master, so the job is restricted to that branch.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch adds x86_64 native CI jobs for all distros that we currently
build container images for. This is a superset of the Linux jobs run on
current Jenkins and Travis platforms.
The remaining missing platforms are FreeBSD and macOS, neither of which
can use the shared runner container based infrastructure.
We may add further native jobs in the future which are not x86_64 based,
if we get access to suitable hardware, thus the jobs all have an arch
prefix in their name, just like the cross-built jobs do.
As with the cross-arch builds, the native jobs are split into two
groups. One group is run in all situations, while the other group is
only run on the master branch, or branches with a name prefix
'ci-full-'. This avoids the build time getting too long when
developers are testing their code prior to submission, while keeping
full coverage of code that is merged.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This pulls in the mingw cross build jobs using Fedora 30 as a base,
matching what is done on Jenkins and Travis.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The pipeline UI will truncate the names of jobs after about 15
characters. As a result with the cross-builds, we truncate the
most important part of the job name. Putting the most important
part first is robust against truncation, and we can drop the
redundant "-cross" stub.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <skultety.erik@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we have nine different cross build jobs, but as we introduce
more native jobs this is going to result in a very long CI execution
time. For developers testing their personal branches under development
it is generally sufficient to just look at a couple of interesting
scenarios, namely 32-bit and big endian.
This splits the cross build jobs so that by default only the armv7
and s390x archs are built. The remainining archs are setup so that they
are only built for code on the master branch, which will have the effect
of doing post-merge testing. Developers can opt-in to full testing of
their pre-merge code by pushing it to a branch with a name prefix of
"ci-full-".
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Run the bare minimum build that is possible to create the docs, avoiding
compiling code which other jobs will deal with.
The generated website is published as an artifact and thus is browsable
by developers on build completion and can be downloaded as a zip file.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As we introduce more build jobs, it will be useful to have a grouping of
jobs to more easily visualize the results and potentially control build
ordering.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We don't need the full git history when running CI jobs. From a code POV
we only need the most recent commit, but we want to be able to run
checks on the commits too. In particular to validate the DCO signoff for
each commit.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To facilitate future jobs that will use FreeBSD
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 5540acb9a2 added a minimum size verification for the target
size of ppc64 NVDIMMs but forgot to remove a MAX() size check that
was being used in earlier reviews of that commit. The size
verification makes this check unneeded since we're making sure
that guestArea will always be at least equal to ppc64AlignSize.
Fixes: 5540acb9a2
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is the only instance of g_autofree change applicable for
qemu_agent.c
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This fixes a FreeBSD build error from
commit a11a0e6e84
Author: Rafael Fonseca <r4f4rfs@gmail.com>
Date: Tue Mar 24 17:14:30 2020 +0100
bhyve: move video default logic to driver
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Move the liveness check prior to the capability check. If the VM is
offline the capabilities are not initialized and thus we'd report the
wrong error.
https://bugzilla.redhat.com/show_bug.cgi?id=1812531
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The code attempting to clean up after a failed pull mode backup job
wrongly entered monitor but didn't clean up nor exit monitor due to a
logic bug. Fix the condition.
Introduced in a1521f84a5https://bugzilla.redhat.com/show_bug.cgi?id=1817327
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Move the liveness check prior to the capability check. If the VM is
offline the capabilities are not initialized and thus we'd report the
wrong error.
https://bugzilla.redhat.com/show_bug.cgi?id=1812531
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Host-model CPU definitions (and domain capabilities) will use the
original CPU models (without noTSX in their name) and explicitly disable
hle and rtm features. This way domains with host-model CPUs will be
migratable even to older versions of libvirt which do not support the
noTSX model variants.
The new models will be advertised in host capabilities and they may
be used explicitly with custom CPUs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The element specifies whether a particular CPU model can be used when
creating a CPU definition from raw CPUID/MSR data. The @host attribute
determines whether the CPU model can be used (host='on') for creating
CPU definition for host capabilities. Usability of the model for domain
capabilities and host-model CPU definitions is controlled by the @guest
attribute.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
