Functions like virDomainOpenConsole() and virDomainOpenChannel() accept
NULL as a dev_name parameter. Try using alias for the error message if
dev_name is not specified.
Before:
error: internal error: character device <null> is not using a PTY
After:
error: internal error: character device serial0 is not using a PTY
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The acl.html file includes aclperms.htmlinc which is generated.
However, acl.html is generated too from acl.html.tmp. And in fact,
this is the place where the aclperms file is needed. Fix the
dependency in Makefile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id '832a9256' adjusted the code to recognize when the default
type of "unknown" was provided as the format type and to use "dos" if
found. Since the pool is built with "dos" and it could cause some
confusion when formatting the XML after building by seeing "unknown"
in the output, let's just adjust the pool's setting to "dos" so that
subsequent formats will see the value.
Currently the grammar uses "none" for a "valid" Disk Storage Pool
format type; however, virStoragePoolFormatDisk uses "unknown" so
virt-xml-validate will fail to validate when "unknown" is found
By trying to lead the way of clean includes, I sorted the lines
alphabetically and that is a problem for mingw builds with gnulib.
As 'configmake.h' defines DATADIR and 'datatypes.h' transitively
includes 'winsock.h' that uses 'DATADIR' as a name for a struct,
it's enough to reorder those.
Even though this might be worked around in gnulib later on, this
fixes the build for now.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The type='scsi' parameter of an address element is ignored
if placed within a hostdev section, and rejected by the XML
schema used by virt-xml-validate. Remove it from the doc,
and correct a typo in the remaining address arguments.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Defining a domain with a SCSI disk attached via a hostdev
tag and a source address unit value longer than two digits
causes an error when editing the domain with virsh edit,
even if no changes are made to the domain definition.
The error suggests invalid XML, somewhere:
# virsh edit lmb_guest
error: XML document failed to validate against schema:
Unable to validate doc against /usr/local/share/libvirt/schemas/domain.rng
Extra element devices in interleave
Element domain failed to validate content
The virt-xml-validate tool fails with a similar error:
# virt-xml-validate lmb_guest.xml
Relax-NG validity error : Extra element devices in interleave
lmb_guest.xml:17: element devices: Relax-NG validity error :
Element domain failed to validate content
lmb_guest.xml fails to validate
The hostdev tag requires a source address to be specified,
which includes bus, target, and unit address attributes.
According to the SCSI Architecture Model spec (section
4.9 of SAM-2), a LUN address is 64 bits and thus could be
up to 20 decimal digits long. Unfortunately, the XML
schema limits this string to just two digits. Similarly,
the target field can be up to 32 bits in length, which
would be 10 decimal digits.
# lsscsi -xx
[0:0:19:0x4022401100000000] disk IBM 2107900 3.44 /dev/sda
# lsscsi
[0:0:19:1074872354]disk IBM 2107900 3.44 /dev/sda
# cat lmb_guest.xml
<domain type='kvm'>
<name>lmb_guest</name>
<memory unit='MiB'>1024</memory>
...trimmed...
<devices>
<controller type='scsi' model='virtio-scsi' index='0'/>
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='19' unit='1074872354'/>
</source>
</hostdev>
...trimmed...
Since the reference unit and target fields are used in
several places in the XML schema, create a separate one
specific for SCSI Logical Units that will permit the
greater length. This permits both the validation utility
and the virsh edit command to succeed when a hostdev
tag is included.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
The SCSI Architecture Model defines a logical unit address
as 64-bits in length, so change the field accordingly so
that the entire value could be stored.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
The address elements are all unsigned integers, so we should
use the appropriate print directive when printing it.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
The SCSI address element attributes bus, target, and unit are expected
to be positive values, so make sure no one provides a negative value since
the value is stored as an unsigned.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Rather than grabbing an arbitrary JSON value and then checking
if it has the right type, we might as well request the correct
type to begin with.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONIOProcessEvent)
(qemuMonitorJSONCommandWithFd, qemuMonitorJSONHandleGraphics)
(qemuMonitorJSONGetStatus, qemuMonitorJSONExtractCPUInfo)
(qemuMonitorJSONGetVirtType, qemuMonitorJSONGetBalloonInfo)
(qemuMonitorJSONGetMemoryStats)
(qemuMonitorJSONDevGetBlockExtent)
(qemuMonitorJSONGetOneBlockStatsInfo)
(qemuMonitorJSONGetAllBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacityOne)
(qemuMonitorJSONBlockStatsUpdateCapacity)
(qemuMonitorJSONGetBlockExtent)
(qemuMonitorJSONGetMigrationStatusReply)
(qemuMonitorJSONGetDumpGuestMemoryCapability)
(qemuMonitorJSONAddFd, qemuMonitorJSONQueryRxFilterParse)
(qemuMonitorJSONExtractChardevInfo)
(qemuMonitorJSONDiskNameLookupOne)
(qemuMonitorJSONDiskNameLookup)
(qemuMonitorJSONGetAllBlockJobInfo)
(qemuMonitorJSONBlockIoThrottleInfo, qemuMonitorJSONGetVersion)
(qemuMonitorJSONGetMachines, qemuMonitorJSONGetCPUDefinitions)
(qemuMonitorJSONGetCommands, qemuMonitorJSONGetEvents)
(qemuMonitorJSONGetKVMState, qemuMonitorJSONGetObjectTypes)
(qemuMonitorJSONGetObjectListPaths)
(qemuMonitorJSONGetObjectProps, qemuMonitorJSONGetTargetArch)
(qemuMonitorJSONGetMigrationCapabilities)
(qemuMonitorJSONGetStringArray, qemuMonitorJSONAttachCharDev)
(qemuMonitorJSONGetCPUx86Data, qemuMonitorJSONGetIOThreads)
(qemuMonitorJSONGetMemoryDeviceInfo): Use shorter idioms.
Signed-off-by: Eric Blake <eblake@redhat.com>
While working in qemu_monitor_json, I repeatedly found myself
getting a value then checking if it was an object. Add some
wrappers to make this task easier.
* src/util/virjson.c (virJSONValueObjectGetByType)
(virJSONValueObjectGetObject, virJSONValueObjectGetArray): New
functions.
(virJSONValueObjectGetString, virJSONValueObjectGetNumberInt)
(virJSONValueObjectGetNumberUint)
(virJSONValueObjectGetNumberLong)
(virJSONValueObjectGetNumberUlong)
(virJSONValueObjectGetNumberDouble)
(virJSONValueObjectGetBoolean): Simplify.
(virJSONValueIsNull): Change return type.
* src/util/virjson.h: Reflect changes.
* src/libvirt_private.syms (virjson.h): Export them.
* tests/jsontest.c (testJSONLookup): New test.
Signed-off-by: Eric Blake <eblake@redhat.com>
I was adding a JSON test, and was shocked to find out our parser
treated the input string of "1" as invalid JSON. It turns out
that YAJL specifically documents that it buffers input, and that
if the last input read could be a prefix to a longer token, then
you have to explicitly tell the parser that the buffer has ended
before that token will be processed.
It doesn't help that yajl 2 renamed the function from what it was
in yajl 1.
* src/util/virjson.c (virJSONValueFromString): Complete parse, in
case buffer ends in possible token prefix.
* tests/jsontest.c (mymain): Expose the problem.
Signed-off-by: Eric Blake <eblake@redhat.com>
When the block job would fail while watching it using the "--wait"
option for blockcopy, virsh would rather unhelpfully report:
$ virsh blockcopy vm hdc /tmp/raw.img --granularity 4096 --verbose --wait
Now in mirroring phase
Add a special case when the block job vanishes while waiting for it to
finish to improve the message:
$ virsh blockcopy vm hdc /tmp/raw.img --granularity 8192 --verbose --wait
error: Block Copy unexpectedly failed
There's a small formatting problem in the function. One line is
not correctly indented. Fix this.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This capability specifies that "virt" machine on ARM has PCI controller. Enabled when version is at least 2.3.0.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
If vm->def->cputune.nvcpupin is 0 in libxlDomainSetVcpuAffinities (as
seems to be the case on arm) then the VIR_FREE after cleanup: would be
operating on an uninitialised pointer in map.map.
Fix this by using libxl_bitmap_init and libxl_bitmap_dispose in the
appropriate places (like VIR_FREE, libxl_bitmap_dispose is also
idempotent, so there is no double free on exit from the loop).
libxl_bitmap_dispose is slightly preferable since it also sets
map.size back to 0, avoiding a potential source of confusion.
This fixes the crashes we've been seeing in the Xen automated tests on
ARM.
I had a glance at the handful of other users of libxl_bitmap and none
of them looked to have a similar issue.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
When a connection to the destination host during a p2p migration drops,
we know we will have to cancel the migration; it doesn't make sense to
waste resources by trying to finish the migration. We already do so
after sending "migrate" command to QEMU and we should do it while
waiting for drive mirrors to become ready too.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Checking status of all part of migration and aborting it when something
failed is a complex thing which makes the waiting loop hard to read.
This patch moves all the checks into a separate function similarly to
what was done for drive mirror loops.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of passing current job name to several functions which already
know what the current job is we can generate the name where we actually
need to use it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Once we start waiting for migration events instead of polling
query-migrate, priv->job.current will not be regularly updated anymore
because we will get the current status directly from the events. Thus
virDomainGetJob{Info,Stats} will have to query QEMU, but they can't just
blindly update priv->job.current structure. This patch introduces
qemuMigrationFetchJobStatus which just fills in a caller supplied
structure and makes qemuMigrationUpdateJobStatus a tiny wrapper around
it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Move common parts of qemuDomainGetJobInfo and qemuDomainGetJobStats into
a separate API (qemuDomainGetJobStatsInternal).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU_CAPS_SEAMLESS_MIGRATION capability says QEMU supports
SPICE_MIGRATE_COMPLETED event. Thus we can just drop all code which
polls query-spice and replace it with waiting for the event.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When libvirtd is restarted during migration, we properly cancel the
ongoing migration (unless it managed to almost finished before the
restart). But if we were also migrating storage using NBD, we would
completely forget about the running disk mirrors.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
"query-block-jobs" QMP command returns all running block jobs at once,
while qemuMonitorBlockJobInfo would only report one. This is not very
nice in case we need to check several block jobs. This patch refactors
the monitor code to always parse all block jobs and store them in a
hash.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
So that they can format private data (e.g., disk private data) stored
elsewhere in the domain object.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch reverts commit 76c61cdca2.
VIR_DOMAIN_DISK_MIRROR_STATE_ABORT says we asked for a block job to be
aborted rather than saying it was aborted. Let's just use
VIR_DOMAIN_DISK_MIRROR_STATE_NONE consistently whenever a block job
finishes since no caller depends on VIR_DOMAIN_DISK_MIRROR_STATE_ABORT
(anymore) to check whether a block job failed or it was cancelled.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Abort migration as soon as we detect that some of the disk mirrors
failed. There's no sense in trying to finish memory migration first.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of cancelling disk mirrors sequentially, let's just call
block-job-cancel for all migrating disks and then wait until all
disappear.
In case we cancel disk mirrors at the end of successful migration we
also need to check all block jobs completed successfully. Otherwise we
have to abort the migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
By switching block jobs to use domain conditions, we can drop some
pretty complicated code in NBD storage migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Because we are polling we may detect some errors after we asked QEMU for
migration status even though they occurred before. If this happens and
QEMU reports migration completed successfully, we would happily report
the migration succeeded even though we should have cancelled it because
of the other error.
In practise it is not a big issue now but it will become a much bigger
issue once the check for storage migration status is moved inside the
loop in qemuMigrationWaitForCompletion.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The wrapper is useful for calling qemuBlockJobEventProcess with the
event details stored in disk's privateData, which is the most likely
usage of qemuBlockJobEventProcess.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Complex jobs, such as migration, need to monitor several events at once,
which is impossible when each of the event uses its own condition
variable. This patch adds a single condition variable to each domain
object. This variable can be used instead of the other event specific
conditions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Well, if a server is being destructed, all underlying services and
their sockets should disappear with it. But due to bug in our
implementation this is not the case. Yes, we are closing the sockets,
but that's not enough. We must also:
1) Unregister them from the event loop
2) Unref the service for each socket
The last step is needed, because each socket callback holds a
reference to the service object. Since in the first step we are
unregistering the callbacks, they no longer need the reference.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Although highly unlikely, nobody says that virEventAddHandle()
can't return 0 as a handle to socket callback. It can't happen
with our default implementation since all watches will have value
1 or greater, but users can register their own callback functions
(which can re-use unused watch IDs for instance). If this is the
case, weird things may happen.
Also, there's a little bug I'm fixing too, upon
virNetSocketRemoveIOCallback(), the variable holding callback ID
was not reset. Therefore calling AddIOCallback() once again would
fail. Not that we are doing it right now, but we might.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When going through the code I've notice that
virNetSocketAddIOCallback() increases the reference counter of
@socket. However, its counter part RemoveIOCallback does not. It took
me a while to realize this disproportion. The AddIOCallback registers
our own callback which eventually calls the desired callback and then
unref the @sock. Yeah, a bit complicated but it works. So, lets note
this hard learned fact in a comment in RemoveIOCallback().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When setting up the daemon networking, new services are created. These
services then have sockets to listen on. Once created, the service
objects are added to corresponding server object. However, during that
process, server increases reference counter of the service object. So,
at the end of the function, we should decrease it again. This way the
service objects will have only 1 reference, but that's okay since
servers are the only objects having a reference.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1224233
Currently it's not possible to determine the difference between a
fatal memory allocation or failure to open/read the directory error
with a perhaps less fatal, I didn't find the "block" device in the
directory (which may be a disk entry without a block device).
In the case of the latter, we shouldn't cause failure to continue
searching in the caller (virStorageBackendSCSIFindLUs), rather we
should allow trying reading the next directory entry.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add `virsh migrate' option `--migrate-disks' that allows CLI user to
explicitly specify block devices to migrate.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1203032
Implement a `migrate_disks' parameters for the QEMU driver. This multi-
value parameter can be used to explicitly specify what block devices
are to be migrated using the NBD server. Tunnelled migration using NBD
is to be done.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
