Block job QMP commands with underscores rather than dashes were never
released in upstream qemu, (they were added, but modified in the same
release [1]), but a certain distro managed to backport the version in the
middle.
The change also slightly modified semantics for the abort command, which
made us have a lot of code which was only ever present in certain
downstream distros.
Clean the upstream code from the legacy cruft and support only the
upstream implementations.
[1] See qemu commit v1.0-2176-gdb58f9c060
Reviewed-by: Eric Blake <eblake@redhat.com>
No need to pass a @driver parameter since all that's done is deref
the @cfg especially since the only caller can just pass an already
referenced @cfg.
Also, looks like commit id '0298531b' at one time had a different
name for the API, so I took the liberty of fixing the comments too
since I would already be updating them for the @cfg variable.
In case of real migration (not migrating to file on save, dump etc)
migration info is not complete at time qemu finishes migration
in normal (non postcopy) mode. We need to update disks stats,
downtime info etc. Thus let's not expose this job status as
completed.
To archive this let's set status to 'qemu completed' after
qemu reports migration is finished. It is not visible as complete
job to clients. Cookie code on confirm phase will finally turn
job into completed. As we don't need more things to do when
migrating to file status is set to 'completed' as before
in this case.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When getting job info in case mirror does not reach ready phase
fetch mirror stats from qemu. Otherwise mirror stats are already
saved in current job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of checking stat.status let's set status to migrating
as soon as migrate command is send (waiting for completion
is a good place too).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Setting status to none has little value - getting job status
will not return even elapsed time.
After this patch getting job stats stays correct in a sence
it will not fetch migration stats because it consults
stats.status before doing the fetch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Let's introduce QEMU_DOMAIN_JOB_STATUS_POSTCOPY state for job.current->status
instead of checking job.current->stats.status. The latter can be changed
when fetching migration statistics. Moving state function from the variable
and leave only store function seems more managable.
This patch removes all state checking usage of stats except for
qemuDomainGetJobStatsInternal. This place will be handled separately.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch simply switches code from using VIR_DOMAIN_JOB_* to
introduced QEMU_DOMAIN_JOB_STATUS_*. Later this gives us freedom
to introduce states for postcopy and mirroring phases.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Neither @cfg nor (now) @driver is used in the API, so remove them
and mark @opaque as UNUSED.
NB: Commit id 'fa3c558596' dropped the unused @qemuCaps which was the
last consumer of @driver other than @cfg, but even @cfg was never used
even in the original implementation from commit id 'd987f63a'.
arm/aarch64 -M virt on KVM doesn't and will never work with standard
VGA card emulation. The recommended method is to use type=virtio, so
let's make it the default for video devices without an explicit type
set by the user.
https://bugzilla.redhat.com/show_bug.cgi?id=1404112
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Will be needed for future patches to pull the default video type
setting out of XML parsing routines.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We call qemuDomainGetMachineName on domain start. On first
start (after daemon start) pid is 0 and virSystemdGetMachineNameByPID
don't get called. But after domain shutting down pid became -1 so
on next start virSystemdGetMachineNameByPID is called and returned an error.
Error is ignored so it is not critical. But at least on my system
(systemd-219 with extra patches) systemd-machined is crashed on
this request.
This behaviour is triggered by eaf2c9f89.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Currently while parsing domain XML we clear the UNIX path if it matches
one of the auto-generated paths by libvirt. After that when the guest
is started new path is generated but the mode is also changed to "bind".
In the real-world use-case the mode should not change, it only happens
if a user provides a mode='connect' and path that matches one of the
auto-generated path or not provides a path at all.
Before *reconnect* feature was introduced there was no issue, but with
the new feature we need to make sure that it's used only with "connect"
mode, therefore we need to move the mode change into parsing in order
to have a proper error reported by validation code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When recreating folders with namespaces, the directory type was not
being handled at all. It's not special, we probably just didn't know
that that can be used as a volume path as well. The code failed
gracefully, but we want to allow that so that we can use <disk
type='dir'> in domains again.
Partially-resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1443434
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
At some places we either already have synchronous job or we just
released it. Also, some APIs might want to use this code without
having to release their job. Anyway, the job acquire code is
moved out to qemuDomainRemoveInactiveJob so that
qemuDomainRemoveInactive does just what it promises.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Otherwise longer domain names might generate paths that are too long
to be created. This follows what other parts of the code do as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1453194
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The reconnect attribute for chardev devices in QEMU is used to
configure the reconnect timeout in seconds. Setting '0' value disables
the reconnect functionality thus we don't allow to set '0' for QEMU.
To disable the reconnect user should use <reconnect enabled='no'/>.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1254971
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
And into DeviceDefValidate which is the expected place
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Use the new facility which allows to ignore failures in post parse
callbacks if they are not fatal so that VM configs are not lost if the
emulator binary is missing.
If qemuCaps can't be populated on daemon restart skip certain portions
of the post parse callbacks during config reload and re-run the callback
during VM startup.
This fixes VMs vanishing if the emulator binary was broken or
uninstalled and libvirtd was restarted.
qemuDomainControllerDefPostParse assigns the default USB controller
model when it was not specified by the user. Skip this step if @qemuCaps
is missing so that we don't fill wrong data. This will then be fixes by
re-running the post parse callback.
The domain post parse callback, domain address callback and the domain
device callback (for every single device) would each grab qemuCaps for
the current emulator. This is quite wasteful. Use the new callback to do
this just once.
We're storing the machine name in @priv but free it just in
qemuProcessStop, Therefore this may leak.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a preparation for following patches where we switch to
virFileCache for QEMU capabilities cache
The host arch will always remain the same but virCaps may change. Now
the host arch is stored while creating new qemu capabilities cache.
It removes the need to pass virCaps into virQEMUCapsCache*() functions.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
It's possible to have more than one unnamed virtio-serial unix channel.
We need to generate a unique name for each channel. Currently, we use
".../unknown.sock" for all of them. Better practice would be to specify
an explicit target path name; however, in the absence of that, we need
uniqueness in the names we generate internally.
Before the changes we'd get /var/lib/libvirt/qemu/channel/target/unknown.sock
for each instance of
<channel type='unix'>
<source mode='bind'/>
<target type='virtio'/>
</channel>
Now, we get vioser-00-00-01.sock, vioser-00-00-02.sock, etc.
Signed-off-by: Scott Garfinkle <seg@us.ibm.com>
It is more related to a domain as we might use it even when there is
no systemd and it does not use any dbus/systemd functions. In order
not to use code from conf/ in util/ pass machineName in cgroups code
as a parameter. That also fixes a leak of machineName in the lxc
driver and cleans up and de-duplicates some code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The original name didn't hint at the fact that PHBs are
a pSeries-specific concept.
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This patch addresses the same aspects on PPC the bug 1103314 addressed
on x86.
PCI expander bus creates multiple primary PCI busses, where each of these
busses can be assigned a specific NUMA affinity, which, on x86 is
advertised through ACPI on a per-bus basis.
For SPAPR, a PHB's NUMA affinities are assigned on a per-PHB basis, and
there is no mechanism for advertising NUMA affinities to a guest on a
per-bus basis. So, even if qemu-ppc manages to get some sort of multi-bus
topology working using PXB, there is no way to expose the affinities
of these busses to the guest. It can only be exposed on a per-PHB/per-domain
basis.
So patch enables NUMA node tag in pci-root controller on PPC.
The way to set the NUMA node is through the numa_node option of
spapr-pci-host-bridge device. However for the implicit PHB, the only way
to set the numa_node is from the -global option. The -global option applies
to all the PHBs unless explicitly specified with the option on the
respective PHB of CLI. The default PHB has the emulated devices only, so
the patch prevents setting the NUMA node for the default PHB.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that the multi-phb support series is in, work on the TODO at
qemuDomainGetMemLockLimitBytes() to arrive at the correct memlock limit
value.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
pSeries guests will soon be allowed to have multiple
PHBs (pci-root controllers), meaning the current check
on the controller index no longer applies to them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
pSeries guests will soon be allowed to have multiple
PHBs (pci-root controllers), which of course means that
all but one of them will have a non-zero index; hence,
we'll need to relax the current check.
However, right now the check is performed in the conf
module, which is generic rather than tied to the QEMU
driver, and where we don't have information such as the
guest machine type available.
To make this change of behavior possible down the line,
we need to move the check from the XML parser to the
drivers. Luckily, only QEMU and bhyve are using PCI
controllers, so this doesn't result in much duplication.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
When checking ABI stability between two domain definitions, we first
make migratable copies of them. However, we also asked for the guest CPU
to be updated, even though the updated CPU is supposed to be already
included in the original definitions. Moreover, if we do this on the
destination host during migration, we're potentially updating the
definition with according to an incompatible host CPU.
While updating the CPU when checking ABI stability doesn't make any
sense, it actually just worked because updating the CPU doesn't do
anything for custom CPUs (only host-model CPUs are affected) and we
updated both definitions in the same way.
Less then a year ago commit v2.3.0-rc1~42 stopped updating the CPU in
the definition we got internally and only the user supplied definition
was updated. However, the same commit started updating host-model CPUs
to custom CPUs which are not affected by the request to update the CPU.
So it still seemed to work right, unless a user upgraded libvirt 2.2.0
to a newer version while there were some domains with host-model CPUs
running on the host. Such domains couldn't be migrated with a user
supplied XML since libvirt would complain:
Target CPU mode custom does not match source host-model
The fix is pretty straightforward, we just need to stop updating the CPU
when checking ABI stability.
https://bugzilla.redhat.com/show_bug.cgi?id=1463957
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Obviously, old gcc-s ale sad when a variable shares the name with
a function. And we do have such variable (added in 4d8a914be0):
@mount. Rename it to @mountpoint so that compiler's happy again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The way we create devices under /dev is highly linux specific.
For instance we do mknod(), mount(), umount(), etc. Some
platforms are even missing some of these functions. Then again,
as declared in qemuDomainNamespaceAvailable(): namespaces are
linux only. Therefore, to avoid obfuscating the code by trying to
make it compile on weird platforms, just provide a non-linux stub
for qemuDomainAttachDeviceMknodRecursive(). At the same time,
qemuDomainAttachDeviceMknodHelper() which actually calls the
non-existent functions is moved under ifdef __linux__ block since
its only caller is in that block too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Currently, the only type of chardev that we create the backend
for in the namespace is type='dev'. This is not enough, other
backends might have files under /dev too. For instance channels
might have a unix socket under /dev (well, bind mounted under
/dev from a different place).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1462060
Just like in the previous commit, when attaching a file based
device which has its source living under /dev (that is not a
device rather than a regular file), calling mknod() is no help.
We need to:
1) bind mount device to some temporary location
2) enter the namespace
3) move the mount point to desired place
4) umount it in the parent namespace from the temporary location
At the same time, the check in qemuDomainNamespaceSetupDisk makes
no longer sense. Therefore remove it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1462060
When building a qemu namespace we might be dealing with bare
regular files. Files that live under /dev. For instance
/dev/my_awesome_disk:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2'/>
<source file='/dev/my_awesome_disk'/>
<target dev='vdc' bus='virtio'/>
</disk>
# qemu-img create -f qcow2 /dev/my_awesome_disk 10M
So far we were mknod()-ing them which is
obviously wrong. We need to touch the file and bind mount it to
the original:
1) touch /var/run/libvirt/qemu/fedora.dev/my_awesome_disk
2) mount --bind /dev/my_awesome_disk /var/run/libvirt/qemu/fedora.dev/my_awesome_disk
Later, when the new /dev is built and replaces original /dev the
file is going to live at expected location.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Currently, we silently assume that file we are creating in the
namespace is either a link or a device (character or block one).
This is not always the case. Therefore instead of doing something
wrong, claim about unsupported file type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Currently, we silently assume that file we are creating in the
namespace is either a link or a device (character or block one).
This is not always the case. Therefore instead of doing something
wrong, claim about unsupported file type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This function is going to be used on other places, so
instead of copying code we can just call the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1459592
In 290a00e41d I've tried to fix the process of building a
qemu namespace when dealing with file mount points. What I
haven't realized then is that we might be dealing not with just
regular files but also special files (like sockets). Indeed, try
the following:
1) socat unix-listen:/tmp/soket stdio
2) touch /dev/socket
3) mount --bind /tmp/socket /dev/socket
4) virsh start anyDomain
Problem with my previous approach is that I wasn't creating the
temporary location (where mount points under /dev are moved) for
anything but directories and regular files.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
vcpu properties gathered from query-hotpluggable cpus need to be passed
back to qemu. As qemu did not use the node-id property until now and
libvirt forgot to pass it back properly (it was parsed but not passed
around) we did not honor this.
This patch adds node-id to the structures where it was missing and
passes it around as necessary.
The test data was generated with a VM with following config:
<numa>
<cell id='0' cpus='0,2,4,6' memory='512000' unit='KiB'/>
<cell id='1' cpus='1,3,5,7' memory='512000' unit='KiB'/>
</numa>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1452053
In QEMU driver we can use virtlogd as stdio handler for source backend
of char devices if current QEMU is new enough and it's enabled in
qemu.conf. We should store this information while starting a guest
because the config option may change while the guest is running.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1431112
Imagine a FS mounted on /dev/blah/blah2. Our process of creating
suffix for temporary location where all the mounted filesystems
are moved is very simplistic. We want:
/var/run/libvirt/qemu/$domName.$suffix\
were $suffix is just the mount point path stripped of the "/dev/"
prefix. For instance:
/var/run/libvirt/qemu/fedora.mqueue for /dev/mqueue
/var/run/libvirt/qemu/fedora.pts for /dev/pts
and so on. Now if we plug /dev/blah/blah2 into the example we see
some misbehaviour:
/var/run/libvirt/qemu/fedora.blah/blah2
Well, misbehaviour if /dev/blah/blah2 is a file, because in that
case we call virFileTouch() instead of virFileMakePath().
The solution is to replace all the slashes in the suffix with say
dots. That way we don't have to care about nested directories.
IOW, the result we want for given example is:
/var/run/libvirt/qemu/fedora.blah.blah2
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1431112
There can be nested mount points. For instance /dev/shm/blah can
be a mount point and /dev/shm too. It doesn't make much sense to
return the former path because callers preserve the latter (and
with that the former too). Therefore prune nested mount points.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1431112
After 290a00e41d we know how to deal with file mount points.
However, when cleaning up the temporary location for preserved
mount points we are still calling rmdir(). This won't fly for
files. We need to call unlink(). Now, since we don't really care
if the cleanup succeeded or not (it's the best effort anyway), we
can call both rmdir() and unlink() without need for
differentiation between files and directories.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When making ABI stability checks for an active domain, we need to make
sure we use the same migratable definition which virDomainGetXMLDesc
with the MIGRATABLE flag provides, otherwise the ABI check will fail.
This is implemented in the new qemuDomainCheckABIStability which takes a
domain object and generates the right migratable definition from it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This patch separates the actual ABI checks from getting migratable defs
in qemuDomainDefCheckABIStability so that we can create another wrapper
which will use different methods to get the migratable defs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The main goal of this function is to enable reusing the parsing code
from qemuDomainDefCopy.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1459091
Currently, we are querying for vhostuser interface name in post
parse callback. At that time interface might not yet exist.
However, it has to exist when starting domain. Therefore it makes
more sense to query its name at that point. This partially
reverts 57b5e27.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If QEMU is new enough and we have the live updated CPU definition in
either save or migration cookie, we can use it to enforce ABI. The
original guest CPU from domain XML will be stored in private data.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Since the domain XML saved in a snapshot or saved image uses the
original guest CPU definition but we still want to enforce ABI when
restoring the domain if libvirt and QEMU are new enough, we save the
live updated CPU definition in a save cookie.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The destination host may not be able to start a domain using the live
updated CPU definition because either libvirt or QEMU may not be new
enough. Thus we need to send the original guest CPU definition.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When starting a domain we update the guest CPU definition to match what
QEMU actually provided (since it is allowed to add or removed some
features unless check='full' is specified). Let's store the original CPU
in domain private data so that we can use it to provide a backward
compatible domain XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This patch implements a new save cookie object and callbacks for qemu
driver. The actual useful content will be added in the object later.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This will be used later when a save cookie will become part of the
snapshot XML using new driver specific parser/formatter functions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1450349
Problem is, qemu fails to load guest memory image if these
attribute change on migration/restore from an image.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While checking for ABI stability, drivers might pose additional
checks that are not valid for general case. For instance, qemu
driver might check some memory backing attributes because of how
qemu works. But those attributes may work well in other drivers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The @meminfo allocated in qemuMonitorGetMemoryDeviceInfo() may be
lost when qemuDomainObjExitMonitor() failed.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Namely, this patch is about virMediatedDeviceGetIOMMUGroup{Dev,Num}
functions. There's no compelling reason why these functions should take
an object, on the contrary, having to create an object every time one
needs to query the IOMMU group number, discarding the object afterwards,
seems odd.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The QEMU default is GICv2, and some of the code in libvirt
relies on the exact value. Stop pretending that's not the
case and use GICv2 explicitly where needed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
There are currently some limitations in the emulated GICv3
that make it unsuitable as a default. Use GICv2 instead.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1450433
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Currently we consider all UNIX paths with specific prefix as generated
by libvirt, but that's a wrong assumption. Let's make the detection
better by actually checking whether the whole path matches one of the
paths that we generate or generated in the past.
The UNIX path isn't stored in config XML since libvirt-1.3.1.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1446980
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add kernel_irqchip=split/on to the QEMU command line
and a capability that looks for it in query-command-line-options
output. For the 'split' option, use a version check
since it cannot be reasonably probed.
https://bugzilla.redhat.com/show_bug.cgi?id=1427005
Even though there are several checks before calling this function
and for some scenarios we don't call it at all (e.g. on disk hot
unplug), it may be possible to sneak in some weird files (e.g. if
domain would have RNG with /dev/shm/some_file as its backend). No
matter how improbable, we shouldn't unlink it as we would be
unlinking a file from the host which we haven't created in the
first place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cedric Bosdonnat <cbosdonnat@suse.com>
Just like in previous commit, this fixes the same issue for
hotplug.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cedric Bosdonnat <cbosdonnat@suse.com>
While the code allows devices to already be there (by some
miracle), we shouldn't try to create devices that don't belong to
us. For instance, we shouldn't try to create /dev/shm/file
because /dev/shm is a mount point that is preserved. Therefore if
a file is created there from an outside (e.g. by mgmt application
or some other daemon running on the system like vhostmd), it
exists in the qemu namespace too as the mount point is the same.
It's only /dev and /dev only that is different. The same
reasoning applies to all other preserved mount points.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cedric Bosdonnat <cbosdonnat@suse.com>
Currently, all we need to do in qemuDomainCreateDeviceRecursive() is to
take given @device, get all kinds of info on it (major & minor numbers,
owner, seclabels) and create its copy at a temporary location @path
(usually /var/run/libvirt/qemu/$domName.dev), if @device live under
/dev. This is, however, very loose condition, as it also means
/dev/shm/* is created too. Therefor, we will need to pass more arguments
into the function for better decision making (e.g. list of mount points
under /dev). Instead of adding more arguments to all the functions (not
easily reachable because some functions are callback with strictly
defined type), lets just turn this one 'const char *' into a 'struct *'.
New "arguments" can be then added at no cost.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cedric Bosdonnat <cbosdonnat@suse.com>
When setting up mount namespace for a qemu domain the following
steps are executed:
1) get list of mountpoints under /dev/
2) move them to /var/run/libvirt/qemu/$domName.ext
3) start constructing new device tree under /var/run/libvirt/qemu/$domName.dev
4) move the mountpoint of the new device tree to /dev
5) restore original mountpoints from step 2)
Note the problem with this approach is that if some device in step
3) requires access to a mountpoint from step 2) it will fail as
the mountpoint is not there anymore. For instance consider the
following domain disk configuration:
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/dev/shm/vhostmd0'/>
<target dev='vdb' bus='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</disk>
In this case operation fails as we are unable to create vhostmd0
in the new device tree because after step 2) there is no /dev/shm
anymore. Leave aside fact that we shouldn't try to create devices
living in other mountpoints. That's a separate bug that will be
addressed later.
Currently, the order described above is rearranged to:
1) get list of mountpoints under /dev/
2) start constructing new device tree under /var/run/libvirt/qemu/$domName.dev
3) move them to /var/run/libvirt/qemu/$domName.ext
4) move the mountpoint of the new device tree to /dev
5) restore original mountpoints from step 3)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cedric Bosdonnat <cbosdonnat@suse.com>
This is a USB3 controller and it's a better choice than piix3-uhci.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Acked-by: Andrea Bolognani <abologna@redhat.com>
The new logic will set the piix3-uhci if available regardless of
any architecture and it will be updated to better model based on
architecture and device existence.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Acked-by: Andrea Bolognani <abologna@redhat.com>
This patch maps /domain/cpu/cache element into -cpu parameters:
- <cache mode='passthrough'/> is translated to host-cache-info=on
- <cache level='3' mode='emulate'/> is transformed into l3-cache=on
- <cache mode='disable'/> is turned in host-cache-info=off,l3-cache=off
Any other <cache> element is forbidden.
The tricky part is detecting whether QEMU supports the CPU properties.
The 'host-cache-info' property is introduced in v2.4.0-1389-ge265e3e480,
earlier QEMU releases enabled host-cache-info by default and had no way
to disable it. If the property is present, it defaults to 'off' for any
QEMU until at least 2.9.0.
The 'l3-cache' property was introduced later by v2.7.0-200-g14c985cffa.
Earlier versions worked as if l3-cache=off was passed. For any QEMU
until at least 2.9.0 l3-cache is 'off' by default.
QEMU 2.9.0 was the first release which supports probing both properties
by running device-list-properties with typename=host-x86_64-cpu. Older
QEMU releases did not support device-list-properties command for CPU
devices. Thus we can't really rely on probing them and we can just use
query-cpu-model-expansion QMP command as a witness.
Because the cache property probing is only reliable for QEMU >= 2.9.0
when both are already supported for quite a few releases, we let QEMU
report an error if a specific cache mode is explicitly requested. The
other mode (or both if a user requested CPU cache to be disabled) is
explicitly turned off for QEMU >= 2.9.0 to avoid any surprises in case
the QEMU defaults change. Any older QEMU already turns them off so not
doing so explicitly does not make any harm.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Not all async jobs are visible via virDomainGetJobStats (either they are
too fast or getting the stats is not allowed during the job), but
forcing all of them to advertise the operation is easier than hunting
the jobs for which fetching statistics is allowed. And we won't need to
think about this when we add support for getting stats for more jobs.
https://bugzilla.redhat.com/show_bug.cgi?id=1441563
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We are currently parsing only rx/frames/max because that's the only
value that makes sense for us. The tun device just added support for
this one and the others are only supported by hardware devices which
we don't need to worry about as the only way we'd pass those to the
domain is using <hostdev/> or <interface type='hostdev'/>. And in
those cases the guest can modify the settings itself.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The history of USB controller for ppc64 guest is complex and goes
back to libvirt 1.3.1 where the fun started.
Prior Libvirt 1.3.1 if no model for USB controller was specified
we've simply passed "-usb" on QEMU command line.
Since Libvirt 1.3.1 there is a patch (8156493d8d) that fixes this
issue by using "-device pci-ohci,..." but it breaks migration with
older Libvirts which was agreed that's acceptable. However this
patch didn't reflect this change in the domain XML and the model
was still missing.
Since Libvirt 2.2.0 there is a patch (f55eaccb0c) that fixes the
issue with not setting the USB model into domain XML which we need
to know about to not break the migration and since the default
model was *pci-ohci* it was used as default in this patch as well.
This patch tries to take all the previous changes into account and
also change the default for newly defined domains that don't specify
any model for USB controller.
The VIR_DOMAIN_DEF_PARSE_ABI_UPDATE is set only if new domain is
defined or new device is added into a domain which means that in
all other cases we will use the old *pci-ohci* model instead of the
better and not broken *nec-usb-xhci* model.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1373184
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Introduce new wrapper functions without *Machine* in the function
name that take the whole virDomainDef structure as argument and
call the existing functions with *Machine* in the function name.
Change the arguments of existing functions to *machine* and *arch*
because they don't need the whole virDomainDef structure and they
could be used in places where we don't have virDomainDef.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This way qemuDomainLogContextRef() and qemuDomainLogContextFree() is
no longer needed. The naming qemuDomainLogContextFree() was also
somewhat misleading. Additionally, it's easier to turn
qemuDomainLogContext in a self-locking object.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Depending on the architecture, requirements for ACPI and UEFI can
be different; more specifically, while on x86 UEFI requires ACPI,
on aarch64 it's the other way around.
Enforce these requirements when validating the domain, and make
the error message more accurate by mentioning that they're not
necessarily applicable to all architectures.
Several aarch64 test cases had to be tweaked because they would
have failed the validation step otherwise.
Currently, if we want to zero out disk source (e,g, due to
startupPolicy when starting up a domain) we use
virDomainDiskSetSource(disk, NULL). This works well for file
based storage (storage type file, dir, or block). But it doesn't
work at all for other types like volume and network.
So imagine that you have a domain that has a CDROM configured
which source is a volume from an inactive pool. Because it is
startupPolicy='optional', the CDROM is empty when the domain
starts. However, the source element is not cleared out in the
status XML and thus when the daemon restarts and tries to
reconnect to the domain it refreshes the disks (which fails - the
storage pool is still not running) and thus the domain is killed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When idx is 0 virStorageFileChainLookup returns the base (bottom) of the
backing chain rather than the top. This is expected by the callers of
qemuDomainGetStorageSourceByDevstr.
Add a special case for idx == 0
For guests that use <memoryBacking><locked>, our only option
is to remove the memory locking limit altogether.
Partially-resolves: https://bugzilla.redhat.com/1431793
Instead of having a separate function, we can simply return
zero from the existing qemuDomainGetMemLockLimitBytes() to
signal the caller that the memory locking limit doesn't need
to be set for the guest.
Having a single function instead of two makes it less likely
that we will use the wrong value, which is exactly what
happened when we started applying the limit that was meant
for VFIO-using guests to <memoryBacking><locked>-using
guests.
This reverts commit c2e60ad0e5.
Turns out this check is excessively strict: there are ways
other than <memtune><hard_limit> to raise the memory locking
limit for QEMU processes, one prominent example being
tweaking /etc/security/limits.conf.
Partially-resolves: https://bugzilla.redhat.com/1431793
Since mdevs are just another type of VFIO devices, we should increase
the memory locking limit the same way we do for VFIO PCI devices.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
As goes for all the other hostdev device types, grant the qemu process
access to /dev/vfio/<mediated_device_iommu_group>.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
A mediated device will be identified by a UUID (with 'model' now being
a mandatory <hostdev> attribute to represent the mediated device API) of
the user pre-created mediated device. We also need to make sure that if
user explicitly provides a guest address for a mdev device, the address
type will be matching the device API supported on that specific mediated
device and error out with an incorrect XML message.
The resulting device XML:
<devices>
<hostdev mode='subsystem' type='mdev' model='vfio-pci'>
<source>
<address uuid='c2177883-f1bb-47f0-914d-32a22e3a8804'>
</source>
</hostdev>
</devices>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The code is currently simple, but if we later add node names, it will be
necessary to generate the names based on the node name. Add a helper so
that there's a central point to fix once we add self-generated node
names.
If the migration flags indicate this migration will be using TLS,
then set up the destination during the prepare phase once the target
domain has been started to add the TLS objects to perform the migration.
This will create at least an "-object tls-creds-x509,endpoint=server,..."
for TLS credentials and potentially an "-object secret,..." to handle the
passphrase response to access the TLS credentials. The alias/id used for
the TLS objects will contain "libvirt_migrate".
Once the objects are created, the code will set the "tls-creds" and
"tls-hostname" migration parameters to signify usage of TLS.
During the Finish phase we'll be sure to attempt to clear the
migration parameters and delete those objects (whether or not they
were created). We'll also perform the same reset during recovery
if we've reached FINISH3.
If the migration isn't using TLS, then be sure to check if the
migration parameters exist and clear them if so.
So, majority of the code is just ready as-is. Well, with one
slight change: differentiate between dimm and nvdimm in places
like device alias generation, generating the command line and so
on.
Speaking of the command line, we also need to append 'nvdimm=on'
to the '-machine' argument so that the nvdimm feature is
advertised in the ACPI tables properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
NVDIMM is new type of memory introduced into QEMU 2.6. The idea
is that we have a Non-Volatile memory module that keeps the data
persistent across domain reboots.
At the domain XML level, we already have some representation of
'dimm' modules. Long story short, NVDIMM will utilize the
existing <memory/> element that lives under <devices/> by adding
a new attribute 'nvdimm' to the existing @model and introduce a
new <path/> element for <source/> while reusing other fields. The
resulting XML would appear as:
<memory model='nvdimm'>
<source>
<path>/tmp/nvdimm</path>
</source>
<target>
<size unit='KiB'>523264</size>
<node>0</node>
</target>
<address type='dimm' slot='0'/>
</memory>
So far, this is just a XML parser/formatter extension. QEMU
driver implementation is in the next commit.
For more info on NVDIMM visit the following web page:
http://pmem.io/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1431112
Yeah, that's right. A mount point doesn't have to be a directory.
It can be a file too. However, the code that tries to preserve
mount points under /dev for new namespace for qemu does not count
with that option.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1430634
If a qemu process has died, we get EOF on its monitor. At this
point, since qemu process was the only one running in the
namespace kernel has already cleaned the namespace up. Any
attempt of ours to enter it has to fail.
This really happened in the bug linked above. We've tried to
attach a disk to qemu and while we were in the monitor talking to
qemu it just died. Therefore our code tried to do some roll back
(e.g. deny the device in cgroups again, restore labels, etc.).
However, during the roll back (esp. when restoring labels) we
still thought that domain has a namespace. So we used secdriver's
transactions. This failed as there is no namespace to enter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When libvirtd is started we call qemuDomainRecheckInternalPaths
to detect whether a domain has VNC socket path generated by libvirt
based on option from qemu.conf. However if we are parsing status XML
for running domain the existing socket path can be generated also if
the config XML uses the new <listen type='socket'/> element without
specifying any socket.
The current code doesn't make difference how the socket was generated
and always marks it as "fromConfig". We need to store the
"autoGenerated" value in the status XML in order to preserve that
information.
The difference between "fromConfig" and "autoGenerated" is important
for migration, because if the socket is based on "fromConfig" we don't
print it into the migratable XML and we assume that user has properly
configured qemu.conf on both hosts. However if the socket is based
on "autoGenerated" it means that a new feature was used and therefore
we need to leave the socket in migratable XML to make sure that if
this feature is not supported on destination the migration will fail.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Now that we have some qemuSecurity wrappers over
virSecurityManager APIs, lets make sure everybody sticks with
them. We have them for a reason and calling virSecurityManager
API directly instead of wrapper may lead into accidentally
labelling a file on the host instead of namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The functions in virCommand() after fork() must be careful with regard
to accessing any mutexes that may have been locked by other threads in
the parent process. It is possible that another thread in the parent
process holds the lock for the virQEMUDriver while fork() is called.
This leads to a deadlock in the child process when
'virQEMUDriverGetConfig(driver)' is called and therefore the handshake
never completes between the child and the parent process. Ultimately
the virDomainObjectPtr will never be unlocked.
It gets much worse if the other thread of the parent process, that
holds the lock for the virQEMUDriver, tries to lock the already locked
virDomainObject. This leads to a completely unresponsive libvirtd.
It's possible to reproduce this case with calling 'virsh start XXX'
and 'virsh managedsave XXX' in a tight loop for multiple domains.
This commit fixes the deadlock in the same way as it is described in
commit 61b52d2e38.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
When enabling virgl, qemu opens /dev/dri/render*. So far, we are
not allowing that in devices CGroup nor creating the file in
domain's namespace and thus requiring users to set the paths in
qemu.conf. This, however, is suboptimal as it allows access to
ALL qemu processes even those which don't have virgl configured.
Now that we have a way to specify render node that qemu will use
we can be more cautious and enable just that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far, qemuDomainGetHostdevPath has no knowledge of the reasong
it is called and thus reports /dev/vfio/vfio for every VFIO
backed device. This is suboptimal, as we want it to:
a) report /dev/vfio/vfio on every addition or domain startup
b) report /dev/vfio/vfio only on last VFIO device being unplugged
If a domain is being stopped then namespace and CGroup die with
it so no need to worry about that. I mean, even when a domain
that's exiting has more than one VFIO devices assigned to it,
this function does not clean /dev/vfio/vfio in CGroup nor in the
namespace. But that doesn't matter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
So far, we are allowing /dev/vfio/vfio in the devices cgroup
unconditionally (and creating it in the namespace too). Even if
domain has no hostdev assignment configured. This is potential
security hole. Therefore, when starting the domain (or
hotplugging a hostdev) create & allow /dev/vfio/vfio too (if
needed).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Since these two functions are nearly identical (with
qemuSetupHostdevCgroup actually calling virCgroupAllowDevicePath)
we can have one function call the other and thus de-duplicate
some code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The bare fact that mnt namespace is available is not enough for
us to allow/enable qemu namespaces feature. There are other
requirements: we must copy all the ACL & SELinux labels otherwise
we might grant access that is administratively forbidden or vice
versa.
At the same time, the check for namespace prerequisites is moved
from domain startup time to qemu.conf parser as it doesn't make
much sense to allow users to start misconfigured libvirt just to
find out they can't start a single domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
mknod() is affected my the current umask, so we're not
guaranteed the newly-created device node will have the
right permissions.
Call chmod(), which is not affected by the current umask,
immediately afterwards to solve the issue.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1421036
Just like we need wrappers over other virSecurityManager APIs, we
need one for virSecurityManagerSetImageLabel and
virSecurityManagerRestoreImageLabel. Otherwise we might end up
relabelling device in wrong namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Firstly, instead of checking for next->path the
virStorageSourceIsEmpty() function should be used which also
takes disk type into account.
Secondly, not every disk source passed has the correct type set
(due to our laziness). Therefore, instead of checking for
virStorageSourceIsBlockLocal() and also S_ISBLK() the former can
be refined to just virStorageSourceIsLocalStorage().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Again, one missed bit. This time without this commit there is no
/dev entry in the namespace of the qemu process when doing disk
snapshots or block-copy.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These functions do not need to see the whole virDomainDiskDef.
Moreover, they are going to be called from places where we don't
have access to the full disk definition. Sticking with
virStorageSource is more than enough.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There is no need for this. None of the namespace helpers uses it.
Historically it was used when calling secdriver APIs, but we
don't to that anymore.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In order for memory locking to work, the hard limit on memory
locking (and usage) has to be set appropriately by the user.
The documentation mentions the requirement already: with this
patch, it's going to be enforced by runtime checks as well,
by forbidding a non-compliant guest from being defined as well
as edited and started.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1316774
Similarly to one of the previous commits, we need to deal
properly with symlinks in hotplug case too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Imagine you have a disk with the following source set up:
/dev/disk/by-uuid/$uuid (symlink to) -> /dev/sda
After cbc45525cb the transitive end of the symlink chain is
created (/dev/sda), but we need to create any item in chain too.
Others might rely on that.
In this case, /dev/disk/by-uuid/$uuid comes from domain XML thus
it is this path that secdriver tries to relabel. Not the resolved
one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After previous commit this has become redundant step.
Also setting up devices in namespace and setting their label
later on are two different steps and should be not done at once.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Not only we should set the MTU on the host end of the device but
also let qemu know what MTU did we set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far we allow to set MTU for libvirt networks. However, not all
domain interfaces have to be plugged into a libvirt network and
even if they are, they might want to have a different MTU (e.g.
for testing purposes).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We lacked of timestamp in tainting of guests log,
which bring troubles for finding guest issues:
such as whether a guest powerdown caused by qemu-monitor-command
or others issues inside guests.
If we had timestamp in tainting of guests log,
it would be helpful when checking guest's /var/log/messages.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Based on work of Mehdi Abaakouk <sileht@sileht.net>.
When parsing vhost-user interface XML and no ifname is found we
can try to fill it in in post parse callback. The way this works
is we try to make up interface name from given socket path and
then ask openvswitch whether it knows the interface.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1413922
While all the code that deals with qemu namespaces correctly
detects whether we are running as root (and turn into NO-OP for
qemu:///session) the actual unshare() call is not guarded with
such check. Therefore any attempt to start a domain under
qemu:///session shall fail as unshare() is reserved for root.
The fix consists of moving unshare() call (for which we have a
wrapper called virProcessSetupPrivateMountNS) into
qemuDomainBuildNamespace() where the proper check is performed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
When creating new /dev/* for qemu, we do chown() and copy ACLs to
create the exact copy from the original /dev. I though that
copying SELinux labels is not necessary as SELinux will chose the
sane defaults. Surprisingly, it does not leaving namespace with
the following labels:
crw-rw-rw-. root root system_u:object_r:tmpfs_t:s0 random
crw-------. root root system_u:object_r:tmpfs_t:s0 rtc0
drwxrwxrwt. root root system_u:object_r:tmpfs_t:s0 shm
crw-rw-rw-. root root system_u:object_r:tmpfs_t:s0 urandom
As a result, domain is unable to start:
error: internal error: process exited while connecting to monitor: Error in GnuTLS initialization: Failed to acquire random data.
qemu-kvm: cannot initialize crypto: Unable to initialize GNUTLS library: Failed to acquire random data.
The solution is to copy the SELinux labels as well.
Reported-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far the decision whether /dev/* entry is created in the qemu
namespace is really simple: does the path starts with "/dev/"?
This can be easily fooled by providing path like the following
(for any considered device like disk, rng, chardev, ..):
/dev/../var/lib/libvirt/images/disk.qcow2
Therefore, before making the decision the path should be
canonicalized.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far the namespaces were turned on by default unconditionally.
For all non-Linux platforms we provided stub functions that just
ignored whatever namespaces setting there was in qemu.conf and
returned 0 to indicate success. Moreover, we didn't really check
if namespaces are available on the host kernel.
This is suboptimal as we might have ignored user setting.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a simple wrapper over mount(). However, not every system
out there is capable of moving a mount point. Therefore, instead
of having to deal with this fact in all the places of our code we
can have a simple wrapper and deal with this fact at just one
place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Due to a copy-paste error, the debug message reads:
Setting up disks
It should have been:
Setting up inputs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function is used only from code compiled on Linux. Therefore
on non-Linux platforms it triggers compilation error:
../../src/qemu/qemu_domain.c:209:1: error: unused function 'qemuDomainGetPreservedMounts' [-Werror,-Wunused-function]
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Again, there is no need to create /var/lib/libvirt/$domain.*
directories in CreateNamespace(). It is sufficient to create them
as soon as we need them which is in BuildNamespace. This way we
don't leave them around for the whole lifetime of domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The c1140eb9e got me thinking. We don't want to special case /dev
in qemuDomainGetPreservedMounts(), but in all other places in the
code we special case it anyway. I mean,
/var/run/libvirt/$domain.dev path is constructed separately just
so that it is not constructed here. It makes only a little sense
(if any at all).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If something goes wrong in this function we try a rollback. That
is unlink all the directories we created earlier. For some weird
reason unlink() was called instead of rmdir().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Just so it doesn't bite us in the future, even though it's unlikely.
And fix the comment above it as well. Commit e08ee7cd34 took the
info from the function it's calling, but that was lie itself in the
first place.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
With my namespace patches, we are spawning qemu in its own
namespace so that we can manage /dev entries ourselves. However,
some filesystems mounted under /dev needs to be preserved in
order to be shared with the parent namespace (e.g. /dev/pts).
Currently, the list of mount points to preserve is hardcoded
which ain't right - on some systems there might be less or more
items under real /dev that on our list. The solution is to parse
/proc/mounts and fetch the list from there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Again, not something that I'd hit, but there is a chance in
theory that this might bite us. Currently the way we decide
whether or not to create /dev entry for a device is by marching
first four characters of path with "/dev". This might be not
enough. Just imagine somebody has a disk image stored under
"/devil/path/to/disk". We ought to be matching against "/dev/".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Not that I'd encounter any bug here, but the code doesn't look
100% correct. Imagine, somebody is trying to attach a device to a
domain, and the device's /dev entry already exists in the qemu
namespace. This is handled gracefully and the control continues
with setting up ACLs and calling security manager to set up
labels. Now, if any of these steps fail, control jump on the
'cleanup' label and unlink() the file straight away. Even when it
was not us who created the file in the first place. This can be
possibly dangerous.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1406837
Imagine you have a domain configured in such way that you are
assigning two PCI devices that fall into the same IOMMU group.
With mount namespace enabled what happens is that for the first
PCI device corresponding /dev/vfio/X entry is created and when
the code tries to do the same for the second mknod() fails as
/dev/vfio/X already exists:
2016-12-21 14:40:45.648+0000: 24681: error :
qemuProcessReportLogError:1792 : internal error: Process exited
prior to exec: libvirt: QEMU Driver error : Failed to make device
/var/run/libvirt/qemu/windoze.dev//vfio/22: File exists
Worse, by default there are some devices that are created in the
namespace regardless of domain configuration (e.g. /dev/null,
/dev/urandom, etc.). If one of them is set as backend for some
guest device (e.g. rng, chardev, etc.) it's the same story as
described above.
Weirdly, in attach code this is already handled.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1405269
If a secret was not provided for what was determined to be a LUKS
encrypted disk (during virStorageFileGetMetadata processing when
called from qemuDomainDetermineDiskChain as a result of hotplug
attach qemuDomainAttachDeviceDiskLive), then do not attempt to
look it up (avoiding a libvirtd crash) and do not alter the format
to "luks" when adding the disk; otherwise, the device_add would
fail with a message such as:
"unable to execute QEMU command 'device_add': Property 'scsi-hd.drive'
can't find value 'drive-scsi0-0-0-0'"
because of assumptions that when the format=luks that libvirt would have
provided the secret to decrypt the volume.
Access to unlock the volume will thus be left to the application.
Disk->info is not live updatable so add a check for this. Otherwise
libvirt reports success even though no data was updated.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Given how intrusive previous patches are, it might happen that
there's a bug or imperfection. Lets give users a way out: if they
set 'namespaces' to an empty array in qemu.conf the feature is
suppressed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When attaching a device to a domain that's using separate mount
namespace we must maintain /dev entries in order for qemu process
to see them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When attaching a device to a domain that's using separate mount
namespace we must maintain /dev entries in order for qemu process
to see them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When attaching a device to a domain that's using separate mount
namespace we must maintain /dev entries in order for qemu process
to see them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When attaching a device to a domain that's using separate mount
namespace we must maintain /dev entries in order for qemu process
to see them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When starting a domain and separate mount namespace is used, we
have to create all the /dev entries that are configured for the
domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When starting a domain and separate mount namespace is used, we
have to create all the /dev entries that are configured for the
domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When starting a domain and separate mount namespace is used, we
have to create all the /dev entries that are configured for the
domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When starting a domain and separate mount namespace is used, we
have to create all the /dev entries that are configured for the
domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When starting a domain and separate mount namespace is used, we
have to create all the /dev entries that are configured for the
domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When starting a domain and separate mount namespace is used, we
have to create all the /dev entries that are configured for the
domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Prime time. When it comes to spawning qemu process and
relabelling all the devices it's going to touch, there's inherent
race with other applications in the system (e.g. udev). Instead
of trying convincing udev to not touch libvirt managed devices,
we can create a separate mount namespace for the qemu, and mount
our own /dev there. Of course this puts more work onto us as we
have to maintain /dev files on each domain start and device
hot(un-)plug. On the other hand, this enhances security also.
From technical POV, on domain startup process the parent
(libvirtd) creates:
/var/lib/libvirt/qemu/$domain.dev
/var/lib/libvirt/qemu/$domain.devpts
The child (which is going to be qemu eventually) calls unshare()
to create new mount namespace. From now on anything that child
does is invisible to the parent. Child then mounts tmpfs on
$domain.dev (so that it still sees original /dev from the host)
and creates some devices (as explained in one of the previous
patches). The devices have to be created exactly as they are in
the host (including perms, seclabels, ACLs, ...). After that it
moves $domain.dev mount to /dev.
What's the $domain.devpts mount there for then you ask? QEMU can
create PTYs for some chardevs. And historically we exposed the
host ends in our domain XML allowing users to connect to them.
Therefore we must preserve devpts mount to be shared with the
host's one.
To make this patch as small as possible, creating of devices
configured for domain in question is implemented in next patches.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far this function takes virDomainObjPtr which:
1) is an overkill,
2) might be not available in all the places we will use it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If libvirtd is running unprivileged, it can open a device's PCI config
data in sysfs, but can only read the first 64 bytes. But as part of
determining whether a device is Express or legacy PCI,
qemuDomainDeviceCalculatePCIConnectFlags() will be updated in a future
patch to call virPCIDeviceIsPCIExpress(), which tries to read beyond
the first 64 bytes of the PCI config data and fails with an error log
if the read is unsuccessful.
In order to avoid creating a parallel "quiet" version of
virPCIDeviceIsPCIExpress(), this patch passes a virQEMUDriverPtr down
through all the call chains that initialize the
qemuDomainFillDevicePCIConnectFlagsIterData, and saves the driver
pointer with the rest of the iterdata so that it can be used by
qemuDomainDeviceCalculatePCIConnectFlags(). This pointer isn't used
yet, but will be used in an upcoming patch (that detects Express vs
legacy PCI for VFIO assigned devices) to examine driver->privileged.
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemuDomainObjExitAgent is unsafe.
First it accesses domain object without domain lock.
Second it uses outdated logic that goes back to commit 79533da1 of
year 2009 when code was quite different. (unref function
instead of unreferencing only unlocked and disposed object
in case of last reference and leaved unlocking to the caller otherwise).
Nowadays this logic may lead to disposing locked object
i guess.
Another problem is that the callers of qemuDomainObjEnterAgent
use domain object again (namely priv->agent) without domain lock.
This patch address these two problems.
qemuDomainGetAgent is dropped as unused.
Use the util function virHostdevIsSCSIDevice() to simplify if
statements.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Add missing checks if a hostdev is a subsystem/SCSI device before access
the union member 'subsys'/'scsi'. Also fix indentation and simplify
qemuDomainObjCheckHostdevTaint().
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Don't use qemuMonitorGetCPUInfo which does a lot of matching to get the
full picture which is not necessary and would be mostly discarded.
Refresh only the vcpu halted state using data from query-cpus.
Previously we added a set of EHCI+UHCI controllers to Q35 machines to
mimic real hardware as closely as possible, but recent discussions
have pointed out that the nec-usb-xhci (USB3) controller is much more
virtualization-friendly (uses less CPU), so this patch switches the
default for Q35 machinetypes to add an XHCI instead (if it's
supported, which it of course *will* be).
Since none of the existing test cases left out USB controllers in the
input XML, a new Q35 test case was added which has *no* devices, so
ends up with only the defaults always put in by qemu, plus those added
by libvirt.
Now the a dmi-to-pci-bridge is automatically added just as it's needed
(when a pci-bridge is being added), we no longer have any need to
force-add one to every single Q35 domain.
We're keeping some things at default and that's not something we want to
do intentionally. Let's save some sensible defaults upfront in order to
avoid having problems later. The details for the defaults (of the newer
implementation) can be found in qemu's commit 5400c02b90bb:
http://git.qemu.org/?p=qemu.git;a=commit;h=5400c02b90bb
Since we are merely saving the defaults it will not change the guest ABI
and thanks to the fact that we're doing it in the PostParse callback it
will not break the ABI stability checks.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add the secret object so the 'passwordid=' can be added if the command line
if there's a secret defined in/on the host for TCP chardev TLS objects.
Preparation for the secret involves adding the secinfo to the char source
device prior to command line processing. There are multiple possibilities
for TCP chardev source backend usage.
Add test for at least a serial chardev as an example.
Adding a field to the domain's private vcpu object to hold the halted
state information.
Adding two functions in support of the halted state:
- qemuDomainGetVcpuHalted: retrieve the halted state from a
private vcpu object
- qemuDomainRefreshVcpuHalted: obtain the per-vcpu halted states
via qemu monitor and store the results in the private vcpu objects
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Hao QingFeng <haoqf@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Since TLS was introduced hostwide for libvirt 2.3.0 and a domain
configurable haveTLS was implemented for libvirt 2.4.0, we have to
modify the migratable XML for specific case where the 'tls' attribute
is based on setting from qemu.conf.
The "tlsFromConfig" is libvirt internal attribute and is stored only in
status XML to ensure that when libvirtd is restarted this internal flag
is not lost by the restart.
That flag is used to decide whether we should put *tls* attribute to
migratable XML or not.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add an optional "tls='yes|no'" attribute for a TCP chardev.
For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit id '5f2a132786' should have placed the data in the host source
def structure since that's also used by smartcard, redirdev, and rng in
order to provide a backend tcp channel. The data in the private structure
will be necessary in order to provide the secret properly.
This also renames the previous names from "Chardev" to "ChrSource" for
the private data structures and API's
Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.
This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Modeled after the qemuDomainHostdevPrivatePtr (commit id '27726d8c'),
create a privateData pointer in the _virDomainChardevDef to allow storage
of private data for a hypervisor in order to at least temporarily store
secret data for usage during qemuBuildCommandLine.
NB: Since the qemu_parse_command (qemuParseCommandLine) code is not
expecting to restore the secret data, there's no need to add code
code to handle this new structure there.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This improves commit 706b5b6277 in a way that we check qemu capabilities
instead of what architecture we are running on to detect whether we can
use *virtio-vga* model or not. This is not a case only for arm/aarch64.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
All definition validation that doesn't depend on qemu capabilities
and was allowed previously as valid definition should be placed into
qemuDomainDefValidate.
The check whether video type is supported or not was based on an enum
that translates type into model. Use switch to ensure that if new
video type is added, it will be properly handled.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This breaks vCPU hotplug, because when starting a domain, we
create a copy of domain definition (which becomes live XML) and
during the post parse callbacks we might adjust some tunings so
that vCPU hotplug is possible.
This reverts commit 581b7756af.
When creating a copy of virDomainDef we save ourselves the
trouble of writing deep-copy functions and just format and parse
back domain/device XML. However, the XML we are parsing was
already fully formatted - there is no reason to run post parse
callbacks (which fill in blanks - there are none!).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Just like we did two commits ago, don't try to fetch capabilities
for non-existing binary. Re-use the ones we have for running
domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Just like we did two commits ago, don't try to fetch capabilities
for non-existing binary. Re-use the ones we have for running
domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We can't rely on def->emulator path. It may be provided by user
as we give them opportunity to provide their own XML for
migration. Therefore the path may point to just whatever binary
(or even to a non-existent file). Moreover, this path is meant
for destination, but the capabilities lookup is done on source.
What we can do is to assume same capabilities for post parse
callbacks as the running domain has. They will be used just to
add some default models/controllers/devices/... anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Just like virDomainDefPostParseCallback has gained new
parseOpaque argument, we need to follow the logic with
virDomainDeviceDefPostParse.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some callers might want to pass yet another pointer to opaque
data to post parse callbacks. The driver generic one is not
enough because two threads executing post parse callback might
want to see different data (e.g. domain object pointer that
domain def belongs to).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The reworked API is now called virCPUUpdate and it should change the
provided CPU definition into a one which can be consumed by the QEMU
command line builder:
- host-passthrough remains unchanged
- host-model is turned into custom CPU with a model and features
copied from host
- custom CPU with minimum match is converted similarly to host-model
- optional features are updated according to host's CPU
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Put it into qemuDomainPrepareShmemChardev() so it can be used later.
Also don't fill in the path unless the server option is enabled.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Use the state information (online, hotpluggable) provided by the monitor
code rather than trying to infer it. This fixes an issue where on
architectures that require hotplug of multiple threads at once the
sub-cores would get updated as offline on daemon restart thus creating
an invalid configuration.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1375783
When migration fails, we need to poke QEMU monitor to check for a reason
of the failure. We did this using query-migrate QMP command, which is
not supposed to return any meaningful result on the destination side.
Thus if the monitor was still functional when we detected the migration
failure, parsing the answer from query-migrate always failed with the
following error message:
"info migration reply was missing return status"
This irrelevant message was then used as the reason for the migration
failure replacing any message we might have had.
Let's use harmless query-status for poking the monitor to make sure we
only get an error if the monitor connection is broken.
https://bugzilla.redhat.com/show_bug.cgi?id=1374613
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When a source image is dropped when missing due to startup policy the
policy needs to be cleared since it was relevant only for the given
storage source. New sources need to update it if needed.
Since the domain lock is not held during preparation of an external XML
config, it is possible that the value can change resulting in unexpected
failures during ABI consistency checking for some save and migrate
operations.
This patch adds a new flag to skip the checking of the cur_balloon value
and then sets the destination value to the source value to ensure
subsequent checks without the skip flag will succeed.
This way it is protected from forges and is keeped up to date too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Add support for using the new approach to hotplug vcpus using device_add
during startup of qemu to allow sparse vcpu topologies.
There are a few limitations imposed by qemu on the supported
configuration:
- vcpu0 needs to be always present and not hotpluggable
- non-hotpluggable cpus need to be ordered at the beginning
- order of the vcpus needs to be unique for every single hotpluggable
entity
Qemu also doesn't really allow to query the information necessary to
start a VM with the vcpus directly on the commandline. Fortunately they
can be hotplugged during startup.
The new hotplug code uses the following approach:
- non-hotpluggable vcpus are counted and put to the -smp option
- qemu is started
- qemu is queried for the necessary information
- the configuration is checked
- the hotpluggable vcpus are hotplugged
- vcpus are started
This patch adds a lot of checking code and enables the support to
specify the individual vcpu element with qemu.
The vcpu order information is extracted only for hotpluggable entities,
while vcpu definitions belonging to the same hotpluggable entity need
to all share the order information.
We also can't overwrite it right away in the vcpu info detection code as
the order is necessary to add the hotpluggable vcpus enabled on boot in
the correct order.
The helper will store the order information in places where we are
certain that it's necessary.
Introduce a new migration cookie flag that will be used for any
configurations that are not compatible with libvirt that would not
support the specific vcpu hotplug approach. This will make sure that old
libvirt does not fail to reproduce the configuration correctly.
Individual vCPU hotplug requires us to track the state of any vCPU. To
allow this add the following XML:
<domain>
...
<vcpu current='2'>3</vcpu>
<vcpus>
<vcpu id='0' enabled='yes' hotpluggable='no' order='1'/>
<vcpu id='1' enabled='yes' hotpluggable='yes' order='2'/>
<vcpu id='1' enabled='no' hotpluggable='yes'/>
</vcpus>
...
The 'enabled' attribute allows to control the state of the vcpu.
'hotpluggable' controls whether given vcpu can be hotplugged and 'order'
allows to specify the order to add the vcpus.
Similarly to devices the guest may allow unplug of the VCPU if libvirt
is down. To avoid problems, refresh the vcpu state on reconnect. Don't
mess with the vcpu state otherwise.
Now that the monitor code gathers all the data we can extract it to
relevant places either in the definition or the private data of a vcpu.
As only thread id is broken for TCG guests we may extract the rest of
the data and just skip assigning of the thread id. In case where qemu
would allow cpu hotplug in TCG mode this will make it work eventually.
For hotplug purposes it's necessary to retrieve data using
query-hotpluggable-cpus while the old query-cpus API report thread IDs
and order of hotplug.
This patch adds code that merges the data using a rather non-trivial
algorithm and fills the data to the qemuMonitorCPUInfo structure for
adding to appropriate place in the domain definition.
As of qemu commit:
commit a32ef3bfc12c8d0588f43f74dcc5280885bbdb30
Author: Thomas Huth <thuth@redhat.com>
Date: Wed Jul 22 15:59:50 2015 +0200
vl: Add another sanity check to smp_parse() function
v2.4.0-952-ga32ef3b
configuration where the maximum CPU count doesn't match the topology is
rejected. Prior to that only configurations where the topology would
contain more cpus than the maximum count would be rejected.
Use QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS as a relevant recent enough
witness to avoid breaking old configs.
Now that the default USB controller model is explicit rather
than implicit for i440fx machines, we have to tweak the
conditions for dropping it in order to keep migration towards
libvirt <= 0.9.4 working.
When the user doesn't specify any model for a USB controller,
we use an architecture-dependent default, but we don't reflect
it in the guest XML.
Pick the default USB controller model when parsing the guest
XML instead of when creating the QEMU command line, so that
our choice is saved back to disk.
In qemu, enabling this feature boils down to adding the following
onto the command line:
-global driver=cfi.pflash01,property=secure,value=on
However, there are some constraints resulting from the
implementation. For instance, System Management Mode (SMM) is
required to be enabled, the machine type must be q35-2.4 or
later, and the guest should be x86_64. While technically it is
possible to have 32 bit guests with secure boot, some non-trivial
CPU flags tuning is required (for instance lm and nx flags must
be prohibited). Given complexity of our CPU driver, this is not
trivial. Therefore I've chosen to forbid 32 bit guests for now.
If there's ever need, we can refine the check later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Call the vcpu thread info validation separately to decrease complexity
of returned values by qemuDomainRefreshVcpuInfo.
This function now returns 0 on success and -1 on error. Certain
failures of qemu to report data are still considered as success. Any
error reported now is fatal.
Validate the presence of the thread id according to state of the vCPU
rather than just checking the vCPU count. Additionally put the new
validation code into a separate function so that the information
retrieval can be split from the validation.
Move QEMU_DRIVE_HOST_PREFIX into the qemu_alias.c to dissuade future
callers from using it. Create qemuAliasDiskDriveSkipPrefix in order
to handle the current consumers that desire to check if an alias has
the drive- prefix and "get beyond it" in order to get the disk alias.
To sync with virDomainControllerModelUSB, we add two models
in qemuControllerModelUSB 'qusb1' and 'qusb2', but those
models are not supported in qemu driver. So add check in
device post parse to report errors if 'qusb1' and 'qusb2'
are specified.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Until now we simply errored out when the translation from pool+volume
failed. However, we should instead check whether that disk is needed or
not since there is an option for that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1168453
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There is an error reset following the function and check for
startupPolicy before that. Let's reflect those things inside that
function so that future code doesn't have to be that complex.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The panic devices with models s390 and pseries are autogenerated.
For backwards compatibility reasons the devices are to be removed
when migrating.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Consider the following XML snippet:
<memory model=''>
<target>
<size unit='KiB'>523264</size>
<node>0</node>
</target>
</memory>
Whats wrong you ask? The @model attribute. This should result in
an error thrown into users faces during virDomainDefine phase.
Except it doesn't. The XML validation catches this error, but if
users chose to ignore that, they will end up with invalid XML.
Well, they won't be able to start the machine - that's when error
is produced currently. But it would be nice if we could catch the
error like this earlier.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The current LUKS support has a "luks" volume type which has
a "luks" encryption format.
This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)
IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.
IOW, when creating a storage volume we should use this XML
<volume>
<name>demo.raw</name>
<capacity>5368709120</capacity>
<target>
<format type='raw'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</target>
</volume>
and when configuring a guest disk we should use
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/home/berrange/VirtualMachines/demo.raw'/>
<target dev='sda' bus='scsi'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</disk>
This commit thus removes the "luks" storage volume type added
in
commit 318ebb36f1
Author: John Ferlan <jferlan@redhat.com>
Date: Tue Jun 21 12:59:54 2016 -0400
util: Add 'luks' to the FileTypeInfo
The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.
The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.
The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format. I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Dropping the caching of ccw address set.
The cached set is not required anymore, because the set is now being
recalculated from the domain definition on demand, so the cache
can be deleted.
Dropping the caching of virtio serial address set.
The cached set is not required anymore, because the set is now being
recalculated from the domain definition on demand, so the cache
can be deleted.
Credit goes to Cole Robinson.
Resolves a CI test integration failure with a RHEL6/Centos6 environment.
In order to use a LUKS encrypted device, the design decision was to
generate an encrypted secret based on the master key. However, commit
id 'da86c6c' missed checking for that specifically.
When qemuDomainSecretSetup was implemented, a design decision was made
to "fall back" to a plain text secret setup if the specific cipher was
not available (e.g. virCryptoHaveCipher(VIR_CRYPTO_CIPHER_AES256CBC))
as well as the QEMU_CAPS_OBJECT_SECRET. For the luks encryption setup
there is no fall back to the plaintext secret, thus if that gets set
up by qemuDomainSecretSetup, then we need to fail.
Also, while the qemuxml2argvtest has set the QEMU_CAPS_OBJECT_SECRET
bit, it didn't take into account the second requirement that the
ability to generate the encrypted secret is possible. So modify the
test to not attempt to run the luks-disk if we know we don't have
the encryption algorithm.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1301021
Generate the luks command line using the AES secret key to encrypt the
luks secret. A luks secret object will be in addition to a an AES secret.
For hotplug, check if the encinfo exists and if so, add the AES secret
for the passphrase for the secret object used to decrypt the device.
Modify/augment the fakeSecret* in qemuxml2argvtest in order to handle
find a uuid or a volume usage with a specific path prefix in the XML
(corresponds to the already generated XML tests). Add error message
when the 'usageID' is not 'mycluster_myname'. Commit id '1d632c39'
altered the error message generation to rely on the errors from the
secret_driver (or it's faked replacement).
Add the .args output for adding the LUKS disk to the domain
Signed-off-by: John Ferlan <jferlan@redhat.com>
Soon we will be adding luks encryption support. Since a volume could require
both a luks secret and a secret to give to the server to use of the device,
alter the alias generation to create a slightly different alias so that
we don't have two objects with the same alias.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Migration to an older libvirt (pre v1.3.0-175-g7140807) is broken
because older versions of libvirt generated different channel paths and
they didn't drop the default paths when parsing domain XMLs. We'd get
such a nice error message:
internal error: process exited while connecting to monitor:
2016-07-08T15:28:02.665706Z qemu-kvm: -chardev socket,
id=charchannel0,path=/var/lib/libvirt/qemu/channel/target/
domain-3-nest/org.qemu.guest_agent.0,server,nowait: Failed to bind
socket to /var/lib/libvirt/qemu/channel/target/domain-3-nest/
org.qemu.guest_agent.0: No such file or directory
That said, we should not even format the default paths when generating a
migratable XML.
https://bugzilla.redhat.com/show_bug.cgi?id=1320470
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Playing directly with our live definition, updating it, and reverting it
back once we are done is very nice and it's quite dangerous too. Let's
just make a copy of the domain definition if needed and do all tricks on
the copy.
https://bugzilla.redhat.com/show_bug.cgi?id=1320470
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
