One can not issue monitor commands manually during async calls thru
designated API while this could be useful for testing/debugging purposes.
qemuDomainQemuMonitorCommand uses job of type QEMU_JOB_MODIFY and any async
call disable parallel execution of this type of job. The only state that is
changed is taint variable. AFAIU the only place we can mess is resetting
taint flag in qemuProcessStop routine under some async job. But this can not
happen thanx to both virDomainObjIsActive check in qemuDomainQemuMonitorCommand
and resetting active status in qemuProcessStop before taint flag.
Change job type to QEMU_JOB_QUERY and thus make the API call available for
most of async jobs.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Allow gathering available vcpu ids, their state and offlinability via
the qemu guest agent. The maximum id was chosen arbitrarily and ought
to be enough for everybody.
Documentation for the "guest-set-vcpus" command describes a proper
algorithm how to set vcpus. This patch makes the following changes:
- state of cpus that has not changed is not updated
- if the command was partially successful the command is re-tried with
the rest of the arguments to get a proper error message
- code is more robust against malicious guest agent
- fix testsuite to the new semantics
Similarly to commit d294f6b0dff7, if the name is long enough, the
filename can be longer than filesystem's limit.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1334237
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If the domain is not running, but for example the CPUs are stopped, the
ACPI event gets queued and resume of the domain will just shut it off.
https://bugzilla.redhat.com/show_bug.cgi?id=1216281
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since obtaining a job can wait for another job to finish, the state
might change in the meantime. And checking it more than once is
pointless.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The virQEMUDriverConfig object contains lists of
loader:nvram pairs to advertise firmwares supported by
by the driver, and qemu_conf.c contains code to populate
the lists, all of which is useful for other drivers too.
To avoid code duplication, introduce a virFirmware object
to encapsulate firmware details and switch the qemu driver
to use it.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move all APIs with a virHostMEM name prefix out into new
util/virhostmem.h & util/virhostmem.c files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move all APIs with a virHostCPU name prefix out into new
util/virhostcpu.h & util/virhostcpu.c files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In preparation for moving all the CPU related APIs out of
the nodeinfo file, give them a virHostCPU name prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In preparation for moving all the memory related APIs out of
the nodeinfo file, give them a virHostMem name prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Nearly all the methods in the nodeinfo file are given a
'const char *sysfs_prefix' parameter to override the
default sysfs path (/sys/devices/system). Every single
caller passes in NULL for this, except one use in the
unit tests. Furthermore this parameter is totally
Linux-specific, when the APIs are intended to be cross
platform portable.
This removes the sysfs_prefix parameter and instead gives
a new method linuxNodeInfoSetSysFSSystemPath for use by
the test suite.
For two of the methods this hardcodes use of the constant
SYSFS_SYSTEM_PATH, since the test suite does not need to
override the path for thos methods.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If you want to set block device I/O tuning values that end with '_max'
and there is nothing else set, libvirt emits an error. In particular:
error: internal error: Unexpected error
That's an unknown error. That is because *_max values depend on their
respective non-_max values. QEMU even says that in the error message
sent as a response to the monitor command:
"error": {"class": "GenericError", "desc": "bps_max/iops_max require
corresponding bps/iops values"}
the problem was that we didn't know that and there was no check for it.
Adding such check makes sure that there will be less confused users.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The virConnectOpenInternal method opens the libvirt client
config file and uses it to resolve things like URI aliases.
There may be driver specific things that are useful to
store in the config file too, so rather than have them
re-parse the same file, pass the virConfPtr down to the
drivers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
qemuProcessStart does not unset the infrastructure that retrieves errors
from the qemu log file in case of migration. As this wasn't handled
properly in qemuDomainSaveImageStartVM we kept the logging context/fd
open for the lifetime of the VM rather than closing it after it's not
needed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1325080
Similarly to the domain definition validator add a device validator. The
change to the prototype of the domain validator is necessary as
virDomainDeviceInfoIterateInternal requires a non-const pointer.
Until now we weren't able to add checks that would reject configuration
once accepted by the parser. This patch adds a new callback and
infrastructure to add such checks. In this patch all the places where
rejecting a now-invalid configuration wouldn't be a good idea are marked
with a new parser flag.
Hand-entering indexes for 20 PCI controllers is not as tedious as
manually determining and entering their PCI addresses, but it's still
annoying, and the algorithm for determining the proper index is
incredibly simple (in all cases except one) - just pick the lowest
unused index.
The one exception is USB2 controllers because multiple controllers in
the same group have the same index. For these we look to see if 1) the
most recently added USB controller is also a USB2 controller, and 2)
the group *that* controller belongs to doesn't yet have a controller
of the exact model we're just now adding - if both are true, the new
controller gets the same index, but in all other cases we just assign
the lowest unused index.
With this patch in place and combined with the automatic PCI address
assignment, we can define a PCIe switch with several ports like this:
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-switch-upstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
...
These will each get a unique index, and PCI addresses that connect
them together appropriately with no pesky numbers required.
The libvirt internal bits can be changed for disks that don't otherwise
support changing media. Remove the switch statement and allow changes of
non-source data for all disks.
qemuDomainChangeDiskLive rolled back few changes to the disk definition
if changing of the media failed. This can be avoided by moving some code
around.
If the stats for a block device can't be acquired from qemu we've
fallen back to loading them from the file on the disk in libvirt.
If qemu is not cooperating due to being stuck on an inaccessible NFS
share we would then attempt to read the files and get stuck too with
the VM object locked. All other APIs would eventually get stuck waiting
on the VM lock.
Avoid this problem by skipping the block stats if the VM is online but
the monitor did not provide any stats.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1337073
