Ensuring that we don't call the virDrvConnectOpen method with a NULL URI
means that the drivers can drop various checks for NULL URIs. These were
not needed anymore since the probe functionality was split
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Declare what URI schemes a driver supports in its virConnectDriver
struct. This allows us to skip trying to open the driver entirely
if the URI scheme doesn't match.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add a localOnly flag to the virConnectDriver struct which allows a
driver to indicate whether it is local-only, or permits remote
connections. Stateful drivers running inside libvirtd are generally
local only. This allows us to remote the check for uri->server != NULL
from most drivers.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the virDrvConnectOpen method is supposed to handle both
opening an explicit URI and auto-probing a driver if no URI is
given. Introduce a dedicated virDrvConnectURIProbe method to enable the
probing functionality to be split from the driver opening functionality.
It is still possible for NULL to be passed to the virDrvConnectOpen
method after this change, because the remote driver needs special
handling to enable probing of the URI against a remote libvirtd daemon.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Historically we have used a bare xen:/// URI for connecting to the
legacy Xen driver. The new libxl Xen driver follows the new practice
of allowing '/system' as a path, as well as bare '/' for compat with
the old Xen driver.
This documents xen:///system as the preferred format for Xen, leaving
xen:/// as an undocumented feature just for back-compat.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Policy-Kit has been replaced by polkit (referred to, respectively,
as POLKIT0 and POLKIT1 in our Makefiles).
The last build fix with old Policy-Kit was in May 2013:
commit <442eb2ba> and build with -Wunused-label was broken
since April 2016: commit <8437130>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Seeing a log message saying 'flags=93' is ambiguous & confusing unless
you happen to know that libvirt always prints flags as hex. Change our
debug messages so that they always add a '0x' prefix when printing flags,
and '0' prefix when printing mode. A few other misc places gain a '0x'
prefix in error messages too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since commit c4bdff19, the path to the configuration file has been constructed
in the following manner:
- if no config filename was passed to virConfLoadConfigPath, libvirt.conf was
used as default
- otherwise the filename was concatenated with
"<config_dir>/libvirt/libvirt%s%s.conf" which in admin case resulted in
"libvirt-libvirt-admin.conf.conf". Obviously, this non-existent config led to
ignoring all user settings in libvirt-admin.conf. This patch requires the
config filename to be always provided as an argument with the concatenation
being simplified.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1357364
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The virConnectOpenInternal method opens the libvirt client
config file and uses it to resolve things like URI aliases.
There may be driver specific things that are useful to
store in the config file too, so rather than have them
re-parse the same file, pass the virConfPtr down to the
drivers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch aims to fix observed crash on daemon shutdown. Main thread is in
the process of state drivers cleanup, network driver is cleaned up and
qemu driver is not yet. Meanwhile eof event from qemu process triggers
qemuProcessStop -> networkReleaseActualDevice and crash happens as
network driver is already cleaned up.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
My commit 0d1579572 crashes on a URI without a scheme, like via
'virsh --connect frob'
Add a check on uri->server too while we are at it, and centralize
them all
Make it possible to build vz driver as a module and don't link it with
libvirt.so statically.
Remove registering it on client's side as far as we start relying on daemon
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
As we need to provide support for URI aliases in libvirt-admin as well, URI
alias matching needs to be internally visible. Since
virConnectOpenResolveURIAlias does have a compatible signature, it could be
easily reused by libvirt-admin. This patch moves URI alias matching to util,
renaming it accordingly.
virConnectGetConfig and virConnectGetConfigPath were static libvirt
methods, merely because there hasn't been any need for having them
internally exported yet. Since libvirt-admin also needs to reference
its config file, 'xGetConfig' should be exported.
Besides moving, this patch also renames the methods accordingly,
as they are libvirt config specific.
VIR_DEBUG and VIR_WARN will automatically add a new line to the message,
having "\n" at the end or at the beginning of the message results in
empty lines.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch moves all src/parallels/parallels* files to vz/vz*
and fixes build accordingly.
No functional changes.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
This patch changes all parallels/vz driver structure and
function prefixes from parallels to vz.
No functional changes.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A bunch of code is wrapped in #if WITH_LIBVIRTD in order to
enable the virStateDriver to be disabled when libvirtd is not
built. Disabling this code doesn't have any real functional
benefit beyond removing 1 pointer from the virConnectPtr struct,
while having a cost of many more conditionals.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since our big split of libvirt.c there are only a few functions
living there. The majority was moved to corresponding subfile,
e.g. domain functions were moved to libvirt-domain.c. However,
the patches for virDomainGetFSInfo() and virDomainFSInfoFree()
introduction were posted prior the big split and merged after.
This resulted in two domain functions landing in wrong file.
Move them to the correct one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virDomainGetFSInfo returns a list of filesystems information mounted in the
guest, which contains mountpoints, device names, filesystem types, and
device aliases named by libvirt. This will be useful, for example, to
specify mountpoints to fsfreeze when taking snapshot of a part of disks.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
The virTypedParameterValidateSet method will need to be used
from several libvirt-*.c files so must be non-static
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()
Management software wants to be able to allocate disk space on demand.
To support this they need keep track of the space occupation of the
block device. This information is reported by qemu as part of block
stats.
This patch extend the block information in the bulk stats with the
allocation information.
To keep the same behaviour a helper is extracted from
qemuMonitorJSONGetBlockExtent in order to get per-device allocation
information.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Due to a missing check the API can be successfully called even if
the connection is ReadOnly. Fortunately, the API hasn't been
released yet, so there's no need for a CVE.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
A long time ago in a galaxy far, far away it has been decided
that libvirt will manage not only domains but host as well. And
with my latest work on qemu driver supporting huge pages, we miss
the cherry on top: an API to allocate huge pages on the run.
Currently users are forced to log into the host and adjust the
huge pages pool themselves. However, with this API the problem
is gone - they can both size up and size down the pool.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Clean up all _virDomainBlockStats.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainInterfaceStats.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
