Rather than expecting callers to pass a virConnectPtr into the
virDomainDiskTranslateSourcePool() method, just acquire a connection
to the storage driver when needed.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 038eb472a0.
On reflection adding defaults for arbitrary guest XML device config
settings to the qemu.conf is not a sustainable path. Removing the
support for rx/tx queue size so that it doesn't set a bad precedent.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 'f0f2a5ec2' neglected to adjust the if condition to split
out the possibility that the @watchdog is NULL when altering the
message to add detail about the model.
Just split out the condition and use previous/original message, but
with the new message code.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
The virStorageTranslateDiskSourcePool method modifies a virDomainDiskDef
to resolve any storage pool reference. For some reason this was added
into the storage driver code, despite working entirely in terms of the
public APIs. Move it into the domain conf file and rename it to match the
object it modifies.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently virt drivers will call directly into the network driver impl
to allocate domain interface devices where type=network. This introduces
a callback system to allow us to decouple the virt drivers from the
network driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1461214
Since fec8f9c49a we try to use predictable file names for
'memory-backend-file' objects. But that made us provide full path
to qemu when hot plugging the object while previously we provided
merely a directory. But this makes qemu behave differently. If
qemu sees a path terminated with a directory it calls mkstemp()
and unlinks the file immediately. But if it sees full path it
just calls open(path, O_CREAT ..); and never unlinks the file.
Therefore it's up to libvirt to unlink the file and not leave it
behind.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In 2074ef6cd4 and c56cdf259 (and friends) we've added two
attributes to virtio NICs: rx_queue_size and tx_queue_size.
However, sysadmins might want to set these on per-host basis but
don't necessarily have an access to domain XML (e.g. because they
are generated by some other app). So let's expose them under
qemu.conf (the settings from domain XML still take precedence as
they are more specific ones).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Modify OPERATION_FAILED and INTERNAL_ERROR error codes to
use DEVICE_MISSING instead for failures associated with the
inability to find the device. This makes it easier for consumers
to key off the error code rather than the error message.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Now that the controller model is updated during post parse callback,
this code no longer needs to fetch the model based on the capabilities
and can just return the model directly if the controller is found.
Removal of @qemuCaps cascades through various callers which are now
updated to not pass the capabilities.
If we're going to add a controller to the domain, let's set the
default SCSI model value if we cannot find another SCSI controller
already present.
NB: Requires updating the live output test data since the model
will now be formatted.
Add a check if it's a iSCSI hostdev and if it's not then don't use the
union member 'iscsi'. The segmentation fault occured when accessing
secinfo->type, but this can vary from case to case.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Commit id '162efa1a' added support hotplug a redirdev, but
did not add the hot unplug. This patch will add that support
to allow usage of the detach-device --live on the device.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
When qemuDomainFindOrCreateSCSIDiskController adds a controller,
let's use the same model as a currently found controller under the
assumption that the reason to add the controller in hotplug is
because virDomainHostdevAssignAddress determined that there were
too many devices on the existing controller, but only assigned a
new controller index and did not add a new controller and we
desire to use the same controller model as any existing controller
and not take a chance that qemuDomainSetSCSIControllerModel would
use a default that may be incompatible.
Similar to qemuDomainAddChardevTLSObjects let's move the chardev
source must be TCP and it has the @haveTLS flag set checks before
trying to delete the TLS objects.
For the Chr device this represents no change; however, for RNG device
this is an additionaly check that was missed in commit id '68808516'.
Before adding the objects, TCP and haveTLS are checked.
Let's make a comment deletion helper similar to the Add helper
that can be called after the ExitMonitor.
The modify qemuDomainRemoveChrDevice and qemuDomainRemoveRNGDevice
to call the helper instead of inlining the copy and pasted code.
When the <bandwidth> of an interface is changed with update-device,
the old settings are cleared with tc, then new settings added with
tc. But if the <bandwidth has been removed, the old settings weren't
being removed, so the bandwidth restrictions would still be active on
the interface although the interface status in libvirt showed that
they had been removed.
This patch fixes it by calling virNetDevBandwidthClear() if the
"modification" to the interface bandwidth was to completely clear
it.
An alternative could have been to modify virNetDevBandwidthSet() to
always clear existing bandwith settings at the beginning of the
function (currently it short circuits in that case, doing nothing),
but that would have led to cases where virNetDevBandwidthClear() was
now being called in cases where it previously wasn't, and while many
of those cases would be NOPs, there could be cases where it would
cause an error. The way this patch works, the ...Clear() function is
only called in cases where the ...Set() function had previously been
called successfully, so the risk of regression is minimized.
Resolves: https://bugzilla.redhat.com/1454709
Also call qemuDomainRemoveInputDevice if we receive the
event after the Detach API ends.
Commit 67486bb failed to include this.
https://bugzilla.redhat.com/show_bug.cgi?id=1524837
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit id 'c5c96545' neglected to validate that the srcPriv was
non-NULL before dereferencing. Similar problem to what was fixed
by commit id '8056721c' but missed during multiple rebases and
code reworks.
https://bugzilla.redhat.com/show_bug.cgi?id=1425757
The blockdev-add code provides a mechanism to sanely provide user
and password-secret arguments for iscsi without placing them on the
command line to be viewable by a 'ps -ef' type command or needing
to create separate -iscsi devices for each disk/volume found.
So modify the iSCSI command line building to check for the presence
of the capability in order properly setup and use the domain master
secret object to encrypt the password in a secret object and alter
the parameters for the command line to utilize.
Modify the xml2argvtest to exhibit the syntax for both disk and
hostdev configurations.
Rather than picking apart the two pieces we need/want (path, hosts,
and auth)- let's allocate/use a virStorageSourcePtr for iSCSI storage.
The end result is that qemuBuildSCSIiSCSIHostdevDrvStr doesn't need
to "fake" one for the qemuBuildNetworkDriveStr call.
Move the setup of the disk attribute to the disk source prepare function
which will allow proper usage with JSON props and move the fallback
(legacy) generating code into the block which is executed with legacy
options.
As a side-effect of this change we can clean up propagation of 'cfg'
into the command generator.
Also it's nice to see that the test output is the same even when the
value is generated in a different place.
In some cases it does not make sense to pursue that the private data
will be allocated (especially when we don't need to put anything in it).
Ensure that the code works without it.
This also fixes few crashes pointed out in
https://bugzilla.redhat.com/show_bug.cgi?id=1510323
At the same time, move its internals into a separate function so
that they can be reused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since the encryption information can also be disk source specific
move it from qemuDomainDiskPrivate to qemuDomainStorageSourcePrivate
Since the last allocated element from qemuDomainDiskPrivate is
removed, that means we no longer need qemuDomainDiskPrivateDispose.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since the secret information is really virStorageSource specific
piece of data, let's manage the privateData from there instead of
at the Disk level.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Back in the times of using 'pci_del', unplugging a device without
a PCI address was not wired up.
After completely removing support for qemu without QEMU_CAPS_DEVICE,
aliases are used to uniquely identify devices in all cases.
Remove the pointless validation of data that was already present
in the domain definition.
There are two more cases where we set an S390/CCW/PCI address
type based on the machine type.
Reuse qemuDomainEnsureVirtioAddress to reduce repetition.
Split out the common code responsible for reserving/assigning
PCI/CCW addresses for virtio disks into a helper function
for reuse by other virtio devices.
We pass the source.file to qemuCheckCCWS390AddressSupport for
the purpose of reporting an error message without actually checking
that the rng device is of type VIR_DOMAIN_RNG_BACKEND_RANDOM.
Change it to a hardcoded "rng" string, which also avoids
referring to the device by a host-side attribute.
https://bugzilla.redhat.com/show_bug.cgi?id=1447169
Since domain can have at most one watchdog it simplifies things a
bit. However, since we must be able to set the watchdog action as
well, new monitor command needs to be used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Similarly to previous patch, for some types of interface domain
and host are on the same side of RX/TX barrier. In that case, we
need to set up the QoS differently. Well, swapped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Alter qemu command line generation in order to possibly add TLS for
a suitably configured domain.
Sample TLS args generated by libvirt -
-object tls-creds-x509,id=objvirtio-disk0_tls0,dir=/etc/pki/qemu,\
endpoint=client,verify-peer=yes \
-drive file.driver=vxhs,file.tls-creds=objvirtio-disk0_tls0,\
file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\
file.server.type=tcp,file.server.host=192.168.0.1,\
file.server.port=9999,format=raw,if=none,\
id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
id=virtio-disk0
Update the qemuxml2argvtest with a couple of examples. One for a
simple case and the other a bit more complex where multiple VxHS disks
are added where at least one uses a VxHS that doesn't require TLS
credentials and thus sets the domain disk source attribute "tls = 'no'".
Update the hotplug to be able to handle processing the tlsAlias whether
it's to add the TLS object when hotplugging a disk or to remove the TLS
object when hot unplugging a disk. The hot plug/unplug code is largely
generic, but the addition code does make the VXHS specific checks only
because it needs to grab the correct config directory and generate the
object as the command line would do.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
When the vcpu is successfully removed libvirt would remove the cgroup.
In cases when removal of the cgroup fails libvirt would report an error.
This does not make much sense, since the vcpu was removed and we can't
really do anything with the cgroup. This patch silences the errors from
cgroup removal.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1462092
Passing a NULL value for the argument secAlias to the function
qemuDomainGetTLSObjects would cause a segmentation fault in
libvirtd.
Changed code to check before dereferencing a NULL secAlias.
Signed-off-by: Ashish Mittal <ashmit602@gmail.com>
Some operations done to rollback disk image labelling and locking might
overwrite (or clear) the actual error. Remember the original error when
tearing down disk access so that it's not obscured.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1461301
There were a few places in our code where the following pattern in 'if'
condition occurred:
if ((foo = bar() < 0))
do something;
This patch adjusts the conditions to the expected format:
if ((foo = bar()) < 0)
do something;
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1488192
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1484230
When updating a virtio enabled vNIC and trying to change either
of rx_queue_size or tx_queue_size success is reported although no
operation is actually performed. Moreover, there's no way how to
change these on the fly. This is due to way we check for changes:
explicitly for each struct member. Therefore it's easy to miss
one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
A new function virNetDevOpenvswitchUpdateVlan has been created to instruct
OVS of the changes. qemuDomainChangeNet has been modified to handle the
update of the VLAN configuration for a running guest and rely on
virNetDevOpenvswitchUpdateVlan to do the actual update if needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
All the pieces are now in place, so we can finally start
using isolation groups to achieve our initial goal, which is
separating hostdevs from emulated PCI devices while keeping
hostdevs that belong to the same host IOMMU group together.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1280542
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
We will soon need to be able to return a NULL pointer
without the caller considering that an error: to make
it possible, change the return type to int and use
an out parameter for the string instead.
Add some documentation for the function as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
We use hostdev->info frequently enough that having
a shorter name for it makes the code more readable.
We will also be adding even more uses later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
vcpu 0 must be always enabled and non-hotpluggable, thus you can't
modify it using the vcpu hotplug APIs. Disallow it so that users can't
create invalid configurations.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1459785
It was added in commit 6c2e4c3856
so that Coverity would not complain about passing -1 to
qemuDomainDetachThisHostDevice(), but the function in question
has changed since and so the annotation doesn't apply anymore.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Change the settings from qemuDomainUpdateDeviceLive() as otherwise the
call would succeed even though nothing has changed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1414627
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1455819
It may happen that a domain is started without any huge pages.
However, user might try to attach a DIMM module later. DIMM
backed by huge pages (why would somebody want to mix regular and
huge pages is beyond me). Therefore we have to create the dir if
we haven't done so far.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
The virDomainUSBAddressEnsure returns 0 or -1, so commit id 'de325472'
checking for 1 like qemuDomainAttachChrDeviceAssignAddr was wrong.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1447618
Currently, any attempt to change MTU on an interface that is
plugged to a running domain is silently ignored. We should either
do what's asked or error out. Well, we can update the host side
of the interface, but we cannot change 'host_mtu' attribute for
the virtio-net device. Therefore we have to error out.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
https://bugzilla.redhat.com/show_bug.cgi?id=1408701
While implementing MTU (572eda12ad and friends), I've forgotten
to actually set MTU on the host NIC in case of hotplug. We
correctly tell qemu on the monitor what the MTU should be, but we
are not actually setting it on the host NIC.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
When adding the aliased serial stub console, the structure wasn't
properly allocated (VIR_ALLOC instead of virDomainChrDefNew) which then
resulted in SIGSEGV in virDomainChrSourceIsEqual during a serial device
coldplug.
https://bugzilla.redhat.com/show_bug.cgi?id=1434278
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This reverts commit 2841e675.
It turns out that adding the host_mtu field to the PCI capabilities in
the guest bumps the length of PCI capabilities beyond the 32 byte
boundary, so the virtio-net device gets 64 bytes of ioport space
instead of 32, which offsets the address of all the other following
devices. Migration doesn't work very well when the location and length
of PCI capabilities of devices is changed between source and
destination.
This means that we need to make sure that the absence/presence of
host_mtu on the qemu commandline always matches between source and
destination, which means that we need to make setting of host_mtu an
opt-in thing (it can't happen automatically when the bridge being used
has a non-default MTU, which is what commit 2841e675 implemented).
I do want to re-implement this feature with an <mtu auto='on'/>
setting, but probably won't backport that to any stable branches, so
I'm first reverting the original commit, and that revert can be pushed
to the few releases that have been made since the original (3.1.0 -
3.3.0)
Resolves: https://bugzilla.redhat.com/1449346
The error message would contain first vcpu id after the list of vcpus
selected for modification. To print the proper vcpu id remember the
first vcpu selected to be modified.
Adjust the current message to make it clear, that it is the hotplug
operation that is unsupported with the given host device type.
https://bugzilla.redhat.com/show_bug.cgi?id=1450072
Signed-off-by: Erik Skultety <eskultet@redhat.com>
As with virtio-scsi, the "internal error" messages after
preparing a vhost-scsi hostdev overwrites more meaningful
error messages deeper in the callchain. Remove it too.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
I tried to attach a SCSI LUN to two different guests, and forgot
to specify "shareable" in the hostdev XML. Attaching the device
to the second guest failed, but the message was not helpful in
telling me what I was doing wrong:
$ cat scsi_scratch_disk.xml
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host3'/>
<address bus='0' target='15' unit='1074151456'/>
</source>
</hostdev>
$ virsh attach-device dasd_sles_d99c scsi_scratch_disk.xml
Device attached successfully
$ virsh attach-device dasd_fedora_0e1e scsi_scratch_disk.xml
error: Failed to attach device from scsi_scratch_disk.xml
error: internal error: Unable to prepare scsi hostdev: scsi_host3:0:15:1074151456
I eventually discovered my error, but thought it was weird that
Libvirt doesn't provide something more helpful in this case.
Looking over the code we had just gone through, I commented out
the "internal error" message, and got something more useful:
$ virsh attach-device dasd_fedora_0e1e scsi_scratch_disk.xml
error: Failed to attach device from scsi_scratch_disk.xml
error: Requested operation is not valid: SCSI device 3:0:15:1074151456 is already in use by other domain(s) as 'non-shareable'
Looking over the error paths here, we seem to issue better
messages deeper in the callchain so these "internal error"
messages overwrite any of them. Remove them, so that the
more detailed errors are seen.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
it should be a comparison of modes between new and old devices. So
the argument of the second virDomainNetGetActualDirectMode should be
newdev.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
In the vcpu hotplug code if exit from the monitor failed we would still
attempt to save the status XML. When the daemon is terminated the
monitor socket is closed. In such case, the written status XML would not
contain the monitor path and thus be invalid.
Avoid this issue by only saving status XML on success of the monitor
command.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1439452
Introduce new wrapper functions without *Machine* in the function
name that take the whole virDomainDef structure as argument and
call the existing functions with *Machine* in the function name.
Change the arguments of existing functions to *machine* and *arch*
because they don't need the whole virDomainDef structure and they
could be used in places where we don't have virDomainDef.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Buggy condition meant that vcpu0 would not be iterated in the checks.
Since it's not hotpluggable anyways we would not be able to break the
configuration of a live VM.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1437013
A mediated device will be identified by a UUID (with 'model' now being
a mandatory <hostdev> attribute to represent the mediated device API) of
the user pre-created mediated device. We also need to make sure that if
user explicitly provides a guest address for a mdev device, the address
type will be matching the device API supported on that specific mediated
device and error out with an incorrect XML message.
The resulting device XML:
<devices>
<hostdev mode='subsystem' type='mdev' model='vfio-pci'>
<source>
<address uuid='c2177883-f1bb-47f0-914d-32a22e3a8804'>
</source>
</hostdev>
</devices>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Add an asyncJob argument for add/delete TLS Objects. A future patch will
add/delete TLS objects from a migration which may have a job to join.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Some users might want to pass a blockdev or a chardev as a
backend for NVDIMM. In fact, this is expected to be the mostly
used configuration. Therefore libvirt should allow the device in
devices CGroup then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have APIs for relabel memdevs on hotplug, fill in the
missing implementation in qemu hotplug code.
The qemuSecurity wrappers might look like overkill for now,
because qemu namespace code does not deal with the nvdimms yet.
Nor does our cgroup code. But hey, there's cgroup_device_acl
variable in qemu.conf. If users add their /dev/pmem* device in
there, the device is allowed in cgroups and created in the
namespace so they can successfully passthrough it to the domain.
It doesn't look like overkill after all, does it?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Frankly, this function is one big mess. A lot of arguments,
complicated behaviour. It's really surprising that arguments were
in random order (input and output arguments were mixed together),
the documentation was outdated, the description of return values
was bogus.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If the delivery of the DEVICE_DELETED event for the vCPU being deleted
would time out, the code would not call 'qemuDomainResetDeviceRemoval'.
Since the waiting thread did not unregister itself prior to stopping the
waiting the monitor code would try to wake it up instead of dispatching
it to the event worker. As a result the unplug process would not be
completed and the definition would not be updated.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1428893https://bugzilla.redhat.com/show_bug.cgi?id=1427801
Split apart and rename qemuDomainGetChardevTLSObjects in order to make a
more generic API that can create the TLS JSON prop objects (secret and
tls-creds-x509) to be used to create the objects
Signed-off-by: John Ferlan <jferlan@redhat.com>
Create a qemuDomainAddChardevTLSObjects which will encapsulate the
qemuDomainGetChardevTLSObjects and qemuDomainAddTLSObjects so that
the callers don't need to worry about the props.
Move the dev->type and haveTLS checks in to the Add function to avoid
an unnecessary call to qemuDomainAddTLSObjects
Signed-off-by: John Ferlan <jferlan@redhat.com>
Refactor the TLS object adding code to make two separate API's that will
handle the add/remove of the "secret" and "tls-creds-x509" objects including
the Enter/Exit monitor commands.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since qemuDomainObjExitMonitor can also generate error messages,
let's move it inside any error message saving code on error paths
for various hotplug add activities.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Now that we have some qemuSecurity wrappers over
virSecurityManager APIs, lets make sure everybody sticks with
them. We have them for a reason and calling virSecurityManager
API directly instead of wrapper may lead into accidentally
labelling a file on the host instead of namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These functions do not need to see the whole virDomainDiskDef.
Moreover, they are going to be called from places where we don't
have access to the full disk definition. Sticking with
virStorageSource is more than enough.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Again, one missed bit. This time without this commit there is no
/dev entry in the namespace of the qemu process when attaching
vhost SCSI device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since we have qemuSecurity wrappers over
virSecurityManagerSetHostdevLabel and
virSecurityManagerRestoreHostdevLabel we ought to use them
instead of calling secdriver APIs directly. Without those
wrappers the labelling won't be done in the correct namespace
and thus won't apply to the nodes seen by qemu itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
libvirt was able to set the host_mtu option when an MTU was explicitly
given in the interface config (with <mtu size='n'/>), set the MTU of a
libvirt network in the network config (with the same named
subelement), and would automatically set the MTU of any tap device to
the MTU of the network.
This patch ties that all together (for networks based on tap devices
and either Linux host bridges or OVS bridges) by learning the MTU of
the network (i.e. the bridge) during qemuInterfaceBridgeConnect(), and
returning that value so that it can then be passed to
qemuBuildNicDevStr(); qemuBuildNicDevStr() then sets host_mtu in the
interface's commandline options.
The result is that a higher MTU for all guests connecting to a
particular network will be plumbed top to bottom by simply changing
the MTU of the network (in libvirt's config for libvirt-managed
networks, or directly on the bridge device for simple host bridges or
OVS bridges managed outside of libvirt).
One question I have about this - it occurred to me that in the case of
migrating a guest from a host with an older libvirt to one with a
newer libvirt, the guest may have *not* had the host_mtu option on the
older machine, but *will* have it on the newer machine. I'm curious if
this could lead to incompatibilities between source and destination (I
guess it all depends on whether or not the setting of host_mtu has a
practical effect on a guest that is already running - Maxime?)
Likewise, we could run into problems when migrating from a newer
libvirt to older libvirt - The guest would have been told of the
higher MTU on the newer libvirt, then migrated to a host that didn't
understand <mtu size='blah'/>. (If this really is a problem, it would
be a problem with or without the current patch).
The current ordering is as follows:
1) set label
2) create the device in namespace
3) allow device in the cgroup
While this might work for now, it will definitely not work if the
security driver would use transactions as in that case there
would be no device to relabel in the domain namespace as the
device is created in the second step.
Swap steps 1) and 2) to allow security driver to use more
transactions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The event needs to be emitted after the last monitor call, so that it's
not possible to find the device in the XML accidentally while the vm
object is unlocked.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1414393
https://bugzilla.redhat.com/show_bug.cgi?id=1405269
If a secret was not provided for what was determined to be a LUKS
encrypted disk (during virStorageFileGetMetadata processing when
called from qemuDomainDetermineDiskChain as a result of hotplug
attach qemuDomainAttachDeviceDiskLive), then do not attempt to
look it up (avoiding a libvirtd crash) and do not alter the format
to "luks" when adding the disk; otherwise, the device_add would
fail with a message such as:
"unable to execute QEMU command 'device_add': Property 'scsi-hd.drive'
can't find value 'drive-scsi0-0-0-0'"
because of assumptions that when the format=luks that libvirt would have
provided the secret to decrypt the volume.
Access to unlock the volume will thus be left to the application.
When attaching a device to a domain that's using separate mount
namespace we must maintain /dev entries in order for qemu process
to see them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When attaching a device to a domain that's using separate mount
namespace we must maintain /dev entries in order for qemu process
to see them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When attaching a device to a domain that's using separate mount
namespace we must maintain /dev entries in order for qemu process
to see them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When attaching a device to a domain that's using separate mount
namespace we must maintain /dev entries in order for qemu process
to see them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Two reasons:
1.in none hotplug, we will pass it. We can see from libvirt function
qemuBuildVhostuserCommandLine
2.qemu will use this vetcor num to init msix table. If we don't pass, qemu
will use default value, this will cause VM can only use default value
interrupts at most.
Signed-off-by: gaohaifeng <gaohaifeng.gao@huawei.com>
Consider the following XML snippets:
$ cat scsicontroller.xml
<controller type='scsi' model='virtio-scsi' index='0'/>
$ cat scsihostdev.xml
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='8' unit='1074151456'/>
</source>
</hostdev>
If we create a guest that includes the contents of scsihostdev.xml,
but forget the virtio-scsi controller described in scsicontroller.xml,
one is silently created for us. The same holds true when attaching
a hostdev before the matching virtio-scsi controller.
(See qemuDomainFindOrCreateSCSIDiskController for context.)
Detaching the hostdev, followed by the controller, works well and the
guest behaves appropriately.
If we detach the virtio-scsi controller device first, any associated
hostdevs are detached for us by the underlying virtio-scsi code (this
is fine, since the connection is broken). But all is not well, as the
guest is unable to receive new virtio-scsi devices (the attach commands
succeed, but devices never appear within the guest), nor even be
shutdown, after this point.
While this is not libvirt's problem, we can prevent falling into this
scenario by checking if a controller is being used by any hostdev
devices. The same is already done for disk elements today.
Applying this patch and then using the XML snippets from earlier:
$ virsh detach-device guest_01 scsicontroller.xml
error: Failed to detach device from scsicontroller.xml
error: operation failed: device cannot be detached: device is busy
$ virsh detach-device guest_01 scsihostdev.xml
Device detached successfully
$ virsh detach-device guest_01 scsicontroller.xml
Device detached successfully
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
If libvirtd is running unprivileged, it can open a device's PCI config
data in sysfs, but can only read the first 64 bytes. But as part of
determining whether a device is Express or legacy PCI,
qemuDomainDeviceCalculatePCIConnectFlags() will be updated in a future
patch to call virPCIDeviceIsPCIExpress(), which tries to read beyond
the first 64 bytes of the PCI config data and fails with an error log
if the read is unsuccessful.
In order to avoid creating a parallel "quiet" version of
virPCIDeviceIsPCIExpress(), this patch passes a virQEMUDriverPtr down
through all the call chains that initialize the
qemuDomainFillDevicePCIConnectFlagsIterData, and saves the driver
pointer with the rest of the iterdata so that it can be used by
qemuDomainDeviceCalculatePCIConnectFlags(). This pointer isn't used
yet, but will be used in an upcoming patch (that detects Express vs
legacy PCI for VFIO assigned devices) to examine driver->privileged.
Adjust the device string that is built for vhost-scsi devices so that it
can be invoked from hotplug.
From the QEMU command line, the file descriptors are expect to be numeric only.
However, for hotplug, the file descriptors are expected to begin with at least
one alphabetic character else this error occurs:
# virsh attach-device guest_0001 ~/vhost.xml
error: Failed to attach device from /root/vhost.xml
error: internal error: unable to execute QEMU command 'getfd':
Parameter 'fdname' expects a name not starting with a digit
We also close the file descriptor in this case, so that shutting down the
guest cleans up the host cgroup entries and allows future guests to use
vhost-scsi devices. (Otherwise the guest will silently end.)
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
We already have a "scsi" hostdev subsys type, which refers to a single
LUN that is passed through to a guest. But what of things where
multiple LUNs are passed through via a single SCSI HBA, such as with
the vhost-scsi target? Create a new hostdev subsys type that will
carry this.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Just like in the previous commit, we are not updating CGroups on
chardev hot(un-)plug and thus leaving qemu unable to access any
non-default device users are trying to hotplug.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If users try to hotplug RNG device with a backend different to
/dev/random or /dev/urandom the whole operation fails as qemu is
unable to access the device. The problem is we don't update
device CGroups during the operation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Before now, all the qemu hotplug functions assumed that all devices to
be hotplugged were legacy PCI endpoint devices
(VIR_PCI_CONNECT_TYPE_PCI_DEVICE). This worked out "okay", because all
devices *are* legacy PCI endpoint devices on x86/440fx machinetypes,
and hotplug didn't work properly on machinetypes using PCIe anyway
(hotplugging onto a legacy PCI slot doesn't work, and until commit
b87703cf any attempt to manually specify a PCIe address for a
hotplugged device would be erroneously rejected).
This patch makes all qemu hotplug operations honor the pciConnectFlags
set by the single all-knowing function
qemuDomainDeviceCalculatePCIConnectFlags(). This is done in 3 steps,
but in a single commit since we would have to touch the other points
at each step anyway:
1) add a flags argument to the hypervisor-agnostic
virDomainPCIAddressEnsureAddr() (previously it hardcoded
..._PCI_DEVICE)
2) add a new qemu-specific function qemuDomainEnsurePCIAddress() which
gets the correct pciConnectFlags for the device from
qemuDomainDeviceConnectFlags(), then calls
virDomainPCIAddressEnsureAddr().
3) in qemu_hotplug.c replace all calls to
virDomainPCIAddressEnsureAddr() with calls to
qemuDomainEnsurePCIAddress()
So in effect, we're putting a "shim" on top of all calls to
virDomainPCIAddressEnsureAddr() that sets the right pciConnectFlags.
Coverity identified that this variable might be leaked. And it's
right. If an error occurred and we have to roll back the control
jumps to try_remove label where we save the current error (see
0e82fa4c34 for more info). However, inside the code a jump onto
other label is possible thus leaking the error object.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The memory device alias needs to be treated as machine ABI as qemu is
using it in the migration stream for section labels. To simplify this
generate the alias from the slot number unless an existing broken
configuration is detected.
With this patch the aliases are predictable and even certain
configurations which would not be migratable previously are fixed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1359135
As with other devices assign the slot number right away when adding the
device. This will make the slot numbers static as we do with other
addressing elements and it will ultimately simplify allocation of the
alias in a static way which does not break with qemu.
https://bugzilla.redhat.com/show_bug.cgi?id=1386976
We have everything ready. Actually the only limitation was our
check that denied hotplug of vhost-user.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If there is an error hotpluging a net device (for whatever
reason) a rollback operation is performed. However, whilst doing
so various helper functions that are called report errors on
their own. This results in the original error to be overwritten
and thus misleading the user.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Propagate the selected or default level to qemu if it's supported.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1376009
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This is needed in order to migrate a domain with shmem devices as that
is not allowed to migrate.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Return 0 instead of 1, so that qemuDomainAttachChrDevice does not
assume the address neeeds to be released on error.
No functional change, since qemuDomainReleaseDeviceAddress has been a noop
for virtio serial addresses since the address cache was removed
in commit 19a148b.
This time do not require an address cache as a parameter.
Simplify qemuDomainAttachChrDeviceAssignAddr to not generate
the virtio serial address cache for devices of other types.
Partially reverts commit 925fa4b.
Commit 19a148b dropped the cache from QEMU's private domain object.
Assume the callers do not have the cache by default and use
a longer name for the internal ones that do.
This makes the shorter 'virDomainVirtioSerialAddrAutoAssign'
name availabe for a function that will not require the cache.
Support for virtio disks was added in commit id 'fceeeda', but not for
SCSI drives. Add the secret for the server when hotplugging a SCSI drive.
No need to make any adjustments for unplug since that's handled during
the qemuDomainDetachDiskDevice call to qemuDomainRemoveDiskDevice in
the qemuDomainDetachDeviceDiskLive switch.
Added a test to/for the command line processing to show the command line
options when adding a SCSI drive for the guest.
https://bugzilla.redhat.com/show_bug.cgi?id=1300776
Complete the implementation of support for TLS encryption on
chardev TCP transports by adding the hotplug ability of a secret
to generate the passwordid for the TLS object for chrdev, RNG,
and redirdev.
Fix up the order of object removal on failure to be the inverse
of the attempted attach (for redirdev, chr, rng) - for each the
tls object was being removed before the chardev backend.
Likewise, add the ability to hot unplug that secret object as well
and be sure the order of unplug matches that inverse order of plug.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add the secret object so the 'passwordid=' can be added if the command line
if there's a secret defined in/on the host for TCP chardev TLS objects.
Preparation for the secret involves adding the secinfo to the char source
device prior to command line processing. There are multiple possibilities
for TCP chardev source backend usage.
Add test for at least a serial chardev as an example.
Need to remove the drive first, then the secobj and/or encobj if they exist.
This is because the drive has a dependency on secobj (or the secret for
the networked storage server) and/or the encobj (or the secret for the
LUKS encrypted volume). Deleting either object first leaves an drive
without it's respective objects.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id '2c32237' added the TLS object removal to the DetachChrDevice
all when it should have been added to the RemoveChrDevice since that's
the norm for similar processing (e.g. disk)
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add an optional "tls='yes|no'" attribute for a TCP chardev.
For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Currently the union has only one member so remove that union. If there
is a need to add a new type of source for new bus in the future this
will force the author to add a union and properly check bus type before
any access to union member.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit id '2c322378' missed the nuance that the rng backend could be
using a TCP chardev and if TLS is enabled on the host, thus will need
to have the TLS object added.
Commit id '2c322378' missed the nuance that the redirdev backend could
be using a TCP chardev and if TLS is enabled on the host, thus will need
to have the TLS object added.
Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainRedirdevDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
from virDomainDefPtr to virDomainObjPtr so that the function has
access to the other parts of the virDomainObjPtr. Take advantage of
this by removing the "priv" arg and retrieving it from the
virDomainObjPtr instead.
No functional change.
Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.
This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: John Ferlan <jferlan@redhat.com>
There was inconsistency between alias used to create tls-creds-x509
object and alias used to link that object to chardev while hotpluging.
Hotplug ends with this error:
error: Failed to detach device from channel-tcp.xml
error: internal error: unable to execute QEMU command 'chardev-add':
No TLS credentials with id 'objcharchannel3_tls0'
In XML we have for example alias "serial0", but on qemu command line we
generate "charserial0".
The issue was that code, that creates QMP command to hotplug chardev
devices uses only the second alias "charserial0" and that alias is also
used to link the tls-creds-x509 object.
This patch unifies the aliases for tls-creds-x509 to be always generated
from "charserial0".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We need to make sure that the chardev is TCP. Without this check we
may access different part of union and corrupt pointers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1366108
There are couple of things that needs to be done in order to
allow vhost-user hotplug. Firstly, vhost-user requires a chardev
which is connected to vhost-user bridge and through which qemu
communicates with the bridge (no acutal guest traffic is sent
through there, just some metadata). In order to generate proper
chardev alias, we must assign device alias way sooner.
Then, because we are plugging the chardev first, we need to do
the proper undo if something fails - that is remove netdev too.
We don't want anything to be left over in case attach fails at
some point.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of blindly claim support for hot-plugging of every
interface type out there we should copy approach we have for
device types: white listing supported types and explicitly error
out on unsupported ones.
For instance, trying to hotplug vhostuser interface results in
nothing usable from guest currently. vhostuser typed interfaces
require additional work on our side.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking at its
beginning and then have one big switch for all the interface
types it supports.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Qemu always opens the tray if forced to. Skip the waiting step in such
case.
This also helps if qemu does not report the tray change event when
opening the cdrom forcibly (the documentation says that the event will
not be sent although qemu in fact does trigger it even if @force is
selceted).
This is a workaround for a qemu issue where qemu does not send the tray
change event in some cases (after migration with empty closed locked
drive) and thus renders the cdrom useless from libvirt's point of view.
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1368368
If the incoming XML defined a path to a TLS X.509 certificate environment,
add the necessary 'tls-creds-x509' object to the VIR_DOMAIN_CHR_TYPE_TCP
character device.
Likewise, if the environment exists the hot unplug needs adjustment as
well. Note that all the return ret were changed to goto cleanup since
the cfg needs to be unref'd
Signed-off-by: John Ferlan <jferlan@redhat.com>
The linkstate setting of an <interface> is only meant to change the
online status reported to the guest system by the emulated network
device driver in qemu, but when support for auto-creating tap devices
for <interface type='ethernet'> was added in commit 9717d6, a chunk of
code was also added to qemuDomainChangeNetLinkState() that sets the
online status of the tap device (i.e. the *host* side of the
interface) for type='ethernet'. This was never done for tap devices
used in type='bridge' or type='network' interfaces, nor was it done in
the past for tap devices created by external scripts for
type='ethernet', so we shouldn't be doing it now.
This patch removes the bit of code in qemuDomainChangeNetLinkState()
that modifies online status of the tap device.
This patch removes the old vcpu unplug code completely and replaces it
with the new code using device_del. The old hotplug code basically never
worked with any recent qemu and thus is useless.
As the new code is using device_del all the implications of using it
are present. Contrary to the device deletion code, the vcpu deletion
code fails if the unplug request is not executed in time.
https://bugzilla.redhat.com/show_bug.cgi?id=1289391
Rather than pass the whole drive string (which contained the alias),
pass only the alias for the qemuMonitorDriveDel call in the error
path when adding a host device in the monitor fails.
Partial fix for:
https://bugzilla.redhat.com/show_bug.cgi?id=1336225
Similar to the other disk types, add the qemuMonitorDriveDel in the failure
to add/hotplug a USB.
Added a couple of other formatting changes just to have a less cluttered look
Since we already have a function that will generate the drivestr from
the alias, let's use it and remove the qemuDeviceDriveHostAlias.
Move the QEMU_DRIVE_HOST_PREFIX definition into qemu_alias.h
Also alter qemuAliasFromDisk to use the QEMU_DRIVE_HOST_PREFIX instead
of "drive-%s".
The current LUKS support has a "luks" volume type which has
a "luks" encryption format.
This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)
IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.
IOW, when creating a storage volume we should use this XML
<volume>
<name>demo.raw</name>
<capacity>5368709120</capacity>
<target>
<format type='raw'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</target>
</volume>
and when configuring a guest disk we should use
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/home/berrange/VirtualMachines/demo.raw'/>
<target dev='sda' bus='scsi'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</disk>
This commit thus removes the "luks" storage volume type added
in
commit 318ebb36f1
Author: John Ferlan <jferlan@redhat.com>
Date: Tue Jun 21 12:59:54 2016 -0400
util: Add 'luks' to the FileTypeInfo
The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.
The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.
The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format. I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Dropping the caching of virtio serial address set.
Instead of using the cached address set, a function in qemu_hotplug.c
now recalculates it on demand.
Credit goes to Cole Robinson.
Since return code is checked globally at the end of the function, let's
make sure that we set it correctly at any point.
This fixes a regression introduced in commit 0aa19f35 where the first
command to eject changeable media would fail unconditionally.
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1301021
Generate the luks command line using the AES secret key to encrypt the
luks secret. A luks secret object will be in addition to a an AES secret.
For hotplug, check if the encinfo exists and if so, add the AES secret
for the passphrase for the secret object used to decrypt the device.
Modify/augment the fakeSecret* in qemuxml2argvtest in order to handle
find a uuid or a volume usage with a specific path prefix in the XML
(corresponds to the already generated XML tests). Add error message
when the 'usageID' is not 'mycluster_myname'. Commit id '1d632c39'
altered the error message generation to rely on the errors from the
secret_driver (or it's faked replacement).
Add the .args output for adding the LUKS disk to the domain
Signed-off-by: John Ferlan <jferlan@redhat.com>
Soon we will be adding luks encryption support. Since a volume could require
both a luks secret and a secret to give to the server to use of the device,
alter the alias generation to create a slightly different alias so that
we don't have two objects with the same alias.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id 'a1344f70a' added AES secret processing for RBD when starting
up a guest. As such, when the hotplug code calls qemuDomainSecretDiskPrepare
an AES secret could be added to the disk about to be hotplugged. If an AES
secret was added, then the hotplug code would need to generate the secret
object because qemuBuildDriveStr would add the "password-secret=" to the
returned 'driveStr' rather than the base64 encoded password.
Signed-off-by: John Ferlan <jferlan@redhat.com>
A recent adjustment to qemuDomainAttachRNGDevice to properly cleanup
the props object after a qemuMonitorAddObject also would affect this
code. Alter the cleanup to be similar to RNG changes.
Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.
Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.
Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.
Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.
Based on recent review comment - rather than have a spate of goto failxxxx,
change to a boolean based model. Ensures that the original error can be
preserved and cleanup is a bit more orderly if more objects are added.
Ensure that the given controller and all controllers with a smaller
index exist; there must not be any missing index in between.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
The commit "qemu: hot-plug: Assume support for -device in
qemuDomainAttachSCSIDisk" dropped the code for the automatic SCSI
controller creation used in SCSI disk hot-plugging. If we are
hot-plugging a SCSI disk to a domain and there is no proper SCSI
controller defined, it results in an "error: internal error: Could not
find scsi controller with index X required for device" error.
For that reason reverting a hunk of the commit
d4d32005d6.
This patch also adds an extra comment to the code to clarify the
loop.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
CVE-2016-5008
Setting an empty graphics password is documented as a way to disable
VNC/SPICE access, but QEMU does not always behaves like that. VNC would
happily accept the empty password. Let's enforce the behavior by setting
password expiration to "now".
https://bugzilla.redhat.com/show_bug.cgi?id=1180092
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When support for <interface type='ethernet'> was added in commit
9a4b705f back in 2010, it erroneously looked at <source dev='blah'/>
for a user-specified guest-side interface name. This was never
documented though. (that attribute already existed at the time in the
data.ethernet union member of virDomainNetDef, but apparently had no
practical use - it was only used as a storage place for a NetDef's
bridge name during qemuDomainXMLToNative(), but even then that was
never used for anything).
When support for similar guest-side device naming was added to the lxc
driver several years later, it was put in a new subelement <guest
dev='blah'/>.
In the intervening years, since there was no validation that
ethernet.dev was NULL in the other drivers that didn't actually use
it, innocent souls who were adding other features assuming they needed
to account for non-NULL ethernet.dev when really they didn't, so
little bits of the usual pointless cargo-cult code showed up.
This patch not only switches the openvz driver to use the documented
<guest dev='blah'/> notation for naming the guest-side device (just in
case anyone is still using the openvz driver), and logs an error if
anyone tries to set <source dev='blah'/> for a type='ethernet'
interface, it also removes the cargo-cult uses of ethernet.dev and
<source dev='blah'/>, and eliminates if from the RNG and from
virDomainNetDef.
NB: I decided on this course of action after mentioning the
inconsistency here:
https://www.redhat.com/archives/libvir-list/2016-May/msg02038.html
and getting encouragement do eliminate it in a later IRC discussion
with danpb.
