This bug resolves https://bugzilla.redhat.com/show_bug.cgi?id=810100
rpm builds for i686 were failing with a segfault in
networkxml2argvtest. Running under valgrind showed that a region of
memory was being referenced after it had been freed (as the result of
realloc - see the valgrind report in the BZ).
The problem (in replaceTokens() - added in commit 22ec60, meaning this
bug was in 0.9.10 and 0.9.11) was that the pointers token_start and
token_end were being computed based on the value of *buf, then *buf
was being realloc'ed (potentially moving it), then token_start and
token_end were used without recomputing them to account for movement
of *buf.
The solution is to change the code so that token_start and token_end
are offsets into *buf rather than pointers. This way there is only a
single pointer to the buffer, and nothing needs readjusting after a
realloc. (You may note that some uses of token_start/token_end didn't
need to be changed to add in "*buf +" - that's because there ended up
being a +*buf and -*buf which canceled each other out).
DV gets the credit for finding this bug and pointing out the valgrind
report.
Detected by valgrind. Leaks are introduced in commit b22eaa7.
* src/conf/domain_conf.c (virDomainDiskDefParseXML): fix memory leaks.
How to reproduce?
% make && make -C tests check TESTS=qemuxml2argvtest
% cd tests && valgrind -v --leak-check=full ./qemuxml2argvtest
actual result:
==2143== 12 bytes in 2 blocks are definitely lost in loss record 74 of 179
==2143== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==2143== by 0x39D90A67DD: xmlStrndup (xmlstring.c:45)
==2143== by 0x4F5EC0: virDomainDiskDefParseXML (domain_conf.c:3438)
==2143== by 0x502F00: virDomainDefParseXML (domain_conf.c:8304)
==2143== by 0x505FE3: virDomainDefParseNode (domain_conf.c:9080)
==2143== by 0x5069AE: virDomainDefParse (domain_conf.c:9030)
==2143== by 0x41CBF4: testCompareXMLToArgvHelper (qemuxml2argvtest.c:105)
==2143== by 0x41E5DD: virtTestRun (testutils.c:145)
==2143== by 0x416FA3: mymain (qemuxml2argvtest.c:399)
==2143== by 0x41DCB7: virtTestMain (testutils.c:700)
==2143== by 0x39CF01ECDC: (below main) (libc-start.c:226)
Signed-off-by: Alex Jia <ajia@redhat.com>
* configure.ac: Set WITH_SYSCTL only on Linux hosts
* daemon/Makefile.am: Conditionalize install-sysctl using WITH_SYSCTL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Cc: Jason Helfman <jhelfman@e-e.com>
Every now & then, with parallel builds, we get a failure to
validate hvsupport.html.in. I eventually noticed that this
is because we get 2 instances of the generator running at
once.
We already list hvsupport.html.in in BUILT_SOURCES but this
was not working. It turns out the flaw is that we were
adding deps to the 'all:' target instead of the 'all-am:'
target. BUILT_SOURCES is a dep of 'all', so any custom
targets written in Makefile.am must use 'all-am:' so that
they don't get run until BUILT_SOURCES are completely
generated
* docs/Makefile.am: s/all/all-am/
Some of the test suites use fprintf with format specifiers
that are not supported on Win32 and are not fixed by gnulib.
The mingw32 compiler also has trouble detecting ssize_t
correctly, complaining that 'ssize_t' does not match
'signed size_t' (which it expects for %zd). Force the
cast to size_t to avoid this problem
* tests/testutils.c, tests/testutils.h: Fix printf
annotation on virTestResult. Use virVasprintf
instead of vfprintf
* tests/virhashtest.c: Use VIR_WARN instead of fprintf(stderr).
Cast to size_t to avoid mingw32 compiler bug
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the daemon is restarted it will lose list of active
USB devices assigned to active domains. Therefore we need
to rebuild this list on qemuProcessReconnect().
To prevent assigning one USB device to two domains,
we keep a list of assigned USB devices. On domain
startup - qemuProcessStart() - we insert devices
used by domain into the list but remove them only
on detach-device. Devices are, however, released
on qemuProcessStop() as well.
Introduce a set sub-RPMs, one per hypervisor, which can be used
as dependency targets by applications wishing to pull in the
full stack of packages required for a specific hypervisor. This
avoids the application needing to know what the hypervisor specific
package set is.
ie, applications should not need to know that using the libvirt
Xen hypervisor requires the 'xen' RPM - libvirt should take care
of that knowledge. All the application wants is 'libvirt-daemon-xen'
There are 5 sub-RPMs:
libvirt-daemon-qemu - non-native TCG based emulators
libvirt-daemon-kvm - native KVM hypervisor
libvirt-daemon-uml - User Mode linux
libvirt-daemon-xen - Xen, either via XenD or libxl
libvirt-daemon-lxc - Linux native containers
When driver modules get turned on, these sub-RPMs will also
gain dependencies on the appropriate driver module .so files
Take the libvirt RPM and split it into three pieces
- libvirt-daemon - libvirtd & other mandatory bits for its operation
- libvirt-daemon-config-network - the virbr0 config definition
- libvirt-daemon-config-nwfilter - the firewall config rules
For backwards compatibility with existing installs / application RPM
deps, the 'libvirt' RPM is retained, but will have a dependency on
the 3 new RPMs.
Currently documentation is split between the libvirt RPM and the
libvirt-devel RPM. In the client-only build there is no libvirt
RPM, so the docs need to live elsewhere. The obvious answer is a
dedicated libvirt-docs RPM. For back-compatibility make the
libvirt-devel RPM require the libvirt-docs RPM
* libvirt.spec.in: Create separate libvirt-docs RPM
Currently, we put no strains on escape sequence possibly leaving users
with console that cannot be terminated. However, not all ASCII
characters can be used as escape sequence. Only those falling in
@ - _ can be; implement and document this constraint.
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: updated a number of languages translation including new
indian languages and regenerated
Originally, qemuDomainCheckEjectableMedia was entering monitor with qemu
driver lock. Commit 2067e31bf9, which I
made to fix that, revealed another issue we had (but didn't notice it
since the driver was locked): we didn't set nested job when
qemuDomainCheckEjectableMedia is called during migration. Thus the
original fix I made was wrong.
XenD-3.1 introduced managed domains. HV-domains have rtc_timeoffset
(hgd24f37b31030 from 2007-04-03), which tracks the offset between the
hypervisors clock and the domains RTC, and is persisted by XenD.
In combination with localtime=1 this had a bug until XenD-3.4
(hg5d701be7c37b from 2009-04-01) (I'm not 100% sure how that bug
manifests, but at least for me in TZ=Europe/Berlin I see the previous
offset relative to utc being applied to localtime again, which manifests
in an extra hour being added)
XenD implements the following variants for clock/@offset:
- PV domains don't have a RTC → 'localtime' | 'utc'
- <3.1: no managed domains → 'localtime' | 'utc'
- ≥3.1: the offset is tracked for HV → 'variable'
due to the localtime=1 bug → 'localtime' | 'utc'
- ≥3.4: the offset is tracked for HV → 'variable'
Current libvirtd still thinks XenD only implements <clock offset='utc'/>
and <clock offset='localtime'/>, which is wrong, since the semantic of
'utc' and 'localtime' specifies, that the offset will be reset on
domain-restart, while with 'variable' the offset is kept. (keeping the
offset over "virsh edit" is important, since otherwise the clock might
jump, which confuses certain guest OSs)
xendConfigVersion was last incremented to 4 by the xen-folks for
xen-3.1.0. I know of no way to reliably detect the version of XenD
(user space tools), which may be different from the version of the
hypervisor (kernel) version! Because of this only the change from
'utc'/'localtime' to 'variable' in XenD-3.1 is handled, not the buggy
behaviour of XenD-3.1 until XenD-3.4.
For backward compatibility with previous versions of libvirt Xen-HV
still accepts 'utc' and 'localtime', but they are returned as 'variable'
on the next read-back from Xend to libvirt, since this is what XenD
implements: The RTC is NOT reset back to the specified time on next
restart, but the previous offset is kept.
This behaviour can be turned off by adding the additional attribute
adjustment='reset', in which case libvirt will report an error instead
of doing the conversion. The attribute can also be used as a shortcut to
offset='variable' with basis='...'.
With these changes, it is also necessary to adjust the xen tests:
"localtime = 0" is always inserted, because otherwise on updates the
value is not changed within XenD.
adjustment='reset' is inserted for all cases, since they're all <
XEND_CONFIG_VERSION_3_1_0, only 3.1 introduced persistent
rtc_timeoffset.
Some statements change their order because code was moved around.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Since Xen 3.1 the clock=variable semantic is supported. In addition to
qemu/kvm Xen also knows about a variant where the offset is relative to
'localtime' instead of 'utc'.
Extends the libvirt structure with a flag 'basis' to specify, if the
offset is relative to 'localtime' or 'utc'.
Extends the libvirt structure with a flag 'reset' to force the reset
behaviour of 'localtime' and 'utc'; this is needed for backward
compatibility with previous versions of libvirt, since they report
incorrect XML.
Adapt the only user 'qemu' to the new name.
Extend the RelaxNG schema accordingly.
Document the new 'basis' attribute in the HTML documentation.
Adapt test for the new attribute.
Signed-off-by: Philipp Hahn <hahn@univention.de>
https://bugzilla.redhat.com/show_bug.cgi?id=808979
The leak is really in virProcessInfoGetAffinity, as shown in the
valgrind output given in the above bug report - it calls CPU_ALLOC(),
but then fails to call CPU_FREE().
This leak has existed in every version of libvirt since 0.7.5.
Commit 1b1402b introduced a regression. Since older libvirt versions
would silently round memory up (until the previous patch), but populated
current memory based on querying the guest, it was possible to have
dumpxml show cur > max by the amount of the rounding. For example, if
a user requested 1048570 KiB memory (just shy of 1GiB), the qemu
driver would actually run with 1048576 KiB, and libvirt 0.9.10 would
output a current that was 6KiB larger than the maximum. Situations
where this could have an impact include, but are not limited to,
migration from old to new libvirt, managedsave in old libvirt and
start in new libvirt, snapshot creation in old libvirt and revert in
new libvirt - without this patch, the new libvirt would reject the
VM because of the rounding discrepancy.
Fix things by adding a fuzz factor, and silently clamp current down to
maximum in that case, rather than failing to reparse XML for an existing
VM. From a practical standpoint, this has no user impact: 'virsh
dumpxml' will continue to query the running guest rather than rely on
the incoming xml, which will see the currect current value, and even if
clamping down occurs during parsing, it will be by at most the fuzz
factor of a megabyte alignment, and rounded back up when passed back to
the hypervisor.
Meanwhile, we continue to reject cur > max if the difference is beyond
the fuzz factor of nearest megabyte. But this is not a real change in
behavior, since with 0.9.10, even though the parser allowed it, later
in the processing stream we would reject it at the qemu layer; so
rejecting it in the parser just moves error detection to a nicer place.
* src/conf/domain_conf.c (virDomainDefParseXML): Don't reject
existing XML.
Based on a report by Zhou Peng.
If we round up a user's memory request, we should update the XML
to reflect the actual value in use by the VM, rather than giving
an artificially small value back to the user.
* src/qemu/qemu_command.c (qemuBuildNumaArgStr)
(qemuBuildCommandLine): Reflect rounding back to XML.
Laszlo Ersek pointed out that in trying to convert a long to an
unsigned int, we used:
long long_val = ...;
if ((unsigned int)long_val == long_val)
According to C99 integer promotion rules, the if statement is
equivalent to:
(unsigned long)(unsigned int)long_val == (unsigned long)long_val
since you get an unsigned comparison if at least one side is
unsigned, using the largest rank of the two sides; but on 32-bit
platforms, where unsigned long and unsigned int are the same size,
this comparison is always true and ends up converting negative
long_val into posigive unsigned int values, rather than rejecting
the negative value as we had originally intended (python longs
are unbounded size, and we don't want to do silent modulo
arithmetic when converting to C code).
Fix this by using direct comparisons, rather than casting.
* python/typewrappers.c (libvirt_intUnwrap, libvirt_uintUnwrap)
(libvirt_ulongUnwrap, libvirt_ulonglongUnwrap): Fix conversion
checks.
* libvirt.spec.in: Remove obsolete --with-remote-pid-file arg.
Add missing %{without_libxl} statement. Fix handling of docs
in client only build. Put systemtap files in -client RPM
instead of -daemon RPM
* examples/xml/nwfilter/Makefile.am: Don't install examples if
nwfilter is disabled.
There are a number of flaws with our packaging of the libvirtd
daemon:
- Installing 'libvirt' does not install 'qemu-kvm' or 'xen'
etc which are required to actually run the hypervisor in
question
- Installing 'libvirt' pulls in the default configuration
files which may not be wanted & cause problems if installed
inside a guest
- It is not possible to explicitly required all the peices
required to manage a specific hypervisor
This change takes the 'libvirt' RPM and and changes it thus
- libvirt: just a virtual package with dep on libvirt-daemon,
libvirt-daemon-config-network & libvirt-daemon-config-nwfilter
- libvirt-daemon: the libvirt daemon and related pieces
- libvirt-daemon-config-network: the default network config
- libvirt-daemon-config-nwfilter: the network filter configs
- libvirt-docs: the website HTML
We then introduce some more virtual (empty) packages
- libvirt-daemon-qemu: Deps on libvirt-daemon & 'qemu'
- libvirt-daemon-kvm: Deps on libvirt-daemon & 'qemu-kvm'
- libvirt-daemon-lxc: Deps on libvirt-daemon
- libvirt-daemon-uml: Deps on libvirt-daemon
- libvirt-daemon-xen: Deps on libvirt-daemon & 'xen'
- libvirt-qemu: Deps on libvirt-daemon-qemu & libvirt-daemon-config-{network,nwfilter}
- libvirt-kvm: Deps on libvirt-daemon-kvm & libvirt-daemon-config-{network,nwfilter}
- libvirt-lxc: Deps on libvirt-daemon-lxc & libvirt-daemon-config-{network,nwfilter}
- libvirt-uml: Deps on libvirt-daemon-uml & libvirt-daemon-config-{network,nwfilter}
- libvirt-xen: Deps on libvirt-daemon-xen & libvirt-daemon-config-network
My intent in the future is to turn on the driver modules by
default, at which time 'libvirt-daemon' will cease to include
any specific drivers, instead we'll get libvirt-daemon-driver-XXXX
packages for each driver. The libvirt-daemon-XXX packages will
then pull in each driver that they require.
It is recommended that applications required a locally installed
libvirtd daemon, use either 'Requires: libvirt-daemon-XXXX' or
'Requires: libvirt-XXX' and *not* "Requires: libvirt-daemon"
or 'Requires: libvirt'
* libvirt.spec.in: Refactor RPMs
* docs/packaging.html.in, docs/sitemap.html.in: Document
new RPM split rationale
This patch was created to resolve this upstream bug:
https://bugzilla.redhat.com/show_bug.cgi?id=784767
and is at least a partial solution to this RHEL RFE:
https://bugzilla.redhat.com/show_bug.cgi?id=805071
Previously the only attribute of a network device that could be
modified by virUpdateDeviceFlags() ("virsh update-device") was the
link state; attempts to change any other attribute would log an error
and fail.
This patch adds recognition of a change in bridge device name, and
supports reconnecting the guest's interface to the new device.
Standard audit logs for detaching and attaching a network device are
also generated. Although the current auditing function doesn't log the
bridge being attached to, this will later be changed in a separate
patch.
Regression introduced when we changed types in commit 3e2c3d8f6.
We've done this sort of cleanup before (see commit c685993d7).
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolTargetDefFormat): Cast gid_t and uid_t.
We are so close to a release that we don't want to pull in a
gnulib submodule update and risk regressions, since there has
been a lot of other gnulib churn upstream. However, there are
a couple of gnulib issues that are worth fixing in isolation,
by applying local patches to gnulib.
There was an upstream gnulib bug in maint.mk that rendered most
of our syntax checks ineffective (and fixing it flushed out a
minor bug in our code):
https://lists.gnu.org/archive/html/bug-gnulib/2012-03/msg00194.html
There is still an upstream bug where gnulib uses the wrong type
for ssize_t on mingw; we need the fix now even though it has not
yet been accepted into gnulib:
https://lists.gnu.org/archive/html/bug-gnulib/2012-03/msg00188.html
* gnulib/local/top/maint.mk.diff: Pick up upstream gnulib
maint.mk.
* gnulib/local/m4/ssize_t.m4.diff: Work around gnulib bug.
* src/libvirt.c: Remove unused header.
* cfg.mk
(exclude_file_name_regexp--sc_prohibit_empty_lines_at_EOF): Exempt
gnulib local files.
qemuBuildHostNetStr had a switch-within-a-switch where both were
looking at the same variable. This was apparently to take advantage of
code common to three different cases (while also taking care of some
code that was different). However, there were only 2 lines common to
all, one of those can be eliminated by merging it into the
virAsprintfs that are in each case. On top of that, all the extra
empty cases cause Coverity complaints (because they are unreachable),
but absence of the empty cases causes a compile error due to
"enumeration value not handled in switch".
The solution is to just make each toplevel case independent, folding
in the common code to each.
commit b0e2bb33 set a default value for the SPICE agent channel by
inserting it during parsing of the channel XML. That method of setting
a default is problematic because it makes a format/parse roundtrip
unclean, and experience with setting other values as a side effect of
parsing has led to headaches (e.g. automatically setting a MAC address
in the parser when one isn't specified in the input XML).
This patch does not revert commit b0e2bb33 (it will be reverted in a
separate patch) but adds the alternate implementation of simply
inserting the default value in the appropriate place on the qemu
commandline when no value is provided.
If we issue guest command and GA is not running, the issuing thread
will block endlessly. We can check for GA presence by issuing
guest-sync with unique ID (timestamp). We don't want to issue real
command as even if GA is not running, once it is started, it process
all commands written to GA socket.
With latest gnulib we are checking even the lowest level functions
whether they check flags. Moreover, we are shadowing the real error
on system without TUNSETIFF support.
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The commandhelper.c & ssh.c programs rely on various APIs not present
on Win32. Disable them, since the tests that uses these helpers are
already disabled
* tests/commandhelper.c, tests/ssh.c: Disable on WIN32
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Defining an enum with names like "ERROR" causes a world of
hurt on Win32 whose headers have such symbol names already
* tests/cputest.c: Remove redefinition of CPU constants
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A handful of places used %zd for format specifiers even
though the args was size_t, not ssize_t.
* src/remote/remote_driver.c, src/util/xml.c: s/%zd/%zu/
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* src/conf/domain_conf.c (virDomainChannelDefCheckABIStability): avoid
crashing libvirtd due to derefing a NULL pointer.
For details, please see bug:
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=808371
Signed-off-by: Alex Jia <ajia@redhat.com>
When qemu cannot start, we may call qemuProcessStop() twice.
We have check whether the vm is running at the beginning of
qemuProcessStop() to avoid libvirt deadlock. We call
qemuProcessStop() with driver and vm locked. It seems that
we can avoid libvirt deadlock. But unfortunately we may
unlock driver and vm in the function qemuProcessKill() while
vm->def->id is not -1. So qemuProcessStop() will be run twice,
and monitor will be freed unexpectedly. So we should set
vm->def->id to -1 at the beginning of qemuProcessStop().
An upstream gnulib bug[1] meant that some of our syntax checks
weren't being run. Fix up our offenders before we upgrade to
a newer gnulib.
[1] https://lists.gnu.org/archive/html/bug-gnulib/2012-03/msg00194.html
* src/util/virnetdevtap.c (virNetDevTapCreate): Use flags.
* tests/lxcxml2xmltest.c (mymain): Strip useless ().
