Similar to the Set*Mem commands, this implementation was bogus and
misleading. Make it clear this is a hotplug only operation, and that the
hotplug piece isn't even implemented.
Also drop the overkill maxvcpus validation: we don't perform this check
at XML define time so clearly no one is missing it, and there is
always the risk that our info will be out of date, possibly preventing
legitimate CPU values.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
SetMem and SetMaxMem are hotplug only APIs, any persistent config
changes are supposed to go via XML definition. The original implementation
of these calls were incorrect and had the nasty side effect of making
a psuedo persistent change that would be lost after libvirtd restart
(I didn't know any better).
Fix these APIs to rightly reject non running domains.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The plain QEMU tree does not include 'thread_id' in the JSON
output. Thus we need to treat it as non-fatal if missing.
* src/qemu/qemu_monitor_json.c: Treat missing thread_id as non-fatal
A typo in the check for the primary IDE controller could cause
a crash on restore depending on the exact guest config.
* src/qemu/qemu_conf.c: Fix s/video/controller/ typo & slot
number typo
Current error reporting for JSON mode returns the full JSON
command string and full JSON error string. This is not very
user friendly, so this change makes the error report only
contain the basic command name, and friendly error message
description string. The full JSON data is logged instead.
* src/qemu/qemu_monitor_json.c: Always return the 'desc' field from
the JSON error message to users.
When in JSON mode, QEMU requires that 'qmp_capabilities' is run as
the first command in the monitor. This is a no-op when run in the
text mode monitor
* src/qemu/qemu_driver.c: Run capabilities negotiation when
connecting to the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
support for the 'qmp_capabilities' command, no-op in text mode.
This part adds support for qemu making a macvtap tap device available
via file descriptor passed to qemu command line. This also attempts to
tear down the macvtap device when a VM terminates. This includes support
for attachment and detachment to/from running VM.
* src/qemu/qemu_conf.[ch] src/qemu/qemu_driver.c: add support in the
QEmu driver
Current PCI addresses are allocated at time of VM startup.
To make them truely persistent, it is neccessary to do this
at time of virDomainDefine/virDomainCreate. The code in
qemuStartVMDaemon still remains in order to cope with upgrades
from older libvirt releases
* src/qemu/qemu_driver.c: Rename existing qemuAssignPCIAddresses
to qemuDetectPCIAddresses. Add new qemuAssignPCIAddresses which
does auto-allocation upfront. Call qemuAssignPCIAddresses from
qemuDomainDefine and qemuDomainCreate to assign PCI addresses that
can then be persisted. Don't clear PCI addresses at shutdown if
they are intended to be persistent
The old text mode monitor prompts for a password when disks are
encrypted. This interactive approach doesn't work for JSON mode
monitor. Thus there is a new 'block_passwd' command that can be
used.
* src/qemu/qemu_driver.c: Split out code for looking up a disk
secret from findVolumeQcowPassphrase, into a new method
getVolumeQcowPassphrase. Enhance qemuInitPasswords() to also
set the disk encryption password via the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
support for the 'block_passwd' monitor command.
Since c26cb9234f4b9fa46d7caa3385ae36704167c53f, the dname
parameter has been ignored by these two functions. Use it.
* src/qemu/qemu_driver.c (qemudDomainMigratePrepareTunnel): Honor dname
parameter once again.
(qemudDomainMigratePrepare2): Likewise.
All other libvirt functions use array first and then number of elements
in that array. Let's make cpuDecode follow this rule.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
With QEMU >= 0.12 the host and guest side of disks no longer have
the same naming convention. Specifically the host side will now
get a 'drive-' prefix added to its name. The 'info blockstats'
monitor command returns the host side name, so it is neccessary
to strip this off when looking up stats since libvirt stores the
guest side name !
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Move 'drive-' prefix
string to a defined constant
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Strip
off 'drive-' prefix (if found) when looking up disk stats
Currently the timeout for reading startup output is 3 seconds. If the
host is under any sort of load, we can easily trigger this. Lets bump
it to 30 seconds.
Since the polling loop checks to see if the process has died, we shouldn't
erroneously hit this timeout if qemu bombs (only if it is stuck in some
infinite loop).
Use the ATTRIBUTE_NONNULL annotation to mark some virConnectPtr
args as mandatory non-null so the compiler can warn of mistakes
* src/conf/domain_event.h: All virConnectPtr args must be non-null
* src/qemu/qemu_conf.h: qemudBuildCommandLine and
qemudNetworkIfaceConnect() must be given non-null connection
* tests/qemuxml2argvtest.c: Provide a non-null (dummy) connection to
qemudBuildCommandLine()
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in cpu_conf.{h,c} and update all callers to
match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in node_device_conf.{h,c} and update all callers to
match
All callers now pass a NULL virConnectPtr into the USB/PCi device
iterator functions. Therefore the virConnectPtr arg can now be
removed from these functions
* src/util/hostusb.h, src/util/hostusb.c: Remove virConnectPtr
from usbDeviceFileIterate
* src/util/pci.c, src/util/pci.h: Remove virConnectPtr arg from
pciDeviceFileIterate
* src/qemu/qemu_security_dac.c, src/security/security_selinux.c: Update
to drop redundant virConnectPtr arg
The QEMU flags are commonly stored as a signed or unsigned int,
allowing only 31 flags. This limit is rather close, so to aid
future patches, change it to a 64-bit int
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c:
Use 'unsigned long long' for QEMU flags
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in security_driver.{h,c} and update all callers to
match
The security driver was mistakenly initialized before the QEMU
config file was loaded. This prevents it being turned off again.
The capabilities XML was also getting the wrong security driver
name, due to the stacked driver arrangement.
* src/qemu/qemu_driver.c: Fix initialization order and capabilities
model name
When restoring from a saved guest image, the XML would already
contain the PCI slot ID of the IDE controller & video card.
The attempt to explicitly reserve this upfront would thus fail
everytime.
* src/qemu/qemu_conf.c: Reserve IDE controller / video card
slot at time of need, rather than upfront
If the primary security driver (SELinux/AppArmour) was disabled
then the secondary QEMU DAC security driver was also disabled.
This is mistaken, because the latter must be active at all times
* src/qemu/qemu_driver.c: Ensure DAC driver is always active
To allow devices to be hot(un-)plugged it is neccessary to ensure
they all have a unique device aliases. This fixes the hotplug
methods to assign device aliases before invoking the monitor
commands which need them
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Expose methods
for assigning device aliases for disks, host devices and
controllers
* src/qemu/qemu_driver.c: Assign device aliases when hotplugging
all types of device
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address-device.args:
Update for changed hostdev naming scheme
This patch re-arranges the QEMU device alias assignment code to
make it easier to call into the same codeblock when performing
device hotplug. The new code has the ability to skip over already
assigned names to facilitate hotplug
* src/qemu/qemu_driver.c: Call qemuAssignDeviceNetAlias()
instead of qemuAssignNetNames
* src/qemu/qemu_conf.h: Export qemuAssignDeviceNetAlias()
instead of qemuAssignNetNames
* src/qemu/qemu_driver.c: Merge the legacy disk/network alias
assignment code into the main methods
The current way of assigning names to the host network backend and
NIC device in QEMU was over complicated, by varying naming scheme
based on the NIC model and backend type. This simplifies the naming
to simply be 'net0' and 'hostnet0', allowing code to easily determine
the host network name and vlan based off the primary device alias
name 'net0'. This in turn allows removal of alot of QEMU specific
code from the XML parser, and makes it easier to assign new unique
names for NICs that are hotplugged
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove hostnet_name
and vlan fields from virNetworkDefPtr
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c:
Use a single network alias naming scheme regardless of NIC type
or backend type. Determine VLANs from the alias name.
* tests/qemuxml2argvdata/qemuxml2argv-net-eth-names.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args: Update
for new simpler naming scheme
The QEMU 0.12.x tree has the -netdev command line argument, but not
corresponding monitor command. We can't enable the former, without
the latter since it will break hotplug/unplug.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Disable -netdev usage
until 0.13 at earliest
* tests/qemuxml2argvtest.c: Add test for -netdev syntax
* tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.xml: Test
data files for -netdev syntax
PCI disk, disk controllers, net devices and host devices need to
have PCI addresses assigned before they are hot-plugged
* src/qemu/qemu_conf.c: Add APIs for ensuring a device has an
address and releasing unused addresses
* src/qemu/qemu_driver.c: Ensure all devices have addresses
when hotplugging.
The current QEMU code allocates PCI addresses incrementally starting
at 4. This is not satisfactory because the user may have given some
addresses in their XML config, which need to be skipped over when
allocating addresses to remaining devices.
It is thus neccessary to maintain a list of already allocated PCI
addresses and then only allocate ones that remain unused. This is
also required for domain device hotplug to work properly later.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add APIs for creating
list of existing PCI addresses, and allocating new addresses.
Refactor address assignment to use this code
* src/qemu/qemu_driver.c: Pull PCI address assignment up into the
qemuStartVMDaemon() method, as a prelude to moving it into the
'define' method. Update list of allocated addresses when connecting
to a running VM at daemon startup.
* tests/qemuxml2argvtest.c, tests/qemuargv2xmltest.c,
tests/qemuxml2xmltest.c: Remove USB product test since all
passthrough is done based on address
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args,
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml: Kil
unused data files
Since QEMU startup uses the new -device argument, the hotplug
code needs todo the same. This converts disk, network and
host device hotplug to use the device_add command
* src/qemu/qemu_driver.c: Use new device_add monitor APIs
whereever possible
The way QEMU is started has been changed to use '-device' and
the new style '-drive' syntax. This needs to be mirrored in
the hotplug code, requiring addition of two new APIs.
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Define APIs
qemuMonitorAddDevice() and qemuMonitorAddDrive()
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Implement the new monitor APIs
