Remove the target table before renaming a table to it, i.e.,
remove table B before renaming A to B. This makes the
renaming more robust against unconnected left-over tables.
Both LVM volumes and SCSI LUNs have a globally unique
identifier associated with them. It is useful to be able
to query this identifier to then perform disk locking,
rather than try to figure out a stable pathname.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When entering "confirm" phase, we are interested in the value of
cancelled rather then ret variable which was interesting before "finish"
phase and didn't change since then.
Previously, qemu did not respond to monitor commands during migration if
the limit was too high. This prevented us from raising the limit
earlier. The qemu issue seems to be fixed (according to my testing) and
we may remove the 32Mb/s limit.
This patch refactors the JSON parsing function that extracts the block
IO tuning parameters from qemu's output. The most impacting change
concerns the error message that is returned if the reply from qemu does
not contain the needed data. The data for IO parameter tuning were added
in qemu 1.1 and the previous error message was confusing.
This patch also breaks long lines and extracts a multiple time used code
pattern to a macro.
Remove spaces before function calls and some other coding nits in some
parts of the remote driver and refactor getting of URI argument
components into variables used by libvirt later on.
Prevents libvirt from treating RBD backing stores as files. Without this
patch, creating a domain with a qcow2 overlay on an RBD would fail.
This patch essentially extends 9c7c4a4fc5,
which allows nbd backing stores, to allow rbd backing stores.
From man poll(2), poll does not set errno=EAGAIN on interrupt, however
it does set errno=EINTR. Have libvirt retry on the appropriate errno.
Under heavy load, a program of mine kept getting libvirt errors 'poll on
socket failed: Interrupted system call'. The signals were SIGCHLD from
processes forked by threads unrelated to those using libvirt.
Rename qemuDefaultScsiControllerModel to qemuCheckScsiControllerModel.
When scsi model is given explicitly in XML(model > 0) checking if the
underlying QEMU supports it or not first, raise an error on checking
failure.
When the model is not given(mode <= 0), return LSI by default, if
the QEMU doesn't support it, raise an error.
QEMU_CAPS_SCSI_LSI
set the flag when "lsi53c895a", bus PCI, alias "lsi" in
the output of "qemu -device ?"
-device lsi in qemu command line
QEMU_CAPS_VIRTIO_SCSI_PCI
set the flag when "name "virtio-scsi-pci", bus PCI" in
the output of qemu devices query.
-device virtio-scsi-pci in qemu command line
This patch is in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=818467
If a caller to virCommandRun doesn't ask for the exitstatus of the
program it's running, the virCommand functions assume that they should
log an error message and return failure if the exit code isn't
0. However, only the commandline and exit status are logged, while
potentially useful information sent by the program to stderr is
discarded.
Fortunately, virCommandRun is already checking if the caller had asked
for stderr to be saved and, if not, sets things up to save it in
*cmd->errbuf. This makes it fairly simple for virCommandWait to
include *cmd->errbuf in the error log (there are still other callers
that don't setup errbuf, and even virCommandRun won't set it up if the
command is being daemonized, so we have to check that it's non-zero).
Switch virDomainObjPtr to use the virObject APIs for reference
counting. The main change is that virObjectUnref does not return
the reference count, merely a bool indicating whether the object
still has any refs left. Checking the return value is also not
mandatory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This converts the following public API datatypes to use the
virObject infrastructure:
virConnectPtr
virDomainPtr
virDomainSnapshotPtr
virInterfacePtr
virNetworkPtr
virNodeDevicePtr
virNWFilterPtr
virSecretPtr
virStreamPtr
virStorageVolPtr
virStoragePoolPtr
The code is significantly simplified, since the mutex in the
virConnectPtr object now only needs to be held when accessing
the per-connection virError object instance. All other operations
are completely lock free.
* src/datatypes.c, src/datatypes.h, src/libvirt.c: Convert
public datatypes to use virObject
* src/conf/domain_event.c, src/phyp/phyp_driver.c,
src/qemu/qemu_command.c, src/qemu/qemu_migration.c,
src/qemu/qemu_process.c, src/storage/storage_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
tests/qemuxml2argvtest.c, tests/qemuxmlnstest.c,
tests/sexpr2xmltest.c, tests/xmconfigtest.c: Convert
to use virObjectUnref/virObjectRef
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This introduces a fairly basic reference counted virObject type
and an associated virClass type, that use atomic operations for
ref counting.
In a global initializer (recommended to be invoked using the
virOnceInit API), a virClass type must be allocated for each
object type. This requires a class name, a "dispose" callback
which will be invoked to free memory associated with the object's
fields, and the size in bytes of the object struct.
eg,
virClassPtr connclass = virClassNew("virConnect",
sizeof(virConnect),
virConnectDispose);
The struct for the object, must include 'virObject' as its
first member
eg
struct _virConnect {
virObject object;
virURIPtr uri;
};
The 'dispose' callback is only responsible for freeing
fields in the object, not the object itself. eg a suitable
impl for the above struct would be
void virConnectDispose(void *obj) {
virConnectPtr conn = obj;
virURIFree(conn->uri);
}
There is no need to reset fields to 'NULL' or '0' in the
dispose callback, since the entire object will be memset
to 0, and the klass pointer & magic integer fields will
be poisoned with 0xDEADBEEF before being free()d
When creating an instance of an object, one needs simply
pass the virClassPtr eg
virConnectPtr conn = virObjectNew(connclass);
if (!conn)
return NULL;
conn->uri = virURIParse("foo:///bar")
Object references can be manipulated with
virObjectRef(conn)
virObjectUnref(conn)
The latter returns a true value, if the object has been
freed (ie its ref count hit zero)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds the support to run the QEMU network helper
under unprivileged user. It also adds the support for
attach-interface option in virsh to run under unprivileged
user.
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant<coreyb@linux.vnet.ibm.com>
This patch adds the capability in libvirt to check if
-netdev bridge option is supported or not.
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant<coreyb@linux.vnet.ibm.com>
All callers used the same initialization seed (well, the new
viratomictest forgot to look at getpid()); so we might as well
make this value automatic. And while it may feel like we are
giving up functionality, I documented how to get it back in the
unlikely case that you actually need to debug with a fixed
pseudo-random sequence. I left that crippled by default, so
that a stray environment variable doesn't cause a lack of
randomness to become a security issue.
* src/util/virrandom.c (virRandomInitialize): Rename...
(virRandomOnceInit): ...and make static, with one-shot call.
Document how to do fixed-seed debugging.
* src/util/virrandom.h (virRandomInitialize): Drop prototype.
* src/libvirt_private.syms (virrandom.h): Don't export it.
* src/libvirt.c (virInitialize): Adjust caller.
* src/lxc/lxc_controller.c (main): Likewise.
* src/security/virt-aa-helper.c (main): Likewise.
* src/util/iohelper.c (main): Likewise.
* tests/seclabeltest.c (main): Likewise.
* tests/testutils.c (virtTestMain): Likewise.
* tests/viratomictest.c (mymain): Likewise.
Commit 1f6f723 missed a step. At first I was worried that scrubbing
the conditionals would lead to a runtime failure when compiled without
avahi, but my testing makes it appear that the runtime error will only
occur if the .conf files in /etc request mdns advertisement; and the
old behavior was to silently ignore the request, so this is actually
a better behavior of only failing when the config requests the
impossible.
* src/rpc/virnetserver.c: Drop HAVE_AVAHI conditionals; all
callers already passed NULL if mdns_adv was not configured.
If there's a memory leak in qemu or qemu is exploited the host's
system will sooner or later start trashing instead of killing
the bad process. This however has impact on performance and other
guests as well. Therefore we should set a reasonable RSS limit
even when user hasn't set any. It's better to be secure by default.
Parsing xen-xm format configuration will fail if UUID is not
specified, e.g.
virsh domxml-from-native xen-xm some-config-without-uuid
error: internal error parsing xm config failed
Initially I thought to skip parsing the UUID in xenParseXM() when
not present in the configuration, but this results in a UUID of
all zeros since it is never set
virsh domxml-from-native xen-xm /tmp/jim/bug-773621_pierre-test
<domain type='xen'>
<name>test</name>
<uuid>00000000-0000-0000-0000-000000000000</uuid>
...
which certainly can't be correct since this is the UUID the xen
tools use for dom0.
This patch takes the approach of generating a UUID when it is not
specified in the configuration.
Commit ba226d334a tried to fix crash of
the daemon when a domain with an open console was destroyed. The fix was
wrong as it tried to remove the callback also when the stream was
aborted, where at that point the fd stream driver was already freed and
removed.
This patch clears the callbacks with a helper right before the hash is
freed, so that it doesn't interfere with other codepaths where the
stream object is freed.
Without this patch, the English phrase 'no name' would appear
literally within the remaining translated message.
* src/parallels/parallels_driver.c (parallelsCreateVm)
(parallelsDomainDefineXML): Tweak error message.
The remote driver did not fill the required snapshot parent argument in
the RPC call structure that caused a client crash when trying to use
this new API.
* src/conf/domain_conf.c:
- Add virDomainControllerFind to find controller device by type
and index.
- Add virDomainControllerRemove to remove the controller device
from maintained controler list.
* src/conf/domain_conf.h:
- Declare the two new helpers.
* src/libvirt_private.syms:
- Expose private symbols for the two new helpers.
* src/qemu/qemu_driver.c:
- Support attach/detach controller device persistently
* src/qemu/qemu_hotplug.c:
- Use the two helpers to simplify the codes.
The access, birth, modification and change times are added to
storage volumes and corresponding xml representations. This
shows up in the XML in this format:
<timestamps>
<atime>1341933637.027319099</atime>
<mtime>1341933637.027319099</mtime>
</timestamps>
Signed-off-by: Eric Blake <eblake@redhat.com>
capability.rng: Guest features can be in any order.
nodedev.rng: Added <driver> element, <capability> phys_function and
virt_functions for PCI devices.
storagepool.rng: Owner or group ID can be -1.
schema tests: New capabilities and nodedev files; changed owner and
group to -1 in pool-dir.xml.
storage_conf: Print uid_t and gid_t as signed to storage pool XML.
The recent changes to the testsuite to validate exported symbols
flushed out a case of unconditionally exporting symbols that
were only conditionally compiled under HAVE_AVAHI.
* src/Makefile.am (libvirt_net_rpc_server_la_SOURCES): Compile
virnetservermdns unconditionally.
* configure.ac (HAVE_AVAHI): Drop unused automake conditional.
* src/rpc/virnetservermdns.c: Add fallbacks when Avahi is not
present.
One of our latest commits fbe87126 introduced this nasty typo:
func(vmdef, ...); where func() dereference vmdef->ncontrollers,
and vmdef was initialized to NULL. This leaves us with unconditional
immediate segfault. It should be vm->def instead.
Security manager is not a dynamically loadable driver. Let's avoid the
confusion by renaming libvirt_driver_security library as
libvirt_security_manager.
Security manager is not a dynamically loadable driver, it's a common
infrastructure similar to util, conf, cpu, etc. used by individual
drivers. Such code is allowed to be linked into libvirt.so.
This reverts commit ec5b7bd2ec and most of
aae5cfb699.
This patch is supposed to fix virdrivermoduletest failures for qemu and
lxc drivers as well as libvirtd's ability to load qemu and lxc drivers.
With 0.10.0-rc0 out the door, we are committed to the next version
number.
* src/libvirt_public.syms (LIBVIRT_0.9.14): Rename...
(LIBVIRT_0.10.0): ...to this.
* docs/formatdomain.html.in: Fix fallout.
* src/openvz/openvz_driver.c (openvzDriver): Likewise.
* src/remote/remote_driver.c (remote_driver): Likewise.
There are a few issues with the current virAtomic APIs
- They require use of a virAtomicInt struct instead of a plain
int type
- Several of the methods do not implement memory barriers
- The methods do not implement compiler re-ordering barriers
- There is no Win32 native impl
The GLib library has a nice LGPLv2+ licensed impl of atomic
ops that works with GCC, Win32, or pthreads.h that addresses
all these problems. The main downside to their code is that
the pthreads impl uses a single global mutex, instead of
a per-variable mutex. Given that it does have a Win32 impl
though, we don't expect anyone to seriously use the pthread.h
impl, so this downside is not significant.
* .gitignore: Ignore test case
* configure.ac: Check for which atomic ops impl to use
* src/Makefile.am: Add viratomic.c
* src/nwfilter/nwfilter_dhcpsnoop.c: Switch to new atomic
ops APIs and plain int datatype
* src/util/viratomic.h: inline impls of all atomic ops
for GCC, Win32 and pthreads
* src/util/viratomic.c: Global pthreads mutex for atomic
ops
* tests/viratomictest.c: Test validate to validate safety
of atomic ops.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove the use of a manually run virLogStartup and
virNodeSuspendInitialize methods. Instead make sure they
are automatically run using VIR_ONCE_GLOBAL_INIT
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch enables the "none" USB controller for qemu guests and adds
valdiation on hot-plugged devices if the guest has USB disabled.
This patch also adds a set of tests to check parsing of domain XMLs that
use the "none" controller and some forbidden situations concerning it.
This patch adds helpers that validate domain's device configuration.
This will be needed later on to verify devices being hot-plugged to
guests. If the guest has no USB bus, then it's not valid to plug a USB
device to that guest.
Libvirt adds a USB controller to the guest even if the user does not
specify any in the XML. This is due to back-compat reasons.
To allow disabling USB for a guest this patch adds a new USB controller
type "none" that disables USB support for the guest.
The option 'srcSpec' to virsh command find-storage-pool-sources
is optional for logical type of storage pool, but mandatory for
netfs and iscsi type.
When missing the option for netfs and iscsi, libvirt reports XML
parsing error due to null string option srcSpec.
before
error: Failed to find any netfs pool sources
error: (storage_source_specification):1: Document is empty
(null)
after:
error: pool type 'iscsi' requires option --srcSpec for source discovery
To create a new VM in Parallels Clud Server we should issue
"prlctl create" command, and give path to the directory,
where VM should be created. VM's storage will be in that
directory later. So in this first version find out location
of first VM's hard disk and create VM there.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Parallels Cloud Server has one serious discrepancy with libvirt:
libvirt stores domain configuration files in one place, and storage
files in other places (with the API of storage pools and storage volumes).
Parallels Cloud Server stores all domain data in a single directory,
for example, you may have domain with name fedora-15, which will be
located in '/var/parallels/fedora-15.pvm', and it's hard disk image will be
in '/var/parallels/fedora-15.pvm/harddisk1.hdd'.
I've decided to create storage driver, which produces pseudo-volumes
(xml files with volume description), and they will be 'converted' to
real disk images after attaching to a VM.
So if someone creates VM with one hard disk using virt-manager,
at first virt-manager creates a new volume, and then defines a
domain. We can lookup a volume by path in XML domain definition
and find out location of new domain and size of its hard disk.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Add parallelsDomainDefineXML function, it works only for existing
domains for the present.
It's too hard to convert libvirt's XML domain configuration into
Parallel's one, so I've decided to compare virDomainDef structures:
current domain definition and the one created from XML, given to
the function. And change only different parameters.
Currently only name, description, number of cpus, memory amount
and video memory can be changed.
Video device and console added, because libvirt supposes that
VM must always have one video device, if there are some
graphics and one console.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Add support of collecting information about serial
ports. This change is needed mostly as an example,
support of other devices will be added later.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Parallels driver is 'stateless', like vmware or openvz drivers.
It collects information about domains during startup using
command-line utility prlctl. VMs in Parallels are identified by UUIDs
or unique names, which can be used as respective fields in
virDomainDef structure. Currently only basic info, like
description, virtual cpus number and memory amount, is implemented.
Querying devices information will be added in the next patches.
Parallels doesn't support non-persistent domains - you can't run
a domain having only disk image, it must always be registered
in system.
Functions for querying domain info have been just copied from
test driver with some changes - they extract needed data from
previously created list of virDomainObj objects.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Add function virCommandNewVAList which is equivalent to the
virCommandNewArgList but with va_list instead of a variable number
of arguments.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Parallels Cloud Server is a cloud-ready virtualization
solution that allows users to simultaneously run multiple virtual
machines and containers on the same physical server.
More information can be found here: http://www.parallels.com/products/pcs/
Also beta version of Parallels Cloud Server can be downloaded there.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
The 'check-symfile' test case was checking the contents of
libvirt.syms against libvirt.so + all of libvirt_driver_XXX.so
This was in fact bogus - libvirt.syms should only refer to
stuff in libvirt.so, but it had some symbols from the various
driver modules in it too. Now that libvirt.syms has been
fixed, the check-symfile test can be simplified to only
consider libvirt.so
The nwfilter and secrets drivers are both stateful and are already
linked directly to libvirtd. Linking them to libvirt.so is thus
wrong, likewise exporting their symbols in libvirt.so is wrong
The network driver is stateful, so it is linked directly to libvirtd,
rather than libvirt.so. Thus there are no network symbols to be exported
in libvirt.so, and libvirt_network.syms can be deleted
Otherwise, a build may fail with:
lxc/lxc_conatiner.c: In function 'lxcContainerDropCapabilities':
lxc/lxc_container.c:1662:46: error: unused parameter 'keepReboot' [-Werror=unused-parameter]
* src/lxc/lxc_container.c (lxcContainerDropCapabilities): Mark
parameter unused.
If an LXC container is using a virtual network and that network
is not active, currently the user gets a rather unhelpful
error message about tap device setup failure. Add an explicit
check for whether the network is active, in exactly the same
way as the QEMU driver
The cfg.mk file rule to check for tab characters was not
applied to perl files. Much of our Perl code is full of
tabs as a result. Kill them, kill them all !
The reboot() syscall is allowed by new kernels for LXC containers.
The LXC controller can detect whether a reboot was requested
(instead of a normal shutdown) by looking at the "init" process
exit status. If a reboot was triggered, the exit status will
record SIGHUP as the kill reason.
The LXC controller has cleared all its capabilities, and the
veth network devices will no longer exist at this time. Thus
it cannot restart the container init process itself. Instead
it emits an event which is picked up by the LXC driver in
libvirtd. This will then re-create the container, using the
same configuration as it was previously running with (ie it
will not activate 'newDef').
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Check whether the reboot() system call is virtualized, and if
it is, then allow the container to keep CAP_SYS_REBOOT.
Based on an original patch by Serge Hallyn
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This defines a new RPC protocol to be used between the LXC
controller and the libvirtd LXC driver. There is only a
single RPC message defined thus far, an asynchronous "EXIT"
event that is emitted just before the LXC controller process
exits. This provides the LXC driver with details about how
the container shutdown - normally, or abnormally (crashed),
thus allowing the driver to emit better libvirt events.
Emitting the event in the LXC controller requires a few
little tricks with the RPC service. Simply calling the
virNetServiceClientSendMessage does not work, since this
merely queues the message for asynchronous processing.
In addition the main event loop is no longer running at
the point the event is emitted, so no I/O is processed.
Thus after invoking virNetServiceClientSendMessage it is
necessary to mark the client as being in "delayed close"
mode. Then the event loop is run again, until the client
completes its close - this happens only after the queued
message has been fully transmitted. The final complexity
is that it is not safe to run virNetServerQuit() from the
client close callback, since that is invoked from a
context where the server is locked. Thus a zero-second
timer is used to trigger shutdown of the event loop,
causing the controller to finally exit.
* src/Makefile.am: Add rules for generating RPC protocol
files and dispatch methods
* src/lxc/lxc_controller.c: Emit an RPC event immediately
before exiting
* src/lxc/lxc_domain.h: Record the shutdown reason
given by the controller
* src/lxc/lxc_monitor.c, src/lxc/lxc_monitor.h: Register
RPC program and event handler. Add callback to let
driver receive EXIT event.
* src/lxc/lxc_process.c: Use monitor exit event to decide
what kind of domain event to emit
* src/lxc/lxc_protocol.x: Define wire protocol for LXC
controller monitor.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the gendispatch.pl script to get a little closer to
being able to generate code for the LXC monitor, by passing
in the struct prefix separately from the procedure prefix.
Also allow method names using virCapitalLetters instead
of vir_underscore_separator
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the code that handles the LXC monitor out of the
lxc_process.c file and into lxc_monitor.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the LXC driver to use the virNetClient APIs for
connecting to the libvirt_lxc monitor, instead of the
low-level socket APIs. This is a step towards running
a full RPC protocol with libvirt_lxc
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rename the lxc_driver_t struct typedef to virLXCDriver to more
closely follow normal libvirt naming conventions
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For consistency all the APIs in the lxc_domain.c file should
have a virLXCDomain prefix in their name
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For consistency all the APIs in the lxc_process.c file should
have a virLXCProcess prefix in their name
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the socket event handler for the RPC client we must deal
with read/write events, before checking for EOF, otherwise
we might close the socket before we've read & acted upon the
last RPC messages
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the remote driver to use the virNetClient close callback
to trigger the virConnectPtr close callbacks
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Allow detection of socket close in virNetClient via a callback
function, triggered on any condition that causes the socket to
be closed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently if the keepalive timer triggers, the 'markClose'
flag is set on the virNetClient. A controlled shutdown will
then be performed. If an I/O error occurs during read or
write of the connection an error is raised back to the
caller, but the connection isn't marked for close. This
patch ensures that all I/O error scenarios always result
in the connection being marked for close.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Define new virConnect{Register,Unregister}CloseCallback() public APIs
which allows registering/unregistering a callback to be invoked when
the connection to a hypervisor is closed. The callback is provided
with the reason for the close, which may be 'error', 'eof', 'client'
or 'keepalive'.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If a domain is explicitly configured with <seclabel type="none"/> we
correctly ensure that no labeling will be done by setting
norelabel=true. However, if no seclabel element is present in domain XML
and hypervisor is configured not to confine domains by default, we only
set type to "none" without turning off relabeling. Thus if such a domain
is being started, security driver wants to relabel resources with
default label, which doesn't make any sense.
Moreover, with SELinux security driver, the generated image label lacks
"s0" sensitivity, which causes setfilecon() fail with EINVAL in
enforcing mode.
This is a follow up patch of commit f9ce7dad6, it modifies all
the files which declare the copyright like "See COPYING.LIB for
the License of this software" to use the detailed/consistent one.
And deserts the outdated comments like:
* libvirt-qemu.h:
* Summary: qemu specific interfaces
* Description: Provides the interfaces of the libvirt library to handle
* qemu specific methods
*
* Copy: Copyright (C) 2010, 2012 Red Hat, Inc.
Uses the more compact style like:
* libvirt-qemu.h: Interfaces specific for QEMU/KVM driver
*
* Copyright (C) 2010, 2012 Red Hat, Inc.
During refactoring of code, it has proved common to forget to
remove old symbols from the .syms file. While the Win32 linker
will complain about this, the Linux ELF linker does not. The
new test case validates that every symbol listed in the .syms
file actually exists in the built ELF libraries.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virNWFilterGetIpAddrForIfname and virNWFilterDelIpAddrForIfname
do not exist, so remove them from libvirt_nwfilter.syms
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Any time we have a string with no % passed through gettext, a
translator can inject a % to cause a stack overread. When there
is nothing to format, it's easier to ask for a string that cannot
be used as a formatter, by using a trivial "%s" format instead.
In the past, we have used --disable-nls to catch some of the
offenders, but that doesn't get run very often, and many more
uses have crept in. Syntax check to the rescue!
The syntax check can catch uses such as
virReportError(code,
_("split "
"string"));
by using a sed script to fold context lines into one pattern
space before checking for a string without %.
This patch is just mechanical insertion of %s; there are probably
several messages touched by this patch where we would be better
off giving the user more information than a fixed string.
* cfg.mk (sc_prohibit_diagnostic_without_format): New rule.
* src/datatypes.c (virUnrefConnect, virGetDomain)
(virUnrefDomain, virGetNetwork, virUnrefNetwork, virGetInterface)
(virUnrefInterface, virGetStoragePool, virUnrefStoragePool)
(virGetStorageVol, virUnrefStorageVol, virGetNodeDevice)
(virGetSecret, virUnrefSecret, virGetNWFilter, virUnrefNWFilter)
(virGetDomainSnapshot, virUnrefDomainSnapshot): Add %s wrapper.
* src/lxc/lxc_driver.c (lxcDomainSetBlkioParameters)
(lxcDomainGetBlkioParameters): Likewise.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML)
(virDomainDiskDefParseXML, virDomainGraphicsDefParseXML):
Likewise.
* src/conf/network_conf.c (virNetworkDNSHostsDefParseXML)
(virNetworkDefParseXML): Likewise.
* src/conf/nwfilter_conf.c (virNWFilterIsValidChainName):
Likewise.
* src/conf/nwfilter_params.c (virNWFilterVarValueCreateSimple)
(virNWFilterVarAccessParse): Likewise.
* src/libvirt.c (virDomainSave, virDomainSaveFlags)
(virDomainRestore, virDomainRestoreFlags)
(virDomainSaveImageGetXMLDesc, virDomainSaveImageDefineXML)
(virDomainCoreDump, virDomainGetXMLDesc)
(virDomainMigrateVersion1, virDomainMigrateVersion2)
(virDomainMigrateVersion3, virDomainMigrate, virDomainMigrate2)
(virStreamSendAll, virStreamRecvAll)
(virDomainSnapshotGetXMLDesc): Likewise.
* src/nwfilter/nwfilter_dhcpsnoop.c (virNWFilterSnoopReqLeaseDel)
(virNWFilterDHCPSnoopReq): Likewise.
* src/openvz/openvz_driver.c (openvzUpdateDevice): Likewise.
* src/openvz/openvz_util.c (openvzKBPerPages): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupCgroup): Likewise.
* src/qemu/qemu_command.c (qemuBuildHubDevStr, qemuBuildChrChardevStr)
(qemuBuildCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/rpc/virnetsaslcontext.c (virNetSASLSessionGetIdentity):
Likewise.
* src/rpc/virnetsocket.c (virNetSocketNewConnectUNIX)
(virNetSocketSendFD, virNetSocketRecvFD): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskBuildPool): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemProbe)
(virStorageBackendFileSystemBuild): Likewise.
* src/storage/storage_backend_rbd.c
(virStorageBackendRBDOpenRADOSConn): Likewise.
* src/storage/storage_driver.c (storageVolumeResize): Likewise.
* src/test/test_driver.c (testInterfaceChangeBegin)
(testInterfaceChangeCommit, testInterfaceChangeRollback):
Likewise.
* src/vbox/vbox_tmpl.c (vboxListAllDomains): Likewise.
* src/xenxs/xen_sxpr.c (xenFormatSxprDisk, xenFormatSxpr):
Likewise.
* src/xenxs/xen_xm.c (xenXMConfigGetUUID, xenFormatXMDisk)
(xenFormatXM): Likewise.
Change the permissible minimum value of nodesuspend duration time
to 60 seconds. If option is less than the value, reports error.
Update virsh help and manpage the infomation.
No check for conn->uri being NULL in virAuthGetConfigFilePath (valid
state) made the client segfault. This happens for example with these
settings:
- no virtualbox driver installed (modifies conn->uri)
- no default URI set (VIRSH_DEFAULT_CONNECT_URI="",
LIBVIRT_DEFAULT_URI="", uri_default="")
- auth_sock_rw="sasl"
- virsh run as root
That are unfortunately the settings with fresh Fedora 17 installation
with VDSM.
The check ought to be enough as conn->uri being NULL is valid in later
code and is handled properly.
If from a clean GIT checkout 'make -j 8' is run, the ESX
and Hyper-V code will be generated multiple times over.
This is because there are multiple files being generated
from one invocation of the generator script. make does not
realize this and so invokes the generator once per file.
This doesn't matter with serialized builds, but with
parallel builds multiple instances of the generator get
run at once.
make[2]: Entering directory `/home/berrange/src/virt/libvirt/src'
GEN util/virkeymaps.h
GEN remote/remote_protocol.h
GEN remote/remote_client_bodies.h
GEN remote/qemu_protocol.h
GEN remote/qemu_client_bodies.h
GEN esx/esx_vi_methods.generated.c
GEN esx/esx_vi_methods.generated.h
GEN esx/esx_vi_methods.generated.macro
GEN esx/esx_vi_types.generated.c
GEN esx/esx_vi_types.generated.h
GEN esx/esx_vi_types.generated.typedef
GEN esx/esx_vi_types.generated.typedef
GEN esx/esx_vi_types.generated.typeenum
GEN esx/esx_vi_types.generated.typetostring
GEN esx/esx_vi_types.generated.typefromstring
GEN esx/esx_vi_types.generated.h
GEN esx/esx_vi_types.generated.c
GEN esx/esx_vi_methods.generated.h
GEN esx/esx_vi_methods.generated.c
GEN esx/esx_vi_methods.generated.macro
GEN esx/esx_vi.generated.h
GEN esx/esx_vi.generated.c
GEN esx/esx_vi_types.generated.typeenum
GEN esx/esx_vi_types.generated.typedef
GEN esx/esx_vi_types.generated.typeenum
GEN esx/esx_vi_types.generated.typetostring
GEN esx/esx_vi_types.generated.typefromstring
GEN esx/esx_vi_types.generated.h
GEN esx/esx_vi_types.generated.c
GEN esx/esx_vi_methods.generated.h
...snip...
GEN hyperv/hyperv_wmi.generated.h
GEN libvirt_qemu_probes.h
GEN locking/qemu-sanlock.conf
GEN hyperv/hyperv_wmi.generated.c
GEN rpc/virnetprotocol.h
GEN hyperv/hyperv_wmi_classes.generated.typedef
GEN hyperv/hyperv_wmi_classes.generated.h
GEN hyperv/hyperv_wmi_classes.generated.c
GEN rpc/virkeepaliveprotocol.h
GEN remote/remote_protocol.c
GEN remote/qemu_protocol.c
GEN rpc/virkeepaliveprotocol.c
GEN rpc/virnetprotocol.c
GEN libvirt.def
Prevent this using a timestamp file to control generation,
as was previously done for the python bindings in commit
a7868e0131
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
Fix addresses two issues:
1. Fix generator code to allow deep copy operation for objects with
Dynamic_Cast capabilities.
2. Add missing deep copy routine to Long datatype.
Signed-off-by: Ata E Husain Bohra <ata.husain@hotmail.com>
to query a guests's hostname. Containers like LXC and OpenVZ allow to
set a hostname different from the hosts name and QEMU's guest agent
could provide similar functionality.
When reporting a system error (VIR_ERR_SYSTEM_ERROR) via
virReportSystemError, we should copy the errno value into
the 'int1' field of the virErrorPtr struct. This allows
callers to detect certain errno conditions & discard the
error
* src/util/virterror.c: Place errno value in int1 field
The previous check for YAJL would have many undesirable
consequences, the most important being that it caused the
capabilities XML to lose all <guest> elements. There is
no user visible feedback as to what is wrong in this respect,
merely a syslog message. The empty capabilities causes
libvirtd to then throw away all guest XML configs that are
stored.
This changes the code so that the check for YAJL is only
performed at the time we attempt to spawn a QEMU process
error: Failed to start domain vm-vnc
error: unsupported configuration: this qemu binary requires libvirt to be compiled with yajl
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of using an O(n) efficiency linked list for storing
MCS labels, use a hash table. Instead of having the list
be global, put it in the SELinux driver private data struct
to ensure uniqueness across different instances of the driver.
This also ensures thread safety when multiple hypervisor
drivers are used in the same libvirtd process
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When adding MCS labels, OOM was not being handled correctly.
In addition when reserving an existing label, no check was
made to see if it was already reserved
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The function names in the SELinux driver all start with
SELinux or 'mcs' as a prefix. Sanitize this so that they
all use 'virSecuritySELinux' as the prefix
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Running libvirtd unprivileged results in a warning message from
the NWFilter driver
virNWFilterSnoopLeaseFileRefresh:1882 : open("/var/run/libvirt/network/nwfilter.ltmp"): No such file or directory
Since it requires privileged network access, this driver should
not even run when unprivileged.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the legacy Xen drivers to use virReportError instead of
the statsError, virXenInotifyError, virXenStoreError,
virXendError, xenUnifiedError, xenXMError custom macros
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The xenHypervisorInit method was called from two different
locations, during initial driver registration and also while
opening a Xen connection. The former can't report any useful
errors to the end user/app, so remove it. To ensure thread
safety use a VIR_ONCE_GLOBAL_INIT call to invoke
xenHypervisorInit from the xenHypervisorOpen method.
As per the comment, the Xen hypervisor driver is considered to
be mandatory when running privileged. When it fails to open,
we should thus return an error, not ignore it.
ensures that initialization will always take place when it is
needed, and guarantees it only occurs once. The problem is that
the code to setup a global initializer with proper error
propagation is tedious. This introduces VIR_ONCE_GLOBAL_INIT
macro to simplify this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the libvirtd dispatch code to use virReportError
instead of the virNetError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the nodeinfo helper code to use virReportError instead
of the nodeReportError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the security drivers to use virReportError instead of
the virSecurityReportError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the Power-Hypervisor driver to use virReportError
instead of the PHYP_ERROR custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the ESX driver to use virReportError instead of
the ESX_ERROR & ESX_VI_ERROR custom macros
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'lxc_driver' global variable is now used from several of
the LXC sources files. Thus it needs to be non-static to
avoid runtime linkage errors
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
The Xen driver had a number of error reports which passed a
constant string without format specifiers and was missing
"%s". Furthermore the errors were related to failing system
calls, but virReportSystemError was not used. So the only
useful piece of info (the errno) was being discarded
Move all the code that manages stop/start of LXC processes
into separate lxc_process.{c,h} file to make the lxc_driver.c
file smaller
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the cgroup setup code out of the lxc_controller.c file
and into lxc_cgroup.{c,h}. This reduces the size of the
lxc_controller.c file and paves the way to invoke cgroup
setup from lxc_driver.c instead of lxc_controller.c in the
future
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the LXC driver code related to the virDomainObjPtr
private data into separate lxc_domain.{c,h} files
to reduce the size of lxc_driver.c
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make sure that libvirt_private.syms has all the internal symbols
from APIs in src/rpc/*.h and src/util/cgroup.h, since the LXC
controller/driver will shortly need them
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow virNetServerRun/virNetServerQuit to be invoked multiple
times, we must reset the 'quit' flag in virNetServerRun
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
