Older automake 1.9.6 (hello there, RHEL 5) did not populate
$(builddir), which meant 'make check' failed with:
make[3]: *** No rule to make target `/.libs/libvirt.la', needed by `check-symfile'. Stop.
For that matter, even newer automake doesn't directly emit rules
to build .libs/libvirt.la; we are better off basing our rules
on the public ./libvirt.la.
* src/Makefile.am (check-symfile): Delete useless variable.
Without this patch, RHEL 5 fails to compile, since the dbus
files lives under /usr/include/dbus-1.0/dbus/dbus.h, and
DBUS_CFLAGS contains -I/usr/include/dbus-1.0.
In file included from network/bridge_driver.c:67:
../src/util/virdbus.h:26:25: error: dbus/dbus.h: No such file or directory
* src/Makefile.am (libvirt_driver_network_impl_la_CFLAGS): Add
DBUS_CFLAGS.
When gcc atomic intrinsics are not available (such as on RHEL 5
with gcc 4.1.2), we were getting link errors due to multiple
definitions:
./.libs/libvirt_util.a(libvirt_util_la-virobject.o): In function `virAtomicIntXor':
/home/dummy/l,ibvirt/src/util/viratomoic.h:404: multiple definition of `virAtomicIntXor'
./.libs/libvirt_util.a(libvirt_util_la-viratomic.o):/home/dummy/libvirt/src/util/viratomic.h:404: first defined here
Solve this by conditionally marking the functions static (the
condition avoids falling foul of gcc warnings about unused
static function declarations).
* src/util/viratomic.h: When not using gcc intrinsics, use static
functions to avoid linker errors on duplicate functions.
Building on RHEL 5 warned:
nodeinfo.c: 305: warning: implicit declaration of function 'CPU_COUNT'
This extension macro in <sched.h> was not added until later glibc.
* src/nodeinfo.c (CPU_COUNT): Add fallback implementation.
We already skip out on building the LXC under RHEL 5, because the
kernel is too old (commits 4c18acf, 2dee896); but commit 9612e4b
moved some LXC-only code into common files, resulting in this
build failure:
util/virfile.c: In function 'virFileLoopDeviceAssociate':
util/virfile.c:580: error: 'LO_FLAGS_AUTOCLEAR' undeclared (first use in this function)
Unfortunately, the kernel folks only made it an enum, rather than
also a #define, so we have to modify configure.ac to record when
it is usable.
* configure.ac (with_lxc): Mark when LO_FLAGS_AUTOCLEAR was found.
* src/util/virfile.c (virFileLoopDeviceAssociate): Avoid
compilation when kernel is too old.
Fix possible double close in the child process after the fork in case
infd and outfd are equal, just like they are after being called from
virNetSocketNewConnectCommand.
* configure.ac, spec file: firewalld defaults to enabled if dbus is
available, otherwise is disabled. If --with_firewalld is explicitly
requested and dbus is not available, configure will fail.
* bridge_driver: add dbus filters to get the FirewallD1.Reloaded
signal and DBus.NameOwnerChanged on org.fedoraproject.FirewallD1.
When these are encountered, reload all the iptables reuls of all
libvirt's virtual networks (similar to what happens when libvirtd is
restarted).
* iptables, ebtables: use firewall-cmd's direct passthrough interface
when available, otherwise use iptables and ebtables commands. This
decision is made once the first time libvirt calls
iptables/ebtables, and that decision is maintained for the life of
libvirtd.
* Note that the nwfilter part of this patch was separated out into
another patch by Stefan in V2, so that needs to be revised and
re-reviewed as well.
================
All the configure.ac and specfile changes are unchanged from Thomas'
V3.
V3 re-ran "firewall-cmd --state" every time a new rule was added,
which was extremely inefficient. V4 uses VIR_ONCE_GLOBAL_INIT to set
up a one-time initialization function.
The VIR_ONCE_GLOBAL_INIT(x) macro references a static function called
vir(Ip|Eb)OnceInit(), which will then be called the first time that
the static function vir(Ip|Eb)TablesInitialize() is called (that
function is defined for you by the macro). This is
thread-safe, so there is no chance of any race.
IMPORTANT NOTE: I've left the VIR_DEBUG messages in these two init
functions (one for iptables, on for ebtables) as VIR_WARN so that I
don't have to turn on all the other debug message just to see
these. Even if this patch doesn't need any other modification, those
messages need to be changed to VIR_DEBUG before pushing.
This one-time initialization works well. However, I've encountered
problems with testing:
1) Whenever I have enabled the firewalld service, *all* attempts to
call firewall-cmd from within libvirtd end with firewall-cmd hanging
internally somewhere. This is *not* the case if firewall-cmd returns
non-0 in response to "firewall-cmd --state" (i.e. *that* command runs
and returns to libvirt successfully.)
2) If I start libvirtd while firewalld is stopped, then start
firewalld later, this triggers libvirtd to reload its iptables rules,
however it also spits out a *ton* of complaints about deletion failing
(I suppose because firewalld has nuked all of libvirt's rules). I
guess we need to suppress those messages (which is a more annoying
problem to fix than you might think, but that's another story).
3) I noticed a few times during this long line of errors that
firewalld made a complaint about "Resource Temporarily
unavailable. Having libvirtd access iptables commands directly at the
same time as firewalld is doing so is apparently problematic.
4) In general, I'm concerned about the "set it once and never change
it" method - if firewalld is disabled at libvirtd startup, causing
libvirtd to always use iptables/ebtables directly, this won't cause
*terrible* problems, but if libvirtd decides to use firewall-cmd and
firewalld is later disabled, libvirtd will not be able to recover.
Generating "Unable to add lockspace /lock/space/dir/__LIBVIRT__DISKS__:
No such file or directory" is correct but not exactly clear. This patch
changes the error message to "Unable to create lockspace
/lock/space/dir/__LIBVIRT__DISKS__: parent directory does not exist or
is not a directory".
When running libvirtd from a build directory, libvirtd would load lock
drivers from system directory unless explicitly overridden by setting
LIBVIRT_LOCK_MANAGER_PLUGIN_DIR environment variable. Since we already
autodetect driver directory if libvirt is build with driver modules, we
can use the same trick to automagically set lock driver directory.
Commit 1d22ba95 was complete at the time, but we have since
reintroduced a warning that is fixed in the same manner:
CCLD storagebackendsheepdogtest
*** Warning: Linking the executable storagebackendsheepdogtest against the loadable module
*** libvirt_driver_storage.so is not portable!
* src/Makefile.am (libvirt_driver_storage.la): Factor into new
convenience library libvirt_driver_storage_impl.la.
* tests/Makefile.am (storagebackendsheepdogtest_LDADD): Link to
convenience library, not shared library.
Our existing STRNEQ_NULLABLE() triggered a warning in gcc 4.7 when
used with a literal NULL argument:
qemumonitorjsontest.c: In function 'testQemuMonitorJSONGetMachines':
qemumonitorjsontest.c:289:5: error: null argument where non-null required (argument 1) [-Werror=nonnull]
even though the strcmp is provably dead when a null argument is
present. Squelch the warning by refactoring things so that gcc
never sees strcmp() called with NULL arguments (we still compare
NULL as not equal to "", this rewrite merely aids gcc).
Next, gcc has a valid warning about a literal NULLSTR(NULL):
qemumonitorjsontest.c:289:5: error: invalid application of 'sizeof' to a void type [-Werror=pointer-arith]
Of course, you'd never write NULLSTR(NULL) directly, but it is
handy to use through macros. But the entire part about verify_true()
is unnecessary - gcc already warns about type mismatch with ?:,
without needing to make it more complex.
* src/internal.h (STREQ_NULLABLE, STRNEQ_NULLABLE): Avoid gcc 4.7
stupidity.
(NULLSTR): Simplify, to allow passing compile-time constants.
The DAC security driver uses the virStrToLong_ui function to
parse the uid/gid out of the seclabel string. This works on
Linux where 'uid_t' is an unsigned int, but on Mingw32 it is
just an 'int'. This causes compiler warnings about signed/
unsigned int pointer mis-match.
To avoid this, use explicit 'unsigned int ouruid' local
vars to pass into virStrToLong_ui, and then simply assign
to the 'uid_t' type after parsing
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds URI options to support libssh2 transport in the remote
driver.
A new transport sceme is introduced eg. "qemu+libssh2://..." that
utilizes the libssh2 code added in previous patches.
The libssh2 code requires the authentication callback to be able to
perform keyboard-interactive authentication or to ask t passprhases or
add host keys to known hosts database.
Added URI components:
- known_hosts - path to a knownHosts file in OpenSSH format to check
for known ssh host keys
- known_hosts_verify - how to deal with server key verification:
* "normal" (default) - ask to add new keys
* "auto" - automaticaly add new keys
* "ignore" - don't validate host keys
- sshauth - authentication methods to use. Default is
"agent,privkey,keyboard-interactive". It's a comma separated
string of methods to try while authenticating. The order is
preserved. Some of the methods may require additional
parameters.
Locations of the known_hosts file and private keys are set to default
values if they're present. (~/.ssh/known_hosts, ~/.ssh/id_rsa,
~/.ssh/id_dsa)
This patch adds a glue layer to enable using libssh2 code with the
network client code.
As in the original client implementation, shell code is sent to the
server to detect correct options for netcat and connect to libvirt's
unix socket.
This patch enables virNetSocket to be used as an ssh client when
properly configured.
This patch adds function virNetSocketNewConnectLibSSH2() that takes all
needed parameters and creates a libssh2 session and performs steps
needed to open the connection and then create a virNetSocket that
seamlesly encapsulates the communication.
This patch adds helper functions that enable us to use libssh2 in
conjunction with libvirt's virNetSockets for ssh transport instead of
spawning "ssh" client process.
This implemetation supports tunneled plaintext, keyboard-interactive,
private key, ssh agent based and null authentication. Libvirt's Auth
callback is used for interaction with the user. (Keyboard interactive
authentication, adding of host keys, private key passphrases). This
enables seamless integration into the application using libvirt. No
helpers as "ssh-askpass" are needed.
Reading and writing of OpenSSH style "known_hosts" files is supported.
Communication is done using SSH exec channel, where the user may specify
arbitrary command to be executed on the remote side and reads and writes
to/from stdin/out are sent through the ssh channel. Usage of stderr is
not (yet) supported.
This test case validates the correct generation of SELinux labels
for VMs, wrt the current process label. Since we can't actually
change the label of the test program process, we create a shared
library libsecurityselinuxhelper.so which overrides the getcon()
and setcon() libselinux.so functions. When started the test case
will check to see if LD_PRELOAD is set, and if not, it will
re-exec() itself setting LD_PRELOAD=libsecurityselinuxhelper.so
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the dynamic label generation code will create labels
with a sensitivity of s0, and a category pair in the range
0-1023. This is fine when running a standard MCS policy because
libvirtd will run with a label
system_u:system_r:virtd_t:s0-s0:c0.c1023
With custom policies though, it is possible for libvirtd to have
a different sensitivity, or category range. For example
system_u:system_r:virtd_t:s2-s3:c512.c1023
In this case we must assign the VM a sensitivity matching the
current lower sensitivity value, and categories in the range
512-1023
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code to refactor sec label handling accidentally changed the
SELinux driver to use the 'domain_context' when generating the
image label instead of the 'file_context'
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
After the cleanup of remote display port allocation, I noticed some
messages that didn't make a lot of sense the way they were written. So
I rephrased them.
The defines QEMU_REMOTE_PORT_MIN and QEMU_REMOTE_PORT_MAX were used to
find free port when starting domains. As this was hard-coded to the
same ports as default VNC servers, there were races with these other
programs. This patch includes the possibility to change the default
starting port as well as the maximum port (mostly for completeness) in
qemu config file.
Support for two new config options in qemu.conf is added:
- remote_port_min (defaults to QEMU_REMOTE_PORT_MIN and
must be >= than this value)
- remote_port_max (defaults to QEMU_REMOTE_PORT_MAX and
must be <= than this value)
Port allocations for SPICE and VNC behave almost the same (with
default ports), but there is some mess in the code. This patch clears
these inconsistencies and makes sure the same behavior will be used
when ports for remote displays are changed.
Changes:
- hard-coded number 5900 removed (handled elsewhere like with VNC)
- reservedVNCPorts renamed to reservedRemotePorts (it's not just for
VNC anymore)
- QEMU_VNC_PORT_{MIN,MAX} renamed to QEMU_REMOTE_PORT_{MIN,MAX}
- port allocation unified for VNC and SPICE
Commit 350583c8 broke development on a RHEL 5 box, where the
ancient Autoconf 2.59 lacks AS_VERSION_STRING. Rather than
backport the complex awk script that newer autoconf uses for
true strverscmp comparisons from the shell, it was easier to
just open-code a shell case statement.
* configure.ac (qemu_version): Open-code a replacement for
AS_VERSION_CHECK.
Last of the file splits.
* tools/virsh-volume.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-volume.c: Likewise.
(vshCommandOptVolBy): Fix flag usage.
Almost done with the splits.
* tools/virsh-snapshot.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-snapshot.c: Likewise.
One of the simpler splits.
* tools/virsh-secret.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-secret.c: Likewise.
More in a series of file splits.
* tools/virsh-pool.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-pool.c: Likewise.
(virCommandOptPoolBy): Fix flag usage.
Yet another split file.
* tools/virsh-nwfilter.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-nwfilter.c: Likewise.
Another worthwhile split, needed one more public function.
* tools/virsh-nodedev.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh-nodedev.c: Use new header.
* tools/virsh.c: Likewise.
(vshTreePrint): Export.
* tools/virsh.h (vshTreePrint): Declare.
Another relatively easy file split.
* tools/virsh-network.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-network.c: Likewise.
(vshCommandOptNetworkBy): Update signature.
Another relatively easy split, since helper functions were fixed
in the previous patch.
* tools/virsh-interface.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-interface.c: Likewise.
(vshCommandOptInterfaceBy): Check flags.
In preparation for splitting virsh-interface.c, I found these
functions need to be declared in virsh.h, as well as one that
belongs more properly in virsh-domain.h. Also, since we
use the VSH_BY* flags in more than one function, I improved
how they are used.
* tools/virsh.h (vshNameSorter, vshCmdHasOption): Declare.
(VSH_BYID): Turn into enum.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.h): ...here.
* tools/virsh.c: (vshNameSorter): Export.
(cmd_has_option): Rename...
(vshCmdHasOption): ...and export.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.c (vshCommandOptDomainBy): ...here, adjust
signature, and check flags.
* tools/virsh-network.c (vshCommandOptNetworkBy): Update callers.
* tools/virsh-nwfilter.c (vshCommandOptNWFilterBy): Likewise.
* tools/virsh-secret.c (vshCommandOptSecret): Likewise.
* tools/virsh-domain-monitor.c (includes): Likewise.
* tools/virsh-host.c (includes): Likewise.
The splits are getting easier, with fewer cleanups needed in virsh.h.
* tools/virsh-host.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh-host.c: Use new header.
* tools/virsh.c: Likewise.
Another file worth compiling on its own instead of by .c inclusion.
* tools/virsh-domain-monitor.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.h (vshGetDomainDescription): Move to correct
header.
* tools/virsh-domain-monitor.c: Use new header.
* tools/virsh.c: Likewise.
* tools/virsh-domain.c: Likewise.
This patch updates libvirt's API to allow applications to inspect the
full list of security labels of a domain.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
This patch updates the key "security_driver" in QEMU config to suport
both a sigle default driver or a list of default drivers. This ensures
that it will remain compatible with older versions of the config file.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
These changes make the security drivers able to find and handle the
correct security label information when more than one label is
available. They also update the DAC driver to be used as an usual
security driver.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
This patch updates the domain and capability XML parser and formatter to
support more than one "seclabel" element for each domain and device. The
RNG schema and the tests related to this are also updated by this patch.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
This patch updates the structures that store information about each
domain and each hypervisor to support multiple security labels and
drivers. It also updates all the remaining code to use the new fields.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
This is a fix for the object label generation. It uses a new flag for
virSecuritySELinuxGenNewContext that specifies whether the context is
for an object. If so the context role remains unchanged.
Without this fix it is not possible to start domains with image file or
block device backed storage when selinux is enabled.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Nothing in the testsuite or examples directory should be translated,
as it is not part of the normally installed binary. We already
meet this rule, but enforcing it will make it easier to remember.
Suggested by Daniel P. Berrange.
* cfg.mk (sc_prohibit_useless_translation): Enhance rule.
In order to support systemd socket based activation, it needs to
be possible to create virNetSocketPtr and virNetServerServicePtr
instance from a pre-opened file descriptor
In preparation for adding further constructors, refactor
the virNetServerClientNew method to move most of the code
into a common virNetServerClientNewInternal helper API.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virNetServerDispatchNewClient both creates the
virNetServerClientPtr instance and registers it with the
virNetServerPtr internal state. Split the client registration
code out into a separate virNetServerAddClient method to
allow future reuse from other contexts
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
