Introduce a helper that fetches the typed parameters from the list while
still preserving ownership of the pointer by the list.
In the future this will be also able to report errors stored in the
list.
Signed-off-by: Peter Krempa <pkrempa@redhat.com
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The struct will be made private in upcoming patches. Construct the list
of block entries into a separate list and append them rather than
remember the index of the count element.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Introduce a helper function to concatenate two virTypedParamLists. This
will allow us to refactor qemuDomainGetStatsBlock to not access the list
directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add an allocator function and refactor all allocations to use it. In
upcoming patches 'struct _virTypedParamList' will be made private.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The header uses both styles randomly, switch it to the contemporary
style.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Don't check the return value of 'virTypedParamListExtend' which will
always be a valid pointer and 'virTypedParameterAssignValue' always
returns 0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There are two callers of virTypedParameterAssignValueVArgs.
- 'virTypedParameterAssignValue' always uses the correct type, thus
doesn't need to be modified. Just use the proper type in the function
declaration
- 'virTypedParameterAssign' can get improper type, but we can move the
validation into it decreasing the scope in which failures need to be
propagated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
All changed lines even fit into 80 columns.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Ensure that all switch statements in this module use the proper type in
switch() statements to ensure complier protections.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
All callers pass 'true'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Update the news file mentioning important changes such as the change of
translatable strings or the fix of inactive snapshots of VMs using uefi.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Repeatedly querying an SR-IOV PCI device's capabilities exposes a
memory leak caused by a failure to free the virPCIVirtualFunction
array within the parent struct's g_autoptr cleanup.
Valgrind output after getting a single interface's XML description
1000 times:
==325982== 256,000 bytes in 1,000 blocks are definitely lost in loss record 2,634 of 2,635
==325982== at 0x4C3C096: realloc (vg_replace_malloc.c:1437)
==325982== by 0x59D952D: g_realloc (in /usr/lib64/libglib-2.0.so.0.5600.4)
==325982== by 0x4EE1F52: virReallocN (viralloc.c:52)
==325982== by 0x4EE1FB7: virExpandN (viralloc.c:78)
==325982== by 0x4EE219A: virInsertElementInternal (viralloc.c:183)
==325982== by 0x4EE23B2: virAppendElement (viralloc.c:288)
==325982== by 0x4F65D85: virPCIGetVirtualFunctionsFull (virpci.c:2389)
==325982== by 0x4F65753: virPCIGetVirtualFunctions (virpci.c:2256)
==325982== by 0x505CB75: virNodeDeviceGetPCISRIOVCaps (node_device_conf.c:2969)
==325982== by 0x505D181: virNodeDeviceGetPCIDynamicCaps (node_device_conf.c:3099)
==325982== by 0x505BC4E: virNodeDeviceUpdateCaps (node_device_conf.c:2677)
==325982== by 0x260FCBB2: nodeDeviceGetXMLDesc (node_device_driver.c:355)
Signed-off-by: Tim Shearer <tshearer@adva.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This fixes cross-building in some scenarios.
Specifically, when building for armv7l on x86_64, has_header()
will see the x86_64 version of the linux/kmv.h header and
consider it to be usable. Later, when an attempt is made to
actually include it, the compiler will quickly realize that
things can't quite work.
The reason why we haven't hit this in our CI is that we only ever
install the foreign version of header files. When building the
Debian package, however, some of the Debian-specific tooling will
bring in the native version of the Linux headers in addition to
the foreign one, causing meson to misreport the header's
availability status.
Checking for actual usability, as opposed to mere presence, of
headers is enough to make things work correctly in all cases.
The meson documentation recommends using has_header() instead of
check_header() whenever possible for performance reasons, but
while testing this change on fairly old and underpowered hardware
I haven't been able to measure any meaningful slowdown.
https://bugs.debian.org/1024504
Suggested-by: Helmut Grohne <helmut@subdivi.de>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This removes minor version number from OpenSUSE LEAP target names
and on CentOS Stream 9 installs flake8 from repositories, instead
of pip.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We no longer link to it from anywhere, and a server-side
redirect has been created to keep existing external links
working.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All the information from java.rst have been transferred
to the subproject's own website.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
After previous cleanups, qemuHostdevPreparePCIDevices() no longer
needs virQEMUCaps. Drop its passing from callers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After previous cleanup, there are some functions that do nothing:
qemuConnectDomainXMLToNativePrepareHostHostdev()
qemuConnectDomainXMLToNativePrepareHost()
qemuProcessPrepareHostHostdev()
qemuProcessPrepareHostHostdevs()
Remove them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When preparing a SCSI <hostdev/> with passthrough of a host SCSI
adapter (i.e. no protocol), a virStorageSource structure is
initialized and stored inside virDomainHostdevDef. But the source
structure is filled in many places, with almost the same code.
Firstly, qemuProcessPrepareHostHostdev() and
qemuConnectDomainXMLToNativePrepareHostHostdev() are the same.
Secondly, qemuDomainPrepareHostdev() allocates the src structure,
only to let qemuProcessPrepareHostHostdev() fill src->path later.
Well, src->path can be filled at the same place where the src
structure is allocated (qemuDomainPrepareHostdev()) which renders
the other two functions needless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There is no way the qemuDomainAttachHostPCIDevice() function can
be called over a hostdev with PCI backend other than VFIO. And
even if it were, then the check is written so poorly that it lets
some types through (e.g. KVM) only to let
qemuBuildPCIHostdevDevProps() called afterwards fail properly.
Drop this check and rely on qemuDomainPrepareHostdevPCI() (and
worst case scenario even qemuBuildPCIHostdevDevProps()) to report
the proper error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We used to support KVM and VFIO style of PCI assignment. The
former was dropped in v5.7.0-rc1~103 and thus we only support
VFIO. All other backends lead to an error (see
qemuBuildPCIHostdevDevProps(), or qemuBuildPCIHostdevDevStr() as
it used to be called in the era of aforementioned commit).
Might as well report the error in prepare phase and save hassle
of proceeding with device preparation (e.g. in case of hotplug
overriding the device's driver, setting seclabels, etc.).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The qemuxml2argvtest does a bit of 'fixups' to parsed
virDomainDef just before generating the cmd line. For instance,
it sets PCI backend for hostdevs (to VFIO). The reason for this
is that we want to make the test host independent and thus
letting the code chose backend at runtime might render different
results on different machines. But this is not necessary, as
virpcimock (that the test uses) already creates a fake, but
stable environment (where /dev/vfio/vfio and IOMMU groups exist),
thus qemuHostdevHostSupportsPassthroughVFIO() returns true,
regardless of the actual host support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
virsh command domxml-to-native failed with below error but start
command succeed for same domain xml.
"internal error: invalid PCI passthrough type 'default'"
If a <hostdev> PCI backend is not set in the XML, the supported
one is then chosen in qemuHostdevPreparePCIDevicesCheckSupport().
But this function is not called anywhere from
qemuConnectDomainXMLToNative(). But qemuDomainPrepareHostdev()
is. And it is also called from domain startup/hotplug code.
Therefore, move the backend setting to the common path and drop
qemuHostdevPreparePCIDevicesCheckSupport().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
So far, qemuDomainPrepareHostdev() is a NOP for anything but a
SCSI hostdev. This will change soon. Therefore, move the SCSI
hostdev preparation into a separate function
(qemuDomainPrepareHostdevSCSI()) and make
qemuDomainPrepareHostdev() call function corresponding to the
hostdev type (or nothing if the type doesn't need any
preparation).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When attaching a hostdev of a SCSI subsys,
qemuDomainPrepareHostdev() is called. This makes sense because
the function prepares just SCSI hostdevs ignoring others. But
this will soon change. Thefore, move the function call out of
qemuDomainAttachHostSCSIDevice() and into
qemuDomainAttachHostDevice().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Treat:
<maxphysaddr mode="emulate"/>
as a request not to take the maximum address size from the host.
This is useful if QEMU changes the default.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In a few places, where a capabilities <hostdev/> is processed, a
wrong union member is access: def->source.subsys.type instead of
def->source.caps.type. Fortunately, both union members have .type
as the very first member so no real harm is done. Nevertheless,
we should access the correct union member.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Usually, we want a function to be as reusable as possible. But in
this specific case, when it's used just once we don't need that.
The lxcCreateHostdevDef() function is meant to create a hostdev.
The first argument selects the hostdev mode (caps/subsys) and the
second argument selects the type of hostdev (NET/STORAGE/MISC).
But because of how the function is written, it's impossible to
create a subsys hostdev as the function sets
hostdev->source.caps.type, regardless of mode. So the @mode
argument can be dropped.
Then, the function is called from one place and one place only.
And in there, VIR_DOMAIN_HOSTDEV_CAPS_TYPE_NET is passed for
@type so we can drop that argument too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently translated at 100.0% (10400 of 10400 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/cs/
Co-authored-by: Pavel Borecki <pavel.borecki@gmail.com>
Signed-off-by: Pavel Borecki <pavel.borecki@gmail.com>
Just like we check the resulting domain XML after ATTACH and
DETACH, we should do the same after UPDATE action. This is as
simple as calling testQemuHotplugCheckResult() and providing
missing XMLs. For those test cases where no change is done, we
can just make the expected XML a symlink to the input XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
This brings us one step closer to the caller of
qemuDomainAttachDeviceLive()
(qemuDomainAttachDeviceLiveAndConfig()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
This is a leftover from v2.0.0-rc1~300. In v1.2.12-rc1~43 we've
introduced a code that explicitly sets vm->def->id to -1 to force
generation of inactive XML. But this was removed in the later
commit, which forgot to remove the restoration of the original
dom ID.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There's a comment in testQemuHotplug() trying to explain why we
need to unlock the monitor object. Well, while it might have been
correct when being introduced, it's no longer factually correct
as just any function (attach/detach/update) might talk to the
monitor and it expects the monitor to be unlocked (as it calls
qemuDomainObjEnterMonitor() + qemuDomainObjExitMonitor()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
After previous cleanups a lot of functions from qemu_hotplug.c
are called only within the file. Make them static and drop their
declarations from the header file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's no reason for qemuhotplugtest to reimplement which device
update function to call (testQemuHotplugUpdate()) when
qemuDomainUpdateDeviceLive() already does that. Thus, drop
testQemuHotplugUpdate() and call qemuDomainUpdateDeviceLive()
directly.
BTW: this also shows why reimplementing
qemuDomainUpdateDeviceLive() is bad idea: The
"disk-cdrom-nochange" test is succeeding only because
testQemuHotplugUpdate() supports graphics and returns an
(expected) error for every other devtype.
NB, there's still missing check that the resulting XML is the
expected one (just like we do for attach and detach), but that's
pre-existing and will be fixed later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There's no reason for qemuhotplugtest to reimplement which device
attach function to call (testQemuHotplugAttach()) when
qemuDomainAttachDeviceLive() already does that. Thus, drop
testQemuHotplugAttach() and call qemuDomainAttachDeviceLive()
directly.
There's one small catch though, qemuDomainAttachDeviceLive() now
calls one monitor command more (to list all aliases). We don't
care really, because we're not testing that. Therefore, just
provide a dummy reply.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The testQemuHotplugDetach() already does call
qemuDomainDetachDeviceLive() but only for some device types. For
the rest it reports an error (but only if running test
verbosely). This makes no sense. Just call
qemuDomainDetachDeviceLive() directly and drop
testQemuHotplugDetach().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There is no good reason for qemuDomainUpdateDeviceLive() to live
in (ever growing) qemu_driver.c while we have qemu_hotplug.c
which already contains the rest of hotplug code. Move the
function to its new home.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There is no good reason for qemuDomainAttachDeviceLive() to live
in (ever growing) qemu_driver.c while we have qemu_hotplug.c
which already contains the rest of hotplug code. Move the
function to its new home.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
