On RHEL 5, compilation fails with:
storage/storage_backend.c: In function 'createRawFile':
storage/storage_backend.c:339: warning: implicit declaration of function 'fallocate'
storage/storage_backend.c:339: warning: nested extern declaration of 'fallocate' [-Wnested-externs]
But:
$ grep HAVE_FALLOCATE config.h
/* #undef HAVE_FALLOCATE */
Huh? It turns out that in kernels that old, fallocate() is not
implemented (config.h is correct), but <linux/fs.h> defines
HAVE_FALLOCATE as an empty witness macro for a completely
different purpose. Since storage_backend.c is including
<linux/fs.h> on RHEL 5, we are hosed by the kernel definition.
Newer kernels no longer pollute the namespace, and it's fairly
easy to convert to an expression that works with both the old
kernel witness and the new-style config.h (undefined or 1).
Problem introduced in commit 532fef3.
* src/storage/storage_backend.c (createRawFile): Avoid namespace
pollution from kernel, by checking HAVE_FALLOCATE for a value.
Signed-off-by: Eric Blake <eblake@redhat.com>
Fixed the safezero call for allocating the rest of the file after cloning
an existing volume; it used to always use a zero offset, causing it to
only allocate the beginning of the file.
Also modified file creation to try to use fallocate(2) to pre-allocate
disk space before copying any data to make sure it fails early on if disk
is full and makes sure we can skip zero blocks when copying file contents.
If fallocate isn't available we will zero out the rest of the file after
cloning and only use sparse cloning if client requested a lower allocation
than the input volume's capacity.
Signed-off-by: Oskari Saarenmaa <os@ohmu.fi>
The VIR_FREE() macro will cast away any const-ness. This masked a
number of places where we passed a 'const char *' string to
VIR_FREE. Fortunately in all of these cases, the variable was not
in fact const data, but a heap allocated string. Fix all the
variable declarations to reflect this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
qemu-img is going to switch the default for QCOW2
to QCOW2v3 (compat=1.1)
Extend the probing for qemu-img command line options to check
if -o compat is supported. If the volume definition specifies
the qcow2 format but no compat level and -o compat is supported,
specify -o compat=0.10 to create a QCOW2v2 image.
https://bugzilla.redhat.com/show_bug.cgi?id=997977
Introduced by commit e0139e3044. virStorageVolDefFree free'ed the
pointers that are still used by the added volume object, this changes
it back to VIR_FREE.
Each of the modules handled reporting error messages from the secret fetching
slightly differently with respect to the error. Provide a similar message
for each error case and provide as much data as possible.
One has to refresh the pool to get the correct pool info after
adding/removing/resizing a volume, this updates the pool metadata
(allocation, available) after those operation are done.
Add a privileged field to storageDriverState
Use the privileged value in order to generate a connection which could
be passed to the various storage backend drivers.
In particular, the iSCSI driver will need a connect in order to perform
pool authentication using the 'chap' secrets and the RBD driver utilizes
the connection during pool refresh for pools using 'ceph' secrets.
For now that connection will be to be to qemu driver until a mechanism
is devised to get a connection to just the secret driver without qemu.
Update virStorageBackendRBDOpenRADOSConn() to use the internal API to the
secret driver in order to get the secret value instead of the external
virSecretGetValue() path. Without the flag VIR_SECRET_GET_VALUE_INTERNAL_CALL
there is no way to get the value of private secret.
This also requires ensuring there is a connection which wasn't true for
for the refreshPool() path calls from storageDriverAutostart() prior to
adding support for the connection to a qemu driver. It seems calls to
virSecretLookupByUUIDString() and virSecretLookupByUsage() from the
refreshPool() path would have failed with no way to find the secret - that is
theoretically speaking since the 'conn' was NULL the failure would have been
"failed to find the secret".
Although the XML for CHAP authentication with plain "password"
was introduced long ago, the function was never implemented. This
patch replaces the login/password mechanism by following the
'ceph' (or RBD) model of using a 'username' with a 'secret' which
has the authentication information.
This patch performs the authentication during startPool() processing
of pools with an authType of VIR_STORAGE_POOL_AUTH_CHAP specified
for iSCSI pools.
There are two types of CHAP configurations supported for iSCSI
authentication:
* Initiator Authentication
Forward, one-way; The initiator is authenticated by the target.
* Target Authentication
Reverse, Bi-directional, mutual, two-way; The target is authenticated
by the initiator; This method also requires Initiator Authentication
This only supports the "Initiator Authentication". (I don't have any
enterprise iSCSI env for testing, only have a iSCSI target setup with
tgtd, which doesn't support "Target Authentication").
"Discovery authentication" is not supported by tgt yet too. So this only
setup the session authentication by executing 3 iscsiadm commands, E.g:
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.authmethod" -v "CHAP" --op update
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.username" -v "Jim" --op update
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.password" -v "Jimsecret" --op update
Not all RBD (Ceph) storage pools have cephx authentication turned on,
so "secret" might not be initialized.
It could also be that the secret couldn't be located.
Only call virSecretFree() if "secret" is initialized earlier.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When using logical pools, we had to trust the target->path provided.
This parameter, however, can be completely ommited and we can use
'/dev/<source.name>' safely and populate it to target.path.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=952973
The switch statement in 'virStorageBackendCreateQemuImgOpts' used the
for loop end condition 'VIR_STORAGE_FILE_FEATURE_LAST' as a possible value,
but since that cannot happen Coverity spits out a DEADCODE message. Adding
the Coverity tag just removes the Coverity message
Don't reuse the return value of virStorageBackendFileSystemIsMounted.
If it's 0, we'd return it even if the mount command failed.
Also, don't report another error if it's -1, since one has already
been reported.
Introduced by 258e06c.
https://bugzilla.redhat.com/show_bug.cgi?id=981251
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit id '53d5967c' introduced the following:
TEST: storagevolxml2argvtest
.............. 14 OK
==25636== 358 (264 direct, 94 indirect) bytes in 1 blocks are definitely lost in loss record 67 of 75
==25636== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==25636== by 0x4C95791: virAlloc (viralloc.c:124)
==25636== by 0x4CA0BB4: virCommandNewArgs (vircommand.c:805)
==25636== by 0x4CA0C88: virCommandNew (vircommand.c:789)
==25636== by 0x408602: virStorageBackendCreateQemuImgCmd (storage_backend.c:849)
==25636== by 0x405427: testCompareXMLToArgvHelper (storagevolxml2argvtest.c:61)
==25636== by 0x4064DF: virtTestRun (testutils.c:158)
==25636== by 0x40516F: mymain (storagevolxml2argvtest.c:195)
==25636== by 0x406B1A: virtTestMain (testutils.c:722)
==25636== by 0x37C1021A04: (below main) (libc-start.c:225)
==25636==
PASS: storagevolxml2argvtest
When creating a virtual FC HBA with virsh/libvirt API, an error message
will be returned: "error: Node device not found",
also the 'nodedev-dumpxml' shows wrong information of wwpn & wwnn
for the new created device.
Signed-off-by: xschen@tnsoft.com.cn
This reverts f90af69 which switched wwpn & wwwn in the wrong place.
https://www.kernel.org/doc/Documentation/scsi/scsi_fc_transport.txt
It's not used anywhere except for the switch in
virStorageBackendCreateQemuImgOpts, where leaving it in causes
a dead code coverity warning and omitting it breaks compilation
because of unhandled enum value.
Introduced by 6298f74.
Add <features> and <compat> elements to volume target XML.
<compat> is a string which for qcow2 represents the QEMU version
it should be compatible with. Valid values are 0.10 and 1.1.
1.1 is implicit if the <features> element is present, otherwise
qemu-img default is used. 0.10 can be specified to explicitly
create older images after the qemu-img default changes.
<features> contains optional features, so far
<lazy_refcounts/> is available, which enables caching of reference
counters, improving performance for snapshots.
iscsiadm now supports specifying hostnames in the portal argument [1]
Instead of resolving the hostname to a single IPv4 address, pass the
hostname to isciadm, allowing IPv6 targets to work.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=624437
Setting of local variables in virStorageBackendCreateQemuImgCmd was
unnecessarily cluttered with ternary operators and repeated testing of
of conditions.
This patch refactors the function to use if statements and improves
error reporting in case inputvol is specified but does not contain
target path. Previously we would complain about "unknown storage vol
type 0" instead of the actual problem.
As the document for "virsh-resize" says:
<...>
Attempts to shrink the volume will fail unless I<--shrink> is present;
</...>
This makes sense as it at least prevent the user shrinking the important
data of volume without a notice.
The document for "vol-resize" says the new capacity will be sparse
unless "--allocate" is specified, however, the "--allocate" flag
is never implemented. This implements the "--allocate" flag for
fs backend's raw type volume, based on posix_fallocate and the
syscall SYS_fallocate.
qemu-img resize will fail with "The new size must be a multiple of 512"
if libvirt doesn't round it first.
This fixes rhbz#951495
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
These all existed before virfile.c was created, and for some reason
weren't moved.
This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.
This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=851411https://bugzilla.redhat.com/show_bug.cgi?id=955500
The first problem was that virFileOpenAs was returning fd (-1) in one
of the error cases rather than ret (-errno), so the caller thought
that the error was EPERM rather than ENOENT.
The second problem was that some log messages in the general purpose
qemuOpenFile() function would always say "Failed to create" even if
the caller hadn't included O_CREAT (i.e. they were trying to open an
existing file).
This fixes virFileOpenAs to jump down to the error return (which
returns ret instead of fd) in the previously mentioned incorrect
failure case of virFileOpenAs(), removes all error logging from
virFileOpenAs() (since the callers report it), and modifies
qemuOpenFile to appropriately use "open" or "create" in its log
messages.
NB: I seriously considered removing logging from all callers of
virFileOpenAs(), but there is at least one case where the caller
doesn't want virFileOpenAs() to log any errors, because it's just
going to try again (qemuOpenFile()). We can't simply make a silent
variation of virFileOpenAs() though, because qemuOpenFile() can't make
the decision about whether or not it wants to retry until after
virFileOpenAs() has already returned an error code.
Likewise, I also considered changing virFileOpenAs() to return -1 with
errno set on return, and may still do that, but only as a separate
patch, as it obscures the intent of this patch too much.
If the volume is of a clustered volume group, and not active, the
related pool APIs fails on opening /dev/vg/lv. If the volume is
suspended, it hangs on open(2) the volume.
Though the best solution is to expose the volume status in volume
XML, and even better to provide API to activate/deactivate the volume,
but it's not the work I want to touch currently. Volume status in
other status is just fine to skip.
About the 5th field of lv_attr (from man lvs[8])
<quote>
5 State: (a)ctive, (s)uspended, (I)nvalid snapshot, invalid
(S)uspended snapshot, snapshot (m)erge failed,suspended
snapshot (M)erge failed, mapped (d)evice present without
tables, mapped device present with (i)nactive table
</quote>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
