Using a custom device tree image may cause unexpected behavior in
architectures that use this approach to detect platform devices. Since
usually the device tree is generated by qemu and thus it's not normally
used let's taint VMs using it to make it obvious as a possible source of
problems.
This patch provides support for the new watchdog model "diag288".
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
This patch provides support for a new watchdog action "inject-nmi" which
allows to define an inject of a non-maskable interrupt into a guest.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
The SCSI Architecture Model defines a logical unit address
as 64-bits in length, so change the field accordingly so
that the entire value could be stored.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
So that they can format private data (e.g., disk private data) stored
elsewhere in the domain object.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Complex jobs, such as migration, need to monitor several events at once,
which is impossible when each of the event uses its own condition
variable. This patch adds a single condition variable to each domain
object. This variable can be used instead of the other event specific
conditions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virDomainObjGetOneDef will help to retrieve the correct definition
pointer from @vm in cases where VIR_DOMAIN_AFFECT_LIVE and
VIR_DOMAIN_AFFECT_CONFIG are mutually exclusive. The function simply
returns the correct pointer. This similarly to virDomainObjGetDefs will
greatly simplify the code.
virDomainLiveConfigHelperMethod that is used for this job now does
modify the flags but still requires the callers to extract the correct
definition objects.
In addition coverity and other static analyzers are usually unhappy as
they don't grasp the fact that @flags are upadted according to the
correct def to be present.
To work this issue around and simplify the calling chain let's add a new
helper that will work only on drivers that always copy the persistent
def to a transient at start of a vm. This will allow to drop a few
arguments. The new function syntax will also fill two definition
pointers rather than modifying the @flags parameter.
While we probably won't see machines with more than 65536 cpus for a
while lets store the cpu count as an integer so that we can avoid quite
a lot of overflow checks in our code.
Store the emulator pinning cpu mask as a pure virBitmap rather than the
virDomainPinDef since it stores only the bitmap and refactor
qemuDomainPinEmulator to do the same operations in a much saner way.
As a side effect virDomainEmulatorPinAdd and virDomainEmulatorPinDel can
be removed since they don't add any value.
https://bugzilla.redhat.com/show_bug.cgi?id=998813
Like usb-serial, the pci-serial device allows a serial device to be
attached to PCI bus. An example XML looks like this:
<serial type='dev'>
<source path='/dev/ttyS2'/>
<target type='pci-serial' port='0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</serial>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Sometimes the only thing we need is the pointer to virDomainDiskDef and
having to call virDomainDiskIndexBy* APIs, storing the disk index, and
looking it up in the disks array is ugly. After this patch, we can just
call virDomainDiskBy* and get the pointer in one step.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=976387
For a domain configured using the host cdrom, we should taint the domain
due to problems encountered when the host and guest try to control the tray.
Two new domain configuration XML elements are added to enable/disable
the protected key management operations for a guest:
<domain>
...
<keywrap>
<cipher name='aes|dea' state='on|off'/>
</keywrap>
...
</domain>
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Because there are multiple potential reasons for an error, this
function logs any errors before returning NULL (since the caller won't
have the information needed to determine which was the reason for
failure).
Until now the virDomainListAllDomains API would lock the domain list and
then every single domain object to access and filter it. This would
potentially allow a unresponsive VM to block the whole daemon if a
*listAllDomains call would get stuck.
To avoid this problem this patch collects a list of referenced domain
objects first from the list and then unlocks it right away. The
expensive operation requiring locking of the domain object is executed
after the list lock is dropped. While a single blocked domain will still
lock up a listAllDomains call, the domain list won't be held locked and
thus other APIs won't be blocked.
Additionally this patch also fixes the lookup code, where we'd ignore
the vm->removing flag and thus potentially return domain objects that
would be deleted very soon so calling any API wouldn't make sense.
As other clients also could benefit from operating on a list of domain
objects rather than the public domain descriptors a new intermediate
API - virDomainObjListCollect - is introduced by this patch.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1181074
Extend it to a universal helper used for clearing lists of any objects.
Note that the argument type is specifically void * to allow implicit
typecasting.
Additionally add a helper that works on non-NULL terminated arrays once
we know the length.
Some platforms, like aarch64, don't have APIC but GIC. So there's
no reason to have <apic/> feature turned on. However, we are
still missing <gic/> feature. This commit introduces the feature
to XML parser and formatter, adds documentation and updates RNG
schema.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The phyp driver stuffed it into a DomainDefPtr during its attachdevice
routine, but the value is never advertised via capabilities so it should
be safe to drop.
Have the phyp driver use OSTYPE_LINUX, which is what it advertises via
capabilities.
We're about to allow IOThreads to be deleted, but an iothreadid may be
included in some domain thread sched, so add a new API to allow removing
an iothread from some entry.
Then during the writing of the threadsched data and an additional check
to determine whether the bitmap is all clear before writing it out.
Remove the iothreadspin array from cputune and replace with a cpumask
to be stored in the iothreadids list.
Adjust the test output because our printing goes in order of the iothreadids
list now.
Since it's only ever referenced in domain_conf.c, make the function
static, but also will need to move it to somewhere before it's referenced
rather than forward referencing it.
Add 'thread_id' to the virDomainIOThreadIDDef as a means to store the
'thread_id' as returned from the live qemu monitor data.
Remove the iothreadpids list from _qemuDomainObjPrivate and replace with
the new iothreadids 'thread_id' element.
Rather than use the default numbering scheme of 1..number of iothreads
defined for the domain, use the iothreadid's list for the iothread_id
Since iothreadids list keeps track of the iothread_id's, these are
now used in place of the many places where a for loop would "know"
that the ID was "+ 1" from the array element.
The new tests ensure usage of the <iothreadid> values for an exact number
of iothreads and the usage of a smaller number of <iothreadid> values than
iothreads that exist (and usage of the default numbering scheme).
Adding a new XML element 'iothreadids' in order to allow defining
specific IOThread ID's rather than relying on the algorithm to assign
IOThread ID's starting at 1 and incrementing to iothreads count.
This will allow future patches to be able to add new IOThreads by
a specific iothread_id and of course delete any exisiting IOThread.
Each iothreadids element will have 'n' <iothread> children elements
which will have attribute "id". The "id" will allow for definition
of any "valid" (eg > 0) iothread_id value.
On input, if any <iothreadids> <iothread>'s are provided, they will
be marked so that we only print out what we read in.
On input, if no <iothreadids> are provided, the PostParse code will
self generate a list of ID's starting at 1 and going to the number
of iothreads defined for the domain (just like the current algorithm
numbering scheme). A future patch will rework the existing algorithm
to make use of the iothreadids list.
On output, only print out the <iothreadids> if they were read in.
This is basically turning qemuDomObjEndAPI into a more general
function. Other drivers which gets a reference to domain objects may
benefit from this function too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
But the internal API stays the same, and we just convert the value as
needed. Not useful yet, but this is the beginning step of using an enum
for ostype throughout the code.
When parsing XML, we validate the passed ostype + arch combo against
the detected hypervisor capabilities. This has led to the following
problem:
- Define x86 qemu guest
- qemu is inadvertently removed from the host
- libvirtd is restarted. fails to parse VM config since arch is removed
- 'virsh list --all' is now empty, user is wondering where their VMs went
Add a new internal flag VIR_DOMAIN_DEF_PARSE_SKIP_OSTYPE_CHECKS. Use
it when loading VM and snapshot configs from disk.
https://bugzilla.redhat.com/show_bug.cgi?id=1043572
Add VIR_DOMAIN_INPUT_BUS_PARALLELS device type
to handle domain configuration properly for
parallels containers, when VNC is enabled.
When domain configuration has at least one
'graphics', there should be mouse and keyboard.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
We support VNC for containers to have the same
interface with VMs. At this moment it just renders
linux text console.
Of course we don't pass any physical devices and
don't emulate virtual devices. Our VNC server
renders text from terminal master and sends
input events from VNC client to terminal.
So add special video type VIR_DOMAIN_VIDEO_TYPE_PARALLELS
for these pseudo-devices.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Instead of always using controller 0 and incrementing port number,
respect the maximum port numbers of controllers and use all of them.
Ports for virtio consoles are quietly reserved, but not formatted
(neither in XML nor on QEMU command line).
Also rejects duplicate virtio-serial addresses.
https://bugzilla.redhat.com/show_bug.cgi?id=890606https://bugzilla.redhat.com/show_bug.cgi?id=1076708
Test changes:
* virtio-auto.args
Filling out the port when just the controller is specified.
switched from using
maxport + 1
to:
first free port on the controller
* virtio-autoassign.args
Filling out the address when no <address> is specified.
Started using all the controllers instead of 0, also discards
the bus value.
* xml -> xml output of virtio-auto
The port assignment is no longer done as a part of XML parsing,
so the unspecified values stay 0.
virDomainHasDiskMirror() currently detects only jobs that add the mirror
elements. Since some operations like migration are interlocked by
existing block jobs on the given domain the check needs to be
instrumented to check regular jobs too.
This patch renames virDomainHasDiskMirror to virDomainHasDiskBlockjob
and adds an argument that allows to select that it returns true only for
block copy jobs as those interlock making the domain persistent.
Other two uses trigger on any block job type.
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When the synchronous pivot option is selected, libvirt would not update
the backing chain until the job was exitted. Some applications then
received invalid data as their job serialized first.
This patch removes polling to wait for the ABORT/PIVOT job completion
and replaces it with a condition. If a synchronous operation is
requested the update of the XML is executed in the job of the caller of
the synchronous request. Otherwise the monitor event callback uses a
separate worker to update the backing chain with a new job.
This is a regression since 1a92c71910
When the ABORT job is finished synchronously you get the following call
stack:
#0 qemuBlockJobEventProcess
#1 qemuDomainBlockJobImpl
#2 qemuDomainBlockJobAbort
#3 virDomainBlockJobAbort
While previously or while using the _ASYNC flag you'd get:
#0 qemuBlockJobEventProcess
#1 processBlockJobEvent
#2 qemuProcessEventHandler
#3 virThreadPoolWorker
Recently we've fixed a bug where the status XML could not be parsed as
the parser used absolute path XPath queries. This test enhancement tests
all XML files used in the qemu-xml-2-xml test as a part of a status XML
snippet to see whether they are parsed correctly. The status XML-2-XML is
currently tested in 223 cases with this patch.
Add a few helpers that allow to operate with memory device definitions
on the domain config and use them to implement memory device coldplug in
the qemu driver.
This patch adds code that parses and formats configuration for memory
devices.
A simple configuration would be:
<memory model='dimm'>
<target>
<size unit='KiB'>524287</size>
<node>0</node>
</target>
</memory>
A complete configuration of a memory device:
<memory model='dimm'>
<source>
<pagesize unit='KiB'>4096</pagesize>
<nodemask>1-3</nodemask>
</source>
<target>
<size unit='KiB'>524287</size>
<node>1</node>
</target>
</memory>
This patch preemptively forbids use of the <memory> device in individual
drivers so the users are warned right away that the device is not
supported.
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.
To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
virnetdevopenvswitch.h declares a few functions that can be called to
add ports to and remove them from OVS bridges, and retrieve the
migration data for a port. It does not contain any data definitions
that are used by domain_conf.h. But for some reason, domain_conf.h
virnetdevopenvswitch.h should be directly #including it. This adds a
few lines to the project, but saves all the files that don't need it
from the extra computing, and makes the dependencies more clear cut.
We're parsing memballoon status period as unsigned int, but when we're
trying to set it, both we and qemu use signed int. That means large
values will get wrapped around to negative one resulting in error.
Basically the same problem as commit e3a7b874 was dealing with when
updating live domain.
QEMU changed the accepted value to int64 in commit 1f9296b5, but even
values as INT_MAX don't make sense since the value passed means seconds.
Hence adding capability flag for this change isn't worth it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140958
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
As pointed out by jtomko in his review of the IOThreads pinning code:
http://www.redhat.com/archives/libvir-list/2015-March/msg00495.html
there are some comments sprinkled in indicating IOThreads were using
the same structure as the VcpuPin code...
This is the first patch of a few that will change the virDomainVcpuPin*
structures and code to just virDomainPin* - starting with the data
structure naming...
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
virDomainNetFindIdx no longer returns info whether device was not found,
or there was multiple matches. Additionally it already handle error
reporting. Introduce virDomainHasNet which does a simple task, without
implicit error reporting.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1135491
More or less a virtual copy of the existing virDomainVcpuPin{Add|Del} API's.
NB: The IOThreads implementation "reused" the virDomainVcpuPinDefPtr
since it provided everything necessary - an "id" and a "map" for each
thread id configured.
Since adding the support for scheduler policy settings in commit
8680ea97, there are two enums with the same information. That was
caused by rewriting the patch since first draft.
Find out thanks to clang, but there was no impact whatsoever.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1142631
This patch resolves a situation where the same "<target dev='$name'...>"
can be used for multiple disks in the domain.
While the $name is "mostly" advisory regarding the expected order that
the disk is added to the domain and not guaranteed to map to the device
name in the guest OS, it still should be unique enough such that other
domblk* type operations can be performed.
Without the patch, the domblklist will list the same Target twice:
$ virsh domblklist $dom
Target Source
------------------------------------------------
sda /var/lib/libvirt/images/file.qcow2
sda /var/lib/libvirt/images/file.img
Additionally, getting domblkstat, domblkerror, domblkinfo, and other block*
type calls will not be able to reference the second target.
Fortunately, hotplug disallows adding a "third" sda value:
$ qemu-img create -f raw /var/lib/libvirt/images/file2.img 10M
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sda
error: Failed to attach disk
error: operation failed: target sda already exists
$
BUT, it since 'sdb' doesn't exist one would get the following on the same
hotplug attempt, but changing to use 'sdb' instead of 'sda'
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sdb
error: Failed to attach disk
error: internal error: unable to execute QEMU command 'device_add': Duplicate ID 'scsi0-0-1' for device
$
Since we cannot fix this issue at parsing time, the best that can be done so
as to not "lose" a domain is to make the check prior to starting the guest
with the results as follows:
$ virsh start $dom
error: Failed to start domain $dom
error: XML error: target 'sda' duplicated for disk sources '/var/lib/libvirt/images/file.qcow2' and '/var/lib/libvirt/images/file.img'
$
Running 'make check' found a few more instances in the tests where this
duplicated target dev value was being used. These also exhibited some
duplicated 'id=' values (negating the uniqueness argument of aliases) in
the corresponding .args file and of course the *xmlout version of a few
input XML files.
At least Xen supports backend drivers in another domain (aka "driver
domain"). This patch introduces an XML config option for specifying the
backend domain name for <disk> and <interface> devices. E.g.
<disk>
<backenddomain name='diskvm'/>
...
</disk>
<interface type='bridge'>
<backenddomain name='netvm'/>
...
</interface>
In the future, same option will be needed for USB devices (hostdev
objects), but for now libxl doesn't have support for PVUSB.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Move the existing virDomainDefNew to virDomainDefNewFull as it's setting
a few things in the conf and re-introduce virDomainDefNew as a function
without parameters for common use.
For a while now there are two places that gather information about NUMA
related guest configuration. While the XML can't be changed we can at
least store the data in one place in the definition.
Rename the numatune_conf.[ch] files to numa_conf as later patches will
move the rest of the definitions from the cpu definition to this one.
Add an XML attribute to allow disabling merge of rx buffers
on the host:
<interface ...>
...
<model type='virtio'/>
<driver ...>
<host mrg_rxbuf='off'/>
</driver>
</interface>
https://bugzilla.redhat.com/show_bug.cgi?id=1186886
In order for QEMU vCPU (and other) threads to run with RT scheduler,
libvirt needs to take care of that so QEMU doesn't have to run privileged.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178986
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The helpers will be useful when implementing hotplug and coldplug of
random number generator devices.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When adding devices to the definition it's useful to check whether the
devices don't reside on a conflicting address. This patch adds a helper
that iterates all device info and compares the addresses with the given
info.
Do the allocation first, then add the actual device.
The second part should never fail. This is good
for live hotplug where we don't want to remove the device
on OOM after the monitor command succeeded.
The only change in behavior is that on failure, the
vmdef->consoles array is freed, not just the first console.
Currently when launching the LXC controller we first write out
the plain, inactive XML configuration, then launch the controller,
then replace the file with the live status XML configuration.
By good fortune this hasn't caused any problems other than some
misleading error messages during failure scenarios.
This simplifies the code so it only writes out the XML once and
always writes the live status XML. To do this we need to handshake
with the child process, to make execution pause just before exec()
so we can write the XML status with the child PID present.
Ploop is a pseudo device which makeit possible to access
to an image in a file as a block device. Like loop devices,
but with additional features, like snapshots, write tracker
and without double-caching.
It used in PCS for containers and in OpenVZ. You can manage
ploop devices and images with ploop utility
(http://git.openvz.org/?p=ploop).
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
The virDomainDefineXMLFlags and virDomainCreateXML APIs both
gain new flags allowing them to be told to validate XML.
This updates all the drivers to turn on validation in the
XML parser when the flags are set
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
Add the possibility to have more than one IP address configured for a
domain network interface. IP addresses can also have a prefix to define
the corresponding netmask.
Currently, when there is an API that's blocking with locked domain and
second API that's waiting in virDomainObjListFindByUUID() for the domain
lock (with the domain list locked) no other API can be executed on any
domain on the whole hypervisor because all would wait for the domain
list to be locked. This patch adds new optional approach to this in
which the domain is only ref'd (reference counter is incremented)
instead of being locked and is locked *after* the list itself is
unlocked. We might consider only ref'ing the domain in the future and
leaving locking on particular APIs, but that's no tonight's fairy tale.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When one domain is being undefined and at the same time started, for
example, there is a possibility of a rare problem occuring.
- Thread 1 does virDomainUndefine(), has the lock, checks that the
domain is active and because it's not, calls
virDomainObjListRemove().
- Thread 2 does virDomainCreate() and tries to lock the domain.
- Thread 1 needs to lock domain list in order to remove the domain from
it, but must unlock domain first (proper order is to lock domain list
first and the domain itself second).
- Thread 2 grabs the lock, starts the domain and releases the lock.
- Thread 1 grabs the lock and removes the domain from list.
With this patch:
- The undefining domain gets marked as "to undefine" before it is
unlocked.
- If domain is found in any of the search APIs, it's returned only if
it is not marked as "to undefine". The check is done while the
domain is locked.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1150505
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
At the time that the network driver allocates a connection to a
network, the tap device that will be used hasn't yet been created -
that will be done later by qemu (or lxc or whoever) - but if the
network has macTableManager='libvirt', then when we do get around to
creating the tap device, we will need to add an entry for it to the
network bridge's fdb (forwarding database) *and* turn off learning and
unicast_flood for that tap device in the bridge's sysfs settings. This
means that qemu needs to know both the bridge name as well as the
setting of macTableManager, so we either need to create a new API to
retrieve that info, or just pass it back in the ActualNetDef that is
created during networkAllocateActualDevice. We choose the latter
method, since it's already done for the bridge device, and it has the
side effect of making the information available in domain status.
(NB: in the future, I think that the tap device should actually be
created by networkAllocateActualDevice(), as that will solve several
other problems, but that is a battle for another day, and this
information will still be useful outside the network driver)
Resolving symlinks can fail before mounting any file system if one file
system depends on another being mounted. Symlinks are now resolved in
two passes:
* Before any file system is mounted, but then we are more gentle if
the source path can't be accessed
* Right before mounting a file system, so that we are sure that we
have the resolved path... but then if it can't be accessed we raise
an error.
Add attribute to set vgamem_mb parameter of QXL device for QEMU. This
value sets the size of VGA framebuffer for QXL device. Default value in
QEMU is 8MB so reuse it also in libvirt to not break things.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The vram attribute was introduced to set the video memory but it is
usable only for few hypervisors excluding QEMU/KVM and the old XEN
driver. Only in case of QEMU the vram was used for QXL.
This patch updates the documentation to reflect current code in libvirt
and also changes the cases when we will set the default vram attribute.
It also fixes existing strange default value for VGA devices 9MB to 16MB
because the video ram should be rounded to power of two.
The change of default value could affect migrations but I found out that
QEMU always round the video ram to power of two internally so it's safe
to change the default value to the next closest power of two and also
silently correct every domain XML definition. And it's also safe because
we don't pass the value to QEMU.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Get mounted filesystems list, which contains hardware info of disks and its
controllers, from QEMU guest agent 2.2+. Then, convert the hardware info
to corresponding device aliases for the disks.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Some storage systems have internal support for snapshots. Libvirt should
be able to select a correct snapshot when starting a VM.
This patch adds a XML element to select a storage source snapshot for
the RBD protocol which supports this feature.
To track state of virtio channels this patch adds a new output-only
attribute called 'state' to the <target> element of virtio channels.
This will be later populated with the guest state of the channel.
Modify the structure _virDomainBlockIoTuneInfo to support these the new
options.
Change the initialization of the variable expectedInfo in qemumonitorjsontest.c
to avoid compiling problem.
Add documentation about the new xml options
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Commit 01b4de2b9f abstracts virDomainParseMemory()
for use by other functions in domain_conf.c
Extend the same for use, for functions outside of this file.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 6c9a8a4 (Oct 2014) exposed a long-standing issue on 32-bit
machines: code related to virDomainSetMemoryParameters has always
been documented as using a 64-bit limit, but it was implemented by
calling virDomainParseMemory which enforced an 'unsigned long'
limit. Since VIR_DOMAIN_MEMORY_PARAM_UNLIMITED capped to a
long is -1, but virDomainParseScaledValue no longer accepts
negative values, an attempt to use 2^53-1 as a hard memory limit
started failing the testsuite. However, the problem with capping
things artificially low has existed for much longer - ever since
commits 4888f0fb and 2e22f23 (Mar 2012) switched internal tracking
from 'unsigned long' to 'unsigned long long' (prior to that time,
the cap was a side-effect of the choice of types). We _have_ to
cap the balloon memory values, (no thanks to baked in 'unsigned long'
of API such as virDomainSetMaxMemory or virDomainGetInfo with no
counterpart API that guarantees 64-bit access to those numbers)
but memory parameters have never needed the artificial limit.
At any rate, the solution is to make the parser function gain a
parameter, and only do the reduced 32-bit cap for the values that
are constrained due to API.
* src/conf/domain_conf.h (_virDomainMemtune): Add comments.
* src/conf/domain_conf.c (virDomainParseMemory): Add parameter.
(virDomainDefParseXML): Adjust callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
This new attribute will control whether or not libvirt will pay
attention to guest notifications about changes to network device mac
addresses and receive filters. The default for this is 'no' (for
security reasons). If it is set to 'yes' *and* the specified device
model and connection support it (currently only macvtap+virtio) then
libvirt will watch for NIC_RX_FILTER_CHANGED events, and when it
receives one, it will issue a query-rx-filter command, retrieve the
result, and modify the host-side macvtap interface's mac address and
unicast/multicast filters accordingly.
The functionality behind this attribute will be in a later patch. This
patch merely adds the attribute to the top-level of a domain's
<interface> as well as to <network> and <portgroup>, and adds
documentation and schema/xml2xml tests. Rather than adding even more
test files, I've just added the net attribute in various applicable
places of existing test files.
This patch adds parsing/formatting code as well as documentation for
shared memory devices. This will currently be only accessible in QEMU
using it's ivshmem device, but is designed as generic as possible to
allow future expansion for other hypervisors.
In the devices section in the domain XML users may specify:
- For shmem device using a server:
<shmem name='shmem0'>
<server path='/tmp/socket-ivshmem0'/>
<size unit='M'>32</size>
<msi vectors='32' ioeventfd='on'/>
</shmem>
- For ivshmem device not using an ivshmem server:
<shmem name='shmem1'>
<size unit='M'>32</size>
</shmem>
Most of the configuration is made optional so it also allows
specifications like:
<shmem name='shmem1/>
<shmem name='shmem2'>
<server/>
</shmem>
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add options for tuning segment offloading:
<driver>
<host csum='off' gso='off' tso4='off' tso6='off'
ecn='off' ufo='off'/>
<guest csum='off' tso4='off' tso6='off' ecn='off' ufo='off'/>
</driver>
which control the respective host_ and guest_ properties
of the virtio-net device.
Cleanup virDomanDef structure from other nested structure and create
separate type definition for them.
Fix a typo in virDomainHugePage.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
For tuning the network, alternative devices
for creating tap and vhost devices can be specified via:
<backend tap='/dev/net/tun' vhost='/dev/net-vhost'/>
https://bugzilla.redhat.com/show_bug.cgi?id=1101574
Add an option 'iothreadpin' to the <cpuset> to allow for setting the
CPU affinity for each IOThread.
The iothreadspin will mimic the vcpupin with respect to being able to
assign each iothread to a specific CPU, although iothreads ids start
at 1 while vcpu ids start at 0. This matches the iothread naming scheme.
When using split UEFI image, it may come handy if libvirt manages per
domain _VARS file automatically. While the _CODE file is RO and can be
shared among multiple domains, you certainly don't want to do that on
the _VARS file. This latter one needs to be per domain. So at the
domain startup process, if it's determined that domain needs _VARS
file it's copied from this master _VARS file. The location of the
master file is configurable in qemu.conf.
Temporary, on per domain basis the location of master NVRAM file can
be overridden by this @template attribute I'm inventing to the
<nvram/> element. All it does is holding path to the master NVRAM file
from which local copy is created. If that's the case, the map in
qemu.conf is not consulted.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Up to now, users can configure BIOS via the <loader/> element. With
the upcoming implementation of UEFI this is not enough as BIOS and
UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
is programmable flash (although all writes to code section are
denied). Therefore we need new attribute @type which will
differentiate the two. Then, new attribute @readonly is introduced to
reflect the fact that some images are RO.
Moreover, the OVMF (which is going to be used mostly), works in two
modes:
1) Code and UEFI variable store is mixed in one file.
2) Code and UEFI variable store is separated in two files
The latter has advantage of updating the UEFI code without losing the
configuration. However, in order to represent the latter case we need
yet another XML element: <nvram/>. Currently, it has no additional
attributes, it's just a bare element containing path to the variable
store file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The new blockcopy API wants to reuse only a subset of the disk
hotplug parser - namely, we only care about the embedded
virStorageSourcePtr inside a <disk> XML. Strange as it may
seem, it was easier to just parse an entire disk definition,
then throw away everything but the embedded source, than it
was to disentangle the source parsing code from the rest of
the overall disk parsing function. All that I needed was a
couple of tweaks and a new internal flag that determines
whether the normally-mandatory target element can be
gracefully skipped, since everything else was already optional.
* src/conf/domain_conf.h (virDomainDiskSourceParse): New
prototype.
* src/conf/domain_conf.c (VIR_DOMAIN_XML_INTERNAL_DISK_SOURCE):
New flag.
(virDomainDiskDefParseXML): Honor flag to make target optional.
(virDomainDiskSourceParse): New function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add a new disk "driver" attribute "iothread" to be parsed as the thread
number for the disk to use. In order to more easily facilitate the usage
and configuration of the iothread, a "zero" for the attribute indicates
iothreads are not supported for the device and a positive value indicates
the specific thread to try and use.
Introduce XML to allowing adding iothreads to the domain. These can be
used by virtio-blk-pci devices in order to assign a specific thread to
handle the workload for the device. The iothreads are the official
implementation of the virtio-blk Data Plane that's been in tech preview
for QEMU.
QEMU 2.1 added support for the kvm=off option to the -cpu command,
allowing the KVM hypervisor signature to be hidden from the guest.
This enables disabling of some paravirualization features in the
guest as well as allowing certain drivers which test for the
hypervisor to load. Domain XML syntax is as follows:
<domain type='kvm>
...
<features>
...
<kvm>
<hidden state='on'/>
</kvm>
</features>
...
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
A future patch is going to wire up qemu active block commit jobs;
but as they have similar events and are canceled/pivoted in the
same way as block copy jobs, it is easiest to track all bookkeeping
for the commit job by reusing the <mirror> element. This patch
adds domain XML to track which job was responsible for creating a
mirroring situation, and adds a job='copy' attribute to all
existing uses of <mirror>. Along the way, it also massages the
qemu monitor backend to read the new field in order to generate
the correct type of libvirt job (even though it requires a
future patch to actually cause a qemu event that can be reported
as an active commit). It also prepares to update persistent XML
to match changes made to live XML when a copy completes.
* docs/schemas/domaincommon.rng: Enhance schema.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (_virDomainDiskDef): Add a field.
* src/conf/domain_conf.c (virDomainBlockJobType): String conversion.
(virDomainDiskDefParseXML): Parse job type.
(virDomainDiskDefFormat): Output job type.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Distinguish
active from regular commit.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set job type.
(qemuDomainBlockPivot, qemuDomainBlockJobImpl): Clean up job type
on completion.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml:
Update tests.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-active-commit.xml: New
file.
* tests/qemuxml2xmltest.c (mymain): Drive new test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Doing a blockcopy operation across a libvirtd restart is not very
robust at the moment. In particular, we are clearing the <mirror>
element prior to telling qemu to finish the job. Also, thanks to the
ability to request async completion, the user can easily regain
control prior to qemu actually finishing the effort, and they should
be able to poll the domain XML to see if the job is still going.
A future patch will fix things to actually wait until qemu is done
before modifying the XML to reflect the job completion. But since
qemu issues identical BLOCK_JOB_COMPLETE events regardless of whether
the job was cancelled (kept the original disk) or completed (pivoted
to the new disk), we have to track which of the two operations were
used to end the job. Furthermore, we'd like to avoid attempts to
end a job where we are already waiting on an earlier request to qemu
to end the job. Likewise, if we miss the qemu event (perhaps because
it arrived during a libvirtd restart), we still need enough state
recorded to be able to determine how to modify the domain XML once
we reconnect to qemu and manually learn whether the job still exists.
Although this patch doesn't actually fix the problem, it is a
preliminary step that makes it possible to track whether a job
has already begun steps towards completion.
* src/conf/domain_conf.h (virDomainDiskMirrorState): New enum.
(_virDomainDiskDef): Convert bool mirroring to new enum.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Handle new values.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Adjust
client.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
* docs/schemas/domaincommon.rng (diskMirror): Expose new values.
* docs/formatdomain.html.in (elementsDisks): Document it.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Create the structures and API's to hold and manage the iSCSI host device.
This extends the 'scsi_host' definitions added in commit id '5c811dce'.
A future patch will add the XML parsing, but that code requires some
infrastructure to be in place first in order to handle the differences
between a 'scsi_host' and an 'iSCSI host' device.
Split virDomainHostdevSubsysSCSI further. In preparation for having
either SCSI or iSCSI data, create a union in virDomainHostdevSubsysSCSI
to contain just a virDomainHostdevSubsysSCSIHost to describe the
'scsi_host' host device
This patch adds back the virDomainDef typedef into domain_conf and
makes all the numatune_conf functions independent of any virDomainDef
definitions.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1122205
Although the edits were changing in-memory XML, it was not flushed
to disk; so unless some other action changes XML, a libvirtd restart
would lose the changed information.
* src/conf/domain_conf.c (virDomainObjSetMetadata): Add parameter,
to save live status across restarts.
(virDomainSaveXML): Allow for test driver.
* src/conf/domain_conf.h (virDomainObjSetMetadata): Adjust
signature.
* src/bhyve/bhyve_driver.c (bhyveDomainSetMetadata): Adjust caller.
* src/lxc/lxc_driver.c (lxcDomainSetMetadata): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata): Likewise.
* src/test/test_driver.c (testDomainSetMetadata): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Added <capabilities> in the <features> section of LXC domains
configuration. This section can contain elements named after the
capabilities like:
<mknod state="on"/>, keep CAP_MKNOD capability
<sys_chroot state="off"/> drop CAP_SYS_CHROOT capability
Users can restrict or give more capabilities than the default using
this mechanism.
LXC network devices can now be assigned a custom NIC device name on the
container side. For example, this is configured with:
<interface type='network'>
<source network='default'/>
<guest dev="eth1"/>
</interface>
In this example the network card will appear as eth1 in the guest.
Commit 93e82727 introduced numatune_conf.h file that contains
typedefs already defined in domain_conf.h, such as:
- virDomainNumatune
- virDomainNumatunePtr
- virDomainDef
- virDomainDefPtr
As numatune_conf.h is included by domain_conf.h, clang
complains about redefinition of typedef and the build fails.
In order to fix it, drop typedefs already defined by numatume_conf.h
from domain_conf.h.
There were numerous places where numatune configuration (and thus
domain config as well) was changed in different ways. On some
places this even resulted in persistent domain definition not to be
stable (it would change with daemon's restart).
In order to uniformly change how numatune config is dealt with, all
the internals are now accessible directly only in numatune_conf.c and
outside this file accessors must be used.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since there was already public virDomainNumatune*, I changed the
private virNumaTune to match the same, so all the uses are unified and
public API is kept:
s/vir\(Domain\)\?Numa[tT]une/virDomainNumatune/g
then shrunk long lines, and mainly functions, that were created after
that:
sed -i 's/virDomainNumatuneMemPlacementMode/virDomainNumatunePlacement/g'
And to cope with the enum name, I haad to change the constants as
well:
s/VIR_NUMA_TUNE_MEM_PLACEMENT_MODE/VIR_DOMAIN_NUMATUNE_PLACEMENT/g
Last thing I did was at least a little shortening of already long
name:
s/virDomainNumatuneDef/virDomainNumatune/g
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There are many places with numatune-related code that should be put
into special numatune_conf and this patch creates a basis for that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch adds support for the QEMU vhost-user feature to libvirt.
vhost-user enables the communication between a QEMU virtual machine
and other userspace process using the Virtio transport protocol.
It uses a char dev (e.g. Unix socket) for the control plane,
while the data plane based on shared memory.
The XML looks like:
<interface type='vhostuser'>
<mac address='52:54:00:3b:83:1a'/>
<source type='unix' path='/tmp/vhost.sock' mode='server'/>
<model type='virtio'/>
</interface>
Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the future we might need to track state of individual images. Move
the readonly and shared flags to the virStorageSource struct so that we
can keep them in a per-image basis.
This introduces two new attributes "cmd_per_lun" and "max_sectors" same
with the names QEMU uses for virtio-scsi. An example of the XML:
<controller type='scsi' index='0' model='virtio-scsi' cmd_per_lun='50'
max_sectors='512'/>
The corresponding QEMU command line:
-device virtio-scsi-pci,id=scsi0,cmd_per_lun=50,max_sectors=512,
bus=pci.0,addr=0x3
Signed-off-by: Mike Perez <thingee@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When looking for a port to allocate, the port allocator didn't take in
consideration ports that are statically set by the user. Defining
these two graphics elements in the XML would cause an error, as the
port allocator would try to use the same port for the spice graphics
element:
<graphics type='spice' autoport='yes'/>
<graphics type='vnc' port='5900' autoport='no'/>
The new *[pP]ortReserved variables keep track of the ports that were
successfully tracked as used by the port allocator but that weren't
bound.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1081881
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The image labels are stored in the virStorageSource struct. Convert the
virDomainDiskDefGetSecurityLabelDef helper not to use the full disk def
and move it appropriately.
The current implementation of 'virsh blockcopy' (virDomainBlockRebase)
is limited to copying to a local file name. But future patches want
to extend it to also copy to network disks. This patch converts over
to a virStorageSourcePtr, although it should have no semantic change
visible to the user, in anticipation of those future patches being
able to use more fields for non-file destinations.
* src/conf/domain_conf.h (_virDomainDiskDef): Change type of
mirror information.
* src/conf/domain_conf.c (virDomainDiskDefParseXML): Localize
mirror parsing into new object.
(virDomainDiskDefFormat): Adjust clients.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl, qemuDomainBlockCopy): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
As part of the work on backing chains, I'm finding that it would
be easier to directly manipulate chains of pointers (adding a
snapshot merely adjusts pointers to form the correct list) rather
than copy data from one struct to another. This patch converts
domain disk source to be a pointer.
In this patch, the pointer is ALWAYS allocated (thanks in part to
the previous patch forwarding all disk def allocation through a
common point), and all other changse are just mechanical fallout of
the new type; there should be no functional change. It is possible
that we may want to leave the pointer NULL for a cdrom with no
medium in a later patch, but as that requires a closer audit of the
source to ensure we don't fault on a null dereference, I didn't do
it here.
* src/conf/domain_conf.h (_virDomainDiskDef): Change type of src.
* src/conf/domain_conf.c: Adjust all clients.
* src/security/security_selinux.c: Likewise.
* src/qemu/qemu_domain.c: Likewise.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_conf.c: Likewise.
* src/qemu/qemu_process.c: Likewise.
* src/qemu/qemu_migration.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
* src/lxc/lxc_controller.c: Likewise.
* tests/securityselinuxlabeltest.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
A future patch wants to create disk definitions with non-zero
default contents; to avoid crashes, all callers that allocate
a disk definition should go through a common point.
I found allocation points by looking for any code that increments
ndisks, as well as any matches for ALLOC.*disk. Most places that
modified ndisks were covered by the parse from XML to domain/device
definition by initial domain creation or device hotplug; I also
hand-checked all drivers that generate a device struct on the
fly during getXMLDesc.
* src/conf/domain_conf.h (virDomainDiskDefNew): New prototype.
* src/conf/domain_conf.c (virDomainDiskDefNew): New function.
(virDomainDiskDefParseXML): Use it.
* src/parallels/parallels_driver.c (parallelsAddHddInfo):
Likewise.
* src/qemu/qemu_command.c (qemuParseCommandLine): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc): Likewise.
* src/vmx/vmx.c (virVMXParseDisk): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenParseSxpr):
Likewise.
* src/xenxs/xen_xm.c (xenParseXM): Likewise.
* src/libvirt_private.syms (domain_conf.h): Export it.
Signed-off-by: Eric Blake <eblake@redhat.com>
In "src/conf/domain_conf.h" there are many enum declarations. The
cleanup in this header filer was started, but it wasn't enough and
there are many other files that has enum variables declared. So, the
commit was starting to be big. This commit finish the cleanup in this
header file and in other files that has enum variables, parameters,
or functions declared.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In "src/conf/domain_conf.h" there are many enumerations (enum)
declarations to be converted as a typedef too. As mentioned before,
it's better to use a typedef for variable types, function types and
other usages. I think this file has most of those enum declarations
at "src/conf/". So, me and Eric Blake plan to keep the cleanups all
over the source code. This time, most of the files changed in this
commit are related to part of one file: "src/conf/domain_conf.h".
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
commit e31b5cf393 attempted to fix libvirt's
VIR_DOMAIN_EVENT_ID_RTC_CHANGE, which is documentated to always
provide the new offset of the domain's real time clock from UTC. The
problem was that, in the case that qemu is provided with an "-rtc
base=x" where x is an absolute time (rather than "utc" or
"localtime"), the offset sent by qemu's RTC_CHANGE event is *not* the
new offset from UTC, but rather is the sum of all changes to the
domain's RTC since it was started with base=x.
So, despite what was said in commit e31b5cf393, if we assume that
the original value stored in "adjustment" was the offset from UTC at
the time the domain was started, we can always determine the current
offset from UTC by simply adding the most recent (i.e. current) offset
from qemu to that original adjustment.
This patch accomplishes that by storing the initial adjustment in the
domain's status as "adjustment0". Each time a new RTC_CHANGE event is
received from qemu, we simply add adjustment0 to the value sent by
qemu, store that as the new adjustment, and forward that value on to
any event handler.
This patch (*not* e31b5cf393, which should be reverted prior to
applying this patch) fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=964177
(for the case where basis='utc'. It does not fix basis='localtime')
This reverts commit e31b5cf393.
This commit attempted to work around a bug in the offset value
reported by qemu's RTC_CHANGE event in the case that a variable base
date was given on the qemu commandline. The patch mixed up the math
involved in arriving at the corrected offset to report, and in the
process added an unnecessary private attribute to the clock
element. Since that element is private/internal and not used by anyone
else, it makes sense to simplify things by removing it.
The VIR_ENUM_DECL/VIR_ENUM_IMPL helper macros already append 'Type'
to the enum name being converted; it looks silly to have functions
with 'TypeType' in their name. Even though some of our enums have
to have a 'Type' suffix, the corresponding string conversion
functions do not.
* src/conf/secret_conf.h (VIR_ENUM_DECL): Rename virSecretUsageType.
* src/conf/storage_conf.h (VIR_ENUM_DECL): Rename
virStoragePoolAuthType, virStoragePoolSourceAdapterType,
virStoragePartedFsType.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainFSDefParseXML, virDomainFSDefFormat): Update callers.
* src/conf/secret_conf.c (virSecretDefParseUsage)
(virSecretDefFormatUsage): Likewise.
* src/conf/storage_conf.c (virStoragePoolDefParseAuth)
(virStoragePoolDefParseSource, virStoragePoolSourceFormat):
Likewise.
* src/lxc/lxc_controller.c (virLXCControllerSetupLoopDevices):
Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskPartFormat): Likewise.
* src/util/virstorageencryption.c (virStorageEncryptionSecretParse)
(virStorageEncryptionSecretFormat): Likewise.
* tools/virsh-secret.c (cmdSecretList): Likewise.
* src/libvirt_private.syms (secret_conf.h, storage_conf.h): Export
corrected names.
Signed-off-by: Eric Blake <eblake@redhat.com>
In "src/conf/" there are many enumeration (enum) declarations.
Similar to the recent cleanup to "src/util" directory, it's
better to use a typedef for variable types, function types and
other usages. Other enumeration and folders will be changed to
typedef's in the future. Most of the files changed in this
commit are related to snapshot (snapshot_conf) enums.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In "src/conf/" there are many enumeration (enum) declarations.
Similar to the recent cleanup to "src/util" directory, it's
better to use a typedef for variable types, function types and
other usages. Other enumeration and folders will be changed to
typedef's in the future. Most of the files changed in this
commit are related to storage (storage_conf) enums.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Switch over to storing of the backing chain as a recursive
virStorageSource structure.
This is a string based move. Currently the first element will be present
twice in the backing chain as currently the retrieval function stores
the parent in the newly detected chain. This will be fixed later.
Remove the pointer from def->cputune.vcpupin after unplugging
the CPU and also free the bitmap contained in the structure
by calling virDomainVcpuPinDel instead of VIR_FREE.
Introduced by commit 0df1a79.
This makes virDomainLookupVcpuPin redundant.
https://bugzilla.redhat.com/show_bug.cgi?id=1088165
Since it is an abbreviation, PCI should always be fully
capitalized or full lower case, never Pci.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since it is an abbreviation, USB should always be fully
capitalized or full lower case, never Usb.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since it is an abbreviation, SCSI should always be fully
capitalized or full lower case, never Scsi.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
nmdm is a FreeBSD driver which allows to create a pair of tty
devices one of which is passed to the guest and second is used
by the client.
This patch adds new 'nmdm' character device type. Its definition
looks this way:
<serial type='nmdm'>
<source master='/dev/nmdm0A' slave='/dev/nmdm0B'/>
</serial>
Master is passed to the hypervisior and slave is used for client
connection.
Also implement domainOpenConsole() for bhyve driver based on that.
Now that we have a dedicated type for representing a disk source,
we might as well parse and format directly into that type instead
of piecemeal into pointers to members of the type.
* src/conf/domain_conf.h (virDomainDiskSourceDefFormatInternal)
(virDomainDiskSourceDefParse): Rename...
(virDomainDiskSourceFormat, virDomainDiskSourceParse): ...and
compress signatures.
* src/conf/domain_conf.c (virDomainDiskSourceParse)
(virDomainDiskSourceFormat): Rewrite to use common struct.
(virDomainDiskSourceDefFormat): Delete.
(virDomainDiskDefParseXML, virDomainDiskDefFormat): Update
callers.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefParseXML)
(virDomainSnapshotDiskDefFormat): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Move some functions out of domain_conf for use in the next
patch where snapshot starts to directly use structs in
virstoragefile.
* src/conf/domain_conf.c (virDomainDiskDefFree)
(virDomainDiskSourcePoolDefParse): Adjust callers.
(virDomainDiskSourceDefClear, virDomainDiskSourcePoolDefFree)
(virDomainDiskAuthClear): Move...
* src/util/virstoragefile.c (virStorageSourceClear)
(virStorageSourcePoolDefFree, virStorageSourceAuthClear): ...and
rename.
* src/conf/domain_conf.h (virDomainDiskAuthClear): Drop
declaration.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Adjust
caller.
* src/util/virstoragefile.h: Declare them.
* src/libvirt_private.syms (virstoragefile.h): Export them.
Signed-off-by: Eric Blake <eblake@redhat.com>
With this patch, all information related to a host resource in
a storage file backing chain now lives in util/virstoragefile.h.
The next step will be to consolidate various places that have
been tracking backing chain details to all use a common struct.
The changes to tools/Makefile.am were made necessary by the
fact that virstorageencryption includes uses of libxml, and is
now pulled in by inclusion from virstoragefile.h. No
additional libraries are linked into the final image, and in
comparison, the build of the setuid library in src/Makefile.am
already was using LIBXML_CFLAGS via AM_CFLAGS.
* src/conf/domain_conf.h (virDomainDiskSourceDef): Move...
* src/util/virstoragefile.h (virStorageSource): ...and rename.
* src/conf/domain_conf.c (virDomainDiskSourceDefClear)
(virDomainDiskAuthClear): Adjust clients.
* tools/Makefile.am (virt_login_shell_CFLAGS)
(virt_host_validate_CFLAGS): Add libxml headers.
Signed-off-by: Eric Blake <eblake@redhat.com>
This one is a relatively easy move. We don't ever convert the
enum to or from strings (it is inferred from other elements in
the xml, rather than directly represented).
* src/conf/domain_conf.h (virDomainDiskSecretType): Move...
* src/util/virstoragefile.h (virStorageSecreteType): ...and
rename.
* src/conf/domain_conf.c (virDomainDiskSecretType): Drop unused
enum conversion.
(virDomainDiskAuthClear, virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Adjust clients.
* src/qemu/qemu_command.c (qemuGetSecretString): Likewise.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePoolAuth):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Another struct being moved to util. This one doesn't have as
much use yet, thankfully.
* src/conf/domain_conf.h (virDomainDiskSourcePoolMode)
(virDomainDiskSourcePoolDef): Move...
* src/util/virstoragefile.h (virStorageSourcePoolMode)
(virStorageSourcePoolDef): ...and rename.
* src/conf/domain_conf.c (virDomainDiskSourcePoolDefFree)
(virDomainDiskSourceDefClear, virDomainDiskSourcePoolDefParse)
(virDomainDiskDefParseXML, virDomainDiskSourceDefParse)
(virDomainDiskSourceDefFormatInternal)
(virDomainDiskDefForeachPath, virDomainDiskSourceIsBlockType):
Adjust clients.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virstoragefile.h): ...as appropriate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Encryption keys can be associated with each source file in a
backing chain; as such, this file belongs more in util/ where
it can be used by virstoragefile.h.
* src/conf/storage_encryption_conf.h: Rename...
* src/util/virstorageencryption.h: ...to this.
* src/conf/storage_encryption_conf.c: Rename...
* src/util/virstorageencryption.c: ...to this.
* src/Makefile.am (ENCRYPTION_CONF_SOURCES, CONF_SOURCES)
(UTIL_SOURCES): Update to new file names.
* src/libvirt_private.syms: Likewise.
* src/conf/domain_conf.h: Update client.
* src/conf/storage_conf.h: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
In order to reuse the newly-created host-side disk struct in
the virstoragefile backing chain code, I first have to move
it to util/. This starts the process, by first moving the
security label structures.
* src/conf/domain_conf.h (virDomainDefGenSecurityLabelDef)
(virDomainDiskDefGenSecurityLabelDef, virSecurityLabelDefFree)
(virSecurityDeviceLabelDefFree, virSecurityLabelDef)
(virSecurityDeviceLabelDef): Move...
* src/util/virseclabel.h: ...to new file.
(virSecurityLabelDefNew, virSecurityDeviceLabelDefNew): Rename the
GenSecurity functions.
* src/qemu/qemu_process.c (qemuProcessAttach): Adjust callers.
* src/security/security_manager.c (virSecurityManagerGenLabel):
Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/util/virseclabel.c: New file.
* src/conf/domain_conf.c: Move security code, and fix fallout.
* src/Makefile.am (UTIL_SOURCES): Build new file.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virseclabel.h): ...to new section.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, <cputune><shares>0</shares></cputune> is treated
as if it were not specified.
Treat is as a valid value if it was explicitly specified
and write it to the cgroups.
It's finally time to start tracking disk backing chains in
<domain> XML. The first step is to start refactoring code
so that we have an object more convenient for representing
each host source resource in the context of a single guest
<disk>. Ultimately, I plan to move the new type into src/util
where it can be reused by virStorageFile, but to make the
transition easier to review, this patch just creates the
new type then fixes everything until it compiles again.
* src/conf/domain_conf.h (_virDomainDiskDef): Split...
(_virDomainDiskSourceDef): ...to new struct.
(virDomainDiskAuthClear): Use new type.
* src/conf/domain_conf.c (virDomainDiskDefFree): Split...
(virDomainDiskSourceDefClear): ...to new function.
(virDomainDiskGetType, virDomainDiskSetType)
(virDomainDiskGetSource, virDomainDiskSetSource)
(virDomainDiskGetDriver, virDomainDiskSetDriver)
(virDomainDiskGetFormat, virDomainDiskSetFormat)
(virDomainDiskAuthClear, virDomainDiskGetActualType)
(virDomainDiskDefParseXML, virDomainDiskSourceDefFormat)
(virDomainDiskDefFormat, virDomainDiskDefForeachPath)
(virDomainDiskDefGetSecurityLabelDef)
(virDomainDiskSourceIsBlockType): Adjust all users.
* src/lxc/lxc_controller.c (virLXCControllerSetupDisk):
Likewise.
* src/lxc/lxc_driver.c (lxcDomainAttachDeviceMknodHelper):
Likewise.
* src/qemu/qemu_command.c (qemuAddRBDHost, qemuParseRBDString)
(qemuParseDriveURIString, qemuParseGlusterString)
(qemuParseISCSIString, qemuParseNBDString)
(qemuDomainDiskGetSourceString, qemuBuildDriveStr)
(qemuBuildCommandLine, qemuParseCommandLineDisk)
(qemuParseCommandLine): Likewise.
* src/qemu/qemu_conf.c (qemuCheckSharedDevice)
(qemuAddISCSIPoolSourceHost, qemuTranslateDiskSourcePool):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainUpdateDeviceConfig)
(qemuDomainPrepareDiskChainElement)
(qemuDomainSnapshotCreateInactiveExternal)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotUndoSingleDiskActive)
(qemuDomainBlockPivot, qemuDomainBlockJobImpl)
(qemuDomainBlockCopy, qemuDomainBlockCommit): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase)
(qemuProcessInitPasswords): Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/storage/storage_driver.c (virStorageFileInitFromDiskDef):
Likewise.
* tests/securityselinuxlabeltest.c (testSELinuxLoadDef):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
A future patch will split virDomainDiskDef, in order to track
multiple host resources per guest <disk>. To reduce the size
of that patch, I've factored out the four most common accesses
into functions, so that I can incrementally upgrade the code
base to use the accessors, and so that code that doesn't care
about the distinction of per-file details won't have to be
changed when the struct changes.
* src/conf/domain_conf.h (virDomainDiskGetType)
(virDomainDiskSetType, virDomainDiskGetSource)
(virDomainDiskSetSource, virDomainDiskGetDriver)
(virDomainDiskSetDriver, virDomainDiskGetFormat)
(virDomainDiskSetFormat): New prototypes.
* src/conf/domain_conf.c (virDomainDiskGetType)
(virDomainDiskSetType, virDomainDiskGetSource)
(virDomainDiskSetSource, virDomainDiskGetDriver)
(virDomainDiskSetDriver, virDomainDiskGetFormat)
(virDomainDiskSetFormat): Implement them.
* src/libvirt_private.syms (domain_conf.h): Export them.
Signed-off-by: Eric Blake <eblake@redhat.com>
The offset of virDomainDeviceInfo structure within a device definition
varies with device type and some types do not contain the info structure
at all. This new API makes it easier to access the info structure from a
generic virDomainDeviceDef structure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When checking compatibility of a device with a domain definition, we
should know what we're going to do with the device. Because we may need
to check for different things when we're attaching a new device versus
detaching an existing device.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Before refactoring this struct, I found it helpful to track which
'int' fields really contain an enum value.
* src/conf/domain_conf.h (_virDomainDiskDef): Add comments.
Signed-off-by: Eric Blake <eblake@redhat.com>
This fixes a possible double free. In virNetworkAssignDef() if
virBitmapNew() fails, then virNetworkObjFree(network) is called.
However, with network->def pointing to actual @def. So if caller
frees @def again, ...
Moreover, this fixes one possible memory leak too. In
virInterfaceAssignDef() if appending to the list of interfaces
fails, we ought to call virInterfaceObjFree() instead of bare
VIR_FREE().
Although, in order to do that some array size variables needs
to be turned into size_t rather than int.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virDomainGetRootFilesystem method can be generalized to allow
any filesystem path to be obtained.
While doing this, start a new test case for purpose of testing various
helper methods in the domain_conf.{c,h} files, such as this one.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
At this point it has a limited functionality and is highly
experimental. Supported domain operations are:
* define
* start
* destroy
* dumpxml
* dominfo
It's only possible to have only one disk device and only one
network, which should be of type bridge.
There is no keyboard support currently in libvirt.
For some platforms (PPC64 QEMU) this makes graphics unusable,
since the keyboard is not implicit and it can't be added via libvirt.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This new flag is to be used for tainting domains which
XML definition was altered at runtime by a hook script.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
All the data for getting the actual type is present in the domain
config. There is no need to have this function private to the qemu
driver and it will be re-used later in other parts of libvirt
Add a new character device backend called 'spiceport' that uses
spice's channel for communications and apart from spicevmc can be used
as a backend for any character device from libvirt's point of view.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add a new <timer> for the HyperV reference time counter enlightenment
and the iTSC reference page for Windows guests.
This feature provides a paravirtual approach to track timer events for
the guest (similar to kvmclock) with the option to use real hardware
clock on systems with a iTSC with compensation across various hosts.
This commit allows to attach/detach a <filesystem> device in qemu. For
this purpose I'm introducing two new functions: virDomainFSInsert() and
virDomainFSRemove() and adding necessary code in the qemu driver. It
compares filesystems based on their "destination" folder. So if two
filesystems share the same destination, they are considered equal and
the qemu driver would reject the insertion.
Signed-off-by: Matthieu Coudron <mattator@gmail.com>
spice-server offers an API to disable file transfer messages
on the agent channel between the client and the guest.
This is supported in qemu through the disable-agent-file-xfer option.
This patch exposes this option to libvirt.
Adds a new element 'filetransfer', with one property,
'enable', which accepts a boolean.
Default is enabled, for backward compatibility.
Depends on the capability exported in the first patch of the series.
Signed-off-by: Francesco Romani <fromani@redhat.com>
This patch introduces new xml elements under <blkiotune>,
we use these new elements to setup the throttle blkio
cgroup for domain. The new blkiotune node looks like this:
<blkiotune>
<device>
<path>/path/to/block</path>
<weight>1000</weight>
<read_iops_sec>10000</read_iops_sec>
<write_iops_sec>10000</write_iops_sec>
<read_bytes_sec>1000000</read_bytes_sec>
<write_bytes_sec>1000000</write_bytes_sec>
</device>
</blkiotune>
Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Before this patch, the translation function still needs a second ugly
helper function to actually format the command line for qemu. But if we
do the right stuff in the translation function, we don't have to bother
with the second function any more.
This patch removes the messy qemuBuildVolumeString function and changes
qemuTranslateDiskSourcePool to set stuff up correctly so that the
regular code paths meant for volumes can be used to format the command
line correctly.
For this purpose a new helper "qemuDiskGetActualType()" is introduced to
return the type of the volume in a pool.
As a part of the refactor the qemuTranslateDiskSourcePool function is
fixed to do decisions based on the pool type instead of the volume type.
This allows to separate pool-type-specific stuff more clearly and will
ease addition of other pool types that will require certain other
operations to get the correct pool source.
The previously fixed tests should make sure that we don't break stuff
that was working before.
The linux kernel recently added support for paravirtual spinlock
handling to avoid performance regressions on overcomitted hosts. This
feature needs to be turned in the hypervisor so that the guest OS is
notified about the possible support.
This patch adds a new feature "paravirt-spinlock" to the XML and
supporting code to enable the "kvm_pv_unhalt" pseudo CPU feature in
qemu.
https://bugzilla.redhat.com/show_bug.cgi?id=1008989
Currently we were storing domain feature flags in a bit field as the
they were either enabled or disabled. New features such as paravirtual
spinlocks however can be tri-state as the default option may depend on
hypervisor version.
To allow storing tri-state feature state in the same place instead of
having to declare dedicated variables for each feature this patch
refactors the bit field to an array.
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/conf/domain_conf, and their fallout.
Several things to note: virObjectLock() requires a non-const
argument; if this were C++, we could treat the locking field
as 'mutable' and allow locking an otherwise 'const' object, but
that is a more invasive change, so I instead dropped attempts
to be const-correct on domain lookup. virXMLPropString and
friends require a non-const xmlNodePtr - this is because libxml2
is not a const-correct library. We could make the src/util/virxml
wrappers cast away const, but I figured it was easier to not
try to mark xmlNodePtr as const. Finally, virDomainDeviceDefCopy
was a rather hard conversion - it calls virDomainDeviceDefPostParse,
which in turn in the xen driver was actually modifying the domain
outside of the current device being visited. We should not be
adding a device on the first per-device callback, but waiting until
after all per-device callbacks are complete.
* src/conf/domain_conf.h (virDomainObjListFindByID)
(virDomainObjListFindByUUID, virDomainObjListFindByName)
(virDomainObjAssignDef, virDomainObjListAdd): Drop attempt at
const.
(virDomainDeviceDefCopy): Use intended type.
(virDomainDeviceDefParse, virDomainDeviceDefPostParseCallback)
(virDomainVideoDefaultType, virDomainVideoDefaultRAM)
(virDomainChrGetDomainPtrs): Make const-correct.
* src/conf/domain_conf.c (virDomainObjListFindByID)
(virDomainObjListFindByUUID, virDomainObjListFindByName)
(virDomainDeviceDefCopy, virDomainObjListAdd)
(virDomainObjAssignDef, virDomainHostdevSubsysUsbDefParseXML)
(virDomainHostdevSubsysPciOrigStatesDefParseXML)
(virDomainHostdevSubsysPciDefParseXML)
(virDomainHostdevSubsysScsiDefParseXML)
(virDomainControllerModelTypeFromString)
(virDomainTPMDefParseXML, virDomainTimerDefParseXML)
(virDomainSoundCodecDefParseXML, virDomainSoundDefParseXML)
(virDomainWatchdogDefParseXML, virDomainRNGDefParseXML)
(virDomainMemballoonDefParseXML, virDomainNVRAMDefParseXML)
(virSysinfoParseXML, virDomainVideoAccelDefParseXML)
(virDomainVideoDefParseXML, virDomainHostdevDefParseXML)
(virDomainRedirdevDefParseXML)
(virDomainRedirFilterUsbDevDefParseXML)
(virDomainRedirFilterDefParseXML, virDomainIdMapEntrySort)
(virDomainIdmapDefParseXML, virDomainVcpuPinDefParseXML)
(virDiskNameToBusDeviceIndex, virDomainDeviceDefCopy)
(virDomainVideoDefaultType, virDomainHostdevAssignAddress)
(virDomainDeviceDefPostParseInternal, virDomainDeviceDefPostParse)
(virDomainChrGetDomainPtrs, virDomainControllerSCSINextUnit)
(virDomainSCSIDriveAddressIsUsed)
(virDomainDriveAddressIsUsedByDisk)
(virDomainDriveAddressIsUsedByHostdev): Fix fallout.
* src/openvz/openvz_driver.c (openvzDomainDeviceDefPostParse):
Likewise.
* src/libxl/libxl_domain.c (libxlDomainDeviceDefPostParse):
Likewise.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse)
(qemuDomainDefaultNetModel): Likewise.
* src/lxc/lxc_domain.c (virLXCDomainDeviceDefPostParse):
Likewise.
* src/uml/uml_driver.c (umlDomainDeviceDefPostParse): Likewise.
* src/xen/xen_driver.c (xenDomainDeviceDefPostParse): Split...
(xenDomainDefPostParse): ...since per-device callback is not the
time to be adding a device.
Signed-off-by: Eric Blake <eblake@redhat.com>
virDomainChrGetDomainPtrs() required 4 levels of pointers (taking
a parameter that will be used as an output variable to return the
address of another variable that contains an array of pointers).
This is rather complex to reason about, especially when outside
of the domain_conf file, no other caller should be modifying
the resulting array of pointers directly. Changing the public
signature gives something is easier to reason with, and actually
make const-correct; which is important as it was the only function
that was blocking virDomainDeviceDefCopy from treating its source
as const.
* src/conf/domain_conf.h (virDomainChrGetDomainPtrs): Use simpler
types, and make const-correct for external users.
* src/conf/domain_conf.c (virDomainChrGetDomainPtrs): Split...
(virDomainChrGetDomainPtrsInternal): ...into an internal version
that lets us modify terms, vs. external form that is read-only.
(virDomainDeviceDefPostParseInternal, virDomainChrFind)
(virDomainChrInsert): Adjust callers.
* src/qemu/qemu_command.c (qemuGetNextChrDevIndex): Adjust caller.
(qemuDomainDeviceAliasIndex): Make const-correct.
Signed-off-by: Eric Blake <eblake@redhat.com>
Prefer using VFIO (if available) to the legacy KVM device passthrough.
With this patch a PCI passthrough device without the driver configured
will be started with VFIO if it's available on the host. If not legacy
KVM passthrough is checked and error is reported if it's not available.
Since 76b644c when the support for RAM filesystems was introduced,
libvirt accepted the following XML:
<source usage='1024' unit='KiB'/>
This was parsed correctly and internally stored in bytes, but it
was formatted as (with an extra 's'):
<source usage='1024' units='KiB'/>
When read again, this was treated as if the units were missing,
meaning libvirt was unable to parse its own XML correctly.
The usage attribute was documented as being in KiB, but it was not
scaled if the unit was missing. Transient domains still worked,
because this was balanced by an extra 'k' in the mount options.
This patch:
Changes the parser to use 'units' instead of 'unit', as the latter
was never documented (fixing persistent domains) and some programs
(libvirt-glib, libvirt-sandbox) already parse the 'units' attribute.
Removes the extra 'k' from the tmpfs mount options, which is needed
because now we parse our own XML correctly.
Changes the default input unit to KiB to match documentation, fixing:
https://bugzilla.redhat.com/show_bug.cgi?id=1015689
This resolves one of the issues in:
https://bugzilla.redhat.com/show_bug.cgi?id=1003983
This device is identical to qemu's "intel-hda" device (known as "ich6"
in libvirt), but has a different PCI device ID (which matches the ID
of the hda audio built into the ich9 chipset, of course). It's not
supported in earlier versions of qemu, so it requires a capability
bit.
The parsing of '-usb' did not check for failure of the
virDomainControllerInsert method. As a result on OOM, the
parser mistakenly attached USB disks to the IDE controller.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
qemu/KVM also supports a tftp URL while specifying the cdrom ISO image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='tftp' name='/url/path'>
<host name='host.name' port='69'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
The ftps protocol is another protocol supported by qemu/KVM while specifying
the cdrom ISO image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='ftps' name='/url/path'>
<host name='host.name' port='990'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
The https protocol is also accepted by qemu/KVM when specifying the cdrom ISO
image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='https' name='/url/path'>
<host name='host.name' port='443'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
The function implemented common behavior that can be reused for other
hypervisor drivers that use the virDomainObj data structures. Factor out
the core into a separate helper func.
The function implemented common behavior that can be reused for other
hypervisor drivers that use the virDomainObj data structures. Factor out
the core into a separate helper func.
Starting with qemu 1.6, the qemu-system-arm vexpress-a9 model has a
hardcoded virtio-mmio transport which enables attaching all virtio
devices.
On the command line, we have to use virtio-XXX-device rather than
virtio-XXX-pci, thankfully s390 already set the precedent here so
it's fairly straight forward.
At the XML level, this adds a new device address type virtio-mmio.
The controller and addressing don't have any subelements at the
moment because we they aren't needed for this usecase, but could
be added later if needed.
Add a test case for an ARM guest with one of every virtio device
enabled.
This corresponds to '-sd' and '-drive if=sd' on the qemu command line.
Needed for many ARM boards which don't provide any other way to
pass in storage.
Add an attribute named 'removable' to the 'target' element of disks,
which controls the removable flag. For instance, on a Linux guest it
controls the value of /sys/block/$dev/removable. This option is only
valid for USB disks (i.e. bus='usb'), and its default value is 'off',
which is the same behaviour as before.
To achieve this, 'removable=on' (or 'off') is appended to the '-device
usb-storage' parameter sent to qemu when adding a USB disk via
'-disk'. A capability flag QEMU_CAPS_USB_STORAGE_REMOVABLE was added
to keep track if this option is supported by the qemu version used.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=922495
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When using a <interface type="network"> that points to a network with
hostdev forwarding mode a hostdev alias is created for the network. This
allias is inserted into the hostdev list, but is backed with a part of
the network object that it is connected to.
When a VM is being stopped qemuProcessStop() calls
networkReleaseActualDevice() which eventually frees the memory for the
hostdev object. Afterwards when the domain definition is being freed by
virDomainDefFree() an invalid pointer is accessed by
virDomainHostdevDefFree() and may cause a crash of the daemon.
This patch removes the entry in the hostdev list before freeing the
depending memory to avoid this issue.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1000973
<controller type='pci' index='0' model='pci-root'>
<pcihole64 unit='KiB'>1048576</pcihole64>
</controller>
It can be used to adjust (or disable) the size of the 64-bit
PCI hole. The size attribute is in kilobytes (different unit
can be specified on input), but it gets rounded up to
the nearest GB by QEMU.
Disabling it will be needed for guests that crash with the
64-bit PCI hole (like Windows XP), see:
https://bugzilla.redhat.com/show_bug.cgi?id=990418
The ftp protocol is already recognized by qemu/KVM so add this support to
libvirt as well.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='ftp' name='/url/path'>
<host name='host.name' port='21'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
QEMU/KVM already allows a HTTP URL for the cdrom ISO image so add this support
to libvirt as well.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='http' name='/url/path'>
<host name='host.name' port='80'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=924153
Commit 904e05a2 (v0.9.9) added a per-<disk> seclabel element with
an attribute relabel='no' in order to try and minimize the
impact of shutdown delays when an NFS server disappears. The idea
was that if a disk is on NFS and can't be labeled in the first
place, there is no need to attempt the (no-op) relabel on domain
shutdown. Unfortunately, the way this was implemented was by
modifying the domain XML so that the optimization would survive
libvirtd restart, but in a way that is indistinguishable from an
explicit user setting. Furthermore, once the setting is turned
on, libvirt avoids attempts at labeling, even for operations like
snapshot or blockcopy where the chain is being extended or pivoted
onto non-NFS, where SELinux labeling is once again possible. As
a result, it was impossible to do a blockcopy to pivot from an
NFS image file onto a local file.
The solution is to separate the semantics of a chain that must
not be labeled (which the user can set even on persistent domains)
vs. the optimization of not attempting a relabel on cleanup (a
live-only annotation), and using only the user's explicit notation
rather than the optimization as the decision on whether to skip
a label attempt in the first place. When upgrading an older
libvirtd to a newer, an NFS volume will still attempt the relabel;
but as the avoidance of a relabel was only an optimization, this
shouldn't cause any problems.
In the ideal future, libvirt will eventually have XML describing
EVERY file in the backing chain, with each file having a separate
<seclabel> element. At that point, libvirt will be able to track
more closely which files need a relabel attempt at shutdown. But
until we reach that point, the single <seclabel> for the entire
<disk> chain is treated as a hint - when a chain has only one
file, then we know it is accurate; but if the chain has more than
one file, we have to attempt relabel in spite of the attribute,
in case part of the chain is local and SELinux mattered for that
portion of the chain.
* src/conf/domain_conf.h (_virSecurityDeviceLabelDef): Add new
member.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML):
Parse it, for live images only.
(virSecurityDeviceLabelDefFormat): Output it.
(virDomainDiskDefParseXML, virDomainChrSourceDefParseXML)
(virDomainDiskSourceDefFormat, virDomainChrDefFormat)
(virDomainDiskDefFormat): Pass flags on through.
* src/security/security_selinux.c
(virSecuritySELinuxRestoreSecurityImageLabelInt): Honor labelskip
when possible.
(virSecuritySELinuxSetSecurityFileLabel): Set labelskip, not
norelabel, if labeling fails.
(virSecuritySELinuxSetFileconHelper): Fix indentation.
* docs/formatdomain.html.in (seclabel): Document new xml.
* docs/schemas/domaincommon.rng (devSeclabel): Allow it in RNG.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.xml:
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*-labelskip.args:
* tests/qemuxml2xmloutdata/qemuxml2xmlout-seclabel-*-labelskip.xml:
New test files.
* tests/qemuxml2argvtest.c (mymain): Run the new tests.
* tests/qemuxml2xmltest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
This PCI controller, named "dmi-to-pci-bridge" in the libvirt config,
and implemented with qemu's "i82801b11-bridge" device, connects to a
PCI Express slot (e.g. one of the slots provided by the pcie-root
controller, aka "pcie.0" on the qemu commandline), and provides 31
*non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31.
Any time a machine is defined which has a pcie-root controller
(i.e. any q35-based machinetype), libvirt will automatically add a
dmi-to-pci-bridge controller if one doesn't exist, and also add a
pci-bridge controller. The reasoning here is that any useful domain
will have either an immediate (startup time) or eventual (subsequent
hot-plug) need for a standard PCI slot; since the pcie-root controller
only provides PCIe slots, we need to connect a dmi-to-pci-bridge
controller to it in order to get a non-hot-plug PCI slot that we can
then use to connect a pci-bridge - the slots provided by the
pci-bridge will be both standard PCI and hot-pluggable.
Since pci-bridge devices themselves can not be hot-plugged into a
running system (although you can hot-plug other devices into a
pci-bridge's slots), any new pci-bridge controller that is added can
(and will) be plugged into the dmi-to-pci-bridge as long as it has
empty slots available.
This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST"
to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit
the automatically added dmi-to-pci-bridge and pci-bridge devices, and
the "after" xml can include it - this way we are testing if libvirt is
properly adding these devices.
This controller is implicit on q35 machinetypes. It provides 31 PCIe
(*not* PCI) slots as controller 0.
Currently there are no devices that can connect to pcie-root, and no
implicit pci controller on a q35 machine, so q35 is still
unusable. For a usable q35 system, we need to add a
"dmi-to-pci-bridge" pci controller, which can connect to pcie-root,
and provides standard pci slots that can be used to connect other
devices.
Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports
all share the same namespace, they are all defined as controllers of
type='pci' in libvirt (but with a differing model attribute). Each of
these controllers has a certain connection type upstream, allows
certain connection types downstream, and each can either allow a
single downstream connection at slot 0, or connections from slot 1 -
31.
Right now, we only support the pci-root and pci-bridge devices, both
of which only allow PCI devices to connect, and both which have usable
slots 1 - 31. In preparation for adding other types of controllers
that have different capabilities, this patch 1) adds info to the
qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets
those capabilities appropriately for pci-root and pci-bridge devices,
and 3) validates that the controller being connected to is the proper
type when allocating slots or validating that a user-selected slot is
appropriate for a device..
Having this infrastructure in place will make it much easier to add
support for the other PCI controller types.
While it would be possible to do all the necessary checking by just
storing the controller model in the qemyuDomainPCIAddressBus, it
greatly simplifies all the validation code to also keep a "flags",
"minSlot" and "maxSlot" for each - that way we can just check those
attributes rather than requiring a nearly identical switch statement
everywhere we need to validate compatibility.
You may notice many places where the flags are seemingly hard-coded to
QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI
This is currently the correct value for all PCI devices, and in the
future will be the default, with small bits of code added to change to
the flags for the few devices which are the exceptions to this rule.
Finally, there are a few places with "FIXME" comments. Note that these
aren't indicating places that are broken according to the currently
supported devices, they are places that will need fixing when support
for new PCI controller models is added.
To assure that there was no regression in the auto-allocation of PCI
addresses or auto-creation of integrated pci-root, ide, and usb
controllers, a new test case (pci-bridge-many-disks) has been added to
both the qemuxml2argv and qemuxml2xml tests. This new test defines a
domain with several dozen virtio disks but no pci-root or
pci-bridges. The .args file of the new test case was created using
libvirt sources from before this patch, and the test still passes
after this patch has been applied.
The difference with already supported pool types (dir, fs, block)
is: there are two modes for iscsi pool (or network pools in future),
one can specify it either to use the volume target path (the path
showed up on host) with mode='host', or to use the remote URI qemu
supports (e.g. file=iscsi://example.org:6000/iqn.1992-01.com.example/1)
with mode='direct'.
For 'host' mode, it copies the volume target path into disk->src. For
'direct' mode, the corresponding info in the *one* pool source host def
is copied to disk->hosts[0].
There are two ways to use a iSCSI LUN as disk source for qemu.
* The LUN's path as it shows up on host, e.g.
/dev/disk/by-path/ip-$ip:3260-iscsi-$iqn-fc18:iscsi.iscsi0-lun-1
* The libiscsi URI from the storage pool source element host attribute, e.g.
iscsi://demo.org:6000/iqn.1992-01.com.example/1
For a "volume" type disk, if the specified "pool" is of iscsi
type, we should support to use the LUN in either of above 2 ways.
That's why to introduce a new XML tag "mode" for the disk source
(libvirt should support iscsi pool with libiscsi, but it's another
new feature, which should be done later).
The "mode" can be either of "host" or "direct". Use "host" to indicate
use of the LUN with the path as it shows up on host. Use "direct" to
indicate to use it with the source pool host URI (future patches may support
to use network type libvirt storage too, e.g. Ceph)
There are two levels on which a device may be hotplugged: config
and live. The config level requires just an insert or remove from
internal domain definition structure, which is exactly what this
patch does. There is currently no implementation for a chardev
update action, as there's not much to be updated. But more
importantly, the only thing that can be updated is path or socket
address by which chardevs are distinguished. So the update action
is currently not supported.
For now, only these three helpers are needed:
virDomainChrFind - to find a duplicate chardev within VM def
virDomainChrInsert - wrapper for inserting a new chardev into VM def
virDomainChrRemove - wrapper for removing chardev from VM def
There is, however, one internal helper as well:
virDomainChrGetDomainPtrs which sets given pointers to one of
vmdef->{parallels,serials,consoles,channels} based on passed
chardev type.
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
While iterating with virDomainObjListForEach it is safe to remove
current element. But while iterating, 'doms' lock is already taken, so
can't use standard virDomainObjListRemove. So introduce
virDomainObjListRemoveLocked for this purpose.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
This patch introduces new element <idmap> for
user namespace. for example
<idmap>
<uid start='0' target='1000' count='10'/>
<gid start='0' target='1000' count='10'/>
</idmap>
this new element is used for setting proc files
/proc/<pid>/{uid_map,gid_map}.
This patch also supports multiple uid/gid elements
setting in XML configuration.
We don't support the semi configuation, user has to
configure uid and gid both.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Add new CPU features for HyperV:
vapic for virtual APIC support
spinlocks for setting spinlock support
<features>
<hyperv>
<vapic state='on'/>
<spinlocks state='on' retries='4096'/>
</hyperv>
</features>
https://bugzilla.redhat.com/show_bug.cgi?id=784836
https://bugzilla.redhat.com/show_bug.cgi?id=971485
As of d7f9d82753 we copy the listen
address from the qemu.conf config file in case none has been provided
via XML. But later, when migrating, we should not include such listen
address in the migratable XML as it is something autogenerated, not
requested by user. Moreover, the binding to the listen address will
likely fail, unless the address is '0.0.0.0' or its IPv6 equivalent.
This patch introduces a new boolean attribute to virDomainGraphicsListenDef
to distinguish autofilled listen addresses. However, we must keep the
attribute over libvirtd restarts, so it must be kept within status XML.
https://bugzilla.redhat.com/show_bug.cgi?id=964177
Though both libvirt and QEMU's document say RTC_CHANGE returns
the offset from the host UTC, qemu actually returns the offset
from the specified date instead when specific date is provided
(-rtc base=$date).
It's not safe for qemu to fix it in code, it worked like that
for 3 years, changing it now may break other QEMU use cases.
What qemu tries to do is to fix the document:
http://lists.gnu.org/archive/html/qemu-devel/2013-05/msg04782.html
And in libvirt side, instead of replying on the value from qemu,
this converts the offset returned from qemu to the offset from
host UTC, by:
/*
* a: the offset from qemu RTC_CHANGE event
* b: The specified date (-rtc base=$date)
* c: the host date when libvirt gets the RTC_CHANGE event
* offset: What libvirt will report
*/
offset = a + (b - c);
The specified date (-rtc base=$date) is recorded in clock's def as
an internal only member (may be useful to exposed outside?).
Internal only XML tag "basetime" is introduced to not lose the
guest's basetime after libvirt restarting/reloading:
<clock offset='variable' adjustment='304' basis='utc' basetime='1370423588'/>
This attribute is going to represent number of queues for
multique vhost network interface. This commit implements XML
extension part of the feature and add one test as well. For now,
we can only do xml2xml test as qemu command line generation code
is not adapted yet.
-vnc :5900,share=allow-exclusive
allows clients to ask for exclusive access which is
implemented by dropping other connections Connecting
multiple clients in parallel requires all clients asking
for a shared session (vncviewer: -shared switch)
-vnc :5900,share=force-shared
disables exclusive client access. Useful for shared
desktop sessions, where you don't want someone forgetting
specify -shared disconnect everybody else.
-vnc :5900,share=ignore
completely ignores the shared flag and allows everybody
connect unconditionally
