Since 5084091a, @tmp is filled by a g_key_file_get_string which is
now an allocated string as opposed to some hash table lookup value,
so we need to treat it as so.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'uri_out' may be passed to VIR_FREE uninitialized if 'conn' is NULL.
Unfortunately the compiler isn't able to detect this problem when
VIR_FREE is implemented using g_clear_pointer. Initialize the variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com
When a system has enabled the iptables/ip6tables services rather than
firewalld, there is no explicit ordering of the start of those
services vs. libvirtd. This creates a problem when libvirtd.service is
started before ip[6]tables, as the latter, when it finally is started,
will remove all of the iptables rules that had previously been added
by libvirt, including the custom chains where libvirt's rules are
kept. This results in an error message similar to the following when a
user subsequently tries to start a new libvirt network:
"Error while activating network: Call to virNetworkCreate failed:
internal error: Failed to apply firewall rules
/usr/sbin/ip6tables -w --table filter --insert LIBVIRT_FWO \
--in-interface virbr2 --jump REJECT:
ip6tables: No chain/target/match by that name."
(Prior to logging this error, it also would have caused failure to
forward (or block) traffic in some cases, e.g. for guests on a NATed
network, since libvirt's rules to forward/block had all been deleted
and libvirt didn't know about it, so it couldn't fix the problem)
When this happens, the problem can be remedied by simply restarting
libvirtd.service (which has the side-effect of reloading all
libvirt-generated firewall rules)
Instead, we can just explicitly stating in the libvirtd.service file
that libvirtd.service should start after ip6tables.service and
ip6tables.service, eliminating the race condition that leads to the
error.
There is also nothing (that I can see) in the systemd .service files
to guarantee that firewalld.service will be started (if enabled) prior
to libvirtd.service. The same error scenario given above would occur
if libvirtd.service started before firewalld.service. Even before
that, though libvirtd would have detected that firewalld.service was
disabled, and then turn off all firewalld support. So, for example,
firewalld's libvirt zone wouldn't be used, and most likely traffic
from guests would therefore be blocked (all with no external
indication of the source of the problem other than a debug-level log
when libvirtd was started saying that firewalld wasn't in use); also
libvirtd wouldn't notice when firewalld reloaded its rules (which also
simultaneously deletes all of libvirt's rules).
I'm not aware of any reports that have been traced back to
libvirtd.service starting before firewalld.service, but have seen that
error reported multiple times, and also don't see an existing
dependency that would guarantee firewalld.service starts before
libvirtd.service, so it's possible it's been happening and we just
haven't gotten to the bottom of it.
This patch adds an After= line to the libvirtd.service file for each
of iptables.service, ip6tables.service, and firewalld.servicee, which
should guarantee that libvirtd.service isn't started until systemd has
started whichever of the others is enabled.
This race was diagnosed, and patch proposed, by Jason Montleon in
https://bugzilla.redhat.com/1723698 . At the time (April 2019) danpb
agreed with him that this change to libvirtd.service was a reasonable
thing to do, but I guess everyone thought someone else was going to
post a patch, so in the end nobody did.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virConnectGetType() returns "Xen" for libxl, not "LIBXL".
This prevents users opening a connection to the libxl driver when using
the modular daemons.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In a few places we use 0 and false, or 1 and true interchangeably
even though the variable or return type in question is boolean.
Fix those places.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
String typed parameter values were introduced in v0.9.7-30-g40624d32fb.
virDomainGetJobStats was introduced in v1.0.2-239-g4dd00f4238 so all
clients already support typed parameter stings at that time thus we can
enable it unconditionally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When the comment in libvirtd.sasl was last updated with
commit fe772f24a6
Author: Cole Robinson <crobinso@redhat.com>
Date: Sat Oct 20 14:10:03 2012 -0400
daemon: Avoid 'Could not find keytab file' in syslog
it was noted that only old versions of kerberos would need the
environment variable to be set: that was more than seven years
ago, so it's safe to assume that none of our current target
platforms still requires that hack and setting the appropriate
key in the configuration file will be enough.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This follows the example set by libvirtd, and makes it easier for
the admin to tweak the timeout or disable it altogether.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While not terribly useful in general, tweaking each daemon's
timeout (or disabling it off altogether) is a valid use case which
we can very easily support while being consistent with what already
happens for libvirtd. This is a first step in that direction.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When using systemd we want to take advantage of socket activation
instead of keeping daemons running all the time, so we default to
shutting them down after two minutes of inactivity.
At the same time, we want it to be possible for the admin to opt
out of this behavior and disable timeouts entirely. A very natural
way to do so would be to specify a zero-length timeout, but that's
currently not accepted by the command line parser. Address that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The node device APIs are a little unusual because we don't use a
"remote_nonnull_node_device" object on the wire, instead we just
have a "remote_string" for the device name. This meant dispatcher
code generation needed special cases. In doing so we mistakenly
used the virNodeDeviceLookupByName() API which gets dispatched
into the driver, instead of get_nonnull_node_device() which
directly populates a virNodeDevicePtr object.
This wasn't a problem with monolithic libvirtd, as the
virNodeDeviceLookupByName() API call was trivially satisfied
by the registered driver, albeit with an extra (undesirable)
authentication check. With the split daemons, the call to
virNodeDeviceLookupByName() fails in virtqemud, because the
node device driver obviously doesn't exist in that daemon.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Historically threads are given a name based on the C function,
and this name is just used inside libvirt. With OS level thread
naming this name is now visible to debuggers, but also has to
fit in 15 characters on Linux, so function names are too long
in some cases.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The default memlock limit is 64k which is not enough to start a single
VM. The requirements for one VM are 12k, 8k for eBPF map and 4k for eBPF
program, however, it fails to create eBPF map and program with 64k limit.
By testing I figured out that the minimal limit is 80k to start a single
VM with functional eBPF and if I add 12k I can start another one.
This leads into following calculation:
80k as memlock limit worked to start a VM with eBPF which means there
is 68k of lock memory that I was not able to figure out what was using
it. So to get a number for 4096 VMs:
68 + 12 * 4096 = 49220
If we round it up we will get 64M of memory lock limit to support 4096
VMs with default map size which can hold 64 entries for devices.
This should be good enough as a sane default and users can change it if
the need to.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1807090
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This deletes all trace of gnulib from libvirt. We still
have the keycodemapdb submodule to deal with. The simple
solution taken was to update it when running autogen.sh.
Previously gnulib could auto-trigger refresh when running
'make' too. We could figure out a solution for this, but
with the pending meson rewrite it isn't worth worrying
about, given how infrequently keycodemapdb changes.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This lets it generate the remote dispatch for StorageVolGetInfoFlags.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This addreses portability to Windows and standardizes
error reporting. This fixes a number of places which
failed to set O_CLOEXEC or failed to report errors.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Most code now uses the virProcess / virCommand APIs, so
the need for sys/wait.h is quite limited. Removing this
include removes the dependency on GNULIB providing a
dummy sys/wait.h for Windows.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are a large number of different header files that
are related to the sockets APIs. The virsocket.h header
includes all of the relevant headers for Windows and UNIX
in one convenient place. If virsocketaddr.h is already
included, then there's no need for virsocket.h
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The intent here is to allow the virt drivers to be run directly embedded
in an arbitrary process without interfering with libvirtd. To achieve
this they need to store all their configuration & state in a separate
directory tree from the main system or session libvirtd instances.
This can be useful for doing testing of the virt drivers in "make check"
without interfering with the user's own libvirtd instances.
It can also be used for applications using KVM/QEMU as a piece of
infrastructure to build an service, rather than for general purpose
OS hosting. A long standing example is libguestfs, which would prefer
if its temporary VMs did show up in the main libvirtd VM list, because
this confuses apps such as OpenStack Nova. A more recent example would
be Kata which is using KVM as a technology to build containers.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since commit <60d9ad6f1e42618fce10baeb0f02c35e5ebd5b24> we require
GnuTLS and since commit <ac0d21c762351f58dd5d2dafa2014ed48a8b49f3>
we can actually drop the usage of WITH_GNUTLS.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
G_STATIC_ASSERT() is a drop-in functional equivalent of
the GNULIB verify() macro.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The GLib g_size_checked_mul() function is not quite the
same signature, and gives compiler warnings due to not
correctly casting from gsize to guint64/32. Implementing
a replacement for INT_MULTIPLY_OVERFLOW is easy enough
to do ourselves.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is a lots of possibilities to retrieve hostname information
from domain. Libvirt could use lease information from dnsmasq to
get current hostname too. QEMU supports QEMU-agent but it can use
lease source.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This is not strictly needed, but it makes sure we initialize the
@bootTime global variable. Thing is, in order to validate XATTRs
and prune those set in some previous runs of the host, a
timestamp is recorded in XATTRs. The host boot time was unique
enough so it was chosen as the timestamp value. And to avoid
querying and parsing /proc/uptime every time, the query function
does that only once and stores the boot time in a global
variable. However, the only time the query function is called is
in a child process that does lock files and changes seclabels. So
effectively, we are doing exactly what we wanted to prevent from
happening.
The fix is simple, call the virHostBootTimeInit() function which
sets the global variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The g_pattern_match function_simple is an acceptably close
approximation of fnmatch for libvirt's needs.
In contrast to fnmatch(), the '/' character can be matched
by the wildcards, there are no '[...]' character ranges and
'*' and '?' can not be escaped to include them literally in
a pattern.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
virGetUserRuntimeDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virGetUserConfigDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The intent of get_nonnull_domain() is not to validate virDomain
as sent by the client but just to construct the virDomain
structure. The validation is then done in each API when looking
up the domain in our internal hash tables.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There is plenty of distributions that haven't switched to
systemd nor they force their users to (Gentoo, Alpine Linux to
name a few). With the daemon split merged their only option is to
still use the monolithic daemon which will go away eventually.
Provide init scripts for these distros too.
For now, I'm not introducing config files which would correspond
to the init files except for libvirtd and virtproxyd init scripts
where it might be desirable to tweak the command line of
corresponding daemons.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
To free the structs and save the error, it is not necessary to hold @priv->lock,
therefore move these parts after the mutex unlock.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
As a result, you can later determine during the callback which program
was used. This makes it easier to refactor the code in the future and
is less prone to error.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This one is fairly straightforward - the generator already does what
we need.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In v5.9.0-273-g8ecab214de I've tried to fix a lock ordering
problem, but introduced a crasher. Problem is that because the
client lock is unlocked (in order to honour lock ordering) the
stream we are currently checking in daemonStreamFilter() might be
freed and thus stream->priv might not even exist when the control
get to virMutexLock() call.
To resolve this, grab an extra reference to the stream and handle
its cleanup should the refcounter reach zero after the deref.
If that's the case and we are the only ones holding a reference
to the stream, we MUST return a positive value to make
virNetServerClientDispatchRead() break its loop where it iterates
over filters. The problem is, if we did not do so, then
"filter = filter->next" line will read from a memory that was
just freed (freeing a stream also unregisters its filter).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When dispatching a message read from client it is first passed
through registered filters. If one of the filters consumes the
message no further processing of the message is done. However,
the filter callbacks are called with the client object locked.
This breaks lock ordering in case of virStream filter, we always
acquire stream private data lock without the client object
locked. In other words, the daemonStreamFilter() does not follow
the lock ordering.
Signed-off-by: LanceLiu <liu.lance.89@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some layered products such as oVirt have requested a way to avoid being
blocked by guest agent commands when querying a loaded vm. For example,
many guest agent commands are polled periodically to monitor changes,
and rather than blocking the calling process, they'd prefer to simply
time out when an agent query is taking too long.
This patch adds a way for the user to specify a custom agent timeout
that is applied to all agent commands.
One special case to note here is the 'guest-sync' command. 'guest-sync'
is issued internally prior to calling any other command. (For example,
when libvirt wants to call 'guest-get-fsinfo', we first call
'guest-sync' and then call 'guest-get-fsinfo').
Previously, the 'guest-sync' command used a 5-second timeout
(VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT), whereas the actual command that
followed always blocked indefinitely
(VIR_DOMAIN_QEMU_AGENT_COMMAND_BLOCK). As part of this patch, if a
custom timeout is specified that is shorter than
5 seconds, this new timeout is also used for 'guest-sync'. If there is
no custom timeout or if the custom timeout is longer than 5 seconds, we
will continue to use the 5-second timeout.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the usage of
VIR_STRNDUP(dest, b, p ? p - b : -1)
with separate calls to g_strndup/g_strdup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Previously we generated all source files into $srcdir which is no
longer true. This means that we can't just blindly prepend each
source file with $srcdir.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When RUNSTATEDIR was introduced
commit d29c917ef4
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Aug 20 16:05:12 2019 +0100
src: honour the RUNSTATEDIR variable in all code
The makefile rules for man pages were accidentally not updated for the
new variablle name.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
