All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v4.0.0-rc0~202^2~3 the
query-current-machine command is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.12.0-rc0~48^2~25 the
qom-list-properties command is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.6.0-rc0~74^2~6 the
DUMP_COMPLETED event is always available for all QEMU versions we
support (4.2.0, currently). Therefore, we can assume the
capability is always set and thus doesn't need to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, before sending any guest agent command we would
send 'guest-sync' command to make guest agent reset its internal
state and flush any partially read command (json). This was
because there was no event emitted when the agent
(dis-)connected.
But now that we have the event we can execute the sync command
just once - the first time after we've connected. Should agent
disconnect in the middle of reading a command, and then connect
back again we would get the event and disconnect and connect back
again, resulting in the sync command being executed again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.1.0-rc0~18^2~2 the
VSERPORT_CHANGE event is always available for all QEMU versions
we support (4.2.0, currently). Therefore, we can assume the
capability is always set and thus doesn't need to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v3.0.0-rc0~124^2~1 the
set-numa-node command is always available for all QEMU versions
we support (4.2.0, currently). Therefore, we can assume the
capability is always set and thus doesn't need to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuAgent has option to issue guest-sync command before each
intended command or issue the sync commend just once, right after
the socket is opened and before the first intended command is
issued. The latter is referred to as single sync agent and is
enabled by VSERPORT_CHANGED event which allows us to detect
when the agent (dis-)connects in the guest.
Now, every QEMU that we support (4.2.0 or newer) has the event
and thus will use single sync agent. Therefore, adjust
qemuagenttest to make it test what's used in the real world,
rather than old approach.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuDomainQueryWakeupSuspendSupport() does not change state
of the domain as it just runs 'query-current-machine' QMP
command. Therefore, there's no need for it to acquire MODIFY job,
QUERY job is perfectly okay.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The was an attempt to document the retvals for
qemuDomainQueryWakeupSuspendSupport(). However, it's misleading
because in reality, the function can return nothing but 0 or -1,
but the comment implies retval of 1 too.
Since the set of possible return values complies with our
unwritten rule (0 for success, -1 for error), there's no real
value in having the comment and as such can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The libvirt-daemon subpackage contains libvirt-guests.sh script (used by
libvirt-guests service), which requires virsh to actually work. But
since dynamic libraries were separated from libvirt-client to
libvirt-libs more than 6 years ago, libvirt-daemon no longer requires
virsh to be installed. So unless libvirt-client is explicitly installed
(either manually or by installing the libvirt meta package),
libvirt-guests will not work.
Just adding libvirt-client as a dependency of libvirt-daemon would go
against the original idea behind splitting libvirt-client: users may not
want to install or use any client binaries on the host where the daemon
runs (either they just use various language bindings or access the
daemon remotely). To solve this we could possibly turn libvirt-daemon
into an empty package and separate the daemons and libvirt-guests into
subpackages to make sure we support both use cases, but marking
libvirt-client as Recommended for libvirt-daemon does the same job in a
much simpler way.
https://bugzilla.redhat.com/show_bug.cgi?id=2136591
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The high-bandwidth memory (HBM) in cache mode might be greater than
UINT_MAX of cache per NUMA node, so change to unsigned long long.
Signed-off-by: Lin Yang <lin.a.yang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically, we had no idea whether the qemu-ga running inside
the guest was running or not. Or whether it crashed in the middle
of reading of a command. That's why we issued guest-sync prior
any intended command, to make the agent flush any partially read
JSON and reset its state machine.
But with VSERPORT_CHANGE event we know when the guest agent
(dis-)connects and thus can issue the sync command just once for
each 'connection'. Whether the agent is synced is tracked in
agent->inSync member, which used to be set to true upon
successful sync. But after rework in v8.0.0-rc1~361 that line is
gone, leaving us with using the historic approach basically.
Fixes: cad84fd51e
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As some qemxml2argvtest cases were removed, we forgot to remove
their expected output counterparts.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The privatedata.rng file was accidentally left uninstalled, but it's
referenced by other schema files effectively breaking validation of XMLs
in new installations.
Change to libvirt.spec is not needed as we include all installed schemas
via a wildcard.
Fixes: d8ceacdc87
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Prior to firewalld version 1.0.0, the default action of ACCEPT in the
"libvirt" zone (subsequently overridden with a lower priority "REJECT"
action) would result in an implicit rule that allowed incoming sessions
through the zone; libvirt relied on this implicit rule to permit
incoming connections to guests that were connected via a libvirt
"routed" network.
Starting in firewalld 1.0.0, the rules generated for this same
zonefile changed such that incoming sessions through the libvirt zone
were no longer allowed, breaking the longstanding convention that they
should be allowed (only for routed networks).
However, beginning with firewalld 0.9.0, a zone can explicitly
allow/block forwarded traffic (by adding a "policy" to the zone that
specifies what happens to packets that are going in one zone and out
another zone).
This patch changes the zone for routed networks from "libvirt" to the
newly-added "libvirt-routed" zone that uses the new policy
functionality to once again allow incoming sessions to guests on
routed networks.
(If firewalld is < 0.9.0, then the policy file won't be read at all,
so firewalld won't log any error, and libvirt will just use the old
setup that takes advantage of the implicit forwarding rules).
Resolves: https://bugzilla.redhat.com/2055706
Signed-off-by: Eric Garver <eric@garver.life>
Reviewed-by: Laine Stump <laine@redhat.com>
This zone will be used for the routed network by default.
Note that this zone definition omits "forward" aka intra-zone
forwarding, because it requires firewalld >= 0.9.0.
Signed-off-by: Eric Garver <eric@garver.life>
Reviewed-by: Laine Stump <laine@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.12.0-rc0~148^2~4 the .align
attribute of memory-backend-file is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.11.0-rc0~95^2~9 the .discard
attribute of memory-backend-file is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.1.0-rc0~41^2~26 only for Linux,
and later in v3.1.0-rc0~71^2~10 for all POSIX, the
memory-backend-file is going to be present for all QEMU versions
we support (4.2.0, currently). Therefore, we can assume the
capability is always set and thus doesn't need to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.1.0-rc0~41^2~104 the
memory-backend-ram is going to be present for all QEMU versions
we support (4.2.0, currently). Therefore, we can assume the
capability is always set and thus doesn't need to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of this test case it to make sure we error out when
QEMU_CAPS_OBJECT_MEMORY_RAM is missing. Well, it's never going to
be missing. Drop the test case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, we have maybe a dozen tests for hugepages related stuff in
qemuxml2xmltest. In all cases DO_TEST() is used, which means we have to
enumerate all capabilities needed (though, it's usually just
QEMU_CAPS_OBJECT_MEMORY_RAM and QEMU_CAPS_OBJECT_MEMORY_FILE,
exceptionally QEMU_CAPS_DEVICE_PC_DIMM too).
Instead of deleting the caps flags one-by-one, just switch the
tests to use DO_CAPS_LATEST().
Since some of our expected output files are just a symlink to their
respective input files, these are changed too. But from QEMU's
POV nothing changes as no .args file is changed.
Oh, and I'm also adding a 'hugepages-memaccess3' test case, which
was missing, surprisingly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, we have maybe a dozen tests for hugepages related
stuff in qemuxml2argvtest. In all cases DO_TEST() is used, which
means we have to enumerate all capabilities needed (though, it's
usually just QEMU_CAPS_OBJECT_MEMORY_RAM and
QEMU_CAPS_OBJECT_MEMORY_FILE, exceptionally
QEMU_CAPS_OBJECT_MEMORY_FILE_DISCARD too).
Instead of deleting the caps flags one-by-one, just switch the
tests to use DO_CAPS_LATEST().
The qemuxml2xmltest will undergo similar treatment in next
commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
AMX was introduced in QEMU commit 1f16764f7d4515bfd5e4ae0aae814fa280a7d0c8.
Signed-off-by: Lin Yang <lin.a.yang@intel.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The g_slist_free_full() function is perfectly capable of handling
NULL (in which case it's NOP), therefore there's no need to check
passed pointers for NULL. We have them though in couple of
places. Drop them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Glib can internally convert only unix timestamps up to
9999-12-31T23:59:59 (253402300799). Validate that the user doesn't use
more than that as otherwise we cause an assertion failure:
(process:1183396): GLib-CRITICAL **: 14:25:00.906: g_date_time_format: assertion 'datetime != NULL' failed
Additionally adjust the schema to allow bigger values as we use
'unsigned long long' to parse the value.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2128993
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The index page only really makes sense for the top level directory. The
specific index files are unreferenced since last commit. Drop them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix the main links in docs.rst main page to go to the full docs rather
than prompting one more click to the index page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When building the top level description from a header file the
'parseTopComment' method of the 'CParser' would include all trailing
lines into the <description> field. This was designed to concatenate
multi-line descriptions, but unfortunately in all cases also included
the Copyright statement which followed.
Explicitly end the scanning of the header on a line which starts with
'Copyright (C)' and truncate the spaces from the end of the last item.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
