When a block{commit,copy} job was aborted on a domain, block job handler
did not process it correctly, leaving a phantom job in the background.
Any further calls to any blockjob causes "block <jobtype> still active"
error. This patch fixes the blockjob handler so that it checks not only
for VIR_DOMAIN_BLOCK_JOB_FAILED status, but VIR_DOMAIN_BLOCK_JOB_CANCELED
status as well, followed by our existing cleanup routine.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135169
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If job is failed in qemuMigrationRun, we expect the jobinfo type as
FAILED. But jobinfo type won't be updated until entering
qemuMigrationWaitForCompletion. We should make it updated in all
conditions. Moreover, we can't use qemuMigrationUpdateJobStatus
here because job may fail in libvirt, so we can't query job status
from QEMU.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
The migration job status is traced in qemuMigrationUpdateJobStatus
which is called in qemuMigrationRun. But if migration is cancelled
before the trace such as in qemuMigrationDriveMirror, the jobinfo
type won't be updated to CANCELLED. After this patch, we can get
jobinfo type CANCELLED if migration is cancelled during drive
mirror. Moreover, we can't use qemuMigrationUpdateJobStatus
because from qemu's point of view it's just the drive mirror being
cancelled and the migration hasn't even started yet.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1160084
As of b6d4dad11b (1.2.5) we are trying to keep the status of FSFreeze
in the guest. Even though I've tried to fixed couple of corner cases
(6ea54769ba), it occurred to me just recently, that the approach is
broken by design. Firstly, there are many other ways to talk to
qemu-ga (even through libvirt) that filesystems can be thawed (e.g.
qemu-agent-command) without libvirt noticing. Moreover, there are
plenty of ways to thaw filesystems without even qemu-ga noticing (yes,
qemu-ga keeps internal track of FSFreeze status). So, instead of
keeping the track ourselves, or asking qemu-ga for stale state, it's
the best to let qemu-ga deal with that (and possibly let guest kernel
propagate an error).
Moreover, there's one bug with the following approach, if fsfreeze
command failed, we've executed fsthaw subsequently. So issuing
domfsfreeze in virsh gave the following result:
virsh # domfsfreeze gentoo
Froze 1 filesystem(s)
virsh # domfsfreeze gentoo
error: Unable to freeze filesystems
error: internal error: unable to execute QEMU agent command 'guest-fsfreeze-freeze': The command guest-fsfreeze-freeze has been disabled for this instance
virsh # domfsfreeze gentoo
Froze 1 filesystem(s)
virsh # domfsfreeze gentoo
error: Unable to freeze filesystems
error: internal error: unable to execute QEMU agent command 'guest-fsfreeze-freeze': The command guest-fsfreeze-freeze has been disabled for this instance
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virReportSystemError is reserved for reporting system errors, calling it
with VIR_ERR_* error codes produces error messages that do not make any
sense, such as
internal error: guest failed to start: Kernel doesn't support user
namespace: Link has been severed
We should prohibit wrong usage with a syntax-check rule.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit 6fcddfcd refactored job statistics but missed the jobinfo type updated
in qemuDomainGetJobInfo. After this patch, we can use virDomainGetJobInfo to
get jobinfo type again.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Add attribute to set vgamem_mb parameter of QXL device for QEMU. This
value sets the size of VGA framebuffer for QXL device. Default value in
QEMU is 8MB so reuse it also in libvirt to not break things.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
So far we didn't have any option to set video memory size for qemu video
devices. There was only the vram (ram for QXL) attribute but it was valid
only for the QXL video device.
To provide this feature to users QEMU has a dedicated device attribute
called 'vgamem_mb' to set the video memory size. We will use the 'vram'
attribute for setting video memory size for other QEMU video devices.
For the cirrus device we will ignore the vram value because it has
hardcoded video size in QEMU.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
QEMU has two different type of QXL display device. The first "qxl-vga"
is for primary video device and second "qxl" is for secondary video
device.
There are also two different ways how to specify those devices on qemu
command line, the first one and obsolete is using "-vga" option and the
current new one is using "-device" option. The "-vga" could be used only
to setup primary video device, so the "-vga qxl" equal to
"-device qxl-vga". Unfortunately the "-vga qxl" doesn't support setting
additional parameters for the device and "-global" option must be used
for this purpose. It's mandatory to use "-global qxl-vga...." to set the
parameters of primary video device previously defined with "-vga qxl".
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The vram attribute was introduced to set the video memory but it is
usable only for few hypervisors excluding QEMU/KVM and the old XEN
driver. Only in case of QEMU the vram was used for QXL.
This patch updates the documentation to reflect current code in libvirt
and also changes the cases when we will set the default vram attribute.
It also fixes existing strange default value for VGA devices 9MB to 16MB
because the video ram should be rounded to power of two.
The change of default value could affect migrations but I found out that
QEMU always round the video ram to power of two internally so it's safe
to change the default value to the next closest power of two and also
silently correct every domain XML definition. And it's also safe because
we don't pass the value to QEMU.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Get mounted filesystems list, which contains hardware info of disks and its
controllers, from QEMU guest agent 2.2+. Then, convert the hardware info
to corresponding device aliases for the disks.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Improve the monitor function to also retrieve the guest state of
character device (if provided) so that we can refresh the state of
virtio-serial channels and perhaps react to changes in the state in
future patches.
This patch changes the returned data from qemuMonitorGetChardevInfo to
return a structure containing the pty path and the state for all the
character devices.
The change to the testsuite makes sure that the data is parsed
correctly.
To be able to express some use cases of the RBD backing with libvirt, we
need to be able to specify a config file for the RBD client to qemu as
that is one of the commonly used options.
Some storage systems have internal support for snapshots. Libvirt should
be able to select a correct snapshot when starting a VM.
This patch adds a XML element to select a storage source snapshot for
the RBD protocol which supports this feature.
To allow reuse this non-trivial parser code in the backing store parser
this part of the command line parser needs to be split out into a
separate funciton.
Instead of splitting out various fields, pass the complete structure and
let the function pick various things of it.
As one of the callers isn't using virStorageSourcePtr to store the data,
this patch adds glue code that fills the data into a dummy
virStorageSourcePtr before calling the func.
This change will help when adding new fields that need output processing
in the future.
New qemu added a new event that is emitted when a virtio serial channel
is opened in the guest OS. This allows us to update the state of the
port in the output-only XML element.
This patch implements the monitor callbacks and necessary handlers to
update the state in the definition.
To unify future additions that require information from "query-chardev"
rename qemuMonitorGetPtyPaths and friends to qemuMonitorGetChardevInfo
and move the allocation of the returned hash into the top level
function.
When creating a disk image snapshot the libvirt code would blindly copy
the parents label to the newly created image. This runs into problems
when you start a VM from an image hosted on NFS (or other storage system
that doesn't support selinux labels) and the snapshot destination is on
a storage system that does support selinux labels. Libvirt's code in
that case generates a different security label for the image hosted on
NFS. This label is valid only for NFS images and doesn't allow access in
case of a locally stored image.
To fix this issue libvirt needs to refrain from copying security
information in cases where the default domain seclabel is a better
choice.
This patch repurposes the now unused @force argument of
virStorageSourceInitChainElement to denote whether a copy of the
security labelling stuff should be attempted or not. This allows to
fine-control the copy operation for cases where we need to keep the
label of the old disk vs. the cases where we need to keep the label
unset to use the default domain imagelabel.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1151718
Oops, I forgot to squash one more instance of the same check in the
previous commit (v1.2.10-144-g52691f9).
https://bugzilla.redhat.com/show_bug.cgi?id=1147331
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Any attempt to start a tunnelled migration with libvirtd that supports
RDMA migration (specifically commit v1.2.8-226-ged22a47) crashes
libvirtd on the destination host.
The crash is inevitable because qemuMigrationPrepareAny is always called
with NULL protocol in case of tunnelled migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1147331
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
As discussed on the upstream list, it's better not to make this
kind of predictions in libvirt. It may happen that qemu learns
how to enable OVMF on other architectures too and we shouldn't
try to chase that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, we are whitelisting architectures, that we know how to run
OVMF on. So far, only x86_64 was enabled. However, looking at qemu
code, the same commandline can be used to enable OVMF for armv7l and
aarch64.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I noticed this while working on qemuDomainGetBlockInfo. Assigning
a bool value to an int variable compiles fine, but raises red flags
on the maintenance front as it becomes too easy to assign -1 or 2
or any other non-bool value to the same variable.
* cfg.mk (sc_prohibit_int_assign_bool): New rule.
* src/conf/snapshot_conf.c (virDomainSnapshotRedefinePrep): Fix
offenders.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo)
(qemuDomainSnapshotCreateXML): Likewise.
* src/test/test_driver.c (testDomainSnapshotAlignDisks):
Likewise.
* src/util/vircgroup.c (virCgroupSupportsCpuBW): Likewise.
* src/util/virpci.c (virPCIDeviceBindToStub): Likewise.
* src/util/virutil.c (virIsCapableVport): Likewise.
* tools/virsh-domain-monitor.c (cmdDomMemStat): Likewise.
* tools/virsh-domain.c (cmdBlockResize, cmdScreenshot)
(cmdInjectNMI, cmdSendKey, cmdSendProcessSignal)
(cmdDetachInterface): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Ethernet interfaces in libvirt currently do not support bandwidth setting.
For example, following xml file for an interface will not apply these
settings to corresponding qdiscs.
<interface type="ethernet">
<mac address="02:36:1d:18:2a:e4"/>
<model type="virtio"/>
<script path=""/>
<target dev="tap361d182a-e4"/>
<bandwidth>
<inbound average="984" peak="1024" burst="64"/>
<outbound average="2000" peak="2048" burst="128"/>
</bandwidth>
</interface>
Signed-off-by: Anirban Chakraborty <abchak@juniper.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For some reason, commit id '72b4151f' triggered a Coverity uninitialized
'reply' variable check when referenced within the for loop.
It seems Coverity doesn't know that flags will have to be either AFFECT_LIVE
or AFFECT_CONFIG after the virDomainLiveConfigHelperMethod call.
By adding a "sa_assert()" to confirm that fact, Coverity is happy again.
https://bugzilla.redhat.com/show_bug.cgi?id=1164080
After a disk is hotunplugged a subsequent call to qemuDomainGetBlockIoTune
to get the --config settings of that disk will fail because the disk is no
longer found by qemuDiskPathToAlias causing an unexpected failure.
Since only the --live flag needs to have the disk device pointer, move the
fetch inside the (flags & VIR_DOMAIN_AFFECT_LIVE) condition. This will also
affect the results if no flags are provided or the --current flag is provided.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Seems the 'size_iops_sec' was a late add and the checks for whether
the field was defined, but unsupported and the maximum size of the
field were not being made.
Also, adjust blkdeviotune support error message for grammar, spelling
(paramater), and remove the "(need QEMU 1.7 or superior)". None of
our other similar error messages list which QEMU version is required.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since QEMU 1.2.0, we switched to QMP probing instead of parsing -help
(and other commands, such as -cpu ?) output. However, if QMP probing
failed, we still tried starting QEMU with various options and parsing
the output, which was guaranteed to fail because the output changed.
Let's just refuse parsing -help for QEMU >= 1.2.0.
https://bugzilla.redhat.com/show_bug.cgi?id=1160318
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We used to set migration capabilities only when a user asked for them in
flags. This is fine when migration succeeds since the QEMU process is
killed in the end but in case migration fails or if it's cancelled, some
capabilities may remain turned on with no way to turn them off. To fix
that, migration capabilities have to be turned on if requested but
explicitly turned off in case they were not requested but QEMU supports
them.
https://bugzilla.redhat.com/show_bug.cgi?id=1163953
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit 6e5c79a1 tried to fix deadlock between nwfilter{Define,Undefine}
and starting of guest, but this same deadlock exists for
updating/attaching network device to domain.
The deadlock was introduced by removing global QEMU driver lock because
nwfilter was counting on this lock and ensure that all driver locks are
locked inside of nwfilter{Define,Undefine}.
This patch extends usage of virNWFilterReadLockFilterUpdates to prevent
the deadlock for all possible paths in QEMU driver. LXC and UML drivers
still have global lock.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1143780
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In one of my previous patches (3a3c3780b) I've tried to fix the
problem of nvram path disappearing on a domain that's been
started and shut down again. I fixed this by explicitly saving
domain's config file. However, I did a bit of clumsy without
realizing we have a transient domains for which we don't save the
config file. Hence, any domain using UEFI became persistent.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use the device type name if we know it instead of its number,
even if we can't hotplug it:
qemuMonitorJSONAttachCharDevCommand:6094 : operation failed: Unsupported
char device type '10'
If the memory mode is specified as 'strict' and with one node, we
get the following error when starting domain.
error: Unable to write to '$cgroup_path/cpuset.mems': Device or resource busy
XML is configured with numatune as follows:
<numatune>
<memory mode='strict' nodeset='0'/>
</numatune>
It's broken by Commit 411cea638f
which moved qemuSetupCgroupForEmulator() before setting cpuset.mems
in qemuSetupCgroupPostInit.
Directory '$cgroup_path/emulator/' is created in qemuSetupCgroupForEmulator.
But '$cgroup_path/emulator/cpuset.mems' it not set and has a default value
(all nodes, such as 0-1). Then we setup '$cgroup_path/cpuset.mems' to the
nodemask (in this case it's '0') in qemuSetupCgroupPostInit. It must fail.
This patch makes '$cgroup_path/emulator/cpuset.mems' is set before
'$cgroup_path/cpuset.mems'. The action is similar with that in
qemuDomainSetNumaParamsLive.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
If the memory mode in numatune is specified as 'preferred' with one node
(such as nodeset='0'), domain's memory is not all in node 0 absolutely.
Assumption that node 0 doesn't have enough memory, memory can be allocated
on node 1 when qemu process startup. Then if we set cpuset.mems to '0',
it may invoke OOM.
Commit 1a7be8c600 changed the former logic of
checking memory mode in virDomainNumatuneGetNodeset. This patch adds the
check as before.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Check the arability of the options with the current qemu binary,
add them in the varable opt if yes, print a message if not.
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Detect if the the qemu binary currently in use support the bps_max option,
If yes add it to the command, if not, just ignore the option.
We don't print error here, because the check for invalide arguments
has alerady been made in qemu_driver.c
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Add support for bps_max and friends in the driver part.
In the part checking if a qemu is running, check if the running binary
support bps_max, if not print an error message, if yes add it to
"info" variable
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add the capability to detect if the qemu binary have the capability
to use bps_max and friends
Add a value in the enum virQEMUCapsFlags for the qemu capability.
Set it with virQEMUCapsSet if the binary suport bps_max and they friends.
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
PowerISA allows processors to run VMs in binary compatibility ("compat")
mode supporting an older version of ISA. QEMU has recently added support to
explicitly denote a VM running in compatibility mode through commit 6d9412ea
& 8dfa3a5e85. Now, a "compat" mode VM can be run by invoking this qemu
commandline on a POWER8 host: -cpu host,compat=power7.
This patch allows libvirt to exploit cpu mode 'host-model' to describe this
new mode for PowerKVM guests. For example, when a user wants to request a
power7 vm to run in compatibility mode on a Power8 host, this can be
described in XML as follows :
<cpu mode='host-model'>
<model>power7</model>
</cpu>
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
This adds support for PowerPC Little Endian architecture.,
and allows libvirt to spawn VMs based on 'ppc64le' architecture.
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1160084
As of b6d4dad1 (1.2.5) libvirt keeps track if domain disks have been
frozen. However, this falls into that set of information which don't
survive domain restart. Therefore, we need to clear the flag upon some
state transitions. Moreover, once we clear the flag we must update the
status file too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Extending the iothread disk support from pci to pci and ccw.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Finding the right type of disk should check for virtio as bus and
pci as device address type.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This is a reaction to Michal's fix [1] for non-NUMA systems that also
splits out conf/ out of util/ because libvirt_util shouldn't require
libvirt_conf if it is the other way around. This particular use case
worked, but we're trying to avoid it as mentioned [2], many times.
The only functions from virnuma.c that needed numatune_conf were
virDomainNumatuneNodesetIsAvailable() and virNumaSetupMemoryPolicy().
The first one should be in numatune_conf as it works with
virDomainNumatune, the second one just needs nodeset and mode, both of
which can be passed without the need of numatune_conf.
Apart from fixing that, this patch also fixes recently added
code (between commits d2460f85^..5c8515620) that doesn't support
non-contiguous nodesets. It uses new function
virNumaNodesetIsAvailable(), which doesn't need a stub as it doesn't use
any libnuma functions, to check if every specified nodeset is available.
[1] https://www.redhat.com/archives/libvir-list/2014-November/msg00118.html
[2] http://www.redhat.com/archives/libvir-list/2011-June/msg01040.html
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since there was a valid note to patch 43b67f2e about the best spot to
check for bandwidth set call while having libvirt daemon run in session
mode, this patch reverts previous changes dealing with bandwith
(also reverts adding variable @cfg in qemuDomainGetNumaParameters which
does not have any use at the moment, but getting and unreferencing
driver's config) in qemu_driver.c and qemu_command.c. There will be
another patch in the series which introduces the fix itself.
==404== 232 bytes in 1 blocks are definitely lost in loss record 669 of 758
==404== at 0x4C2B934: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==404== by 0x52A2BF3: virAlloc (viralloc.c:144)
==404== by 0x1D49AD70: qemuMigrationCookieAddStatistics (qemu_migration.c:554)
==404== by 0x1D49AD70: qemuMigrationBakeCookie (qemu_migration.c:1228)
==404== by 0x1D4A43B8: qemuMigrationFinish (qemu_migration.c:5002)
==404== by 0x1D4C9339: qemuDomainMigrateFinish3Params (qemu_driver.c:11526)
Introduced by commit 5d6fb96
https://bugzilla.redhat.com/show_bug.cgi?id=1159219
Users might want to update startupPolicy via the
virDomainUpdateDeviceFlags API too. This patch
implements the feature on config layer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Domain memory elements such as max_balloon and cur_balloon are
implemented as 'unsigned long long', whereas the 'memory' element
in NUMA cells is implemented as 'unsigned int'.
Use the same data type (unsigned long long) for 'memory' element
in NUMA cells.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
In qemuMigrationFinish mig->nbd can not be initialized by
qemuMigrationEatCookie without the QEMU_MIGRATION_COOKIE_NBD flag.
That causes qemuMigrationStopNBDServer to return early without
stopping the NBD server properly.
Signed-off-by: Weiwei Li <nuonuoli@tencent.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
There was no check for 'nodeset' attribute in numatune-related
elements. This patch adds validation that any nodeset specified does
not exceed maximum host node.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
When one domain is being undefined and at the same time started, for
example, there is a possibility of a rare problem occuring.
- Thread 1 does virDomainUndefine(), has the lock, checks that the
domain is active and because it's not, calls
virDomainObjListRemove().
- Thread 2 does virDomainCreate() and tries to lock the domain.
- Thread 1 needs to lock domain list in order to remove the domain from
it, but must unlock domain first (proper order is to lock domain list
first and the domain itself second).
- Thread 2 grabs the lock, starts the domain and releases the lock.
- Thread 1 grabs the lock and removes the domain from list.
With this patch:
- qemuDomainRemoveInactive() creates a QEMU_JOB_MODIFY if that's
possible, but since it must remove the domain from list either way,
it continues even when starting the job failed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1150505
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When daemon is killed right in the middle of probing a qemu binary for
its capabilities, the qemu process is left running. Next time the
daemon is starting, it cannot start the probing qemu process because the
one that's already running does have the pidfile flock()'d.
Reported-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Particularly in qemuBuildNumaArgStr(), there was a need for the advice
due to memory backing, which needs to know the nodeset it will be pinned
to. With newer qemu this caused the following error when starting
domain:
error: internal error: Advice from numad is needed in case of
automatic numa placement
even when starting perfectly valid domain, e.g.:
...
<vcpu placement='auto'>4</vcpu>
<numatune>
<memory mode='strict' placement='auto'/>
</numatune>
<cpu>
<numa>
<cell id='0' cpus='0' memory='524288'/>
<cell id='1' cpus='1' memory='524288'/>
</numa>
</cpu>
...
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138545
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Hotplugging and hotunplugging char devices is only supported through
'-device' and the check for device capability should be independently.
Coverity also complains about 'tmpChr->info.alias' could be NULL and we
are dereferencing it but it somehow only in this case don't recognize
that the value is set by 'qemuAssignDeviceChrAlias' so it's clearly
false positive. Add sa_assert to make coverity happy.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
commit 3e1e16aa8d (Use a port from the
migration range for NBD as well) changed ndb port allocation from
remotePorts to migrationPorts, but did not change the port releasing
process, which makes an error when migrating several times (above 64):
error: internal error: Unable to find an unused port in range
'migration' (49152-49215)
https://bugzilla.redhat.com/show_bug.cgi?id=1159245
Signed-off-by: Weiwei Li <nuonuoli@tencent.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1140981 reports that
the qemu-kvm shipped as part of RHEL 7.0 intentionally[1] cripples
block jobs by removing the 'block-stream' QMP command, while still
leaving 'block-job-cancel' as an unusable no-op. Meanwhile, we
already had existing code that checked whether block jobs were
completely missing (such as qemu 0.15), old style (cancel is
synchronous, and all commands spelled with '_'), or new style
(cancel is asynchronous, and all commands spelled with '-'), and
used that three-way probe to give decent error messages. At the
time that code was added, all existing qemu versions fell in one
of three buckets, and the code was using the presence of
'block-job-cancel' as the witness of which of the three buckets.
But now that RHEL qemu has shipped with intentionally crippled
'block-stream', we have a fourth bucket, which results in ugly
error messages when trying 'virsh blockpull':
error: Requested operation is not valid: Command 'block-stream' is not found
In reality, the fourth bucket should be treated the same as the
first bucket (no block job support); we can do that by realizing
that no existing build of qemu has working block-stream while
lacking block-job-cancel, so it is easiest to change our witness
to the command that starts a job rather than ends one. We still
act correctly regarding command spelling and whether cancel is
asynchronous. And on crippled RHEL builds, we now get the desired:
error: unsupported configuration: block jobs not supported with this qemu binary
[1] The intentional cripple is limited to qemu-kvm of RHEL; when using
qemu-kvm-rhev of RHEV, block job functionality is supported. Don't ask
me to explain the "why" behind it all - I'm just dealing with fallout
from someone else's decision.
* src/qemu/qemu_capabilities.h (QEMU_CAPS_BLOCKJOB_SYNC): Tweak comment.
* src/qemu/qemu_capabilities.c (virQEMUCapsCommands): Look for stream
rather than cancel when determining the flavor of block jobs supported.
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that all offenders have been cleaned, turn on a syntax-check
rule to prevent future offenders.
* cfg.mk (sc_prohibit_static_zero_init): New rule.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Avoid false
positive.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1141621
As part of attach processing, assign the device aliases by calling
qemuAssignDeviceAliases during qemuDomainQemuAttach once all the devices
are found after the qemuParseCommandLinePid processing.
This will alleviate a symptom that caused a libvirtd crash during an
attempted device detach.
In qemuDomainDetachControllerDevice if the info.alias already exists
a call to qemuAssignDeviceControllerAlias would overwrite the existing
so avoid this possibility.
Not every error message from qemu-ga has to have the 'class' field
filled out. For instance, I've seen this error message lately:
qemuAgentCheckError:1047 : unable to execute QEMU agent command \
{"execute":"guest-set-time"}: \
{"error":{"desc":"Invalid parameter type, expected: integer"}}
However, this got translated into rather generic error message:
internal error: unable to execute QEMU agent command
'guest-set-time': unknown QEMU command error
So we've dropped better error message in favor of a generic one.
This is due to our code which expects 'class' which is not
present here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds functionality to processNicRxFilterChangedEvent().
The old and new multicast lists are compared and the filters in
the macvtap are programmed to match the guest's filters.
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=956506 documents that
given a domain where an internal snapshot parent has an external
snapshot child, we lacked a safety check when trying to use the
--children-only option to snapshot-delete:
$ virsh start dom
$ virsh snapshot-create-as dom internal
$ virsh snapshot-create-as dom external --disk-only
$ virsh snapshot-delete dom external
error: Failed to delete snapshot external
error: unsupported configuration: deletion of 1 external disk snapshots not supported yet
$ virsh snapshot-delete dom internal --children
error: Failed to delete snapshot internal
error: unsupported configuration: deletion of 1 external disk snapshots not supported yet
$ virsh snapshot-delete dom internal --children-only
Domain snapshot internal children deleted
While I'd still like to see patches that actually do proper external
snapshot deletion, we should at least fix the inconsistency in the
meantime. With this patch:
$ virsh snapshot-delete dom internal --children-only
error: Failed to delete snapshot internal
error: unsupported configuration: deletion of 1 external disk snapshots not supported yet
* src/qemu/qemu_driver.c (qemuDomainSnapshotDelete): Fix condition.
Signed-off-by: Eric Blake <eblake@redhat.com>
To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()
Tuning NUMA or network interface parameters requires root
privileges to manage cgroups. Thus an attempt to set some of these
parameters in session mode on a running domain should be invalid
followed by an error. An example might be memory tuning which raises
an error in such case.
The following behavior in session mode will be present after applying
this patch:
Tuning | SET | GET |
----------|---------------|--------|
NUMA | shut off only | always |
Memory | never | never |
Interface | never | always |
Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1126762
The documentation for the restore hook states that returning an empty
XML is equivalent with copying the input. There was a bug in the code
checking the returned string by checking the string instead of the
contents. Use the new helper to check if the string is empty.
virt-manager on Fedora sets up i686 hosts with "/usr/bin/qemu-kvm" emulator,
which in turn unconditionally execs qemu-system-x86_64 querying capabilities
then fails:
Error launching details: invalid argument: architecture from emulator 'x86_64' doesn't match given architecture 'i686'
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/engine.py", line 748, in _show_vm_helper
details = self._get_details_dialog(uri, vm.get_connkey())
File "/usr/share/virt-manager/virtManager/engine.py", line 726, in _get_details_dialog
obj = vmmDetails(conn.get_vm(connkey))
File "/usr/share/virt-manager/virtManager/details.py", line 399, in __init__
self.init_details()
File "/usr/share/virt-manager/virtManager/details.py", line 784, in init_details
domcaps = self.vm.get_domain_capabilities()
File "/usr/share/virt-manager/virtManager/domain.py", line 518, in get_domain_capabilities
self.get_xmlobj().os.machine, self.get_xmlobj().type)
File "/usr/lib/python2.7/site-packages/libvirt.py", line 3492, in getDomainCapabilities
if ret is None: raise libvirtError ('virConnectGetDomainCapabilities() failed', conn=self)
libvirtError: invalid argument: architecture from emulator 'x86_64' doesn't match given architecture 'i686'
Journal:
Oct 16 21:08:26 goatlord.localdomain libvirtd[1530]: invalid argument: architecture from emulator 'x86_64' doesn't match given architecture 'i686'
If VM is configured with many devices(including passthrough devices)
and large memory, libvirtd will take seconds(in the worst case) to
wait for monitor. In this period the qemu process may run on any
PCPU though I intend to pin emulator to the specified PCPU in xml
configuration.
Actually qemu process takes high cpu usage during vm startup.
So this is not the strict CPU isolation in this case.
Signed-off-by: Zhou yimin <zhouyimin@huawei.com>
To allow live modification of device backends in qemu libvirt needs to
be able to hot-add/remove "objects". Add monitor backend functions to
allow this.
This function will be used for hot-add/remove of RNG backends,
IOThreads, memory backing objects, etc.
Our qemu monitor code has a converter from key-value pairs to a json
value object. I want to re-use the code later and having it part of the
monitor command generator is inflexible. Split it out into a separate
helper.
When enabling the migration_address option, by default it is
set to "127.0.0.1", but it's not a valid address for migration.
so we should add verification and set the default migration_address
to "0.0.0.0".
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
if specifying migration_host to an Ipv6 address without brackets,
it was resolved to an incorrect address, such as:
tcp:2001:0DB8::1428:4444,
but the correct address should be:
tcp:[2001:0DB8::1428]:4444
so we should add brackets when parsing it.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
After set domain's numa parameters for running domain, save the change,
save the change into live xml is needed to survive restarting the libvirtd,
same story with bug 1146511; meanwihle add call
qemuDomainObjBeginJob/qemuDomainObjEndJob in qemuDomainSetNumaParameters
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
After set the blkio parameters for running domain, save the change into
live xml is needed to survive restarting the libvirtd, same story with
bug 1146511, meanwhile add call qemuDomainObjBeginJob/qemuDomainObjEndJob
in qemuDomainSetBlkioParameters
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
This patch fills in the functionality of
processNicRxFilterChangedEvent(). It now checks if it is appropriate
to respond to the NIC_RX_FILTER_CHANGED event (based on device type
and configuration) and takes appropriate action. Currently it checks
if the guest interface has been configured with
trustGuestRxFilters='yes', and if the host side device is macvtap. If
so, and the MAC address on the guest has changed, the MAC address of
the macvtap device is changed to match.
The result of this is that networking from the guest will continue to
work if the mac address of a macvtap-connected network device is
changed from within the guest, as long as trustGuestRxFilters='yes'
(previously changing the MAC address in the guest would break
networking).
NIC_RX_FILTER_CHANGED is sent by qemu any time a NIC driver in the
guest modified the NIC's RX Filter (for example, if the MAC address of
the NIC is changed by the guest).
This patch doesn't do anything useful with that event; it just sets up
all the plumbing to get news of the event into a worker thread with
all proper locking/reference counting, and provide an easy place to
add in desired functionality.
See src/qemu/EVENTHANDLERS.txt for information/instructions on adding
a libvirt-internal handler for a qemu event (using
NIC_RX_FILTER_CHANGED as an example).
This text was in the commit log for the patch that added the event
handler for NIC_RX_FILTER_CHANGED, and John Ferlan expressed a desire
that the information not be "lost", so I've put it into a file in the
qemu directory, hoping that it might catch the attention of future
writers of handlers for qemu events.
