Modified the places where virNodeGetInfo was used for the purpose
of obtaining the maximum node CPU number. Transparently falling
back to virNodeGetInfo in case of failure.
Wrote utility function vshNodeGetCPUCount to compute node CPU
number.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=873344 suggested that
the grouping 'boot', 'shutdown', 'reboot'; as well as the grouping
'start', 'stop', 'restart'; might be easier to remember than the
current mix of 'start', 'shutdown', 'reboot'.
Also, touch up the wording of 'reboot' to be more accurate.
* tools/virsh-domain.c (domManagementCmds): Add other command names.
* tools/virsh.pod (start, shutdown, reboot): Document the aliases.
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=862515
which describes inconsistencies in dealing with duplicate mac
addresses on network devices in a domain.
(at any rate, it resolves *almost* everything, and prints out an
informative error message for the one problem that isn't solved, but
has a workaround.)
A synopsis of the problems:
1) you can't do a persistent attach-interface of a device with a mac
address that matches an existing device.
2) you *can* do a live attach-interface of such a device.
3) you *can* directly edit a domain and put in two devices with
matching mac addresses.
4) When running virsh detach-device (live or config), only MAC address
is checked when matching the device to remove, so the first device
with the desired mac address will be removed. This isn't always the
one that's wanted.
5) when running virsh detach-interface (live or config), the only two
items that can be specified to match against are mac address and model
type (virtio, etc) - if multiple netdevs match both of those
attributes, it again just finds the first one added and assumes that
is the only match.
Since it is completely valid to have multiple network devices with the
same MAC address (although it can cause problems in many cases, there
*are* valid use cases), what is needed is:
1) remove the restriction that prohibits doing a persistent add of a
netdev with a duplicate mac address.
2) enhance the backend of virDomainDetachDeviceFlags to check for
something that *is* guaranteed unique (but still work with just mac
address, as long as it yields only a single results.
This patch does three things:
1) removes the check for duplicate mac address during a persistent
netdev attach.
2) unifies the searching for both live and config detach of netdevices
in the subordinate functions of qemuDomainModifyDeviceFlags() to use the
new function virDomainNetFindIdx (which matches mac address and PCI
address if available, checking for duplicates if only mac address was
specified). This function returns -2 if multiple matches are found,
allowing the callers to print out an appropriate message.
Steps 1 & 2 are enough to fully fix the problem when using virsh
attach-device and detach-device (which require an XML description of
the device rather than a bunch of commandline args)
3) modifies the virsh detach-interface command to check for multiple
matches of mac address and show an error message suggesting use of the
detach-device command in cases where there are multiple matching mac
addresses.
Later we should decide how we want to input a PCI address on the virsh
commandline, and enhance detach-interface to take a --address option,
eliminating the need to use detach-device
* src/conf/domain_conf.c
* src/conf/domain_conf.h
* src/libvirt_private.syms
* added new virDomainNetFindIdx function
* removed now unused virDomainNetIndexByMac and
virDomainNetRemoveByMac
* src/qemu/qemu_driver.c
* remove check for duplicate max from qemuDomainAttachDeviceConfig
* use virDomainNetFindIdx/virDomainNetRemove instead
of virDomainNetRemoveByMac in qemuDomainDetachDeviceConfig
* use virDomainNetFindIdx instead of virDomainIndexByMac
in qemuDomainUpdateDeviceConfig
* src/qemu/qemu_hotplug.c
* use virDomainNetFindIdx instead of a homespun loop in
qemuDomainDetachNetDevice.
* tools/virsh-domain.c: modified detach-interface command as described
above
Using VIR_DOMAIN_XML_MIGRATABLE flag, one can request domain's XML
configuration that is suitable for migration or save/restore. Such XML
may contain extra run-time stuff internal to libvirt and some default
configuration may be removed for better compatibility of the XML with
older libvirt releases.
This flag may serve as an easy way to get the XML that can be passed
(after desired modifications) to APIs that accept custom XMLs, such as
virDomainMigrate{,ToURI}2 or virDomainSaveFlags.
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
The new command 'virsh blockcommit $dom $disk' requests the start
of an asynchronous commit operation across the entire chain of
$disk. Further arguments can fine-tune which portion of the
chain is committed. Existing 'virsh blockjob' commands can then
track the status, change the bandwidth, or abort the commit job.
With a bit more on the command line, 'virsh blockcommit $dom $disk
--wait --verbose' can be used for blocking behavior, with visual
feedback on the overall status, and can be canceled with Ctrl-C.
The overall design, including the wait loop logic, borrows heavily
from the existing blockpull command.
* tools/virsh-domain.c (cmdBlockCommit): New function.
* tools/virsh.pod (blockcommit): Document it.
This improve helper vshStringToArray to accept const string as
argument instead. To not convert the const string when using
vshStringToArray, and thus avoid motifying it.
I got an off-list report about a bad diagnostic:
Target network card mac 52:54:00:49:07:ccdoes not match source 52:54:00:49:07:b8
True to form, I've added a syntax check rule to prevent it
from recurring, and found several other offenders.
* cfg.mk (sc_require_whitespace_in_translation): New rule.
* src/conf/domain_conf.c (virDomainNetDefCheckABIStability): Add
space.
* src/esx/esx_util.c (esxUtil_ParseUri): Likewise.
* src/qemu/qemu_command.c (qemuCollectPCIAddress): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata)
(qemuDomainGetMetadata): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeNetBridge): Likewise.
* src/rpc/virnettlscontext.c
(virNetTLSContextCheckCertDNWhitelist): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainResume): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives):
Avoid false negatives.
* tools/virsh-domain.c (info_save_image_dumpxml): Reword.
Based on a report by Luwen Su.
When setting the cpu tunables in virsh you are able to update only a
subset of them. Virsh while doing the update updated all of the
tunables, changed ones with new values and unchanged with old ones.
This is unfortunate as it:
a) might overwrite some other change by a race condition (unprobable)
b) fails with range checking as some of the old values saved might be
out of range
This patch changes the update procedure so that only the changed value
is updated on the host.
This patch also fixes a very unprobable memory leak if the daemon would
return a string tunable parameter, as the typed parameter array was not
cleared.
Yesterday's commit 15d2c9f pointed out that virsh was still using
localtime(), which is not thread-safe, even though virsh is
definitely multi-threaded. Even if we only ever triggered it from
one thread, it's better safe than sorry for maintenance purposes.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_nonreentrant):
Tighten the rule.
* tools/virsh.c (vshOutputLogFile): Avoid localtime.
(vshEditWriteToTempFile, vshEditReadBackFile, cmdCd, cmdPwd)
(vshCloseLogFile): Avoid strerror.
* tools/console.c (vshMakeStdinRaw): Likewise.
* tools/virsh-domain.c (vshGenFileName): Fix spacing in previous
patch.
On 09/04/2012 08:20 AM, Eric Blake wrote:
> tv_sec is required by POSIX to be
> of type time_t; so this is a bug in the OpenBSD header
> [for declaring it as long]
Most likely this problem arose because of the patch I pushed
in gnulib commit e07d7c40f3ca5ec410cf5aa6fa03cfe51e712039.
Previously, gnulib required timeval's tv_sec to be
the same size as time_t. But now, it requires only that
tv_sec be big enough to hold a time_t.
This patch was needed for Emacs. Without the patch, gnulib
replaced struct timeval on OpenBSD, and this messed up
utimens.c, and Emacs wouldn't build.
Alternatively, gnulib could substitute its own struct timeval
for the system's, wrapping every struct timeval-using function
(gettimeofday, futimesat, futimes, lutimes, etc. That'd be
more work, though. And it would introduce some performance
issues with gettimeofday, which is supposed to be fast.
I've been trying to get away from using struct timeval,
and to use the higher-resolution struct timespec instead,
so messing with these obsolescent interfaces has been
lower priority for me. But if someone wants to take the
more-ambitious approach that'd be fine, I expect.
For this particular case, though, how about if we avoid
the problem entirely? libvirt doesn't need to use struct
timeval here at all. It makes libvirt smaller and probably
faster, and it ports to OpenBSD without messing with gnulib.
Now that vshCommandRun() checks for the connection automaticaly, remove
all of the redundant checks in the code.
vshConnectionUsability() no longer needs to be exported and this patch
marks it static.
In preparation for splitting virsh-interface.c, I found these
functions need to be declared in virsh.h, as well as one that
belongs more properly in virsh-domain.h. Also, since we
use the VSH_BY* flags in more than one function, I improved
how they are used.
* tools/virsh.h (vshNameSorter, vshCmdHasOption): Declare.
(VSH_BYID): Turn into enum.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.h): ...here.
* tools/virsh.c: (vshNameSorter): Export.
(cmd_has_option): Rename...
(vshCmdHasOption): ...and export.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.c (vshCommandOptDomainBy): ...here, adjust
signature, and check flags.
* tools/virsh-network.c (vshCommandOptNetworkBy): Update callers.
* tools/virsh-nwfilter.c (vshCommandOptNWFilterBy): Likewise.
* tools/virsh-secret.c (vshCommandOptSecret): Likewise.
* tools/virsh-domain-monitor.c (includes): Likewise.
* tools/virsh-host.c (includes): Likewise.
Another file worth compiling on its own instead of by .c inclusion.
* tools/virsh-domain-monitor.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.h (vshGetDomainDescription): Move to correct
header.
* tools/virsh-domain-monitor.c: Use new header.
* tools/virsh.c: Likewise.
* tools/virsh-domain.c: Likewise.
The virsh-domain.c file was pretty self-contained; the only
entry point was the table of command definitions. The bulk
of this patch is making more functions in virsh.c reusable.
A later patch will clean up poor naming choices.
* tools/Makefile.am (virsh_SOURCES): Build virsh-domain.c.
* tools/virsh-domain.h: New file.
* tools/virsh.h (virshReportError, vshResetLibvirtError)
(vshAskReedit, vshStreamSink): Declare.
* tools/virsh.c: Switch from using .c to .h.
(virshReportError, vshResetLibvirtError, vshAskReedit)
(vshStreamSink, prettyCapacity): Export.
(vshCatchInt): Move...
* tools/virsh-domain.c: ...into sole user. Use header.
It's easier to order things in topological order than it is to
forward declare in one file for use only by one other file.
* tools/virsh.c (vshWatchJob, parseRateStr)
(vshDomainStateToString, vshDomainStateReasonToString)
(vshDomainControlStateToString, vshDomainVcpuStateToString): Drop
useless prototypes.
* tools/virsh-domain.c (vshWatchJob): Move earlier.
The '#endif' for a WIN32 conditional was placed one function
too high, leaving the impl of the console command enabled
and referencing functions that were disabled
Virsh uses an error handler to save errors from libvirt. On some code
paths it's needed to clear libvirt errors and continue on fallback code
paths without reporting failure.
This patch adds function vshResetLibvirtError() that clears error
returned by libvirt and updates all places where the old two-line method
was used.
When undefining a domain and removing associated storage using "virsh
undefine --storage" the domain was at first undefined and after that the
storage removal proces was started. If the user specified an invalid
disk to remove, the error could not be corrected.
This patch moves enumeration and filtering of volumes that should be
removed before the domain is undefined, but the removal process is still
kept after the domain has been undefined.
This splits commands to manage domain into virsh-domain.c,The helpers
not for common use are moved into them too. Standard copyright is added
for the new file.
* tools/virsh.c:
- Remove commands for domain group, and one helper
(vshDomainVcpuStateToString)
- vshStreamSink is moved before commands's definition for it's
also used by commands not of domain group, such as volUpload.
* tools/virsh-domain.c:
- New file, commands for domain group and the one helper are
moved into it.
* po/POTFILES.in:
- Add virsh-domain.c
* cfg.mk:
- Skip to check config.h including for virsh-domain.c
