If a test expects either a parse error or a failure but then there is
neither a parse error nor a failure, then properly mark the test as
failing, instead of failing later on (e.g. trying to open a
non-existing .args file).
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
The guest of usb-bus-missing does not cause a parse error, but a
validation issue -- hence, switch from DO_TEST_PARSE_ERROR to
DO_TEST_FAILURE.
Fixes commit b003b9781b.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
For win32 we need EXIT_AM_SKIP which is in testutils.h. We must
define NO_LIBVIRT to prevent replacement of fprintf with
virFilePrintf as we can't link to libvirt_util.la
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The commandhelper binary is a helper for commandtest that
validates what file handles were inherited. For this to
work reliably we must not have any libraries that leak
file descriptors into commandhelper. Unfortunately some
versions of gnutls will intentionally open file handles
at library load time via a constructor function.
We previously hacked around this in
commit 4cbc15d037
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Fri May 2 09:55:52 2014 +0200
tests: don't fail with newer gnutls
gnutls-3.3.0 and newer leaves 2 FDs open in order to be backwards
compatible when it comes to chrooted binaries [1]. Linking
commandhelper with gnutls then leaves these two FDs open and
commandtest fails thanks to that. This patch does not link
commandhelper with libvirt.la, but rather only the utilities making
the test pass.
Based on suggestion from Daniel [2].
[1] http://lists.gnutls.org/pipermail/gnutls-help/2014-April/003429.html
[2] https://www.redhat.com/archives/libvir-list/2014-April/msg01119.html
That fix relied on fact that while libvirt.so linked with
gnutls, libvirt_util.la did not link to it. With the
introduction of the util/vircrypto.c file that assumption
is no longer valid. We must not link to libvirt_util.la
at all - only gnulib and libc can (hopefully) be relied
on not to open random file descriptors in constructors.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For vhost-user ports, Open vSwitch acts as the server and QEMU the client.
When OVS crashed or restart, QEMU shoule be reconnect to OVS.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This commit adds new events for two methods and operations: *PoolBuild() and
*PoolDelete(). Using the event-test and the commands set below we have the
following outputs:
$ sudo ./event-test
Registering event callbacks
myStoragePoolEventCallback EVENT: Storage pool test Defined 0
myStoragePoolEventCallback EVENT: Storage pool test Created 0
myStoragePoolEventCallback EVENT: Storage pool test Started 0
myStoragePoolEventCallback EVENT: Storage pool test Stopped 0
myStoragePoolEventCallback EVENT: Storage pool test Deleted 0
myStoragePoolEventCallback EVENT: Storage pool test Undefined 0
Another terminal:
$ sudo virsh pool-define test.xml
Pool test defined from test.xml
$ sudo virsh pool-build test
Pool test built
$ sudo virsh pool-start test
Pool test started
$ sudo virsh pool-destroy test
Pool test destroyed
$ sudo virsh pool-delete test
Pool test deleted
$ sudo virsh pool-undefine test
Pool test has been undefined
This commits can be a solution for RHBZ #1475227.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1475227
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The VxHS block device will only use the newer formatting options and
avoid the legacy URI syntax.
An excerpt for a sample QEMU command line is:
-drive file.driver=vxhs,file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\
file.server.type=tcp,file.server.host=192.168.0.1,\
file.server.port=9999,format=raw,if=none,id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
id=virtio-disk0
Update qemuxml2argvtest with a simple test.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add the backing parse and a test case to verify parsing of VxHS
backing storage.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Alter the schema to allow a VxHS block device. Sample XML is:
<disk type='network' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251'>
<host name='192.168.0.1' port='9999'/>
</source>
<target dev='vda' bus='virtio'/>
<serial>eb90327c-8302-4725-9e1b-4e85ed4dc251</serial>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</disk>
Update the html docs to describe the capability for VxHS.
Alter the qemuxml2xmltest to validate the formatting.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Using the query-qmp-schema introspection - look for the 'vxhs'
blockdevOptions type.
NB: This is a "best effort" type situation as there is not a
mechanism to determine whether the running QEMU has been
built with '--enable-vxhs'. All we can do is check if the
option to use vxhs for a blockdev-add exists in the command
infrastructure which does not take that into account when
building its table of commands and options.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This is particularly useful on operating systems that don't ship
Python as part of the base system (eg. FreeBSD) while still working
just as well as it did before on Linux.
While at it, make it explicit that our scripts are only going to
work with Python 2, and remove the usage of unbuffered I/O, which
as far as I can tell has no effect on the output files.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This is particularly useful on operating systems that don't ship
Perl as part of the base system (eg. FreeBSD) while still working
just as well as it did before on Linux.
In one case (src/rpc/genprotocol.pl) the interpreter path was
missing altogether.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Create/use a helper to perform object allocation.
Adjust storagevolxml2argvtest.c in order to use the allocator and
setting of the obj->def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Available since QEMU 2.10.0 (specifically commit
v2.9.0-2233-g53f9a6f45f).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The features were added to QEMU by commit v2.4.0-1690-gf7fda28094 as
Skylake Server features.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Adding functionality to libvirt that will allow querying the interface
for the availability of switchdev Offloading NIC capabilities.
The switchdev mode was introduced in kernel 4.8, the iproute2-devlink
command to retrieve the switchdev NIC feature with command example:
devlink dev eswitch show pci/0000:03:00.0
This feature is needed for Openstack so we can do a scheduling decision
if the NIC is in Hardware Offload (switchdev) or regular SR-IOV (legacy) mode.
And select the appropriate hypervisors with the requested capability see [1].
[1] - https://specs.openstack.org/openstack/nova-specs/specs/pike/approved/enable-sriov-nic-features.html
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1075520
Apart from generic checks, we need to constrain netmask/prefix
length a bit. Thing is, with current implementation QEMU needs to
be able to 'assign' some IP addresses to the virtual network. For
instance, the default gateway is at x.x.x.2, dns is at x.x.x.3,
the default DHCP range is x.x.x.15-x.x.x.30. Since we don't
expose these settings yet, it's safer to require shorter prefix
to have room for the defaults.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: laine@laine.org
https://bugzilla.redhat.com/show_bug.cgi?id=1075520
Currently, all that users can specify for an interface type of
'user' is the common attributes: PCI address, NIC model (and
that's basically it). However, some need to configure other
address range than the default one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: laine@laine.org
Add a couple of tests to "validate" checks in domain_conf that either
a missing secrettype (CONFIG_UNSUPPORTED) or an mismatched secrettype
of ceph for an iSCSI disk (INTERNAL_ERROR) will cause a parsing error.
Alter the example to remove the <auth> from:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='iscsi-pool' volume='unit:0:0:1' mode='host'/>
<auth username='myuser'>
<secret type='iscsi' usage='libvirtiscsi'/>
</auth>
<target dev='vdb' bus='virtio'/>
</disk>
and
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='iscsi-pool' volume='unit:0:0:2' mode='direct'/>
<auth username='myuser'>
<secret type='iscsi' usage='libvirtiscsi'/>
</auth>
<target dev='vdc' bus='virtio'/>
</disk>
The reality is, it's not even used. For a <source pool> the authdef
from the storage source pool will supercede whatever is in the <disk>
definition during virStorageTranslateDiskSourcePool processing. In fact,
if the pool doesn't have/need authentication, then the authdef would
be removed anyway as the storage pool would be handling things.
The "proof" for this is in the adjustment to the test to add an
<auth> for a disk. The resulting .args file won't add what normally
would be added "myname:encodedpassword@" prior to the hostname in
the IQN (e.g. iscsi://myname:encodedpassword@iscsi.example.org:3260/...
For reference, these were generated by updating a local qemu git
repository to the latest upstream, making sure the latest dependencies
were met via "dnf builddep qemu" from my sufficiently privileged root
account, checking out the v2.10.0 tag, and building in order to generate
an "x86_64-softmmu/qemu-system-x86_64" image.
Then using a clean libvirt tree updated to master and built, the image
was then provided as input:
tests/qemucapsprobe /path/to/x86_64-softmmu/qemu-system-x86_64 > \
tests/qemucapabilitiesdata/caps_2.10.0.x86_64.replies
With the .replies file in place and the DO_TEST line added and build,
then running the following commands:
touch tests/qemucapabilitiesdata/caps_2.10.0.x86_64.xml
VIR_TEST_REGENERATE_OUTPUT=1 ./tests/qemucapabilitiestest
to generate tests/qemucapabilitiesdata/caps_2.10.0.x86_64.xml and both
were added to the commit.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1477880
If the "/#" is missing from the provided iSCSI path, then we need
to provide the default LUN of /0; otherwise, QEMU will fail to parse
the URL causing a failure to either create the guest or hotplug
attach the storage.
During post parse, for any iSCSI disk or hostdev, scan the source
path looking for the presence of '/', if found, then we can assume
the LUN is provided. If not found, alter the input XML to add the
"/0". This will cause the generated XML to have the generated
value when the domain config is saved after post parse.
Add a new CPU model called 'EPYC' to model processors from AMD EPYC
family (which includes EPYC 76xx,75xx,74xx, 73xx and 72xx).
The following features bits have been added/removed compare to Opteron_G5
Added: monitor, movbe, rdrand, mmxext, ffxsr, rdtscp, cr8legacy, osvw,
fsgsbase, bmi1, avx2, smep, bmi2, rdseed, adx, smap, clfshopt, sha
xsaveopt, xsavec, xgetbv1, arat
Removed: xop, fma4, tbm
The patch is depend on EPYC CPU model supported introduced in qemu [1]
[1] https://patchwork.kernel.org/patch/9902205/
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
arm/aarch64 -M virt on KVM doesn't and will never work with standard
VGA card emulation. The recommended method is to use type=virtio, so
let's make it the default for video devices without an explicit type
set by the user.
https://bugzilla.redhat.com/show_bug.cgi?id=1404112
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Will be needed for future patches to pull the default video type
setting out of XML parsing routines.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
There were a few places in our code where the following pattern in 'if'
condition occurred:
if ((foo = bar() < 0))
do something;
This patch adjusts the conditions to the expected format:
if ((foo = bar()) < 0)
do something;
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1488192
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently while parsing domain XML we clear the UNIX path if it matches
one of the auto-generated paths by libvirt. After that when the guest
is started new path is generated but the mode is also changed to "bind".
In the real-world use-case the mode should not change, it only happens
if a user provides a mode='connect' and path that matches one of the
auto-generated path or not provides a path at all.
Before *reconnect* feature was introduced there was no issue, but with
the new feature we need to make sure that it's used only with "connect"
mode, therefore we need to move the mode change into parsing in order
to have a proper error reported by validation code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The test was introduced by 60135b22db.
The auto-generated path is removed by post-parse callback which
also changes the mode from "connect" to "bind" since the auto-generated
path makes sense only for "bind" mode.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
With gnutls 3.6.0, SHA1 is no longer accepted for certificate
signatures. We must usw SHA256 instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit e4cb850081 changed the way ssh command line is created by
adding '--' before the hostname in order to fix a potential security
flaw. However it failed to modify the tests, so let's do that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Our backing probing code handles directory file types properly in
virStorageFileGetMetadataRecurse(), by that I mean it leaves them
alone. However its caller, the virStorageFileGetMetadata() resets the
type to raw before probing, without even checking the type. We need
to special-case TYPE_DIR in order to achieve desired results.
Also, in order to properly test this, we need to stop resetting format
of volumes in tests for TYPE_DIR (probably the reason why we didn't
catch that and why the test data didn't need to be modified).
Partially-resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1443434
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While formatting disk or chardev element they both uses
virDomainDiskSourceDefFormatSeclabel() function which also closes
the source element. This is not extendable.
Use the new virXMLFormatElement() to properly format the source
element with possible child elements.
As a side effect it fixes a bug in disk source formatting.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Currently we accept and correctly parse this chardev XML:
...
<channel type='tcp'>
<source mode='connect'/>
<source mode='bind' host='localhost'/>
<source service='4567'/>
<target type='virtio' name='test'/>
</channel>
...
The parsed formatted XML is:
...
<channel type='tcp'>
<source mode='connect' host='localhost' service='4567'/>
<target type='virtio' name='test'/>
</channel>
...
That behavior is super wrong and should not be allowed. If you notice
the current parse takes the first found attribute and uses that value,
so for example from the "<source mode='bind' host='localhost'/>" only
the "host" attribute is used. It works the same way for all possible
attributes that we are able to parse for source element.
This patch enforces providing only one source element for all character
devices, only for UDP type we allow to provide two source elements
since you can specify both modes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The virDomainDef created by testBuildDomainDef in securityselinuxtest
adds a seclabel but does not increment nseclabels. Also, it should
populate seclabel->model with 'selinux'.
While at it, use the secdef itself to populate values instead of
the indirection through def->seclabels[0].
I mistakenly thought pSeries guests supported 32 PHBs,
but it turns out they only support 31. Validate the
target index accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1479647
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Split one of the existing tests to ensure both configuration
errors it contained cause a failure, and introduce a new
test case.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
There's some specific logic in qemuBuildCpuCommandLine to support
auto adding -cpu qemu 32 for arch=i686 with an x86_64 qemu binary.
Add a test case for it
In preparation for making the object private, create a couple of API's
to get the obj->def & obj->newDef and set the obj->def.
While altering networkxml2conftest.c to use the virNetworkObjSetDef
API, fix the name of the variable from @dev to @def
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1458638
This code is so complicated because we allow enabling the same
bits at many places. Just like in this case: huge pages can be
enabled by global <hugepages/> element under <memoryBacking> or
on per <memory/> basis. To complicate things a bit more, users
are allowed to omit the page size which case the default page
size is used. And this is what is causing this bug. If no page
size is specified, @pagesize is keeping value of zero throughout
whole function. Therefore we need yet another boolean to hold
[use, don't use] information as we can't sue @pagesize for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
So the hostdev manager has some lists to keep track which devices
are active (=assigned to a domain) or inactive. The manager and
its lists are allocated in myInit and freed in myCleanup but one
of them (activeSCSIHostdevs) was missing. Also, the order in
which the cleanup was done doesn't make it easy to spot it,
therefore reoder it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virDomainDef is not an instance of virObject thus
virObjectUnref() is not the correct function to be called.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Validate that we can pass QEMU command line options using a default
namespace, instead of a prefixed namespace
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In testMessageSingleArrayRef the string is doubly referenced.
Therefore we have to free also the first pointer to the string.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some tests take already prepared domain from previous tests. In
this case, the domain is freed by the first test that doesn't
keep the domain. However, if there's no such test case domain is
leaked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After reading the contents of a file some cleanup is performed.
However, the check for it might access a byte outside of the
string - if the file is empty in the first place. Then strlen()
is zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds support for automatic VNC port assignment for bhyve guests.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The libxl library allows a libxl_domain_config object to be serialized
from/to a JSON string. Use this to allow testing of the XML to
libxl_domain_config conversion process. Test XML is converted to
libxl_domain_config, which is then serialized to json. A json template
corresponding to the test XML is converted to a libxl_domain_config
object using libxl_domain_config_from_json(), and then serialized
back to json using libxl_domain_config_to_json(). The two json
docs are then compared.
Using libxl to convert the json template to a libxl_domain_config
object and then back to json provides a simple way to account for
any changes or additions to the json representation across Xen
releases.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
[update to v3.5.0-rc1, improve error reporting, use /bin/true emulator]
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Certain XML features that aren't in the <cpu> block map to -cpu
flags on the qemu cli. If one of these is specified but the user
didn't explicitly pass an XML <cpu> model, we need to format a
default model on the command line.
The current code handles this by sprinkling this default cpu handling
among all the different flag string formatting. Instead, switch it
to do this just once.
This alters some test output slightly: the previous code would
write the default -cpu in some cases when no flags were actually
added, so the output was redundant.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
My commit 0c1d863 broke formatting of passthrough smartcard devices:
<smartcard mode='passthrough' type='spicevmc'/>
resulted in invalid XML:
<smartcard mode='passthrough'>
type='spicevmc'>
<address type='ccid' controller='0' slot='0'/>
</smartcard>
Split out chardev source formatting function into two -
one formatting the attributes and other formatting the subelements.
Reported-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It turns out that our implementation of the hashing function is
endian-dependent and thus if used on various architectures the testsuite
may have different results. Work this around by mocking virHashCodeGen
to something which does not use bit operations instead of just setting a
deterministic seed.
Disk serial schema has extra '.+' allowed characters in comparison
with check in code. Looks like there is no reason for that as qemu
allows any character AFAIK for serial. This discrepancy is originated
in commit id '85d15b51' where the ability to add serial was added.
Alter the disk-serial test to add a disk with all the possible
characters listed as the serial value.
Prior to qemu 2.5 the node names would not be generated, thus would be
missing from 'query-blockstats' and 'query-named-block-nodes'. Test that
the code correctly detects nothing.
Additionally make sure that a VM without disks does not cause problems.
The test case change is necessary as our test file checker does not play
well with empty files.
Treat an NULL string equivalent to an empty string in
virTestCompareToFile so that callers don't need to add additional logic
in case when a test produces no output.
'virt-aa-helper' is compiled when both WITH_LIBVIRTD and
WITH_SECDRIVER_APPARMOR are defined. The test was run only when
WITH_SECDRIVER_APPARMOR was defined thus causing a build failure when
building without the daemon.
Driver modules proved to be reliable for a long time. Since support for
not building modules complicates the code and makefiles drop it.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
qemu 2.9 returns an extra layer in the backing data if a block job is
active. Add a test case to see whether our code properly detects and
ignores such layer.
The test data was prepared by creating a backing chain of qcow2 images
(with qemu-img and with libvirt's snapshot feature).
One of the layers was then merged back by doing a block-commit:
virsh blockcommit VM hda --top /var/lib/libvirt/images/b
and then a block-copy job was started and kept in synchronized phase:
virsh blockcopy VM hda /tmp/tgt.img --transient job
Reviewed-by: Eric Blake <eblake@redhat.com>
Add the blockstats data and fix the expected output.
Test data was created as:
qemu-img create -f qcow2 img0 10M
qemu-img create -f qcow2 -o "backing_fmt=qcow2,backing_file=img0" img1
qemu-img create -f qcow2 -o "backing_fmt=qcow2,backing_file=img1" img2
...
Reviewed-by: Eric Blake <eblake@redhat.com>
With the new approach we are actually able to correctly detect node
names for the two instances of the same backing file.
Test images were created as:
qemu-img create -f qcow2 /var/lib/libvirt/images/base.qcow2 10M
qemu-img create -f qcow2 \
-o "backing_fmt=qcow2,backing_file=/var/lib/libvirt/images/base.qcow2 \
/var/lib/libvirt/images/a.qcow2
qemu-img create -f qcow2 \
-o "backing_fmt=qcow2,backing_file=/var/lib/libvirt/images/base.qcow2 \
/var/lib/libvirt/images/b.qcow2
and then used for two separate disks.
Reviewed-by: Eric Blake <eblake@redhat.com>
We can now iterate the hash table and print all detected backing chains.
This simplifies calling of the test cases.
Reviewed-by: Eric Blake <eblake@redhat.com>
virHashNew calls virRandomBits to initialize seed for the hashing
function. If a test uses iteration through the hash table to produce
results they may/will be non-deterministic. Extract the mock library
which was used for mac address mapping to be universal.
Reviewed-by: Eric Blake <eblake@redhat.com>
Remove the complex and unreliable code which inferred the node name
hierarchy only from data returned by 'query-named-block-nodes'. It turns
out that query-blockstats contain the full hierarchy of nodes as
perceived by qemu so the inference code is not necessary.
In query blockstats, the 'parent' object corresponds to the storage
behind a storage volume and 'backing' corresponds to the lower level of
backing chain. Since all have node names this data can be really easily
used to detect node names.
In addition to the code refactoring the one remaining test case needed
to be fixed along.
Reviewed-by: Eric Blake <eblake@redhat.com>
Extract the test prefix path into a variable and reuse
virTestLoadFileJSON to load the sample json files rather than doing it
manually.
Reviewed-by: Eric Blake <eblake@redhat.com>
This new helper loads, parses and returns a JSON file from 'abs_srcdir'
By using variable arguments for the function, it's not necessary to
format the path separately in the test cases.
Reviewed-by: Eric Blake <eblake@redhat.com>
This new helper loads and returns a file from 'abs_srcdir'. By using
variable arguments for the function, it's not necessary to format the
path separately in the test cases.
Reviewed-by: Eric Blake <eblake@redhat.com>
The node name and backing file name can be inferred from the hierarchy.
This will also help when converting to detect node names using
query-blockstats data.
Reviewed-by: Eric Blake <eblake@redhat.com>
Rename 'json' and related variables to 'nodeNameJson'. Also rename the
test files along. This is a preparation for modifying how we detect node
names which will also require data from 'query-blockstats'.
Reviewed-by: Eric Blake <eblake@redhat.com>