This information will be used to select, and store in the guest
configuration in order to guarantee ABI stability, the concrete
(hypervisor-specific) model for serial devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Instead of validating each target type / address type combination
separately, create a small helper to perform the matching and
collapse all existing checks into a single one.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Instead of waiting until we get to command line generation, we can
validate the target for a char device much earlier.
Move all the checks out of qemuBuildSerialChrDeviceStr() and into
the new fuction. This will later allow us to validate the target
for platform devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Formatting the <target/> element for serial devices will become a
bit more complicated later on, and leaving the fallthrough behavior
there would do nothing but complicate it further.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Make the switch statement type-aware, avoid calling
virDomainChrTargetTypeToString() more than once and check its
return value before using it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function can fail, but none of the caller were accounting
for that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We don't need to store the return value since we never modify it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move formatting of the <target/> element for char devices out of
virDomainChrDefFormat() and into its own function.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This attribute was used to decide whether to format the type
attribute of the <target> element, but the logic didn't take into
account all possible cases and as such could lead to unexpected
results. Moreover, it's one more thing to keep track of, and can
easily fall out of sync with other attributes.
Now that we have VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE, we can
use that value to signal that no specific target type has been
configured for the serial device and as such the attribute should
not be formatted at all. All other values are now formatted.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is the first step in getting rid of the assumption that
isa-serial is the default target type for serial devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The devicePostParse() callback is invoked for all devices so that
drivers have a chance to set their own specific values; however,
virDomainDefAddImplicitDevices() runs *after* the devicePostParse()
callbacks have been invoked and can add new devices, in which case
the driver wouldn't have a chance to customize them.
Work around the issue by invoking the devicePostParse() callback
after virDomainDefAddImplicitDevices(), only for the first serial
devices, which might have been added by it. The same was already
happening for the first video device for the very same reason.
This will become important later on, when we will change
virDomainDefAddConsoleCompat() not to set a targetType for
automatically added serial devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Having a separate function for char device handling is better than
adding even more code to qemuDomainDeviceDefPostParse().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Our current documentation is missing some information and doesn't
do a great job at explaining how the <serial> and <console> elements
are connected. Let's try to fix that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This commit fixes the virsh prompt when reconnection to the same URI is
called: `virsh # connect --readonly` (Reconnect). The problem is
happening because the code is considering URI (name) as a mandatory
parameter to change the prompt. This commit remove the assignment into
`priv->readonly` from `if (name)` conditional.
Before:
virsh # uri
qemu:///system
virsh # connect --readonly
virsh #
After:
virsh # uri
qemu:///system
virsh # connect --readonly
virsh >
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1507737
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1425757
The blockdev-add code provides a mechanism to sanely provide user
and password-secret arguments for iscsi without placing them on the
command line to be viewable by a 'ps -ef' type command or needing
to create separate -iscsi devices for each disk/volume found.
So modify the iSCSI command line building to check for the presence
of the capability in order properly setup and use the domain master
secret object to encrypt the password in a secret object and alter
the parameters for the command line to utilize.
Modify the xml2argvtest to exhibit the syntax for both disk and
hostdev configurations.
Detect the capability via the query-qmp-schema for blockdev-add
to find the 'password-secret' parameter that will allow the iSCSI
code to use the master secret object to encrypt the secret for an
and only need to provide the object id of the secret on the command
line thus obsfuscating the passphrase.
Rather than picking apart the two pieces we need/want (path, hosts,
and auth)- let's allocate/use a virStorageSourcePtr for iSCSI storage.
The end result is that qemuBuildSCSIiSCSIHostdevDrvStr doesn't need
to "fake" one for the qemuBuildNetworkDriveStr call.
Libvirt prints an error on startup when it is missing host cpu model
information for any queried qemu binary. On s390 we only have host cpu model
information for kvm enabled qemu instances. So when virt type is not kvm, this
is actually not an error on s390.
This patch adds virt type as a parameter to virQEMUCapsInitCPUModelS390, and a
new return code 2 for virQEMUCapsInitCPUModel and virQEMUCapsInitCPUModelS390.
If the virt type is not kvm then we skip printing the scary error message
and return 2 because this case is actually expected behavior. The new return
code is meant to differentiate between the failure case and the case where we
simply expect the cpu model information to be unattainable.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit id '5d5c732d7' had an incorrect assignment and was found
by travis build:
storage/storage_driver.c:1668:14: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
if ((obj == virStoragePoolObjListSearch(&driver->pools,
~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Create an API to search through the storage pool objects looking for
a specific truism from a callback API in order to return the specific
storage pool object that is desired.
Create an API to walk the pools->objs[] list in order to perform a
callback function for each element of the objs array that doesn't care
about whether the action succeeds or fails as the desire is to run the
code over every element in the array rather than fail as soon as or if
one fails.
For now it'll just call the virStoragePoolObjUnlock, but a future
adjustment will do something different. Since the new API will check
for a NULL object before the Unlock call, callers no longer need to
check for NULL before calling.
The virStoragePoolObjUnlock is now private/static to virstorageobj.c
with a short term forward reference.
Commit id '36555364' removed the setting of the driver->privileged,
which the udevProcessPCI would need in order to read the PCI device
configs.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the setup of the disk attribute to the disk source prepare function
which will allow proper usage with JSON props and move the fallback
(legacy) generating code into the block which is executed with legacy
options.
As a side-effect of this change we can clean up propagation of 'cfg'
into the command generator.
Also it's nice to see that the test output is the same even when the
value is generated in a different place.
Some drive backends allow output of debugging information which can be
configured using properties of the image. Add fields to virStorageSource
which will allow configuring them.
The 'file.password-secret' injection should be used only if we are using
the old formatter. When formatting the source string from the JSON
properties, the property should be added there.
Also drop the comment which refers to stuff that will not be used in
libvirt since -blockdev is the way to go.
My latest commit of a785186446 uncovered a problem we fixed
in 9eb23fe2 but then reverted in 834c5720e4. Turns out, some
systems (I'm looking at you OS X) have ancient readline with
broken header file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Qemu has now an internal mechanism for locking images to fix specific
cases of disk corruption. This requires libvirt to mark the image as
shared so that qemu lifts certain restrictions.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378242
'share-rw' for the disk device configures qemu to allow concurrent
access to the backing storage.
The capability is checked in various supported disk frontend buses since
it does not make sense to partially backport it.
Creating a snapshot would introduce a possibly unsupported member for
sharing into the backing chain. Add a check to prevent that from
happening.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511480
Disk sharing between two VMs may corrupt the images if the format driver
does not support it. Check that the user declared use of a supported
storage format when they want to share the disk.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511480
Storage source format backing a shared device (e.g. running a cluster
filesystem) needs to support the sharing so that metadata are not
corrupted. Add a central function for checking this.
