Driver modules proved to be reliable for a long time. Since support for
not building modules complicates the code and makefiles drop it.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
If a domain name contains a '=' and the unix socket path is
auto-generated or socket path provided by user contains '=' QEMU
is unable to properly parse the command line. In order to make it
work we need to use the new command line syntax for VNC if it's
available, otherwise we can use the old syntax.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1352529
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
qemu 2.9 returns an extra layer in the backing data if a block job is
active. Add a test case to see whether our code properly detects and
ignores such layer.
The test data was prepared by creating a backing chain of qcow2 images
(with qemu-img and with libvirt's snapshot feature).
One of the layers was then merged back by doing a block-commit:
virsh blockcommit VM hda --top /var/lib/libvirt/images/b
and then a block-copy job was started and kept in synchronized phase:
virsh blockcopy VM hda /tmp/tgt.img --transient job
Reviewed-by: Eric Blake <eblake@redhat.com>
Add the blockstats data and fix the expected output.
Test data was created as:
qemu-img create -f qcow2 img0 10M
qemu-img create -f qcow2 -o "backing_fmt=qcow2,backing_file=img0" img1
qemu-img create -f qcow2 -o "backing_fmt=qcow2,backing_file=img1" img2
...
Reviewed-by: Eric Blake <eblake@redhat.com>
With the new approach we are actually able to correctly detect node
names for the two instances of the same backing file.
Test images were created as:
qemu-img create -f qcow2 /var/lib/libvirt/images/base.qcow2 10M
qemu-img create -f qcow2 \
-o "backing_fmt=qcow2,backing_file=/var/lib/libvirt/images/base.qcow2 \
/var/lib/libvirt/images/a.qcow2
qemu-img create -f qcow2 \
-o "backing_fmt=qcow2,backing_file=/var/lib/libvirt/images/base.qcow2 \
/var/lib/libvirt/images/b.qcow2
and then used for two separate disks.
Reviewed-by: Eric Blake <eblake@redhat.com>
We can now iterate the hash table and print all detected backing chains.
This simplifies calling of the test cases.
Reviewed-by: Eric Blake <eblake@redhat.com>
virHashNew calls virRandomBits to initialize seed for the hashing
function. If a test uses iteration through the hash table to produce
results they may/will be non-deterministic. Extract the mock library
which was used for mac address mapping to be universal.
Reviewed-by: Eric Blake <eblake@redhat.com>
Remove the complex and unreliable code which inferred the node name
hierarchy only from data returned by 'query-named-block-nodes'. It turns
out that query-blockstats contain the full hierarchy of nodes as
perceived by qemu so the inference code is not necessary.
In query blockstats, the 'parent' object corresponds to the storage
behind a storage volume and 'backing' corresponds to the lower level of
backing chain. Since all have node names this data can be really easily
used to detect node names.
In addition to the code refactoring the one remaining test case needed
to be fixed along.
Reviewed-by: Eric Blake <eblake@redhat.com>
The same operation will become useful in other places so rename the
function to be more generic and move it to the top so that it can be
reused earlier in the file.
Reviewed-by: Eric Blake <eblake@redhat.com>
Extract the test prefix path into a variable and reuse
virTestLoadFileJSON to load the sample json files rather than doing it
manually.
Reviewed-by: Eric Blake <eblake@redhat.com>
This new helper loads, parses and returns a JSON file from 'abs_srcdir'
By using variable arguments for the function, it's not necessary to
format the path separately in the test cases.
Reviewed-by: Eric Blake <eblake@redhat.com>
This new helper loads and returns a file from 'abs_srcdir'. By using
variable arguments for the function, it's not necessary to format the
path separately in the test cases.
Reviewed-by: Eric Blake <eblake@redhat.com>
The node name and backing file name can be inferred from the hierarchy.
This will also help when converting to detect node names using
query-blockstats data.
Reviewed-by: Eric Blake <eblake@redhat.com>
Rename 'json' and related variables to 'nodeNameJson'. Also rename the
test files along. This is a preparation for modifying how we detect node
names which will also require data from 'query-blockstats'.
Reviewed-by: Eric Blake <eblake@redhat.com>
Test cases named '1' and '2' differed only in the length of the backing
chain, so remove test case '2' and rename test '1' to 'basic'.
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow getting the raw data from query-blockstats, so that we can use it
to detect the backing chain later on.
Reviewed-by: Eric Blake <eblake@redhat.com>
Disallow providing the wwnn/wwpn of the HBA in the adapter XML:
<adapter type='fc_host' [parent='scsi_hostN'] wwnn='HBA_wwnn'
wwpn='HBA_wwpn'/>
This should be considered a configuration error since a vHBA
would not be created. In order to use the HBA as the backing the
following XML should be used:
<adapter type='scsi_host' name='scsi_hostN'/>
So add a check prior to the checkParent call to validate that
the provided wwnn/wwpn resolves to a vHBA and not an HBA.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since commit 2e6ecba1bc, the pointer to the qemu driver is saved in
domain object's private data and hence does not have to be passed as
yet another parameter if domain object is already one of them.
This is a first (example) patch of this kind of clean up, others will
hopefully follow.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In order not to make the build even less reproducible, honour
SOURCE_DATE_EPOCH environment variable as specified:
https://reproducible-builds.org/specs/source-date-epoch/
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While using "definitely-not-virtio" as a model name is very
cute, it will also cause the relevant test to fail once we
introduce stricter validation.
Use "e1000", which is definitely not virtio but also a valid
model name, instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The switch contains considerable amount of changes:
virQEMUCapsRememberCached() is removed because this is now handled
by virFileCacheSave().
virQEMUCapsInitCached() is removed because this is now handled by
virFileCacheLoad().
virQEMUCapsNewForBinary() is split into two functions,
virQEMUCapsNewData() which creates new data if there is nothing
cached and virQEMUCapsLoadFile() which loads the cached data.
This is now handled by virFileCacheNewData().
virQEMUCapsCacheValidate() is removed because this is now handled by
virFileCacheValidate().
virQEMUCapsCacheFree() is removed because it's no longer required.
Add virCapsPtr into virQEMUCapsCachePriv because for each call of
virFileCacheLookup*() we need to use current virCapsPtr.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This is a preparation for following patches where we switch to
virFileCache for QEMU capabilities cache
The host arch will always remain the same but virCaps may change. Now
the host arch is stored while creating new qemu capabilities cache.
It removes the need to pass virCaps into virQEMUCapsCache*() functions.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Move all the host CPU data into a separate file and rewrite qemucpumock
to not use passed @caps. This is preparation for following patch which
will replace virCaps argument with virArch.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This will store private data that will be used by following patches
when switching to virFileCache.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Implements 3 test cases that covers how the cache is used.
We have to mock unlink() function because the caching code unlinks
files that are no longer valid and we don't want to do it in our tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The new virFileCache will nicely handle the caching logic for any data
that we would like to cache. For each type of data we will just need
to implement few handlers that will take care of creating, validating,
loading and saving the cached data.
The cached data must be an instance of virObject.
Currently we cache QEMU capabilities which will start using
virFileCache.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
It's possible to have more than one unnamed virtio-serial unix channel.
We need to generate a unique name for each channel. Currently, we use
".../unknown.sock" for all of them. Better practice would be to specify
an explicit target path name; however, in the absence of that, we need
uniqueness in the names we generate internally.
Before the changes we'd get /var/lib/libvirt/qemu/channel/target/unknown.sock
for each instance of
<channel type='unix'>
<source mode='bind'/>
<target type='virtio'/>
</channel>
Now, we get vioser-00-00-01.sock, vioser-00-00-02.sock, etc.
Signed-off-by: Scott Garfinkle <seg@us.ibm.com>
It is more related to a domain as we might use it even when there is
no systemd and it does not use any dbus/systemd functions. In order
not to use code from conf/ in util/ pass machineName in cgroups code
as a parameter. That also fixes a leak of machineName in the lxc
driver and cleans up and de-duplicates some code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This way the function can work as a central point of clean-up code and
we don't have to duplicate code. And it works similarly to the qemu
driver.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Rather than rely on virSecretObjEndAPI to make the final virObjectUnref
after the call to virSecretObjListRemove, be more explicit by calling
virObjectUnref and setting @obj to NULL for secretUndefine and in
the error path of secretDefineXML. Calling EndAPI will end up calling
Unlock on an already unlocked object which has indeteriminate results
(usually an ignored error).
The virSecretObjEndAPI will both Unref and Unlock the object; however,
the virSecretObjListRemove would have already Unlock'd the object so
calling Unlock again is incorrect. Once the virSecretObjListRemove
is called all that's left is to Unref our interest since that's the
corrollary to the virSecretObjListAdd which returned our ref interest
plus references for each hash table in which the object resides. In math
terms, after an Add there's 2 refs on the object (1 for the object and
1 for the list). After calling Remove there's just 1 ref on the object.
For the Add callers, calling EndAPI removes the ref for the object and
unlocks it, but since it's in a list the other 1 remains.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the virSecretLoadValue fails, the code jumped to cleanup without
setting @ret = obj, thus calling virSecretObjListRemove which only
accounts for the object reference related to adding the object to
the list during virSecretObjListAdd, but does not account for the
reference to the object itself as the return of @ret would be NULL
so the caller wouldn't call virSecretObjEndAPI on the object recently
added thus reducing the refcnt to zero.
This patch will perform the ObjListRemove in the failure path of
virSecretLoadValue and Unref @obj in order to perform clean up
and return @obj as NULL. The @def will be freed as part of the
virObjectUnref.
